Answer:
Answer choice c = 174
Explanation:
If you divide 30% into 580 you get 174. You can also check your work by doing 580 divided by 70%
30% divided by 580 = 174
When Nitrogen gas gets cold enough it can form a liquid. This liquid nitrogen is an
example of what?
A. A chemical change because it took a significant temperature drop to convert
nitrogen from gas to liquid.
B. A chemical change because the nitrogen underwent a conversion from gas to a
liquids.
C. A physical change because it was only a state change from solid to liquid.
D. A physical change because the temperature drop causes the molecules to completely rearrange.
Answer:
C.
Explanation:
Phase change is physical.
When Nitrogen gas forms a liquid is a physical change because it was only a state change from solid to liquid. Therefore, option C is correct.
What is a physical change?A physical change takes place when some of the features of the matter change but the identity of the material does not. Physical changes can be categorized as reversible and irreversible. For example, the melting of water is reversible since the melted ice can be refrozen.
Physical change can be described as a kind of change where only physical properties of matter such as solubility, color, odor, etc. can change. During physical changes in matter, there will be no chemical bonds are broken or formed between atoms in the molecule.
The chemical composition as well as the chemical nature of the material will remain unchanged while a physical change. The molecules can rearrange without changing the internal chemical composition of matter.
Therefore, changing the state of nitrogen gas is a physical change.
Learn more about physical change, here:
brainly.com/question/17931044
#SPJ2
Which of the following is true of SOLUBILITY?
A. if something is soluble, it will dissolve in anything
B. water will dissolve everything
C. substances often dissolve in some things and not others
1.
What part of the human body is the wing most like? ANSWER
Help
What part of the human body is most likely the wing would proabably from your elbow joint and the rest of your arm but most likely it would be the elbow joint.
A crest of a wave with an amplitude of 3 meters intersects with another trough of a wave with an amplitude of 2 meters. What is the resulting amplitude?
3 meters
2 meters
6 meters
1 meter
Answer:
A 3 meters
Explanation:
A crest of the wave is the highest peak in the wave that shows the maximum displacement value. The intersection of the 3-meter and 2-meter waves results in amplitude of 1 meter. Thus, option D is correct.
What is amplitude?The amplitude of the wave is the measurement of the wave from the still position towards the crest or the trough of the wave. It is estimated in meters.
The elevation of the wave is at 3, and the depression is at 2 meters when intersected, which results in an amplitude causing destructive interference. As 3 m is above the baseline and 2 m is below the baseline the resulting amplitude will be, 3 - 2 = 1 m.
Therefore, the resulting amplitude is 1 meter.
Learn more about amplitude here:
https://brainly.com/question/26637895
#SPJ2
Can someone please help me
Answer:
I would say w is the answer
Answer
The answer is W
A rectangular block of copper metal has a mass of 1896 grams. The volume of the block is 2cm^3. From this data, what is the density of the copper?(Please show how you got this answer)
Which element could provide one atom to make an ionic bond with oxygen?
Answer:
Magnesium
Explanation:
The element that could provide one atom to make an ionic bond with oxygen is magnesium.
Generally, most group II elements will form an ionic bond with oxygen with just one atom.
An ionic bond forms by the transfer of electrons from one specie to another.
Oxygen has a charge of 2-, to use one atom to form ionic bond with this specie, a magnesium atom with 2+ charge will bond with the specie.
This will form:
MgO
This is notable for other group II elements.
A chemistry student is recording the electric charges of some atoms. Use the results in the chart to answer the following questions.
Atom Electric Charge
Carbon −4
Nitrogen +5
Oxygen −2
Part A:
Write an equation to find the difference in electric charge between the Nitrogen atom and the Oxygen atom.
Part B:
Using the equation you wrote in Part A, what is the difference in electric charge between the two atoms?
What function does this cytoplasm perform in a plant and animal cells
Answer:
It helps shape, while holding and keeping organelles in their place.
