This table shows four species of plants, with descriptions. Which species are most likely vascular? the bracken and the bog groove moss the thallose liverwort and the bog groove moss the bracken and the lemon tree the thalose liverwort and the lemon tree Mark this and return

Answer:

0.45 g

Explanation:

Step 1: Given data

Step 2: Calculate the moles of methionine (n)

We will use the following expression.

n = C × V

n = 150 × 10⁻³ mol/L × 20 × 10⁻³ L

n = 3.0 × 10⁻³ mol

Step 3: Calculate the mass of methionine (m)

We will use the following expression.

m = n × M

m = 3.0 × 10⁻³ mol × 149.21 g/mol

m = 0.45 g

Answer:

The new material Emily invented allows scratches to be repaired quickly, so it would be useful on cars and other surfaces that experience a lot of wear.

Explanation:

I got this right on Plato\Edmentum

Answer:

The new material Emily invented allows scratches to be repaired quickly, so it would be useful on cars and other surfaces that experience a lot of wear.

Explanation:

Answer: c. Water

Explanation:

Heat capacity can be defined as the physical property of the matter. It is the amount of heat which is required to produce a unit change in the temperature of the material.

Water requires more amount of energy per gram of the liquid to change its temperature as compare to any other liquid like ethanol and oil. Ethanol is a volatile liquid so it will require less heat to boil but heat capacity of oil will be more than the oil. The heat capacity of water will be the highest, and it will require more heat.

Answer:

1. molarity is = 0.1174

2. molarity is = 9.3

3. molarity is =0.009392

Explanation:

Q#1.

mass of sucrose is 14.07g

molar mass of sucrose is 342 3g/mol

so, 14.07x1/342.3 = 0.0411

now the volume is of water is 0.35

so, 0.0411/0.35 = 0.1174

Q#2.

concentration is 4.5

so, 4.5x1/1000= 0.0045

then, 0.0411/0.0045 = 9.13

Q#3.

M1M1=M2M2

molarity of the same sucrose is 0.1174

so, diluted in 40mL

and the volumetric flask is 500mL

so, 0.1174x40/500= 0.009392

Answer: pH = 10

Explanation: First solve for pOH using the equation pOH=-log[OH-] = 4

Then plug the pOH in the equation, pH + pOH =14

then solve for pH. pH =14 - 4 = 10

Answer:

pH= 10

Explanation:

The pH really depends on what your solution is.

For example, if we are assuming that the concentration of 1.0M is of a strong monoprotic acid e.g. HCl, it would be safe to assume that almost all of the 1.0M acid has dissociated into its H+ ion, and its conjugate base. Thus, the pH can be determined by taking the negative log(to base 10), of the concentration.

Inversely, if the solution is of a strong base, the pOH value would be found, assuming the steps above. This pOH value can be used to infer a pH from the formula - pH + pOH = 14 then 14 - 4 = 10

Finally, come the weak acids/bases, which follow the rules above, except as they only partially dissociate, one needs its equilibrium constant to determine its extent of ionisation, to substitute into the negative log. This also is the case for the second, and higher order dissociation of polyprotic acids e.g. H2SO4.the answer is 10

Hope it helps

Answer:

I ordered the tiles from left to right and top to bottom as the numbers kept increasing. The tiles were also organized based on the color and shape that they were. The tiles with the same color and shape were arranged in the same column.

Explanation:

In the modern periodic table, the elements are listed in order of increasing atomic number and elements having similar chemical properties naturally line up in the same column (group).

Answer:

A

Explanation:

Answer:

Pb²⁺ (aq) + 2I⁻ (aq) → PbI₂ (s)

General Formulas and Concepts:

Explanation:

Step 1: RxN

Pb(NO₃)₂ (aq) + KI (aq) → PbI₂ (s) + KNO₃ (aq)

Step 2: Balance RxN

Pb(NO₃)₂ (aq) + 2KI (aq) → PbI₂ (s) + 2KNO₃ (aq)

Step 3: Ionic Equations

Total Ionic Equation:

Pb²⁺ (aq) + 2NO₃⁻ (aq) + 2K⁺ (aq) + 2I⁻ (aq) → PbI₂ (s) + 2K⁺ (aq) + 2NO₃⁻ (aq)

Cancel out spectator ions.

Net Ionic Equation:

Pb²⁺ (aq) + 2I⁻ (aq) → PbI₂ (s)

Answer:

[tex]\% Fe=11.4\%[/tex]

Explanation:

Hello!

In this case, for the described chemical reaction, we find it is:

[tex]8H^+(aq)+5Fe^{2+}(aq)+MnO_4^-(aq)\rightarrow 5Fe^{3+}(aq)+Mn^{2+}(aq)+4H_2O(l)[/tex]

Because it says that the iron is dissolved in a strong acid which provides addition hydrogen ions to the reaction media. Thus, for the questions attached on the figure we find:

- This a REDOX reaction because we see iron is being oxidized from 2+ to 3+ and manganese reduced from +7 to +2.

