Three point charges are on the x axis: -9 μC at -3 m, 10 µC at the origin, and -6 µC at 3 m. Find the force on the first charge. The value of the Coulomb constant is 8.98755 x 10° N-m²/C². Answer in units of N.

The resistance of the metal resistor would be 10.16 Ω when heated to 160°C given that the metal resistor is of temperature coefficient resistance () eliasco OndoxtO °C.

Given that resistance at 0°C is 10Ω. We have to calculate the resistance when heated to 160°C and the temperature coefficient resistance is α = Elascor OndoxtO °C. Let the final resistance be R. Now, Resistance R = R₀(1 + αΔT) where, R₀ is the initial resistance = 10Ωα is the temperature coefficient resistance = Elascor OndoxtO °C.

ΔT is the change in temperature = T₂ - T₁ = 160°C - 0°C = 160°C

So, R = R₀(1 + αΔT) = 10(1 + Elascor OndoxtO °C × 160°C) = 10 (1 + 0.016) = 10.16 Ω

Therefore, when heated to 160°C, the resistance of the metal resistor would be 10.16 Ω.

More on resistance: https://brainly.com/question/17137548

#SPJ11

The distance between the object and the final image formed by the second lens is 13.08 cm and the overall magnification is -0.681.

To find the distance between the object and the final image formed by the second lens, we can use the lens formula:

1/f = 1/v - 1/u

where f is the focal length, v is the image distance, and u is the object distance.

For the first lens with a focal length of +8.5 cm, the object distance (u) is -18.8 cm (negative since it is to the left of the lens). Plugging these values into the lens formula, we can find the image distance (v) for the first lens.

1/8.5 = 1/v - 1/(-18.8)

v = -11.3 cm

Now, for the second lens with a focal length of -30 cm, the object distance (u) is +5.73 cm (positive since it is to the right of the lens). Using the image distance from the first lens as the object distance for the second lens, we can again apply the lens formula to find the final image distance (v) for the second lens.

1/-30 = 1/v - 1/(-11.3 + 5.73)

v = 13.08 cm

Therefore, the distance between the object and the final image formed by the second lens is 13.08 cm.

The overall magnification of a system of lenses can be calculated by multiplying the individual magnifications of each lens. The magnification of a single lens is given by:

m = -v/u

where m is the magnification, v is the image distance, and u is the object distance.

For the first lens, the magnification (m1) is -(-11.3 cm)/(-18.8 cm) = 0.601.

For the second lens, the magnification (m2) is 13.08 cm/(5.73 cm) = 2.284.

To find the overall magnification, we multiply the individual magnifications:

Overall magnification = m1 * m2 = 0.601 * 2.284 = -1.373

Therefore, the overall magnification is -0.681, indicating a reduction in size.

To learn more about magnification , click here : https://brainly.com/question/2648016

#SPJ11

Re₂ = (ρ * v₂ * d₂) / μ, we need additional information about the fluid density (ρ) and velocity (v₂) to calculate the Reynolds number for the nozzle.To calculate the Reynolds number for flow in the hose and nozzle, we use the formula:

Re = (ρ * v * d) / μ

where Re is the Reynolds number, ρ is the density of the fluid, v is the velocity of the fluid, d is the diameter of the pipe (twice the radius), and μ is the viscosity of the fluid.


Hose radius (r₁) = 0.750 cm = 0.00750 m
Nozzle radius (r₂) = 0.410 cm = 0.00410 m
Flow rate (Q) = 0.340 L/s = 0.000340 m³/s
Viscosity of water (μ) = 1.005 x 10⁻³ N/m²s

(a) For flow in the hose:
Diameter (d₁) = 2 * r₁ = 2 * 0.00750 m = 0.015 m

Using the formula, Re₁ = (ρ * v₁ * d₁) / μ, we need additional information about the fluid density (ρ) and velocity (v₁) to calculate the Reynolds number for the hose.

(b) For flow in the nozzle:
Diameter (d₂) = 2 * r₂ = 2 * 0.00410 m = 0.00820 m

Using the formula, Re₂ = (ρ * v₂ * d₂) / μ, we need additional information about the fluid density (ρ) and velocity (v₂) to calculate the Reynolds number for the nozzle.

 To  learn  more  about radius click on:brainly.com/question/24051825

#SPJ11

The number of moles of oxygen gas in the container is determined by the ideal gas law, using the given volume, temperature, and pressure 0.993 moles.

To determine the number of moles of oxygen gas in the container, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, let's convert the given temperature from Fahrenheit to Kelvin:

T(K) = (T(°F) + 459.67) × (5/9)

T(K) = (17.84 + 459.67) × (5/9)

T(K) ≈ 259.46 K

Next, we convert the given pressure from kilopascals (kPa) to pascals (Pa):

P(Pa) = P(kPa) × 1000

P(Pa) = 16.63 kPa × 1000

P(Pa) = 16630 Pa

Now, we can rearrange the ideal gas law equation to solve for n (number of moles):

n = PV / RT

Substituting the known values:

n = (16630 Pa) × (2.90 m³) / ((8.314 J/(mol·K)) × (259.46 K))

Simplifying the equation:

n ≈ 0.993 moles

Therefore, the number of moles of oxygen gas in the container is approximately 0.993 moles.

