This is the question
please help asap

Answer:

The Magnitude of the angle of reflection equals that of Incidence from the Law of reflection

So its 50°.

Explanation:

Answer:

I believe the answer is D: Conductor.

Answer:

(This will depend on the type of fuel, I will assume that the fuel is petrol)

First, let's find the expected energy consumption in the US for the next 10 years.

We know that in one year, a person consumes 3.5*10^11 joules.

There are 310,000,00 people on the US

Then the total consumption in one year is:

310,000,000*3.5*10^11 joules = 1.085*10^20 J

In 10 years the consumption is 10 times the consumption of a single year, then the expected energy consumption in the US for the next 10 years is:

10*1.085*10^20 J = 1.085*10^21 J

Now let's find the mass of fuel required.

We know that a liter of petrol has 31,536,000 joules of energy,

And a liter of petrol weights 0.75 kg

To find the number of liters of petrol that we need, we need to find the quotient between the expected energy consumption in the next 10 years and the energy of a single liter of petrol, this is:

N = (1.085*10^20 J)/(31,536,000 j) = 3.44*10^13

We will need  3.44*10^13 liters of petrol.

And the total mass of petrol will be:

M = 3.44*10^13*0.75 kg = 2.58*10^13 kg of fuel.

Answer:

Explanation:

Here, we are asked to calculate the average speed in km/minute.

As we know that,

Here,

→ Total distance = 10 km + 10 km

→ Total distance = 20 km

→ Total time = 8 minutes + 2 minutes

→ Total time = 10 minutes

Substitute the values in the formula of average speed,

→ Average speed = Total distance ÷ Total time taken

→ Average speed = 20km ÷ 10 minutes

Answer:

Hey!

_________________

Voltage (V) = 0.8V

Current (I) = 200 mA = 200/10^3 = 2/10

Resistance = ?

Resistance = Voltage / Current

Voltage = Current × Resistance

0.8 = 2/10 × Resistance

0.8×10/2 = Resistance

8/2 = Resistance

Resistance = 4 ohm

_________________

Hope it helps...!!!

Explanation:

Answer:

342,690

Explanation:

I think, given 342,690 snowmen down a giant hill, that sled could destroy every single snowman :)

Answer:

400N

Explanation:

F= ma

F= 100 x 4

F= 400N

Answer:

sorry

Explanation:

Answer:

Oxygen or more precisely, the O-15 isotope.

Answer:

Explanation:

11.) d

12.) f

13.) c

15.) i

pls give me brainliest

Answer:

D) 1 & 2

Explanation:

Ice melting can be refrozen and although the pencil breaks, it doesn't change the chemical formula of the pencil

Answer:

The collision is inelastic

Explanation:

There are two kinds of collision; elastic collision and inelastic collision. In an elastic collision, both momentum and kinetic energy are conserved.

However, in an inelastic collision, kinetic energy is not conserved. So, when the bumper of two cars collide, the cars come to a stop because the collision is inelastic.

Answer:

C a fast-moving cold front moved through the area.

Explanation:

This is because, since there is a there is a thunderstorm and high winds in the area, this can only be caused by a fast moving front. Also there is a temperature drop, this can only be caused by the fast moving cold front since a cold front has a low temperature.

Thus, for the area to experience thunderstorms with high winds and a drop in temperature, a fast-moving cold front moved through the area.

Answer:

You either need to lower the volume so the sounds intensity is lessened. Or you can pad the walls to absorb the sound rather than defect.

Explanation:

Sound intensity allows it to be heard further, but in an enclosed room it will start returning. Sound will deflect off of hard objects do to its interactions with solids. A softer and foamy material can dampen it.

Answer:

I = 1.36 x 10⁻⁴ W/m²

Explanation:

The intensity of the sound produced by the Elephant can be calculated by using the following formula:

[tex]I = \frac{P}{A} \\\\[/tex]

where,

I = Intensity of sound = ?