- Since it is a redox reaction and the oxidized species is that undergoing an oxidation number increase, we evidence iron goes from +2 to +3, which means iron is the oxidized species.

- In this case, for the used 59.2 mL (0.0592 L) of the 0.2000 M solution of potassium permanganate, we can compute the consumed grams of iron via stoichiometry including the 5:1 mole ratio between them in the chemical reaction:

[tex]m_{Fe^{2+}}=0.0592L*0.2000\frac{molMnO_4^-}{L}*\frac{5molFe^{2+}}{1molMnO_4^-} *\frac{55.85gFe^{2+}}{1molFe^{2+}} \\\\m_{Fe^{2+}}=3.31gFe^{2+}[/tex]

It means that the percent of iron in that sample is:

[tex]\% Fe=\frac{3.31g}{29.00g} *100\%\\\\\% Fe=11.4\%[/tex]

Best regards.

The final temperature = 36 °C

The balanced combustion reaction for C₆H₆

2C₆H₆(l)+15O₂(g)⇒ 12CO₂(g)+6H₂O(l)  +6542 kJ

MW C₆H₆ : 78.11 g/mol

mol C₆H₆ :

[tex]\tt \dfrac{8.5}{78.11}=0.109[/tex]

Heat released for 2 mol C₆H₆ =6542 kJ, so for 1 mol

[tex]\tt \dfrac{0.109}{2}\times 6542=356.539~kJ/mol[/tex]

Heat transferred to water :

Q=m.c.ΔT

[tex]\tt 356.539=5.691~kg\times 4.18~kj/kg^oC\times (t_2-21)\\\\t_2-21=15\rightarrow t_2=36^oC[/tex]

.

.

[tex]

\bold{\huge{\fbox{\color{red}{answer}}}}[/tex]

b competition .

hope it helps u

Answer:

Mass is conserverd

Explanation:

Any chemical reaction must follow the law of conservation of mass. Meaning that mass cannot be created nor destroyed. Since all chemical reactions must follow this law, no matter what reaction happens, mass is conserved.

Answer:

two of the above

Explanation:

cK-12 Bond Polarity

The most plausible reason why your new patient, Elisa, is feeling tired all the time is:

According to the complete question, we can see that the cells which are in Elise's body are receiving oxygen and proteins, but they are not getting enough glucose, which can be gotten from breaking down starch.

As a result of this, we can see that the best diagnoses of why Elise is always getting tired is that she has diabetes because of the inability of the body to break down starch to provide enough glucose to the body.

Read more here:

https://brainly.com/question/18470980

Answer:

167 mL.

Explanation:

We'll begin by calculating the number of moles in 45 g of aluminum (Al). This can be obtained as follow:

Mass of Al = 45 g

Molar mass of Al = 27 g/mol

Mole of Al =?

Mole = mass /Molar mass

Mole of Al = 45/27

Mole of Al = 1.67 moles

Next, the balanced equation for the reaction. This is given below:

2Al + 3H2SO4 → Al2(SO4)3 + 3H2

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Next, we shall determine the number of mole of H2SO4 needed to react with 45 g (i.e 1.67 moles) of Al. This can be obtained as:

From the balanced equation above,

2 moles of Al reacted with 3 moles of H2SO4.

Therefore, 1.67 moles of Al will react with = (1.67 × 3)/2 = 2.505 moles of H2SO4.

Thus 2.505 moles of H2SO4 is needed for the reaction.

Next, we shall determine the volume of H2SO4 needed for the reaction. This can be obtained as follow:

Molarity of H2SO4 = 15.0 M

Mole of H2SO4 = 2.505 moles

Volume =?

Molarity = mole /Volume

15 = 2.505 / volume

Cross multiply

15 × volume = 2.505

Divide both side by 15

Volume = 2.505/15

Volume = 0.167 L

Finally, we shall convert 0.167 L to mL. This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.167 L = 0.167 L × 1000 mL / 1 L

0.167 L = 167 mL

Thus, 0.167 L is equivalent to 167 mL.

Therefore, 167 mL H2SO4 is needed for the reaction.

Answer:

please brainlist answer

Explanation:

The addition of K 3 Fe(CN) 6 to a solution causes the formation of a deep blue precipitate which indicates that iron(II) ions are present.

The conclusive test for iron(II) ions is the test by the use of potassium hexacyanoferrate III solution.

In qualitative analysis certain reagents are used to test for the presence of certain cations or anions. Those reagents react in a certain way with those reagents. Usually, a positive test may involve a color change, formation of a precipitate or evolution of a gas.

In the case of iron(II) ions, potassium hexacyanoferrate III solution is used in the conclusive qualitative test for the ion. A positive test involves the appearance of a deep blue precipitate.

Learn more: https://brainly.com/question/6955504

Answer:

Light i think

Explanation:

light is a source of energy also

Answer:

a. Approximately [tex]1.3\; \rm mL[/tex].

b. Approximately [tex]7.2\; \rm mL[/tex].