To learn more about moles click here:

brainly.com/question/15209553

#SPJ11

(a) Angular speed: 60.3 rad/s

(b) Angular acceleration: 0.244 rad/s²

(c) Distance moved: 5182.4 meters

(a) To find the angular speed of the tires about their axles, we can use the formula:

Angular speed (ω) = Linear speed (v) / Radius (r)

First, let's convert the speed from km/h to m/s:

76.0 km/h = (76.0 km/h) * (1000 m/km) * (1/3600 h/s) ≈ 21.1 m/s

The radius of the tire is half of its diameter:

Radius (r) = 70.0 cm / 2 = 0.35 m

Now we can calculate the angular speed:

Angular speed (ω) = 21.1 m/s / 0.35 m ≈ 60.3 rad/s

Therefore, the angular speed of the tires about their axles is approximately 60.3 rad/s.

(b) To find the magnitude of the angular acceleration of the wheels, we can use the formula:

Angular acceleration (α) = Change in angular velocity (Δω) / Time (t)

The change in angular velocity can be found by subtracting the initial angular velocity (ω_i = 60.3 rad/s) from the final angular velocity (ω_f = 0 rad/s), as the car is brought to a stop:

Δω = ω_f - ω_i = 0 rad/s - 60.3 rad/s = -60.3 rad/s

The time (t) is given as 39.0 complete turns of the tires. One complete turn corresponds to a full circle, or 2π radians. Therefore:

Time (t) = 39.0 turns * 2π radians/turn = 39.0 * 2π rad

Now we can calculate the magnitude of the angular acceleration:

Angular acceleration (α) = (-60.3 rad/s) / (39.0 * 2π rad) ≈ -0.244 rad/s²

The magnitude of the angular acceleration of the wheels is approximately 0.244 rad/s².

(c) To find the distance the car moves during the braking, we can use the formula:

Distance (d) = Linear speed (v) * Time (t)

The linear speed is given as 21.1 m/s, and the time is the same as calculated before:

Time (t) = 39.0 turns * 2π radians/turn = 39.0 * 2π rad

Now we can calculate the distance:

Distance (d) = 21.1 m/s * (39.0 * 2π rad) ≈ 5182.4 m

Therefore, the car moves approximately 5182.4 meters during the braking.

To learn more about angular acceleration, Visit:

https://brainly.com/question/13014974

#SPJ11

The given statement, "Destructive interference of two superimposed waves requires the waves to travel in opposite directions" is false because destructive interference of two superimposed waves requires the waves to be traveling in the same direction and having a phase difference of π or an odd multiple of π.

In destructive interference, the two waves will have a phase difference of either an odd multiple of π or an odd multiple of 180 degrees. When the phase difference is an odd multiple of π, it results in a complete cancellation of the two waves in the region where they are superimposed and the resultant wave has zero amplitude. In constructive interference, the two waves will have a phase difference of either an even multiple of π or an even multiple of 180 degrees. When the phase difference is an even multiple of π, it results in a reinforcement of the two waves in the region where they are superimposed and the resultant wave has maximum amplitude.

Learn more about Destructive interference at https://brainly.com/question/23594941

#SPJ11

Option 2 will produce the largest acceleration.

To calculate the changes that will produce the largest acceleration, let us first consider the following formula:

F = ma

where,

F = force applied

m = mass

a = acceleration

We can assume that the force applied will be constant; hence, by reducing the drag coefficient or the mass of the car, we can observe an increase in the car's acceleration.

Option 2 will produce the largest acceleration if we consider the formula.

When we change the racecar's mass by 25% by removing unnecessary items and using lighter weight materials, we decrease the mass.

If the mass of the car is reduced, acceleration will increase accordingly.

The second option, which is to remove unnecessary items and use lighter weight materials so that the car's mass is 25% smaller, will produce the largest acceleration.

Learn more about the acceleration:

brainly.com/question/25876659

#SPJ11

The distance Δx between the points where the ions strike the detector is 0.0971 meters. In a mass spectrometer, ions are accelerated by a potential difference and then move in a circular path due to the presence of a magnetic field.

To solve this problem, we can use the equation for the radius of the circular path:

r = (m*v) / (|q| * B)

where m is the mass of the ion, v is its velocity, |q| is the magnitude of the charge, and B is the magnetic field strength. Since the ions are accelerated from rest, we can use the equation for the kinetic energy to find their velocity:

KE = q * V

where KE is the kinetic energy, q is the charge, and V is the potential difference.

Once we have the radius, we can calculate the distance Δx between the two points where the ions strike the detector. Since the ions follow circular paths with the same radius, the distance between the two points is equal to the circumference of the circle, which is given by:

Δx = 2 * π * r

By substituting the given values into the equations and performing the calculations, we find that Δx is approximately 0.0971 meters.

