These diagrams represent two types of tectonic plate boundaries

These Diagrams Represent Two Types Of Tectonic Plate Boundaries

Answers

Answer 1

Convergent boundaries are caused by the collision of two plates and can originate volcanoes. Transforming boundaries produce fractures by displacement. The correct option is D. Type A boundaries have fewer volcanoes.

----------------------------------------

The crust -the outermost layer of the earth- is divided into many plates that move over the mantle.

These plates are limited by three types of ridges or borders that differ in the movement they produce.

Boundaries types:

I. Divergent:

This boundary occurs when two plates separate and molten material rises from the mantle creating a new crust.

The hot material creates a new seabed between the separating plates, expanding the sea bottom.

II. Convergent.

Collision area between two plates.

Two oceanic plates might collide, or one oceanic plate with a continental one.

In this last case, the oceanic crust sinks under the continental plate, and magma rises to the surface by crevices.

The thicker and older plate subduces under the other plate.

Collisions create volcanic arches and continental arches.

III. Transforming.

The plates slide laterally with each other, and they are usually called faults.

It is associated, in general, with the oceanic ridge, although it might also occur in the continental plate.

No rocky material is either destroyed or formed.

When the plates move and produce a displacement of one transforming limits from side to side, earthquakes occur.

The movement breaks the crust and originates pronounced fractures.

In the attached images, we can see

image A representing transforming boundaries, image B representing Convergent boundaries.

Image B is the one that can originate volcanoes because transforming boundaries only produce fractures.

So the correct option would be D.

--------------------------------

Learn more about convergent, divergent and transforming boundaries at

https://brainly.com/question/2437823?referrer=searchResults

https://brainly.com/question/2507413?referrer=searchResults

https://brainly.com/question/5082756?referrer=searchResults

https://brainly.com/question/16962517?referrer=searchResults

https://brainly.com/question/16660809?referrer=searchResults

https://brainly.com/question/11162339?referrer=searchResults

https://brainly.com/question/13311455?referrer=searchResults

Answer 2

Answer:

d

Explanation:


Related Questions

A medieval instrument used to determine the position of the sun:

Answers

Answer: astrolabe

Explanation:

1 point
A hairdryer uses 10 A of current when plugged into a 120 V outlet. How
much power does it use?

Answers

Answer:

1200 watt

Explanation:

P= I*V=10*120=1200watt

Convert: 12 km/hr =
m/s

Answers

[tex]12~ \text{km} ~ \text{h}^{-1} = \dfrac{12 \times 1000}{3600} ~~ \text{m s}^{-1} = 3.33 ~~ \text{m s}^{-1}[/tex]

Answer:

3 1/3 or 3.3333....

Explanation:

You multiply the kilometres by 1,000 because there are 1,000 metres in a kilometre. Then you divide by 60 because there are 60 minutes per hour, and then again by 60 because 60 seconds per minute.

12,000 / 60 = 200

200 / 60 = 3.333

Explain why the formation of sand is a physical change.

Answers

In chemical changes new substances are formed and the process is often difficult to reverse. During chemical changes particles do change with atoms or ions regrouping.Bonds between atoms break and new ones
form and energy is either given out or
taken in. Some chemical changes are
initiated by mixing

Answer:

The formation of sand is a physical change because some of the physical properties of the rocks change, but their identities do not. The particles of rock are rearranged as their sizes and shapes change, but their identities and total mass remain the same.

Approximately how many kilograms (kg) of carnivore (secondary consumer) biomass can be supported by an area of a field containing 1,000 kg of plant material (assuming 10% efficiency in energy transfer)

Answers

Only 10 Kg of secondary consumers can be supported by the ecosystem.

There exists such a thing as the 10% rule in the transfer of energy in biomass from one trophic level to another. This rule ultimately controls the mass of biomass that is available at the next higher trophic level.

This rule state that only 10% of the energy in biomass is transferred to the next trophic level. By this rule, only 10% of the energy in the plant material is transferred to the carnivore population. Therefore, only 10 Kg of secondary consumers can be supported by the ecosystem.

