Answer:
a. changes with temperature.
Explanation:
Hello there!
In this case, according to the thermodynamic definition of the equilibrium constant in terms of the Gibbs free energy of reaction and the temperature of the system:
[tex]lnK=-\frac{\Delta G}{RT}[/tex]
It is possible to figure out that the equilibrium constant varies as temperature does, not only on the aforementioned definition, but also in the Gibbs free energy as it is also temperature-dependent. Therefore, the appropriate answer is a. changes with temperature.
Best regards!
In which atmospheric layer is the ozone layer? O stratosphere o thermosphere O mesosphere troposphere
Answer:
The stratosphere
Explanation:
B) Which of these is NEVER an example of freshwater? A) Pacific Ocean B) Okefenokee Swamp Mississippi River Lake Pontchartrain.
Answer:
Lake pontchartrain
Explanation:
CuCl2(aq) + Na3PO4(aq) =>?
Net ionic equation
What is the first step in this
experiment?
Answer: Cut the card borad
Explanation:
What physical property is characteristic of all of the elements in the group located in the rightmost column of the periodic table?
The physical property that is characteristic of all of the elements in the group located in the rightmost column of the periodic table is the gaseous state at room temperature.
What are Physical properties?Physical properties may be defined as those properties of matter that do not involves any chemical manifestation or appearance within the element. These properties are measurable and state the alteration between momentary states. Some examples of physical properties are as follows:
Physical appearance or color.Hardness of elementDensity.Melting and boiling points.Electrical conductivity.The groups located in the rightmost column of the periodic table are known as the halogens and the noble gases. These elements are typically gaseous in phase at room temperature. Apart from this, halogens also have high electronegativities because these elements have seven electrons in their valence electrons.
Therefore, the gaseous state at room temperature is the physical property that is characteristic of all of the elements in the group located in the rightmost column of the periodic table.
To learn more about the Modern periodic table, refer to the link:
https://brainly.com/question/15987580
#SPJ6
name this structure
Answer:
The fourth one- bromo trifluoro methane
Explanation:
Answer:
D
Explanation:
I believe the answer is the 4th option, bromo-trifluoro-methane
Help me with this question
Answer:
your cool
Explanation:
owa owa owa owa owa bob
How many grams of phosphorous is in the human skeleton if its average
weight is 11 kg and contains 58% of calcium phosphate (Ca3(PO4)2)?
An average bushel of apples has a mass of 10 kg and contains 5 dozen apples.
What would be the average mass of 6 apples?
Answer:
Average mass of 6 apple = 1 kg
Explanation:
Given:
Average mass of 5 dozen apple = 10 kg
Find:
Average mass of 6 apple
Computation:
Average mass of 6 apple = [Average mass of 1 apple] x [6 apple]
Average mass of 6 apple = [10/(12 x 5)] x [6]
Average mass of 6 apple = 1 kg
The number of moles of molecules in a 12.0-gram sample of Cl2 is equal too?
Answer:
0.3529moles
Explanation:
no of moles =mass ÷molar mass
molar mass =17+17
=34
12÷34
=0.3529moles
According to the mole concept, the number of moles of molecules in a 12.0-gram sample of Cl₂ is equal to 0.169 moles.
What is a mole?
Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.Number of moles is mass/molar mass= 12/70.90=0.169 moles.
Learn more about mole,here:
https://brainly.com/question/20486415
#SPJ6
What does purified water and fluorine make?
Answer:
Adding fluoride to the water supply reduces the incidence of tooth decay. Fluoride protects teeth from decay by demineralization and remineralization. Too much fluoride can lead to dental fluorosis or skeletal fluorosis, which can damage bones and joints.
Explanation:
N/A
What is the mass of 2 moles of nitrogen gas, N2?
Answer:
28g
Solution. Hence, 2 moles of nitrogen atoms weigh 28g.
When a solid turns into a liquid what is happening to the relationship between the forces?
What are two things that interact that determine if there is a phase change or not HELP
Answer:
phase change always has two phases in contact during the change. melting => solid & liquid; evaporation (boiling) => liquid & vapor. If only one phase is present, then phase change is not occurring. Also, when two phases are in contact, no temperature changes occur. Only the pure phase demonstrates temperature change when measured. Example, when ice is added to water, at thermal equilibrium (temp = 0°C) the water temp will not continue to change. Only when all the ice has melted will the water temperature demonstrate a measured temperature change.
Explanation:
Pleaseeeee guysssss
Explain Which enthalpy diagram shows that the reaction above is an exothermic reaction that produces -550 kJ of heat? Why? The
Answer:
no answer of this question
Which is not true of the cell theory?
which is NOT true about the cell theory?
