Answer: 300 g
Explanation: I guessed and got it right
420 liter of volume is occupied by 300 grams of methane gas at standard temperature and pressure (STP).
How we write the ideal gas equation at STP?Ideal gas equation of methane gas at STP (standard temperature pressure) can be written as:
PV = nRT, where
P = pressure = 1 atm
V = volume = 420 L (given)
R = universal gas constant = 0.082 L.atm / k.mole
T = absolute temperature = 273 K
n = no. of moles to find?
Putting all these values in the above equation and calculated for the n:
n = (1 × 420) / (0.082 × 273) = 18.76 moles
Now we calculate mass of methane by the definition of moles as:
n = W/M, where
M = molar mass of methane = 16 g/mole
W = to find?
W = 18.76 × 16 = 300.2 grams or 300grams.
Hence, option (c) is correct i.e. 300 grams of methane occupy 420 L volume.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/12873752
a car motor running as a car travels down the road.
Kinetic Energy
Potential Energy
Answer:
kinetic energy
Explanation:
force is used
Areas in Mexico and Central America are known as
Identify any incorrect formulas. Explain your answer.
a. Mg2(SO4)3
b. Rb3As
c. BeCl3
d. NaF
Wish I could award more points but I'm running low.
The formula of a compound is written based on the valency of each bonded atoms. The formulas Mg₂(SO₄)₃, Rb₃As are incorrect. Such compounds does not exist.
What is chemical formula?The formula of a chemical compound is written based on the number of atoms participated in bonding. Magnesium is second group element having two valence electrons.
Magnesium thus donates its two electrons into the bonding atom or group. The sulphate group SO₄ have a valency of 2 it gains two electrons from Mg when bonded.
Thus the formula of magnesium sulphate being MgSO₄ and not Mg₂(SO₄)₃. Similarly Rb is a second group metal having two valence electrons. Its valency being two. As is a halogen with valency one. Thus they cannot form a compound like Rb₃As.
Hence, option a and b are incorrect formulas.
To find more about chemical formulas, refer the link below:
https://brainly.com/question/11995171
#SPJ2
Chemistry Challenge
Imagine someone who had never seen a city before.
They have lived their entire life alone, in a cave.
Answer
How could you get them to understand a city without
taking them there?
.
Students, write your response!
Pear Deck Interactive Slide
Do not remove this bar
Answer:
I will draw how the city looks like
If 2.50 grams of ethane is allowed to react with 5.00 grams of oxygen how many grams of water would be expected?
Answer:
The mass of water produced is 4.29 g.
Explanation:
Given;
reacting mass of ethane, C₂H₆ = 2.5 g
reacting mass of oxygen, O₂ = 5.0 g
The balanced combustion reaction is given as follows;
2C₂H₆ + 7O₂ ----------------> 4CO₂ + 6H₂O
Based on the balanced equation above;
requires
7.0 moles of oxygen -----------------------> 2.0 moles of ethane
requires
5.0 g of oxygen --------------------------> x gram of ethane
x = (2 x 5) / 7
x = 1.43 g
Ethane is in excess of 1.07g (2.5 g - 1.43g)
Now, determine the mass of water produced by 1.43 g of ethane;
requires
2.0 moles of ethane -----------------------> 6.0 moles of water
requires
1.43 g of ethane --------------------------> y gram of water
y = (6 x 1.43) / 2
y = 4.29 g
Therefore, the mass of water produced is 4.29 g.
mole equations please help me :(
Answer:
A. 0.48mol O2
Explanation:
The balanced equation is given as follows:
2CH3OH + 3O2 → 2CO2 + 4H2O
This shows that 2moles of CH3OH is required to react with 3 moles of O2
If 0.32 moles of CH3OH are reacted, then;
0.32 × 3/2 moles of O2 is required
= 0.96/2
= 0.48mol of O2
Match the terms to their definition.
1 .