Learn more about trophic level: https://brainly.com/question/13267087

What is the centripetal acceleration?

Answers

Answer:

centripetal acceleration is when an object accelerates going in a circular motion.


A woman of mass 49 kg jumps off the bow
of a 78 kg canoe that is intially at rest.
If her velocity is 4.5 m/s to the right, what
is the velocity of the canoe after she jumps?
Answer in units of m/s i.
x x

Answers

The woman-canoe system has zero initial momentum. When the woman jumps from the canoe, the total momenta of the woman and canoe is conserved, so that

0 = (49 kg) (4.5 m/s) + (78 kg) v

where v is the velocity of the canoe. Solving for v, we find

(78 kg) v = - (49 kg) (4.5 m/s)

v = - 49/78 (4.5 m/s)

v ≈ -2.8 m/s

which is to say, the boat is given a velocity of 2.8 m/s to the left.


A 40W lamp wastes 34 J of energy every second by heating its surroundings.
What is the efficiency of the lamp?
С
18%
D
85%
A
0.15%
15%
B

Answers

Answer:

[tex]15\%[/tex].

Explanation:

The efficiency of a machine is the percentage of energy input that was turned into useful energy.

The power rating of this lamp is [tex]40\; \rm W[/tex] (same as [tex]40\; \rm J \cdot s^{-1}[/tex],) meaning that [tex]40\; \rm J[/tex] of energy is supplied to this lamp every second.

The question states that [tex]34\; \rm J[/tex] out of that [tex]40\; \rm J[/tex] of energy input would be turned into heat, which is not useful energy output in this scenario. Assuming that all other forms of energy loss is negligible. The rest of the [tex](40\; \rm J - 34\; \rm J) = 6\; \rm J[/tex] of energy supplied to this lamp would be turned into useful energy output.

Thus, every second, this lamp would receive [tex]40\; \rm J[/tex] of energy input and would outputs [tex]6\; \rm J[/tex] of useful work. The efficiency of this lamp would be:

[tex]\begin{aligned}& \text{Efficiency} \\ =\; & \frac{\text{Useful energy out}}{\text{Total energy in}} \times 100\% \\ =\; & \frac{6\; \rm J}{40\; \rm J} \times 100\%\\ =\; &15\% \end{aligned}[/tex].

help will give brainlist
Which unit is used for current?
power
resistance
voltage
amperes

Answers

The answer is D amperes

what 3 things make up a nucleotid

Answers

Answer:

A nucleotide consists of a sugar molecule (either ribose in RNA or deoxyribose in DNA) attached to a phosphate group and a nitrogen-containing base. The bases used in DNA are adenine (A), cytosine (C), guanine (G), and thymine (T).

Share your thoughts about this statement by John Wesley
"Electricty is the soul of universe"

Answers

Answer:

I think this statement is true at least in modern day times. The world runs on nothing but technology. People use more technology instead of old school textbooks and papers. Imagine living in a world without technology… that means no cars, no trains, no devices, no machines like your stove or printer, no lights and lots more. John Wesley is 100 percent correct with this statement. Electricity is indeed the powerhouse of the universe.

pls help quickly

Which of these materials best scatters the light that strikes it?
a pure water
b shiny mirror
c frosted glass
d eyeglass lens

Answers

Answer: frosted glass

Explanation:

Answer:

C

Explanation:

Frosted Glass

how many kilojoules is this?

Answers

Answer:

How to convert joules to kilojoules

One joule is equal to thousandth of a kilojoule:

1J = 0.001kJ

The energy in kilojoules E(kJ) is equal to the energy in joules E(J) divided by 1000:

E(kJ) = E(J) / 1000

Example

Convert 500 joules to kilojoules.

