Answer:
C. Sturdy stems
Explanation:
Sturdy stems is the adaptation that enables water hyacinth to get nutrients directly from the water because there is no roots are present for the absorption of nutrients from water. The hollow bulbous stem below each leaf of water hyacinth allows the plant to get nutrients from the water. This hollow bulbous stem allow the plants to float on the water surface, keeping the leaves and flowers above the water so they don't rot.
how is the internal energy of the particles in the brake pads affected by the increase in temperature?
Answer:
increasedExplanation:As the temperature is increased the more the energy store
S. Explain the washing effects of detergents of soap and why detergents in warm water washes greasy
clothes even better
Answer:
Soaps and detergents are made from long molecules that contain a head and tail the detergent molecules also help to make the washing process more effective by reducing the surface tension of the water. Surface tension is the force which helps a blob of water on a surface hold its shape and not spread out.
An electric lamp is marked 100w 220v. What do you
understand by this? what current is taken by the lamp when it is connected to a 220v main supply. What is the resistance
of the lamp.
Answer:
The current is "[tex]\frac{5}{11} \ A[/tex]" and resistance is "484 ohm".
Explanation:
The given values are:
Potential difference,
V = 220 v
Power,
P = 100 w
Now,
The current will be:
⇒ [tex]P=VI[/tex]
On putting the values, we get
⇒ [tex]100=220\times I[/tex]
⇒ [tex]I=\frac{100}{220}[/tex]
⇒ [tex]= \frac{5}{11}[/tex] A
then,
Resistance will be:
⇒ [tex]V=IR[/tex]
⇒ [tex]220=\frac{5}{11}\times R[/tex]
⇒ [tex]R=44\times 11[/tex]
⇒ [tex]=484[/tex] ohm
State four components of a circuit
Answer:
» Battery or cell
» Switch
» Connecting wires
» Resistor or appliance
El siguiente esquema representa un objeto con un volumen de 2cm^3 sumergido en un recipiente que contiene agua. La densidad del agua es 1 g/cm^3 . Si solo la mitad del objeto se encuentra sumergido, el valor de la masa del agua desalojada por el objeto es de:
Answer:
Ver explicación
Explanation:
Según los principios de Arquímedes, el empuje hacia arriba de un objeto sumergido en un fluido es igual al peso del fluido desplazado.
Por eso
Empuje hacia arriba = volumen del objeto * densidad del fluido * aceleración debida a la gravedad
Empuje hacia arriba = 2 * 10 ^ -6 / 2 * 1 * 10 ^ 3 * 10
Empuje hacia arriba = 0.01 N
Desde;
Empuje hacia arriba = peso del fluido desplazado
peso del fluido desplazado = 0.01 N
Masa de fluido desplazado = 0.01 N / 10 = 1 * 10 ^ -3 Kg o 1 g
According to the special theory of relativity, what is the fourth dimension?
Explanation:
A four-dimensional space is a mathematical extension of the concept of three-dimensional or 3D space. Three-dimensional space is the simplest possible abstraction of the observation that one only needs three numbers, called dimensions, to describe the sizes or locations of objects in the everyday world.
According to the special theory of relativity, the fourth dimension is time. The special theory of relativity, proposed by Albert Einstein in 1905, revolutionized our understanding of space and time.
It states that space and time are interconnected and form a four-dimensional framework known as spacetime. In this framework, three dimensions correspond to space (length, width, and height), and the fourth dimension is time. Einstein's theory introduced the concept of time dilation, which means that time can appear to pass differently for observers in relative motion. This idea challenges the notion of time as an absolute quantity and demonstrates that it is influenced by an observer's relative motion and gravitational fields.
To visualize the fourth dimension, consider a space-time diagram where an object's position in space is plotted against time. Each point on the diagram represents an event, combining its spatial coordinates with the time at which it occurred. This four-dimensional representation allows us to understand the relationship between space and time in a unified framework.
Learn more about Special Theory of Relativity here:
https://brainly.com/question/14140033
#SPJ2
You are standing on a sheet of ice that covers the football stadium parking lot in Buffalo; there is negligible friction between your feet and the ice. A friend throws you a 0.400-kg ball that is traveling horizontally at 10.0 m/s. Your mass is 70.0 kg. (a) If you catch the ball, with what speed do you and the ball move after ward
Answer:
0.38m/s
Explanation:
Given data
M1= 0.4kg
U1= 10m/s
M2= 70kg
U2= 0m/s
The system experiences an inelastic collision, the expression for inelastic collision is
M1U1+ M2U1= (M1+M2)V
Subsitute
0.4*10+ 70*0= (0.4+10)*V
4= 10.4V
4=10.4V
V= 4/10.4
V=0.38m/s
Hence the common velocity is 0.38m/s
URGENT HELP PLS
1. Given a force-displacement curve as shown in the figure, what does the area of the region enclosed by the curve represent?