Explanation:
Answer:
it holds the cell organelles
Explanation:
You are welcome
How many elements are there in world
Answer:
4
Explanation:
earth
wind
water
fire
Answer:
Explanation:
There are total 118 elements in the world.
At a depth of 100 ft in water, the external pressure is 4.0 atm. What is the solubility of N2 from air in blood at this pressure
Answer:
Solubility = 2.142 x [tex]10^{-4}[/tex] M
Explanation:
Solution:
Note: This question is incomplete and lacks necessary data to solve this question. But I have found similar question on the internet and fetched the necessary data to solve:
Missing Data:
Number of Moles of N2 dissolved per litre of blood = 5.357 x [tex]10^{-4}[/tex] M
As we know that, the air is approximately. 78 mol % of N2
N2 = 0.78
Partial pressure of the N2 at 100 ft:
Partial Pressure = 0.78 x (4.0)
Partial Pressure = 3.12 atm
Now, this is 4 times the pressure of nitrogen at 1 atm air pressure.
SO,
According to the Henry's Law, we have:
Solubility = k x [tex]P_{g}[/tex]
Here, k = 4 times
So,
Solubility = 4 x (5.357 x [tex]10^{-4}[/tex])
Solubility = 2.142 x [tex]10^{-4}[/tex] M
Which structures group together to form a system in the human body
Answer:
organs group together to form organ systems
Explanation:
Used in ur own words, How are elements,compounds,and mixtures different?
Explanation:
Elements are pure substances made up of only atoms that all have the same number of protons in their nuclei. Compounds are molecules held together by covalent bonds. Ionic compounds are held together by ionic bonds. Intermetallic compounds are held together by metallic bonds. Certain complexes are held together by coordinate covalent bonds. A mixture is a combination of two or more elements or compounds which haven't bonded yet, so each mixture is it's own.
Hope this helps!
Please mark brainliest!
Please answer question #4
Answer:
F=500×3 = 1500 N
W = 1500×10 =15000 Nm
What increases pressure?
a
more particles and higher temperatures
b
higher volume
c
number of particles
d
higher temperature
Answer:
A
Explanation:
more particles means things are heating up
Ex: Water. More bubbles form once water reaches it boiling point
If a 12-volt battery produces a current of 20 amps, what is the resistance?
Answer:
0.6 Ω
Explanation:
From the question given above, the following data were obtained:
Voltage (V) = 12 V
Current (I) = 20 A
Resistance (R) =?
From Ohm's law,
V = IR
Where:
V => is the voltage
I => is the current
R => R is the resistance
With the above formula, we can obtain the resistance as follow:
Voltage (V) = 12 V
Current (I) = 20 A
Resistance (R) =?
V = IR
12 = 20 × R
Divide both side by 20
R = 12 / 20
R = 0.6 Ω
Thus the resistance is 0.6 Ω
Explain using specific
examples how the skeleton
provides the body with
physical protection and
protection against
infection. (6 marks)
Answer:
dysrdtsrjhtkssxxjtcftj
Answer:
The vertebral column holds the body upright. Movement - muscles are attached to bones, which are jointed. When the muscles contract the bones move. Blood production - red blood cells (to carry oxygen) and white blood cells (to protect against infection) are produced in the bone marrow of some bones.
If one parent has sickle cell anemia and the other parent is a carrier, what is the possibility that their child will have sickle cell anemia
Consider the heating curve for water. At what temperature does the solid start melting? –20°C 0°C 20°C 80°C
Answer:
0°C
Explanation:
The melting point of water - the temperature at which solid water begins to melt - is 0°C at a pressure of 1 atm. In the heating curve of water, below 0°C we have solid water. Then, at 0°C the solid water starts to melt by forming liquid water. Above 0°C, when the total amount of water is in the liquid state, the liquid water begins to heat (it increases its temperature).
Answer:
the answer is 0 degrees C.