Male gonads
conception
2 .
a body chemical that controls growth and activity
eggs
3 .
The fertilization of a female egg cell with a male sperm cell
fertilization
4 .
The union of the male gamete (sperm cell) and the female gamete (egg cell)
gonad
5 .
gamete-producing organ in animals
hormone
6 .
Female reproductive cells
ovary, ovaries
7 .
The male reproductive cell
sperm
8 .
Female gonads
testes, testicles
Answer:
2
Explanation:
Answer:
1. Sperm - The male reproductive cell
2. Fertilization - The union of the male gamete (sperm cell) and the female gamete (egg cell)
3. Conception - The fertilization of a female egg cell with a male sperm cell
4. Testes, Testicles - Male gonads
5. Ovary, Ovaries - Female gonads
6. Gonad - Gamete-producing organ in animals
7. Eggs - Female reproductive cells
8. Hormone - a body chemical that controls growth and activity
Explanation:
Hope this helped!
What is the most likely oxidation state of nitrogen?
O A. -2
OB. +3
O C. +4
O D.-3
D is the answer -3 m
If the moon is full on January 16, on approximately what date will it be full in February?
A. February 10
B. February 22
C. February 1
D. February 12
Answer:
February 12th.
Explanation:
Trust me.
How many electron shells does a neon atom have?
Answer:
2 electron shells
hope it helps
and your day will be full of happiness
I could swear all of these are nobles gases but here’s the question.
Which one of these is NOT a Noble Gas
A) Argon
B) Helium
C) Xenon
D) Neon
If 0.525 moles of O2 are produced, how many moles of KClO3 are decomposed?
Answer:
B. 0.35mol KClO3
Explanation:
The balanced equation in this question is given as follows:
2KClO3 → 2KCl + 3O2
Based on the chemical reaction;
2 moles of KClO3 decomposes into 3 moles of O2
If 0.525 moles of O2 are produced, then:
= 0.525 × 2/3
= 1.05/3
= 0.35mol of KClO3 is decomposed.
What do acids do in solution?
11.7 g of NaCl and 4.5 g of KBr were dissolved
in 47 g of water. What is the molality of NaCl
in the solution?
Answer:
4.26m
Explanation:
Molality , m, is an unit of concentration in chemistry defined as the ratio between moles of solute (In this case, NaCl) and kg of solvent (In this case, water).
To solve the question we need to find the moles of NaCl and the mass of water in kg:
Moles NaCl -Molar mass: 58.44g/mol-:
11.7g * (1mol / 58.44g) = 0.200 moles
Mass of Water in kg:
47g * (1kg / 1000g) = 0.047kg
Molality is:
0.200 moles / 0.047kg =
4.26m
What does the poitof incidence mean?
Answer:
Point of incidence: The point on the surface where the incident ray strikes the surface is called the point of incidence. Reflected ray: The ray of light that bounces back from the surface of an object is called a reflected ray of light.
Explanation:
Search
how do i get my skin perfect without expensive products? I'm asking bc my face and neck have been massively breaking out with pimples and sweat bumbs. i can go out in public its so bad plsss help
Answer:
if you are a teen then its pretty normal as during the age of adolescent sweat gland become active and pimples take place on you face , no need to worry at this your face will become beautiful again .
but if you are above 25 then it is a time to worry , you should consult a doctor or you can use alovera jel or any other home remedies. :)
If 5 times a number is increased by 4 the result is 19 find the lest possible number that satisfies theses condition
Answer: 3
Explanation: 5 times a number would be 5x, then increase that by 4 is 5x+4. The problem then says 5x + 4 ≥ 19. If we solve for x then we get x ≥ 3 so x has to be greater than or equal to 3, so the smallest number it could be is 3. You can even try any number smaller than 3 and see it doesn't work. even something like 2.9
Cells come from other cells.
Question 2 options:
True
Never
False
Sometimes
Answer:
True
Explanation:
this is part of the cell theory
Which is the best method of obtaining pure water from lemonade?