To learn more about distance click here brainly.com/question/31713805

#SPJ11

In this scenario, a lens with a focal length of 20 mm is used to form an image of an object located 50 mm away from the lens along its optic axis. The object has a height of 10 mm. By applying the thin lens formula and magnification formula, we can calculate the location and size of the image formed. The image is inverted and located 100 mm away from the lens, with a height of -5 mm.

To determine the location and size of the image formed by the lens, we can use the thin lens formula:

1/f = 1/v - 1/u,

where f represents the focal length of the lens, v is the image distance from the lens, and u is the object distance from the lens. Plugging in the values, we have:

1/20 = 1/v - 1/50.

Solving this equation gives us v = 100 mm. The positive value indicates that the image is formed on the opposite side of the lens (real image).

Next, we can calculate the size of the image using the magnification formula:

m = -v/u,

where m represents the magnification. Plugging in the values, we get:

m = -100/50 = -2.

The negative sign indicates an inverted image. The magnification value of -2 tells us that the image is two times smaller than the object.

Finally, to calculate the height of the image, we multiply the magnification by the object height:

h_image = m * h_object = -2 * 10 mm = -20 mm.

The negative sign indicates that the image is inverted, and the height of the image is 20 mm.

Therefore, the image formed by the lens is inverted, located 100 mm away from the lens, and has a height of -20 mm.

Learn more about height here :

brainly.com/question/29131380

#SPJ11

The final image distance of the object, if the object is located 15 cm from one of the lenses is 6 cm. So none of the options are correct.

To determine the final image distance of the object in the given setup of two converging lenses, we can use the lens formula:

1/f = 1/di - 1/do

Where: f is the focal length of the lens, di is the image distance, do is the object distance.

Given that both lenses have the same focal length of 10 cm, we can consider them as a single lens with an effective focal length of 10 cm. The lenses are 40 cm apart, and the object distance (do) is 15 cm.

Using the lens formula, we can rearrange it to solve for di:

1/di = 1/f + 1/do

1/di = 1/10 cm + 1/15 cm

= (15 + 10) / (10 * 15) cm⁻¹

= 25 / 150 cm⁻¹

= 1 / 6 cm⁻¹

di = 1 / (1 / 6 cm⁻¹) = 6 cm

Therefore, the final image distance of the object is 6 cm. So, none of the options are correct.

To learn more about focal length: https://brainly.com/question/9757866

#SPJ11

An isotope of Sodium undergoing β decay by emitting a positron (positively charged electron) will transform into a different element. Specifically, it will become an isotope of Magnesium.

β decay involves the transformation of a neutron into a proton within the nucleus of an atom. In this process, a high-energy electron, called a beta particle (β-), is emitted when a neutron is converted into a proton. However, in the case of β+ decay, a proton within the nucleus is converted into a neutron, and a positron (β+) is emitted.

Since the isotope of Sodium undergoes β decay by emitting a positron, one of its protons is converted into a neutron. This transformation changes the atomic number of the nucleus, and the resulting element will have one fewer proton. Sodium (Na) has an atomic number of 11, while Magnesium (Mg) has an atomic number of 12. Therefore, the isotope of Sodium, after β+ decay, becomes an isotope of Magnesium.

learn more about "electron":- https://brainly.com/question/860094

#SPJ11

The electric field (E) is along the y-axis and given by E(y, t) = 300 sin(2π(3.0 GHz)t) V/m. The magnetic field (B) is along the x-axis and given by B(y, t) = (300 V/m) / (3.0 x 10^8 m/s) sin(2π(3.0 GHz)t).

The general expression for an electromagnetic wave in free space can be written as:

E(x, t) = E0 sin(kx - ωt + φ)

where:

E(x, t) is the electric field as a function of position (x) and time (t),

E0 is the amplitude of the electric field,

k is the wave number (related to the wavelength λ by k = 2π/λ),

ω is the angular frequency (related to the frequency f by ω = 2πf),

φ is the phase constant.

For the given wave with an electric field parallel to the axis (along the y-axis) and traveling in the +y direction, the expression can be simplified as:

E(y, t) = E0 sin(ωt)

where:

E(y, t) is the electric field as a function of position (y) and time (t),

E0 is the amplitude of the electric field,

ω is the angular frequency (related to the frequency f by ω = 2πf).

In this case, the electric field remains constant in magnitude and direction as it propagates in the +y direction. The amplitude of the electric field is given as 300 V/m, so the expression becomes:

E(y, t) = 300 sin(2π(3.0 GHz)t)

Now let's consider the magnetic field associated with the electromagnetic wave. The magnetic field is perpendicular to the electric field and the direction of wave propagation (perpendicular to the y-axis). Using the right-hand rule, the magnetic field can be determined to be in the +x direction.