A. The force acting on the object
B. The displacement of the object
C. The magnitude of the coefficient of static friction
D. The work done on the object by the force
Explanation:
work done is equals to force into displacement in the direction of force
Ans: D
What is the connection between latitude and temperature?
What is the connection between longitude and temperature?
Answer:
1.Latitude forms an inverse relationship with temperature, where regions at lower latitudes have higher temperatures compared to areas at higher latitudes. The lower the latitude, the warmer the region becomes. Conversely, the higher the latitude, the colder the area becomes.
2.Latitude and longitude make up the grid system that helps humans identify absolute, or exact, locations on the Earth's surface. There is a relationship between latitude and temperature around the world, as temperatures are typically warmer approaching the Equator and cooler approaching the Poles.
How are wave properties and energy related?
give me examples
Answer:
They don’t ‘represent’ anything, they are properties of the wave.
Depending on the type of wave, we experience them as various phenomena. For example, with a sound wave we experience frequency (or wavelength, which is just another way to describe the same property) as the pitch of the sound. We experience amplitude as the loudness of the sound, although due to the characteristics of the ear, frequency also effects perceived loudness.
If the wave is a light wave, we experience the frequency (wavelength) as the colour of the light, and the amplitude as the brightness of the light.
For many waves, we don’t perceive them at all (e.g. radio waves).
For ocean waves, frequency is the time for each peak or trough to reach us, and amplitude is how tall the wave is.
A baseball player hits a 140 g baseball with a force of 2800 N. What is the
acceleration of the ball as it leaves the bat?
A. 0.050 m/s2
B. 20 m/s2
C. 390 m/s2
D. 20,000 m/s2
Which of these terms means an object's resistance to changing its motion?
Question 1 options:
inertia
velocity
newton
power
Question 2 (1 point)
Which of these equations is a representation of the 2nd Law of Motion?
Question 2 options:
v=d/t
W=Fd
F=ma
a=v/t
Question 3 (1 point)
Which words correctly complete the 3rd Law of Motion?
For every ___________ there is an equal and opposite ___________.
Question 3 options:
cause, effect
action, reaction
distance, velocity
cost, benefit
Question 4 (1 point)
Which of these could be a force that changes the motion of an object?
Question 4 options:
friction
a push or pull
air resistance
all of the above
Question 5 (1 point)
According to the second law of motion, which statement is TRUE?
Question 5 options:
every action has a reaction
a heavy object requires more force to push than a lighter object
an object at rest, stays at rest
heavy objects accelerate faster than lighter elements with the same force
Answer:
Inertia
F=ma
Action, reaction
All of the above
A heavy object requires more force to push than a lighter object.
What makes the results of a scientific experiment accurate? (5 points)
Answer:
A measurement is reliable if you repeat it and get the same or a similar answer over and over again, and an experiment is reliable if it gives the same result when you repeat the entire experiment.
Explanation:
Answer: when you repeat it and get the same results
Explanation:
When a scientist repeats an experiment with a different group of people or a different batch of the same chemicals and gets very similar results then those results are said to be reliable. Reliability is measured by a percentage – if you get exactly the same results every time then they are 100% reliable.
Which is true according to the law of conservation of energy?
ОА.
In a closed system, the total amount of energy in the universe keeps on changing
The supply of energy is limited, so it is essential to conserve it.
OB.
OC.
In a closed system, energy can be created and destroyed.
0In a closed system, energy cannot be used faster than it is created
O E.
In a closed system, the total energy always remains constant OD
Answer: Last option (total energy always remains constant)
Explanation:
The Law of Conservation basically states that energy cannot be created or destroyed. Only changed from one form to another (potential, kinetic, chemical, etc.) so it makes sense that the net energy is unchanging.
The blocks shown in the pictures below are all made of wood. Which car will move the fastest?
Answer:
The one with the less mass
Explanation:
The mirror is a opaque object. When light hits the mirror, a small amount is reflected and converted to thermal energy, while most of the light waves are
1. absorbed
2. transmitted
3. reflected
Answer:
3.When light incidents on a mirror , the most of the light waves are reflected.
Explanation:
What is mirror ?Mirror is a simple device that reflects light. It is an opaque object.It allows reflection but also absorb some amount of light waves.It also convert small amount of reflected rays in thermal energy.https://brainly.com/question/10507280
#SPJ2
The table below shows the speed of sound waves from musical sound sources at 20°C. Which conclusion can be made based on the information in the table? Wave speed and wavelengths can vary inversely to produce the same frequency. Frequency and wave speed can vary directly to produce the same wavelength. Wavelengths and frequency can vary inversely to produce the same wave speed. Frequency and wavelengths can vary directly to produce the same wave speed. Mark this and return
Answer:
c
Explanation:
Answer:
C
Explanation:
Took it on edg
Elena puts her eggs in a cage made out of wood. The wood breaks during
the landing, but the eggs survive. Which would be the best reason to
explain why this prevented her eggs from breaking?"