Explanation:

The unit of concentration "[tex]\rm M[/tex]" is equivalent to "[tex]\rm mol \cdot L^{-1}[/tex]", which means "moles per liter."

However, the volume of both solutions were given in mililiters [tex]\rm mL[/tex]. Convert these volumes to liters:

[tex]\displaystyle 45\; \rm mL = 45\; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.045\; \rm L[/tex].

[tex]\displaystyle 330\; \rm mL = 330\; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.330\; \rm L[/tex].

In a solution of volume [tex]V[/tex] where the concentration of a solute is [tex]c[/tex], there would be [tex]c \cdot V[/tex] (moles of) formula units of this solute.

Calculate the number of moles of [tex]\rm NaCl[/tex] formula units in each of the two solutions:

Solution in a.:

[tex]n = c \cdot V = 0.045\; \rm L \times 0.10\; \rm mol \cdot L^{-1} = 0.0045\; \rm mol[/tex].

Solution in b.:

[tex]n = c \cdot V = 0.330\; \rm L \times 0.074\; \rm mol \cdot L^{-1} = 0.02442\; \rm mol[/tex].

What volume of that [tex]3.4\; \rm M[/tex] (same as [tex]3.4 \; \rm mol \cdot L^{-1}[/tex]) [tex]\rm NaCl[/tex] solution would contain that many

For the solution in a.:

[tex]\displaystyle V = \frac{n}{c} = \frac{0.0045\; \rm mol}{3.4\; \rm mol \cdot L^{-1}} \approx 0.0013\; \rm L[/tex].

Convert the unit of that volume to milliliters:

[tex]\displaystyle 0.0013\; \rm L = 0.0013\; \rm L \times \frac{1000\; \rm mL}{1\; \rm L} = 1.3\; \rm mL[/tex].

Similarly, for the solution in b.:

[tex]\displaystyle V = \frac{n}{c} = \frac{0.02442\; \rm mol}{3.4\; \rm mol \cdot L^{-1}} \approx 0.0072\; \rm L[/tex].

Convert the unit of that volume to milliliters:

[tex]\displaystyle 0.0072\; \rm L = 0.0072\; \rm L \times \frac{1000\; \rm mL}{1\; \rm L} = 7.2\; \rm mL[/tex].

Answer:

############################

Explanation:

Answer:

1.70 L

Explanation:

From the question given above, the following data were obtained:

Pressure (P) = constant = 1.2 atm

Initial volume (V1) = 1.25 L

Initial temperature (T1) = 293 K

Final temperature (T2) = 398 K

Final volume (V2) =?

Since the pressure is constant, the gas is obeying Charles' law. Thus, we can obtain the new volume (V2) of the gas by applying the Charles' equation as shown below:

V1/T1 = V2/T2

1.25 / 293 = V2 /398

Cross multiply

293 × V2 = 1.25 × 398

293 × V2 = 497.5

Divide both side by 293

V2 = 497.5 / 293

V2 = 1.70 L

Therefore, the new volume of the gas is 1.70 L.

Answer:

Warm Water

Explanation:

In warm temperatures, cold-blooded animals are more active and can travel more quickly. This occurs because heat activated reactions provide energy to move muscles. In the absence of heat the animal becomes slow and sluggish. So they are usually inactive and rest when it is cold. As they do not need to feed much, they spend less time looking for food, so this life strategy works for them.

Brainliest?

Answer warm water Explanation:i have the same question

Answer:

its hydroxy and alkoxy

Explanation:

ester is mainly formed by substitution reaction of carboxylic acid and alcohol

The esters are generally produced as a result of the reaction called esterification. They are generally derived from carboxylic acids. The functional group present in ester is OR. The correct option is E.

The chemical compounds which are derived from an acid either organic or inorganic in which at least -OH ( hydroxyl group ) is replaced by an -O- alkyl group ( alkoxy ) group are called esters. Generally an ester can be represented as R - C = O - OR.

The chemical compounds that are formed by the reaction of an acid and alcohol by losing water molecule can be defined as the esters.

To know more about esters, visit;

https://brainly.com/question/30404138

#SPJ7

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question we have

[tex]density = \frac{690}{750} = \frac{69}{75} = \frac{23}{25} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

Trioxocarbonate (iv) are salts derived from trioxocarbonate (iv) acid when it reacts with metals and metallic oxides. All trioxocarbonate (iv) salts of Sodium (Na), Potassium (K) and Ammonium(NH4+) are soluble while all others are insoluble.

Answer:

Topographical

Explanation:

When it comes to questions such as this one, the thing that could help you the most is a dictionary. A dictionary is an alphabetically arranged listing of words that contains various information about those words, such as their definitions, examples, origin, pronunciation, etc.

The term the given definition refers to is topographical. Topography is the study of the forms and features of land surfaces. The topography of an area refers to its physical properties and terrain or their description (e.g. how they're shown on a map).

Answer:

C

Explanation:

Answer:

I think is A

Explanation:

Hope it helps