The expression for the magnetic field can be written as:

B(y, t) = B0 sin(kx - ωt + φ)

Since the magnetic field is perpendicular to the electric field, its amplitude (B0) is related to the amplitude of the electric field (E0) by the equation B0 = E0/c, where c is the speed of light. In this case, the wave is propagating in free space, so c = 3.0 x 10^8 m/s.

Therefore, the expression for the magnetic field becomes:

B(y, t) = (E0/c) sin(ωt)

Substituting the value of E0 = 300 V/m and c = 3.0 x 10^8 m/s, the expression becomes:

B(y, t) = (300 V/m) / (3.0 x 10^8 m/s) sin(2π(3.0 GHz)t)

To summarize:

- The electric field (E) is along the y-axis and given by E(y, t) = 300 sin(2π(3.0 GHz)t) V/m.

- The magnetic field (B) is along the x-axis and given by B(y, t) = (300 V/m) / (3.0 x 10^8 m/s) sin(2π(3.0 GHz)t).

Visit here to learn more about electric field brainly.com/question/11482745
#SPJ11

Given that an object is dropped from rest on another planet and hits the ground, travelling a distance of 0.8 m in 0.5 s and bounces back up and stops exactly where it started from.

Let's find out the acceleration of gravity on this planet. Step-by-step explanation: a) To calculate the acceleration of gravity on this planet, we use the formula  d = 1/2 gt².Using this formula, we get0.8 m = 1/2 g (0.5 s)²0.8 m = 0.125 g0.125 g = 0.8 mg = 0.8/0.125g = 6.4 m/s²The acceleration of gravity on this planet is 6.4 m/s².b) Taking downward to be positive, the ball's average speed is equal to its magnitude of average velocity on the way down.

Therefore, the average speed of the ball is equal to the magnitude of its average velocity on the way down.c) The ball's initial speed (when dropped) is zero, so the magnitude of its average velocity on the way up is equal to its final velocity divided by the time taken to stop. Using the formula v = u + gt where v = 0 m/s and u = -6.4 m/s² (negative because the ball is moving up), we get0 = -6.4 m/s² + g*t t = 6.4/gt = √(0.8 m/6.4 m/s²)t = 0.2 seconds.

To know more about distance visit:

https://brainly.com/question/13034462

#SPJ11

1) a) Erot = 0.036 J, b) Vmax = 0.095 m/s, c) x when v = 10.0 m/s:

2) The net electrostatic force experienced is 1.08 x 10⁻¹⁴ N to the left.

a) Erot (the total mechanical energy in the system) The total mechanical energy in a spring-mass system that consists of a 4.00 kg mass on a frictionless surface attached to a spring with a spring constant of 1.60x10° N/m is:

Erot = (1/2)kA²where k is the spring constant and A is the amplitude of the oscillation

Therefore, Erot = (1/2)(1.60 × 10°)(0.150²)J = 0.036 J

b) Vmax

The maximum speed, Vmax can be calculated as follows: Vmax = Aω, where ω is the angular frequency of oscillation.

ω = (k/m)¹/²= [(1.60x10⁰)/4.00]¹/²= 0.632 rad/s

Therefore,Vmax = Aω= 0.150 m x 0.632 rad/s= 0.095 m/s

c) x when v = 10.0 m/s

The speed of the mass is given by the expression: v = ±Aω cos(ωt)Let t = 0, v = Vmax = 0.095 m/s

Let x be the displacement of the mass at this instant.

x = A cos(ωt) = A = 0.150 m

We can find t using the equation: v = -Aω sin(ωt)t = asin(v/(-Aω)), where a is the amplitude of the oscillation and is positive since A is positive; and the negative sign is because v and Aω are out of phase.

The time is, therefore,t = asin(v/(-Aω)) = asin(10.0/(-0.150 x 0.632))= asin(-106.05)

Note that the value of sin θ cannot exceed ±1. Therefore, the argument of the inverse sine function must be between -1 and 1. Since the argument is outside this range, it is impossible to find a time at which the mass will have a speed of 10.0 m/s.

Therefore, no real solution exists for x.

2) When a proton is positioned at the point, P, in the figure above, the net electrostatic force it experiences can be calculated using the equation: F = k(q₁q₂/r²)where F is the electrostatic force, k is Coulomb's constant, q₁ and q₂ are the charges on the two particles, and r is the distance between them.

The proton is positioned to the right of the -3.00 µC charge and to the left of the +1.00 µC charge. The electrostatic force exerted on the proton by the -3.00 µC charge is to the left, while the electrostatic force exerted on it by the +1.00 µC charge is to the right. Since the net force is the vector sum of these two forces, it is the difference between them.

Fnet = Fright - Fleft= k(q₁q₂/r₂ - q₁q₂/r₁), where r₂ is the distance between the proton and the +1.00 µC charge, and r₁ is the distance between the proton and the -3.00 µC charge, r₂ = 0.040 m - 0.020 m = 0.020 mr₁ = 0.060 m + 0.020 m = 0.080 m

Substituting the given values and evaluating,

Fnet = (8.99 x 10⁹ N.m²/C²)(1.60 x 10⁻¹⁹ C)(3.00 x 10⁻⁶ C/0.020 m²) - (8.99 x 10⁹ N.m²/C²)(1.60 x 10⁻¹⁹ C)(1.00 x 10⁻⁶ C/0.080 m²)

Fnet = 1.08 x 10^-14 N to the left.