O Directs the energy of the impact towards the egg
O Decreases the velocity of the egg before it starts slowing down
O Increases the time that the egg slows down
O Decreases the time that the egg slows down.
O Directs the energy of the impact away from the egg
O Increases the velocity of the egg before it starts slowing down
Answer:
I think the answer is Decreases the time that the egg slows down.
Explanation:
If not try it starts slowing down
O Increases the time that the egg slows down.
Which of the following could be included in your gamer's creed that would help keep gamers safe?
A. I will work hard and play harder. Games are my life.
B. I will use privacy features that gaming sites provide to ensure I do not share personal information with strangers.
C. I will do whatever I can to win games I play online.
D. I will share the game equally with my friends and family.
swered
Answer:
The answer is B. I will use privacy features that gaming sites provide to ensure I do not share personal information with strangers.
Explanation:
It keeps you safe online
Answer: the answer is b
Explanation:
what do you mean by exercise
Answer:
exercise mean any bodily activity that enhances or maintains physical fitness and overall health and wellness.
I hope it will help you
An element in a similar period to carbon would be
A chlorine
B. hydrogen
C. fluorine
D. magnesium
Answer: C: Fluorine
Explanation:
Carbon is in period two on the periodic table of elements. The only other elements in this period are lithium, borilliym, boron, nitrogen, oxygen, flourine, and neon. Therefore, the answer must be C.
we are learning about sound waves and pitched. i need to know which glass will make a high pitch and which one will make a low one.
Answer:
the glass that has the most water produces the lowest pitch and the glass with the smaller amount produces the highest pitch
Explanation:
the glass full of water causes the glass to vibrate slower and the sound u hear is at a lower pitch
There is a fixed voltage across a resistor, and you measure a current of c1 A. If you replace the resistor with one that has twice the resistance value, how much current will you measure? a) 0.2 A b) 0.5 A c) 0.8 A d) 1.1 A
Answer:
Option B
Explanation:
Given
The current flowing through the circuit = 1 Ampere
As we know
I is inversely proportional to resistance.
I α 1/r
or I = k/r
If the resistor "r" is replaced by any resistor "R" with resistance = 2r, then the current will be
I = 1/2 of 1 ampere
I = 0.5 Ampere
Hence, option B is correct
A very long cylindrical shell made of copper has an inner radius 2 cm and an outer radius of 3 cm. This shell concentrically surrounds a very long charged aluminum rod of radius 1 cm with a charge density of 4 pC/m. All charges on the aluminum rod reside at its surface. The inner surface of the copper shell has exactly opposite charge to that of the aluminum rod while the outer surface of the copper shell has the same charge as the aluminum rod. Find the magnitude and direction of the electric field at points that are at the following distances from the center of the aluminum rod:
Question:
Find the magnitude and direction of the electric field at points that are at the following distances from the center of the aluminum rod:
(a) 0.5 cm, (b) 1.5 cm, (c) 2.5 cm, (d) 3.5 cm, (e) 7.0 cm
Answer:
(a) 0
(b) 4.795 N/C
(c) 2.877 N/C
(d) 2.055 N/C
(e) 1.027 N/C
Explanation:
The given parameters are;
The inner radius of the copper = 2 cm
The outer radius of the copper - 3 cm
The radius of the aluminum rod, r = 1 cm
The radius of the aluminum rod = 4 pC/m
a) The charge at the 0.5 cm from the center of the aluminum rod, E = 0
There is no charge inside the rod given that the aluminum road is a conductor of electricity, having all the charge on its surface
b) At 1.5 cm, we have;
[tex]E = \dfrac{2 \cdot \lambda}{4 \cdot \pi \cdot r \cdot \epsilon_0}[/tex]
Where;
[tex]\dfrac{ \lambda}{4 \cdot \pi \cdot \epsilon_0} = 8.99 \times 10^9 \times 4 \times 10^{-12}[/tex]
r = 1.5 cm = 0.015 m
∴ E = (2 × 8.99 × 10⁹ × 4 × 10⁻¹²)/0.015 ≈ 4.795
The magnitude of the electric field, E = 4.795 N/C
The direction of the charge depends on the charge sign on the rod
c) At 2.5 cm, we have;
r = 2.5 cm = 0.025 m
E = (2 × 8.99 × 10⁹ × 4 × 10⁻¹²)/0.025 ≈ 2.877
The magnitude of the electric field, E ≈ 2.877 N/C
d) At r = 3.5 cm, we have;
r = 3.5 cm = 0.035 m
E = (2 × 8.99 × 10⁹ × 4 × 10⁻¹²)/0.035 ≈ 2.055
The magnitude of the electric field, E ≈ 2.055 N/C
e) At
r = 7.0 cm = 0.070 m
E = (2 × 8.99 × 10⁹ × 4 × 10⁻¹²)/0.07 ≈ 1.027
The magnitude of the electric field, E ≈ 1.027 N/C
explain why does the bowling ball decelerate as it travels along the lane
The main cause of this is Friction. The more oil that is laid down, the less friction there is between the ball and the lane surface. The less friction, the harder it is for the bowler to send the ball in a curved path imparted by the spin that the bowler puts on the ball at the instant of release.