The energy E in kilojoules (kJ) is equal to 500 joules (J) divided by 1000:

E(kJ) = 500J / 1000 = 0.5kJ

Joules to kilojoules conversion table

Energy (J) Energy (kJ)

1 J 0.001 kJ

2 J 0.002 kJ

3 J 0.003 kJ

4 J 0.004 kJ

5 J 0.005 kJ

6 J 0.006 kJ

7 J 0.007 kJ

8 J 0.008 kJ

9 J 0.009 kJ

10 J 0.01 kJ

20 J 0.02 kJ

30 J 0.03 kJ

40 J 0.04 kJ

50 J 0.05 kJ

60 J 0.06 kJ

70 J 0.07 kJ

80 J 0.08 kJ

90 J 0.09 kJ

100 J 0.1 kJ

200 J 0.2 kJ

300 J 0.3 kJ

400 J 0.4 kJ

500 J 0.5 kJ

600 J 0.6 kJ

700 J 0.7 kJ

800 J 0.8 kJ

900 J 0.9 kJ

1000 J 1 kJ

2000 J 2 kJ

3000 J 3 kJ

4000 J 4 kJ

5000 J 5 kJ

6000 J 6 kJ

7000 J 7 kJ

8000 J 8 kJ

9000 J 9 kJ

10000 J 10 kJ

100000 J 100 kJ

hope it help u

itz by Riddhi

an EM wave has a wave length of 956 m, What type of electromagnetic waves is this wave

Answers

The electromagnetic spectrum allows finding the result for the question of type of electromagnetic wave has a wavelength of 956 nm

The wave is in the near infrared range.

The electromagnetic wave is an oscillation of electric fields and magnets field that sustain each other, this wave time has the characteristics that it can travel without a material medium, for which they are of extreme importance.

Consequently the spectrum of electromagnetic waves to each part has been given a different name second to its use, for example

Range                        Name  

Ultraviolet light          200 to 400 nm

Visible light               400 to 700 nm

Infrared light (heat  ) 700 nm to 1 mm

The latter is subdivided into:

 Near infrared          700 nm to 1000 nm (1 μm)

 Medium infrared        1 μm  to 30 μm

 Far infrared             50 μm to 1000 μm

It indicates that the wavelength of the measured radiation is 956 nm, therefore it is in the near infrared range.

Learn more about the electromagnetism spectrum here:  brainly.com/question/23727978

1. How much energy is needed just to melt 0.56kg of ice at 0◦ C?
2. How much energy is needed just to boil 5kg of water at 100◦ C?
3. What is the specific heat of metal if its mass is 27 g and it requires 420 J of heat energy to
increase its temperature from 25°C to 50°C?


please help me out I dont have much time

Answers

Answer:

This will require 266.9 of heat energy.

Explanation:

To calculate the energy required to raise the temperature of any given substance, here's what you require:The mass of the material, m The temperature change that occurs,  ΔT The specific heat capacity of the material,

c

(which you can look up). This is the amount of heat required to raise 1 gram of that substance by 1°C.

Here is a source of values of

c for different substances:

Once you have all that, this is the equation:

Q=m×c×ΔT(Q is usually used to symbolize that heat required in a case like this.)For water, the value of c is 4.186g°C So, Q=750×4.186×85=266=858=266.858

How many neutrons are in K-37?

Answers

Answer:

18 neutrons

Explanation:

Potassium is nuimber 19 on periodic table, so when the mass equals 37, you simply subtract 37-19 to get 18

potassium usually has a mass of 39, so when we have potassium 37, it is two less neutrons than normal

12. Since the Clean Air Act was passed in 1970, why is the air still not clean?

Answers

Answer:

Congress designed the Clean Air Act to protect public health and welfare from different types of air pollution caused by a diverse array of pollution sources.

Explanation:

what is the velocity of 8.01

Answers

Answer: The velocity of what?

If there were no dark energy in the universe, the value of __________ would solely determine the evolution and fate of the universe.

Answers

Answer:

Ωmass

Explanation:

If there were no dark energy in the universe, the value of Ωmass would determine the evolution and fate of the universe.

If an atom has two protons and three electrons, then the atom is-?
A. positively charged.
B. negatively charged.
C. radioactive.
D. neutral.