Answer:

a) Erot = 0.036 J, Vmax = 0.095 m/s, c) x when v = 10.0 m/s: No real solution exists for x.

2) The net electrostatic force experienced by the proton when it is positioned at point P in the figure above is 1.08 x 10^-14 N to the left.

To learn about electrostatic force here:

https://brainly.com/question/30534697

#SPJ11

Part 1: The acceleration due to gravity on this planet is approximately 6.27 m/s^2.

Part 2: The speed of the small nut when it hits the ground, taking into account air resistance, is approximately 8.66 m/s.

** Part 1: To calculate the acceleration due to gravity on the distant planet, we can use the equation of motion for free fall:

v^2 = u^2 + 2as

where v is the final velocity (19.4 m/s), u is the initial velocity (0 m/s), a is the acceleration due to gravity, and s is the displacement (30 m).

Rearranging the equation, we have:

a = (v^2 - u^2) / (2s)

a = (19.4^2 - 0^2) / (2 * 30)

a = 376.36 / 60

a ≈ 6.27 m/s^2

Therefore, the acceleration due to gravity on this planet is approximately 6.27 m/s^2.

** Part 2: Considering air resistance, we need to account for the work done by air resistance, which is equal to the change in mechanical energy.

The initial potential energy of the small nut is given by:

PE = mgh

where m is the mass of the nut (0.75 kg), g is the acceleration due to gravity (6.27 m/s^2), and h is the height (30 m).

PE = 0.75 * 6.27 * 30

PE = 141.675 J

Since the work done by air resistance is 20% of the initial potential energy, we can calculate it as:

Work = 0.2 * PE

Work = 0.2 * 141.675

Work = 28.335 J

The work done by air resistance is equal to the change in kinetic energy of the nut:

Work = ΔKE = KE_final - KE_initial

KE_final = KE_initial + Work

Since the initial kinetic energy is 0, the final kinetic energy is equal to the work done by air resistance:

KE_final = 28.335 J

Using the kinetic energy formula:

KE = (1/2)mv^2

v^2 = (2 * KE_final) / m

v^2 = (2 * 28.335) / 0.75

v^2 ≈ 75.12

v ≈ √75.12

v ≈ 8.66 m/s

Therefore, the speed of the small nut when it hits the ground, taking into account air resistance, is approximately 8.66 m/s.

To learn more about air resistance: https://brainly.com/question/30199019

#SPJ11

The problem involves two point charges that are 7 cm apart and have a total charge of 29 nC.

To determine the values of the individual charges, we can set up a system of equations based on Coulomb's law and solve for the unknown charges.

Coulomb's law states that the electric force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

Mathematically, it can be expressed as F = k * (|q1| * |q2|) /[tex]r^2[/tex], where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the distance between the charges.

In this problem, we are given that the charges are 7 cm apart (r = 7 cm) and the total charge is 29 nC. Let's denote the two unknown charges as q1 and q2.

Since the total charge is positive, we know that the charges on the two objects must have opposite signs. We can set up the following equations based on Coulomb's law:

k * (|q1| * |q2|) / [tex]r^2[/tex]= F

q1 + q2 = 29 nC

By substituting the given values and using the value of the electrostatic constant (k = 8.99x10^9 N [tex]m^2[/tex]/[tex]c^2[/tex]), we can solve the system of equations to find the values of q1 and q2, which represent the two charges.

Learn more about charges from the given link:

https://brainly.com/question/28721069

#SPJ11

The phase angle in a series R L C circuit at resonance is 0 (option c).

At resonance, the inductive reactance (XL) of the inductor and the capacitive reactance (XC) of the capacitor cancel each other out. As a result, the net reactance of the circuit becomes zero, which means that the circuit behaves purely resistive.

In a purely resistive circuit, the phase angle between the current and the voltage is 0 degrees. This means that the current and the voltage are in phase with each other. They reach their maximum and minimum values at the same time.

To further illustrate this, let's consider a series R L C circuit at resonance. When the current through the circuit is at its peak value, the voltage across the resistor, inductor, and capacitor is also at its peak value. Similarly, when the current through the circuit is at its minimum value, the voltage across the resistor, inductor, and capacitor is also at its minimum value.

Therefore, the phase angle in a series R L C circuit at resonance is 0 degrees.

Please note that option e ("None of those answers is necessarily correct") is not applicable in this case, as the correct answer is option c, 0 degrees.

To know more about circuit visit:

https://brainly.com/question/12608516

#SPJ11

The radius of Comet C is approximately 5.87 x 10^-6 meters, given its mass of 498 kg and gravitational acceleration of 31 m/s².