A:all living organisms are composed of cells
B:all cells have a nucleus, which acts like the brain of the cell
C:all cells come preexisting living cells
D:the cell is the most basic part of a living organism
PLEASE HELP WORTH 100 POINTS !!!!!
Answer: Imidogen
Explanation: I just looked it up.
Answer:
Imidogen
Explanation:
8) All of the following statements are true except ________. A) Internal energy is a state function. B) The enthalpy change for a reaction is equal in magnitude, but opposite in sign, to the enthalpy change for the reverse reaction. C) The enthalpy change for a reaction depends on the state of the reactants and products. D) The enthalpy of a reaction is equal to the heat of the reaction. E) Enthalpy is an intensive property.
Answer:
E. Enthalpy is an intensive property Is false.
Explanation:
The false or wrong option in this question is that Enthalpy is an intensive property.
To explain this, I would first explain an intensive property. An intensive property is one that does not depend on the quantity or the mass of matter. Examples are temperature and pressure.
But an extensive property is a property which depends on the mass and the quantity of the system. Enthalpy, volume are all extensive.
Please help me thanks:)
Answer:
where it goes
Explanation:
Answer:
I didn't do the observation that the question said so I can't help sorry
What is the composition of a universal indicator?
Answer:
The main universal indicator is in the form of a solution and are thymol blue , methyl red , bromothymol blue and phenolphthalein this mixture is important because each component loses or gains protons depending upon the acidity of the solution being tested .
maybe this mighr help u
As a raindrop falls from a cloud to the surface of Earth,
A. its speed increases due to gravity.
B. its speed increases due to air resistance,
C. it moves at a constant speed,
<
OD. it moves at a constant velocity
Answer:
The answer is C!
Explanation:
Hope it helps
Answer D
Explanation: did the quiz ψ(｀∇´)ψ
What volume in
L
of a 0.724 M Nal solution contains 0.405 mol of Nal ?
Answer:
[tex]0.5594\ \text{L}[/tex]
Explanation:
Mol of NaI = 0.405 mol
Molarity of solution = 0.724 M
Molarity is given by
[tex]M=\dfrac{\text{mol}}{\text{Volume of solution in }NaI}\\\Rightarrow \text{Volume of solution in }NaI=\dfrac{0.405}{0.724}\\\Rightarrow \text{Volume of solution in }NaI=0.5594\ \text{L}[/tex]
The required volume is [tex]0.5594\ \text{L}[/tex].
A 0.00215-g sample of polystyrene, a polymer composed of carbon and hydrogen, produced 0.00726 g of CO2 and 0.00148 g of H2O in a combustion analysis. What is the empirical formula for polystyrene?
Answer:
CH
Explanation:
Polystyrene is composed only by C and H.
We can calculate the number of C moles contained in the original sample mass (0.00215 g), using the produced mass of CO₂:
0.00726 g CO₂ ÷ 44 g/mol = 1.65x10⁻⁴ mol CO₂As 1.65x10⁻⁴ moles of CO₂ were produced, in the polystyrene sample there were 1.65x10⁻⁴ moles of C.
Now we calculate how many moles of H₂O were produced:
0.00148 g H₂O ÷ 18 g/mol = 8.22x10⁻⁵ mol H₂OThe number of H moles produced is double the amount of H₂O moles, so in the polystyrene sample there were 1.64x10⁻⁴ moles of H.
The number of C and H moles are the same, this means the empirical formula is CH.
You have a container which has the capacity to hold 3 L water. If it already has 2.25 L water in it, how much more water in mL can you still add to fill it completely?
Rubbing alcohol is 70.% (v/v) isopropyl alcohol by volume. How many mL of isopropyl alcohol are in a 1 pint (473 mL) container? Rubbing alcohol is 70.% (v/v) isopropyl alcohol by volume. How many mL of isopropyl alcohol are in a 1 pint (473 mL) container? 330 mL 470 mL 70. mL 680 mL 0.15 mL
Answer:
helped
The number of ml of isopropyl alcohol that are 1 pint (473 Ml) is 331.1 Ml
calculation
assume that the 1 pint is in a container
This implies that the 1 pint (473 ml) is in 100 % M/V
what about 70 %(M/V)
that is 473 Ml = 100 %
? = 70 %
by cross multiplication
= 473 x70/100 = 331.1 Ml
Explanation:
3x + 4y - 3z) - (2x - 6y + 7z)
x + 10y - 10z
x + 10y - 10z
x -10y - 10z
Answer: x + 10y - 10z is the answer
Explanation:
Why do materials interact to light differently?