P = power of sound = 0.45 W

A = area = πr² = π(32.5 m)² = 3318.3 m²

Therefore,

[tex]I = \frac{0.45\ W}{3318.3\ m^2} \\\\[/tex]

I = 1.36 x 10⁻⁴ W/m²

Answer:

how tightly strung the wire is

-- Make the string tighter or looser.

-- Keep the same length, but make the string thicker or thinner.

-- Touch the string at a point exactly 1/2, 1/3, 1/4, or 1/5 of its length from one end.

Answer:

i would say the third one

Explanation:

may i be brainliest?

Answer:

[tex]\rho=3\times 10^{-8}\ \Omega-m[/tex]

Explanation:

Given that,

Voltage, V = 120 V

The length of the wire, l = 20 m

The current density of the wire, [tex]\dfrac{I}{A}=2\times 10^8\ A/m^2[/tex]

We need to find the resistivity of this wire. We know that,

[tex]R=\rho \dfrac{l}{A}[/tex]

Where

[tex]\rho[/tex] is the resistivity of wire

Also, [tex]R=\dfrac{V}{I}[/tex]

So,

[tex]\dfrac{V}{I}=\rho \dfrac{l}{A}\\\\\rho=\dfrac{V}{l\dfrac{I}{A}}[/tex]

Put all the values,

[tex]\rho=\dfrac{120}{20\times 2\times 10^8}\\\\=3\times 10^{-8}\ \Omega-m[/tex]

So, the resistivity of this wire is equal to [tex]3\times 10^{-8}\ \Omega-m[/tex].

Answer: A.) concave lens

Explanation: i hope this helps shawtay :)

In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look." Option C is correct.

A lens is an optical component that is used to refract (bend) and focus light. It is typically made of a transparent material, such as glass or plastic, and has a specific shape that allows it to alter the path of light as it passes through.

Here,
In general, a concave lens (also known as a diverging lens) is used to correct nearsightedness, as stated in "Take a Closer Look."

A concave lens is thinnest at the center and thicker at the edges, which causes light rays passing through the lens to diverge or spread out. By placing a concave lens in front of a nearsighted eye, the lens causes incoming light rays to diverge more before they reach the eye's lens, which then focuses them properly on the retina, resulting in clearer vision.

Learn more about the lens here:
https://brainly.com/question/2919483
#SPJ6

Answer:

trueeeee

Explanation:

Answer:

E: None of the above

Explanation:

Since the force on the wire F = ∫idL × B where i = current in wire = 2.0 mA = 2.0 × 10⁻³ A, dL = vector length of wire = dyj and we integrate from y₁ = 0 m and y₂ = 0.25 m, and B = magnetic field = (0.3y)i + (0.4y)j

So, F = ∫idL × B

and we integrate from y₁ = 0 m and y₂ = 0.25 m

F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + (0.4y)j]

F = 2.0 × 10⁻³ A∫₀⁰°²⁵[dyj m × (0.3y)i + dyj m × (0.4y)j]

F = 2.0 × 10⁻³ A∫₀⁰°²⁵[(0.3y) × dy(j × i) + 0.25 × (0.4y)(j × j)]

F = 2.0 × 10⁻³ A∫₀⁰°²°⁵[(0.3ydy(-k) + 0.1y)(0)]

F = 2.0 × 10⁻³ A∫₀⁰°²⁵(-0.3ydy)k

F = 2.0 × 10⁻³ A[-0.3y²/2]₀⁰°²⁵k

F = -2.0 × 10⁻³ A[0.3(0.25)²/2 - 0.3(0)²/2]k

F = -2.0 × 10⁻³ A[0.3(0.0625)/2 - 0]k

F = -2.0 × 10⁻³ A[0.3(0.0625)/2]k

F = -1 × 10⁻³[0.01875]k N

F = -[0.01875 × 10⁻³]k N

F = -[1.875 × 10⁻⁵]k N

Since the answer is not contained in the options, the answer is E.