To calculate the radius of Comet C, we can use the formula for gravitational acceleration:

a = G * (m / r²),

where:

We can rearrange the formula to solve for r:

r² = G * (m / a).

Substituting the given values:

G = 6.67430 x 10^-11 m³/(kg·s²),

m = 498 kg, and

a = 31 m/s²,

we can calculate the radius:

r² = (6.67430 x 10^-11 m³/(kg·s²)) * (498 kg / 31 m/s²).

r² = 1.0684 x 10^-9 m⁴/(kg·s²) * kg/m².

r² = 3.4448 x 10^-11 m².

Taking the square root of both sides:

r ≈ √(3.4448 x 10^-11 m²).

r ≈ 5.87 x 10^-6 m.

Therefore, the radius of Comet C is approximately 5.87 x 10^-6 meters.

To learn more about gravitational acceleration, Visit:

https://brainly.com/question/14374981

#SPJ11

The spring constant of the spring is approximately 1.90 × 10⁻¹⁷ N/m. This value is obtained by substituting the mass of the object (0.191 kg) and the time period of oscillation (4.35536 × 10¹⁴ s²) into the formula for the spring constant (k = (4π²m) / T²).

According to the information provided, a positively-charged object with a mass of 0.191 kg oscillates at the end of a spring, generating ELF (extremely low frequency) radio waves that have a wavelength of 4.40×10^7 m.

The frequency of these radio waves is the same as the frequency at which the object oscillates. We have to determine the spring constant of the spring. The formula for calculating the spring constant is given as below;k = (4π²m) / T²

Wherek = spring constant

m = mass of the object

T = time period of oscillation

Therefore, first we need to find the time period of oscillation. The formula for time period is given as below;T = 1 / f

Where T = time period

f = frequency

Thus, substituting the given values, we get;

T = 1 / f = 1 / (f (same for radio waves))

Now, to find the spring constant, we substitute the known values of mass and time period into the formula of the spring constant:  k = (4π²m) / T²k = (4 x π² x 0.191 kg) / (4.35536 x 10¹⁴ s²)  k = 1.90 × 10⁻¹⁷ N/m

To know more about constant:

https://brainly.com/question/31730278

#SPJ11

The volume flow rate in m is 8.89 × 10⁻⁵ m³/s.

Volume flow rate = volume of water/time taken

The volume of water that flows through the hose is equal to the volume of water that fills the container.

Therefore, Volume of water = 4.0 L = 4.0 × 10⁻³ m³

Time taken = 45 s

Using the above formula,

Volume flow rate = volume of water/time taken

                             = 4.0 × 10⁻³ m³/45 s

                             = 0.0889 × 10⁻³ m³/s

                             = 8.89 × 10⁻⁵ m³/s

Therefore, the volume flow rate in m is 8.89 × 10⁻⁵ m³/s.

Learn more about the volume flow rate:

brainly.com/question/23127034

#SPJ11

The intensity level from the lawnmower, at a distance of 20 answer: m, is approximately 0.000012 dB.

When we move 20 m away from the lawnmower, we need to calculate the new intensity level at this position. Intensity level is measured in decibels (dB) and can be calculated using the formula:

IL = 10 * log10(I/I0),

where I is the intensity and I0 is the reference intensity (typically 10^(-12) W/m^2).

We can use the inverse square law for sound propagation, which states that the intensity of sound decreases with the square of the distance from the source. The new intensity (I2) can be calculated as follows:

I2 = I1 * (r1^2/r2^2),

where I1 is the initial intensity, r1 is the initial distance, and r2 is the new distance.

In this case, the initial intensity (I1) is 0.005 W/m^2 (given), the initial distance (r1) is 3 m (given), and the new distance (r2) is 20 m (given). Plugging these values into the formula, we get:

I2 = 0.005 * (3^2/20^2)

   = 0.0001125 W/m^2.

Convert the new intensity to dB:

Now that we have the new intensity (I2), we can calculate the intensity level (IL) in decibels using the formula mentioned earlier:

IL = 10 * log10(I2/I0).

Since the reference intensity (I0) is 10^(-12) W/m^2, we can substitute the values and calculate the intensity level:

IL = 10 * log10(0.0001125 / 10^(-12))

  ≈ 0.000012 dB.

Therefore, the intensity level from the lawnmower, at a distance of 20 m, is approximately 0.000012 dB. This value represents a significant decrease in intensity compared to the initial distance of 3 m. It indicates that the sound from the lawnmower becomes much quieter as you move farther away from it.

Learn more about Intensity

brainly.com/question/17583145

#SPJ11

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

a. Phasor diagram of the circuit is given below:b. The two circuit elements are connected are inductance (L) and resistance (R).