Explanation:
According to cell theory, where do plant cells come from?
A) organelles
B) other plant cells
C) protein synthesis
D) chemical reactions
Please help!
how can an xray image show differences between bone and soft tissues, such as muscles and lungs? How might the atoms that make up bones be different from the atoms that make up soft tissues?
Answer with Explanation:
1. An "x-ray image" shows the difference between the bones and soft tissues because the bones appear white in color while the soft tissues appear gray in color.
2. The reason behind the difference in the appearance of bones and soft tissues on the x-ray film is their density. Bones are denser than soft tissues, which means that its atoms are closely-knitted when compared to the soft tissues that are far apart from each other. This allows the x-ray radiation to be absorbed by the bone while it passes through most of the soft tissues.
This is the reason why pregnant women are advised not to undergo an x-ray examination because the fetus is denser and it will surely absorb the x-ray radiation.
An X ray is a X wave radiation that can penetrate from a high EMR and has wavelengths that are shorter than the UV rays. The concept of X rays where discovered in 1895.
The X ray image shows the difference between bones and the soft tissues. As the bones appear to be white in color and soft tissues appear grey in color. As lungs also consists of bones they can vividly shown. Due to the bones being made of calcium they are different form the atoms that makes the soft tissues.Learn more about the x-ray image show differences between bone and soft.
brainly.in/question/32495134
What is a paleontologist?
is the biosphere contains only non-living thing true or false
Answer:
False
Explanation:
It’s both living and non living
Answer:
False
Explanation:
In biospheres, there are both living and nonliving objects present! There are typically large abundances of living objects, such as animals, trees, grass, etc. There are also nonliving objects included in biospheres that are necessary for the prosperity of the living creatures! Examples of these nonliving objects include water for hydration, air for breathing, soil for growth, etc. A biosphere is where all living things are found on Earth, so the question is false since both types of things are found within them and not just nonliving things!
which structure below represents the arrangement of atoms in pure copper ?.
Which best replaces the question mark?
Answer:Waves.sry if this is wrong.
Explanation:
How many moles of platinum atoms are in 2.408 x 1023
answer:
The mass of 4×10²¹ atoms Pt is ≈ 1 g Pt.
explanation:
State two things that happen to wave when it passes from one material into another material
Answer:Radio waves move through the air at the same speed as visible light, Sound waves are mechanical waves all sound waves regardless of there spee or frequency.
Explanation: I got my answer from stemscopes.
How many molecules OF2 would have a mass of .132 g
1.47 × 10²¹ molecules OF₂
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional Analysis Explanation:Step 1: Define
0.132 g OF₂
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of O - 16.00 g/mol
Molar Mass of F - 19.00 g/mol
Molar Mass of OF₂ - 16.00 + 2(19.00) = 54.00 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 0.132 \ g \ OF_2(\frac{1 \ mol \ OF_2}{54.00 \ g \ OF_2})(\frac{6.022 \cdot 10^{23} \ molecules \ OF_2}{1 \ mol \ OF_2})[/tex]Divide/Multiply: [tex]\displaystyle 1.47204 \cdot 10^{21} \ molecules \ OF_2[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
1.47204 × 10²¹ molecules OF₂ ≈ 1.47 × 10²¹ molecules OF₂
If an effusion experiment, it required 45 seconds for
a certain number of moles of an anknown gas to pass through
a small orifice into a vacuum. Under the same conditions, It required 18 seconds for the same number of moles of oxygen to effuse. Find the molecular mass of the unknown gas.
Answer: A vacuum. Under the same conditions 16 s were required for the same number of moles of O2 to effuse. ... The molar mass of the unknown gas is 200 g/mol. calculation ... QUESTION 1 If gas-burning appliances are vented into an unlined masonry chimney, deteriorate and crumble and may · PLS HELP
Explanation:
how would you separate the components in a mixture of chlorine and hydrogen gas