The process of generating an electric current from the motion of a conductor in a magnetic field is
a.
conduction.
b.
induction.
c.
motion.
d.
magnetism.
In which of the two situations described is more energy transferred?
Situation A - a cup of hot chocolate with a temperature of 40 °C inside a freezer at -20 °C
Situation B - the same cup of hot chocolate at 90 °C in a room at 25°C
Answer:
More energy is transferred in situation A
Explanation:
Each of the situations are analyzed as follows;
Situation A
The temperature of the cup of hot chocolate = 40 °C
The temperature of the interior of the freezer in which the chocolate is placed = -20 °C
We note that at 0°C, the water in the chocolate freezes
The energy transferred by the chocolate to the freezer before freezing is given approximately as follows;
E₁ = m×c₁×ΔT₁
Where;
m = The mass of the chocolate
c₁ = The specific heat capacity of water = 4.184 kJ/(kg·K)
ΔT₁ = The change in temperature from 40 °C to 0°C
Therefore, we have;
E₁ = m×4.184×(40 - 0) = 167.360·m kJ
The heat the coffee gives to turn to ice is given as follows;
E₂ = m·[tex]H_f[/tex]
Where;
[tex]H_f[/tex] = The latent heat of fusion = 334 kJ/kg
∴ E₂ = m × 334 kJ/kg = 334·m kJ
The heat required to cool the frozen ice to -20 °C is given as follows;
E₃ = m·c₂·ΔT₂
Where;
c₂ = The specific heat capacity of ice = 2.108 kJ/(kg·K)
Therefore, we have;
E₃ = m × 2.108 ×(0 - (-20)) = 42.16
E₃ = 42.16·m kJ/(kg·K)
The total heat transferred = (167.360 + 334 + 42.16)·m kJ/(kg·K) = 543.52·m kJ/(kg·K)
Situation B
The temperature of the cup of hot chocolate = 90 °C
The temperature of the room in which the chocolate is placed = 25 °C
The heat transferred by the hot cup of coffee, E, is given as follows;
E = m×4.184×(90 - 25) = 271.96
∴ E = 271.96 kJ/(kg·K)
Therefore, the total heat transferred in situation A is approximately twice the heat transferred in situation B and is therefore more than the heat transferred in situation B
Energy transferred in situation A = 543.52 kJ/(kg·K)
Energy transferred in situation B = 271.96 kJ/(kg·K)
Energy transferred in situation A ≈ 2 × Energy transferred in situation B
∴ Energy transferred in situation A > Energy transferred in situation B.
A block is pulled across a table by a constant force of 9.20 N. If the mass of the block is 2.30kg, how fast will the block be moving after 2.00 seconds? Assume negligible friction.
Answer:
[tex]8\:\text{m/s}[/tex]
Explanation:
From Newton's 2nd Law, we have [tex]\Sigma F=ma[/tex]. Using this, we can find the acceleration of the object:
[tex]9.20=2.30a,\\a=\frac{9.20}{2.30}=4\:\mathrm{m/s^2}[/tex].
Now that we've found the block's acceleration, we can use the following kinematics equation to find its final velocity after 2 seconds:
[tex]v_f=v_i+at,\\v_f=0+4(2),\\v_f=\boxed{8\:\text{m/s}}[/tex]
*Assumption: The block is initially at rest and has a initial velocity of zero. Otherwise, the question is unsolvable.
An Abrams tank has a mass of 62,Ō00 kg. If its top speed is 20.0 m/s, what is its momentum at top speed?
Answer:
1240000 kg * m/s
Explanation:
p = momentum
p = mass * velocity in kg* m/s
62,000 kg * 20 m/s = 1240000 kg * m/s
Iqbal has push a lighter box and seema has to push a similar heavier box on the same floor . Who will have to apply a larger force and why ?
Answer: Seema
Explanation:
When an object is on the floor, there is a force of friction acting on it. This force is higher if the object is heavier because the object would be pushing against the floor with more force.
To push such an object, one would have to apply enough force to break the friction holding the object to the floor and so with heavier objects, more force is needed to push the object because there is more friction acting on it.