In a purely inductive circuit, voltage and current are out of phase with each other by 90°. In a purely resistive circuit, voltage and current are in phase with each other. Hence, by comparing the phase difference between voltage and current, we can determine that the circuit contains inductance (L) and resistance (R).

c. We know that;

Maximum voltage (V) = 175 VMaximum current (I) = 13.6

APhase angle (θ) = 37°

We can find out the Impedance (Z) of the circuit by using the below relation;

Impedance (Z) = V / IZ = 175 / 13.6Z = 12.868 Ω

Now, we can find out the values of resistance (R) and inductance (L) using the below relations;

Z = R + XL

Here, XL = 2πfL

Where f = 90 Hz

Therefore,

XL = 2π × 90 × LXL = 565.49 LΩ

Z = R + XL12.868 Ω = R + 565.49 LΩ

Maximum current (I) = 13.6 A,

so we can calculate the maximum value of R and L using the below relations;

V = IZ175 = 13.6 × R

Max R = 175 / 13.6

Max R = 12.87 Ω

We can calculate L by substituting the value of R

Max L = (12.868 − 12.87) / 565.49

Max L = 0.000035 H = 35 mH

Therefore, the two circuit elements are;

Resistance (R) = 12.87 Ω

Inductance (L) = 35 mH (or 0.000035 H)

learn more about Resistance on:

https://brainly.com/question/28135236

#SPJ11

a) When a bar magnet is broken into two pieces, the two pieces become two independent magnets, and not a north-pole magnet and a south-pole magnet. This is because each piece contains its own magnetic domain, which is a region where the atoms are aligned in the same direction. The alignment of atoms in a magnetic domain creates a magnetic field. In a magnet, all the magnetic domains are aligned in the same direction, creating a strong magnetic field.

When a magnet is broken into two pieces, each piece still has its own set of magnetic domains and thus becomes a magnet itself. The new north and south poles of the pieces will depend on the arrangement of the magnetic domains in each piece.

b) When a magnet is heated up, the heat energy causes the atoms in the magnet to vibrate more, which can disrupt the alignment of the magnetic domains. This causes the magnetization power to decrease. However, when the temperature cools back down, the atoms in the magnet stop vibrating as much, and the magnetic domains can re-align, causing the magnetism power to return. This effect is assuming that the temperature is lower than the Curie point, which is the temperature at which a material loses its magnetization permanently.

Learn more about magnetism here: https://brainly.com/question/14411049

#SPJ11

The force required to stop the train is 2.93 × 10⁶ N (to two significant figures).

Given that Superman must stop a 190-km/h train in 200 m to keep it from hitting a stalled car on the tracks. The train's mass is 3.7 × 10⁵ kg.

To calculate the force, we use the formula:

F = ma

Where F is the force required to stop the train, m is the mass of the train, and a is the acceleration of the train.

So, first, we need to calculate the acceleration of the train. To calculate acceleration, we use the formula:

v² = u² + 2as

Where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance traveled.

The initial velocity of the train is 190 km/h = 52.8 m/s (since 1 km/h = 1000 m/3600 s)

The final velocity of the train is 0 m/s (since Superman stops the train)

The distance traveled by the train is 200 m.

So, v² = u² + 2as ⇒ (0)² = (52.8)² + 2a(200) ⇒ a = -7.92 m/s² (the negative sign indicates that the train is decelerating)

Now, we can calculate the force:

F = ma = 3.7 × 10⁵ kg × 7.92 m/s² = 2.93 × 10⁶ N

Therefore, the force required to stop the train is 2.93 × 10⁶ N (to two significant figures).

Learn more about force visit:

brainly.com/question/30507236

#SPJ11

The actual frequency of the ambulance's siren is approximately 481.87 Hz.

To determine the actual frequency of the ambulance's siren, we need to consider the Doppler effect. The Doppler effect describes the change in frequency of a wave when the source of the wave and the observer are in relative motion.

In this case, you are driving towards the ambulance, so you are the observer. The ambulance's siren is the source of the sound waves. When the source and the observer are moving toward each other, the observed frequency is higher than the actual frequency.

We can use the Doppler effect formula for sound to calculate the actual frequency:

f' = (v + vo) / (v + vs) * f

Where:

f' is the observed frequency

f is the actual frequency

v is the speed of sound

vo is the velocity of the observer

vs is the velocity of the source

Given that you are driving at a velocity of 37 m/s towards the ambulance, the ambulance is traveling at a velocity of 44 m/s towards you, and the observed frequency is 426 Hz, we can substitute these values into the formula:

426 = (v + 37) / (v - 44) * f

To solve for f, we need the speed of sound (v). Assuming the speed of sound is approximately 343 m/s, which is the speed of sound in dry air at room temperature, we can solve the equation for f:

426 = (343 + 37) / (343 - 44) * f

Simplifying the equation, we get:

426 = 380 / 299 * f

f ≈ 481.87 Hz

To learn more about frequency

https://brainly.com/question/254161

#SPJ11

The magnification is given by: M = v2/v1 = (54 cm)/(60 cm) = 0.9

This means that the image is smaller than the object, by a factor of 0.9.

A. Diagram B. Using the lens formula:

1/f = 1/v - 1/u

For the first lens, with u = -15 cm, f = +12 cm, and v1 is unknown.