Answers

Before solving this question, one has to remember the following facts.Protons are positively charged particles in an atom.Electrons are negatively charged particles in an atom.If protons are greater than electrons, then the atom is positively charged.If electrons are greater than protons, then the atom is negatively charged.If both are equal, then the atom is in neutral state.Here, the number of protons = 2Number of electrons = 3.Since, number of protons < number of electronsTherefore, the atom is negatively charged.

Hope you could get an idea from here.

Doubt clarification - use comment section.

A 40 N block is resting on a rough inclined plane. The static friction between the block and the plane is ____ N.​

Answers

The static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].

The given parameters:

Weight of the block, W = 40 N

The normal reaction on the rough surface due to weight of the block is calculated as follows;

[tex]F_n = 40 \ N[/tex]

The static friction between the block and the plane is calculated as follows;

[tex]F_s = \mu_s F_n[/tex]

where;

[tex]\mu_s[/tex] is coefficient of static friction

Thus, the static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].

Learn more about static friction here: https://brainly.com/question/13680415

what does a pair of shoes weigh on mars?

Answers

Answer:

0.76 lbs (if shoes 2lbs)

Explanation:

Gravity on Mars is only ~38% as strong as it is on Earth, so objects would only weigh ~38% of their Earth weight.

a car is travelig at 20.0 m/s when the driver applies the brakes and comes to a stop. if the car slows down uniformly with an acceleration of -4.20 m/s, about how far does the car travel before coming to a rest

Answers

Since acceleration is constant, we can use the formula

v² - u² = 2a ∆x

where v = final velocity, u = initial velocity, a = acceleration, and ∆x = displacement. Then

0² - (20.0 m/s)² = 2 (-4.20 m/s²) ∆x

⇒   ∆x = (20.0 m/s)² / (8.40 m/s²) ≈ 47.6 m

An object is dropped from a building and strikes the ground with a speed of 52 m/s. How tall is the building?

Answers

Answer:

5.3 0 meter is the hight of the building is it

what do i do on this rubixs cube

Answers

Answer:

You solve it

Explanation:

Answer:

you just spin it and spin it and spin it                                                                                                                   and spin it                      

and spin it

and spin it

and spin it

and spin it

until you get mad then throw it at the wall

Explanation:

ya then you look up a vid that is called rubix cube meme and there should be a pink animal its funny you should watch it!!!!!!!!!

Name the two sources of light.​

Answers

Answer:

Natural light (Sun, stars.etc.) and Artificial light (Lamposts, televisions.etc.)

Hope that helps. x

A firecracker is placed in the middle of a room. When the firecracker explodes the parts of the firecracker scatter in all different directions. The total combined momentum of all the parts of the firecracker added together after the explosion must be



A.
more than before the explosion.

B.
less than before the explosion.

C.
can not tell from the given information

D.
the same as before the explosion.

Answers

Because momentum is a vector quantity, the total combined momentum of all the parts of the firecracker added together after the explosion must be the same as before the explosion. The correct answer is D

Given that a firecracker is placed in the middle of a room. This means that the firecracker is at rest. That is its momentum is equal to zero. When the firecracker is lit up, it will move in a certain velocity before it explodes. Since the total combined momentum of all the parts of the firecracker scatter in all different directions are considered, that is added up, then momentum will always be conserved. That is,

The momentum of an object before explosion will always be equal to the momentum of the object after explosion.

Because momentum is a vector quantity, in which we must consider it magnitude and direction, the best answer to this question is option D.

That is,

The total combined momentum of all the parts of the firecracker added together after the explosion must be the same as before the explosion

Learn more here: https://brainly.com/question/1141170

PLEASE HELP!!

NEED THIS IMMEDIATELY TODAY

NO LINKS

I WILL GIVE YOU BRAINLIEST IF YOU HELP ME!!

PLEASE HELP ASAP REALLY NEED THIS!!