Answer:
filtration is the answer
Explanation:
Which of the following is not an example for electroplating? A Tin cans for storing food
B Chromium used on bath taps to get shiny appearance
C Copper used for making electrical wires
D To protect iron objects used in machineries, from corrosion
If you answer you will get brainiest
Please answer and thank
Answer:
C. Copper used for making electrical wires
Explanation:
When a coating of a particular metal is applied on another metal, the process is termed as electroplating. The process is carried by the process of electro-deposition. This process is carried on in order to enhance the quality of the objects manufactured. The coating helps in resistance and provides an attractive appearance to the object.
Option C. is not an example of electrocoating because on the copper wires no other metal coating is done. In all the other three options, coating has been done on the object.
Which term describes living things? abiotic biotic
Answer:
biotic
Explanation:
Which change in pH represents a hundredfold increase in the concentration of hydronium ions
in a solution?
(1) pH 1 to 2
(2) pH 1 to 3
(3) pH 2 to 1
(4) pH 3 to 1
Answer:(4) pH 3 to 1
Explanation:
im 95% sure its the right answer
Describe how greater distance affects the appearance of an object’s size and brightness
Answer:
Distance also affects the apparent brightness of an object. A distant, but very energetic star can appear dimmer to us than a lower-energy, but closer one. ... Each of their effective temperatures results in a different brightness for the object. The quasar, however, is very far away, and so appears dim.
Explanation:
HELLP PLEASE
_ Na+Cl 2 -> _NaCl
reactant side number of atoms?
Na = ?
Cl = ?
Product side number of atoms?
Na = ?
Cl = ?
what is the final equation?
_ Na+Cl 2 -> _NaCl
Answer:
2Na+Cl2 -> 2NaCl
Explanation:
1Na+1Cl 2 -> 1NaCl (i'm assuming they want you to balance it so ill start with 1)
Na = 1
Cl = 2 (it is 2 because it is Cl2, meaning that there are 2; but remember that you cannot change this number only coefficients)
Na = 1
Cl = 1
We need to have 2 Cl on the product side
1Na+1Cl 2 -> 2NaCl
Now we need 2 Na on the reactants side
The final equation is
2Na+Cl2 -> 2NaCl
Now it is balanced
Na = 2
Cl = 2
--
Na = 2
Cl = 2
What group on the periodic table has the fewest valance electrons
Answer:
Alkali metals
Explanation:
The lowest number of valence electrons is found in the alkali metals (group 1), which have only one valence electron per atom.
Answer:
Alkali metals:) im 100% sure because i just got done learning everything in the periodic table:)
Explanation:
Equilibrium constant Kp for the reaction P4(s) + 6Cl2(g) 4PCl3(l) Kp = 1/ P6Cl2 Kp = P4Cl3/ P6P4 Kp = P4Cl3/ (P6P4) (P6Cl2) Kp = 1/ (P6P4) (P6Cl2)
Answer: [tex]K_p=\frac{1}{[p_{Cl_2}]^6}[/tex]
Explanation:
Equilibrium constant is defined as the ratio of pressure of products to the pressuure of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_p[/tex]
For the given chemical reaction:
[tex]P_4(s)+6Cl_2(g)\rightarrow 4PCl_3(l)[/tex]
The expression for [tex]K_p[/tex] in terms of gaseous is written as:
[tex]K_p=\frac{1}{[p_{Cl_2}]^6}[/tex]
Kevin is working on a model that shows the positions of Earth, the Moon, and the Sun during the phases of the Moon. How should he position them to show a New Moon?
In an ecosystem, which of the fcHlowing is NOT a trait of living organisms?
Contains DNA
Can reproduce
Made of cells with membrane
Responds to stimuli
Answer:
responds to a stimuli or made of cells with membrane
Explanation
What is the name of this nuclear process ?
Answer:
Fission
Explanation:
Which rate law is consistent with the mechanism?