Thus,1/12 = 1/v1 + 1/15v1 = 60 cm

For the second lens, with u = 360 cm - 60 cm = +300 cm, f = +18 cm, and v2 is unknown.

Thus,1/18 = 1/v2 - 1/300v2 = 54 cm

Thus, the image is formed at a distance of 54 cm to the right of the second lens, measured from its center, which makes it 54 - 18 = 36 cm to the right of the second lens measured from its right-hand side.

The image is real, as it appears on the opposite side of the lens from the object. It is inverted, since the object is located between the two lenses.

To know more about magnification  visit:-

https://brainly.com/question/2648016

#SPJ11

The heat loss by metal and heat gained by water with the given information the heat gained by the metal is -16720 J.

We can use the following calculation to determine the heat loss by the metal and the heat gained by the water:

Q = m * c * ΔT

Here, it is given:

m1 = 50 g

T1 = 100 °C

c1 = 0.45 J/g°C

m2 = 50 g

T2 = 20 °C

c2 = 4.18 J/g°C

Now, the heat loss:

ΔT1 = T1 - T2

ΔT1 = 100 °C - 20 °C = 80 °C

Q1 = m1 * c1 * ΔT1

Q1 = 50 g * 0.45 J/g°C * 80 °C

Now, heat gain,

ΔT2 = T2 - T1

ΔT2 = 20 °C - 100 °C = -80 °C

Q2 = m2 * c2 * ΔT2

Q2 = 50 g * 4.18 J/g°C * (-80 °C)

Q1 = 50 g * 0.45 J/g°C * 80 °C

Q1 = 1800 J

Q2 = 50 g * 4.18 J/g°C * (-80 °C)

Q2 = -16720 J

Thus, as Q2 has a negative value, the water is losing heat.

For more details regarding heat gain, visit:

https://brainly.com/question/29698863

#SPJ4

This is a dictionary of physical terms and formulas related to electricity, including definitions and problem-solving examples on electric current, voltage, and resistance. The resistance of the 2nd resistor is 54 [tex]\Omega[/tex], the total resistance of the circuit is 25 [tex]\Omega[/tex] and the current strength is 1.5 A, and the work is 198000 J

For more questions on electric current

https://brainly.com/question/1100341

#SPJ8

The resistance of the gold wire is 0.235 Ω.

Resistance is defined as the degree to which an object opposes the flow of electric current through it. It is measured in ohms (Ω). Resistance is determined by the ratio of voltage to current. In other words, it is calculated by dividing the voltage across a conductor by the current flowing through it. Ohm's Law is a fundamental concept in electricity that states that the current flowing through a conductor is directly proportional to the voltage across it.

A gold wire with a length of 5.69 cm and a diameter of 0.870 mm is carrying a current of 1.35 A. We need to calculate the resistance of this wire. To do this, we can use the formula for the resistance of a wire:

R = ρ * L / A

In the given context, R represents the resistance of the wire, ρ denotes the resistivity of the material (in this case, gold), L represents the length of the wire, and A denotes the cross-sectional area of the wire. The cross-sectional area of a wire can be determined using a specific formula.

A = π * r²

where r is the radius of the wire, which is half of the diameter given. We can substitute the values given into these formulas:

r = 0.870 / 2 = 0.435 mm = 4.35 × 10⁻⁴ m A = π * (4.35 × 10⁻⁴)² = 5.92 × 10⁻⁷ m² ρ for gold is 2.44 × 10⁻⁸ Ωm L = 5.69 cm = 5.69 × 10⁻² m

Now we can substitute these values into the formula for resistance:R = (2.44 × 10⁻⁸ Ωm) * (5.69 × 10⁻² m) / (5.92 × 10⁻⁷ m²) = 0.235 Ω

Therefore, the resistance of the gold wire is 0.235 Ω.

Learn more about resistance at: https://brainly.com/question/17563681

#SPJ11

The distance between the plates decreases, the force exerted on the positive plate of the capacitor increases and vice versa. Given, Speed of parallel plate capacitor = v = 34 m/s

Magnetic field = B = 4.3 TArea of each plate = A = 9.3 × 10⁻⁴ m²

Electric field within the capacitor = E = 220 N/C

Let the distance between the plates of the capacitor be d.

Now, the magnitude of the magnetic force exerted on the positive plate of the capacitor is given by

F = qVB sinθ

where q = charge on a plate = C/d

V = potential difference between the plates = Edsinθ = 1 (since velocity is perpendicular to the magnetic field)

Thus,

F = qVB

Putting the values, we get

F = qVB

= (C/d) × (E/d) × B

= (EA)/d²= (220 × 9.3 × 10⁻⁴)/d²

= 0.2046/d²

Since d is not given, we cannot calculate the exact value of the magnetic force. However, we can say that the force is inversely proportional to the square of the distance between the plates.  

To know more about capacitor  visit:-

https://brainly.com/question/31627158

#SPJ11