(answer choices: applied force, normal force, friction, electrical force, magnetic force and gravitational force)

(question in picture)

Answers

Answer:

3

Explanation:

because they are pushing a body

The practice of science can answer only scientific questions. And scientific questions guide the design of investigations. What must be true of the possible answers to a scientific question? A. They are popular with a majority of scientists. B. They agree with all prior experiments. O C. They can be supported by evidence. O D. They lead to increased funding of scientific research.​

Answers

Answer:

They must be supported by evidence.

Explanation:

Every scientific theory or scientifc claim must have scientific evidence.

a -0.06 C charge is placed in a uniform electric field with a strength of 200 N/C. what is the magnitude and direction of the force on the charge​

Answers

The  magnitude and direction of the force on the charge​ is -12 N opposite the electric field

To calculate the force on a charge in an electric field, we make use of the formula below.

Formula

F = E×Q .......................... Equation 1

Where:

F = Force on the chargeE = Electric FieldQ = charge

From the question,

Given:

E = 200 N/CQ = -0.06 C

Substitute these values into equation 1

F = 200(-0.06)F = -12 N

Note: The negative sign indicates that the force is in the direction negative of the electric field.

Hence, The  magnitude and direction of the force on the charge​ is -12 N opposite the electric field

Learn more about Electric Field here: https://brainly.com/question/14015797

Answer: A edge 202694020

Explanation:

Other Questions
Look at this painting. It belongs to which artistic movement? What is the range of possible sizes for side x? Hannah completed 40 problems in 32 minutes.Put in a unit ratio Define a equilateral triangle How did technology change America during the Jacksonian period? 141x + 50 + 4x = 340What is x? A 6 character computer password is made up of 4 numbers followed by 2 letters. How many different passwords are possible? a. 810,000 b. 3,276,000 c. 6,500,000 d. 6,760,000 Please select the best answer from the choices provided A B C D. After I slept my tinnitus went away what happened? At the beginning of year 1, Sam invests $700 at an annual compound interestrate of 5%. He makes no deposits to or withdrawals from the account.Which explicit formula can be used to find the account'sbeginning of year 4? What is the balance? Question 1: Name the three locations where most immigrants first stepped onto American soil and give one fact for each. Question 2: Briefly describe what the experience was like for a typical immigrant family arriving at Ellis Island. Question 3: How was the experience for Asian immigrants at Angel Island different than of European immigrants at Ellis Island? Question 4: As you read the last two paragraphs of the assignment. complete the following to show how immigrant groups were held together and preserved their cultural traditions. One has been done for you in the chart ->> Look at the picture for this chart. Question 5: How did immigration change the United States? ( Will Mark Brainliest if answered correctly). Gordon types 2,584 words in 38 minutes. in what part of the body does most chemical digestion take place? Determine if the graph represents a linear function, quadratic function, or exponential function.Group of answer choicesExponentialLinearQuadratic As promised I I will be doing 100 points now please do NOT do anything that is not pertaining to the picture factorize 4y^2 - 2^2? PLZ HURRY YALL In transcription what makes mRNA molecule by attaching free floating rna nucleotides together ??? Use the diagram to answer the question that follows.What is the image of C under the translation described by the translation rule (x, y) + (x +4,y - 10)?DBEA In this activity, you will create a mind map showing the different pathways that can be found in the Government & Public Administration cluster. A mind map is a sketch or diagram that you can design yourself to organize your ideas. It could look like a tree with different branches or a park with different paths! Whatever you decide, you will put each pathway on a different spot on your mind map.Under each pathway, you will give one example of a job found in each pathway.Write a short note beside the job, explaining where you might find this person.List at least one task that they accomplish to keep things running for us. Part A. Jasmine wanted to cut some ribbon into 4 pieces, each 3 2/5 feet long. How big a piece of ribbon did she need to start with?Part B. When she went to the fabric store, they only had enough ribbon for her to make 2 1/2 pieces that were as long as she wanted. How much ribbon did the fabric store have? What is the difference between an element, compound, and a mixture