Answer:
Refracted (refraction) – the bending of transmitted light as it travels across the boundary of one material into another material in which it's speed is different. Unlike diffraction, this change in direction of light occurs because light is changing its speed in the different substances in it traveling in.
Explanation:
Hope it helps
0.254g lead(ii)ethanoate, on adding excess K2CrO4 solution, gave 0.130g of lead(ii)chromate precipitate. what is the percentage composition of Pb in the organic salt? (O = 16, Cr = 52, Pb = 207).
Answer:
32.8%
Explanation:
All of the Pb⁺² species precipitated as lead(II) cromate, PbCrO₄ (we know this as excess K₂CrO₄ was used).
First we convert 0.130 g of PbCrO₄ into moles, using its molar mass:
0.130 g ÷ 323 g/mol = 4.02x10⁻⁴ mol PbCrO₄There's 1 Pb⁺² mol per PbCrO₄ mol, so in total 4.02x10⁻⁴ moles of Pb⁺² were in the ethanoate sample.
We convert those 4.02x10⁻⁴ moles of Pb into grams:
4.02x10⁻⁴ mol * 207 g/mol = 0.083 g PbFinally we calculate the percentage composition of Pb:
0.083 g Pb / 0.254 g salt * 100% = 32.8%2) A common "rule of thumb" -- for many reactions around room temperature is that the
rate will double for each ten degree increase in temperature. Does the reaction you hav
studied seem to obey this rule.
The question is incomplete. The complete question is :
A common "rule of thumb" for many reactions around room temperature is that the rate will double for each ten degree increase in temperature. Does the reaction you have studied seem to obey this rule? (Hint: Use your activation energy to calculate the ratio of rate constants at 300 and 310 Kelvin.)
Solutions :
If we consider the activation energy to be constant for the increase in 10 K temperature. (i.e. 300 K → 310 K), then the rate of the reaction will increase. This happens because of the change in the rate constant that leads to the change in overall rate of reaction.
Let's take :
[tex]$T_1=300 \ K$[/tex]
[tex]$T_2=310 \ K$[/tex]
The rate constant = [tex]$K_1 \text{ and } K_2$[/tex] respectively.
The activation energy and the Arhenius factor is same.
So by the arhenius equation,
[tex]$K_1 = Ae^{-\frac{E_a}{RT_1}}$[/tex] and [tex]$K_2 = Ae^{-\frac{E_a}{RT_2}}$[/tex]
[tex]$\Rightarrow \frac{K_1}{K_2}= \frac{e^{-\frac{E_a}{RT_1}}}{e^{-\frac{E_a}{RT_2}}} $[/tex]
[tex]$\Rightarrow \frac{K_1}{K_2}= e^{-\frac{E_a}{R}\left(\frac{1}{T_1}-\frac{1}{T_2}\right)}$[/tex]
[tex]$\Rightarrow \ln \frac{K_1}{K_2}= - \frac{E_a}{R} \left(\frac{1}{T_1} -\frac{1}{T_2} \right)$[/tex]
[tex]$\Rightarrow \ln \frac{K_2}{K_1}= \frac{E_a}{R} \left(\frac{1}{T_1} -\frac{1}{T_2} \right)$[/tex]
Given, [tex]$E_a = 0.269$[/tex] J/mol
R = 8.314 J/mol/K
[tex]$\Rightarrow \ln \frac{K_2}{K_1}= \frac{0.269}{8.314} \left(\frac{1}{300} -\frac{1}{310} \right)$[/tex]
[tex]$\Rightarrow \ln \frac{K_2}{K_1}= \frac{0.269}{8.314} \times \frac{10}{300 \times 310}$[/tex]
[tex]$\Rightarrow \ln \frac{K_2}{K_1}= 3.479 \times 10^{-6}$[/tex]
[tex]$\Rightarrow \frac{K_2}{K_1}= e^{3.479 \times 10^{-6}}$[/tex]
[tex]$\Rightarrow \frac{K_2}{K_1}= 1$[/tex]
∴ [tex]$K_2=K_1$[/tex]
So, no this reaction does not seem to follow the thumb rule as its activation energy is very low.
how many grams are there in 3400 moles of tetranitrogen dicarbide?
Explanation:
molar mass of tetranitrogen dicarbide S4N4= 4×32+4×14
128+56
184 g/mol
no.of moles =given mass/ molar mass
3400= given mass / 184
3400×184 =given mass.
625600 g