Answer:
The pressure increases by a factor of 1.27
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 100 °C
Final temperature (T₂) = 200 °C
Initial pressure (P₁) = P
Final pressure (P₂) =?
NOTE: The volume is constant.
Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 100 °C
Initial temperature (T₁) = 100 °C + 273
Initial temperature (T₁) = 373 K
Final temperature (T₂) = 200 °C
Final temperature (T₂) = 200 °C + 273
Final temperature (T₂) = 473 K
Next, we shall determine the final pressure of the gas. This can be obtained as follow:
Initial temperature (T₁) = 373 K
Final temperature (T₂) = 473 K
Initial pressure (P₁) = P
Final pressure (P₂) =?
P₁ / T₁ = P₂ / T₂
P / 373 = P₂ / 473
Cross multiply
373 × P₂ = P × 473
Divide both side by 373
P₂ = P × 473 / 373
P₂ = 1.27 × P
Finally, we shall determine the factor by which the pressure of the gas increase as follow:
Initial pressure (P₁) = P
Final pressure (P₂) = 1.27 × P
From the above, we can see that the pressure increased by a factor of 1.27
The gas pressure would increase by a factor of 2.
At constant volume, the pressure of a gas increases with an increase in its temperature.
Mathematically; P1/T1 = P2/T2 Where P1 = initial pressure, T1 = initial temperature, P2 = final pressure, and T2 = final temperature.In this case, T1 = 100 and T2 = 200
P2/P1 = T2/T1= 200/100
= 2
This means that the gas pressure would increase by a factor of 2 if the temperature were to be increased from 100 to 200 at constant volume.
More on gas laws can be found here: https://brainly.com/question/1190311?referrer=searchResults
Which gas is most abundant in Earth’s atmosphere?
Answer:
nitrogen
Explanation:
The atmosphere contains many gases, most in small amounts, including some pollutants and greenhouse gases. The most abundant gas in the atmosphere is nitrogen, with oxygen second. Argon, an inert gas, is the third most abundant gas in the atmosphere. Why do I care?
nitrogen is the most abundant gas in the atmosphere
how does mixture relate to life
Answer:
For example, when we bake a cake, it's a result of a mixture of eggs, flour, sugar, and other ingredients. Any time two or more items are combined, a mixture is formed. Sometimes, the different parts of a mixture can be separated into individual entities. Other times, they're married for as long as they exist.
Explanation:
How many atoms make 3.42 moles of zinc (Zn)?
O 2.06 x 1024
65.38
1.76 x 1023
O 6.02 x 1023
Answer:
To obtain one mole of copper atoms (6.02 x 1023 atoms), ... mol Ag? (b) How many atoms of Ag are in 0.0342 mol Ag? 7 ... contain one S atom and two O atoms; calculate its molar mass.
In a lab, you produce a quantity of the radioactive isotope thorium-234. Over the course of several weeks, the unstable isotope decays, and you measure the amount of thorium-234 remaining in the sample. You obtain the following data. What is the half life of Thorium-234? How much Thorium 234 will there be after two half lives?
Days Elapsed Grams of Thorium 234 Remaining
0 16
12 11
24 8
36 6
a. 36 days
b. 12 days
c. 24 days / 4 grams
Answer:
Option C. 24 days / 4 grams
Explanation:
From the question given above, the following data were obtained:
Days Elapsed >>>> Mass Remaining
0 >>>>>>>>>>>>>>> 16
12 >>>>>>>>>>>>>>> 11
24 >>>>>>>>>>>>>>> 8
36 >>>>>>>>>>>>>>> 6
A. Determination of the half-life of Thorium-234.
To determine the half-life, it is important to know the definition of half life.
Half-life is defined as the time taken for a substance to reduce to half its original mass.
From the table given above, we can see that the original mass of the isotope is 16 g (i.e at 0 day). By day 24, the mass of the isotope is 8 g (i.e half the original mass). Thus, the half-life of the isotope is 24 days.
B. Determination of the mass of the isotope remaining after 2 half lives.
Original amount (N₀) = 16 g
Number of half-lives (n) = 2
Amount remaining (N) =?
N = 1/2ⁿ × N₀
N = 1/2² × 16
N = 1/4 × 16
N = 4 g
Thus, 4 g of the isotope is remaining after 2 half lives.
Summay:
Half-life = 24 days
Amount remaining after 2 half-lives = 4 g
Option C gives the correct answer to the question.
The wavelength of green light from a traffic signal is centered at 5.20 x 10-7 m.
Calculate the frequency.
Answer: 5.77 * 10¹⁴s⁻¹
Explanation:
Speed = Frequency * Wavelength
Frequency = Speed/ Wavelength
Speed of light = 3 * 10⁸ m/s
Frequency = (3 * 10⁸ m/s) / (5.20 x 10⁻⁷m)
= 5.77 * 10¹⁴hz
= 5.77 * 10¹⁴s⁻¹
can u pls help me with this question
Answer:
it's mass
Explanation:
just trust me it's just mass
Identify the most acidic hydrogens in each of the following molecules. Give the structure of the enolate ion arising from deprotonation. (a) Acetaldehyde; (b) propanal; (c) acetone; (d) 4-heptanone; (e) cyclopentanone.
Answer:
See explanation below (Brainlist please)
Explanation:
First of all, we need to understand what is an acidic hydrogen.
An acidic hydrogen, is the atom of hydrogen which is more propense to undergo an acid base reaction, and form a stable ion or molecule in the process.
In other words, is the hydrogen that is more vulnerable to get substracted in an acid base reaction to form another compound.
Knowing this information, gives us an idea of how a molecule can be formed and which kind of compound is formed.
Now, in this question, we have 5 molecules. Each of them is either a ketone or aldehyde, so this mean that we have the carbonile group (C = O), which means that is easier to identify the acidic hydrogen. This is because the Carbonile group is an attractor group, so, it will attract the charges by inductive effect (in some cases by resonance), and the molecule is more stable.
This can be shown by drawing the enolate ion that is formed once the molecule undergo the acid base reaction. As it's an enolate form that we are looking for, then it means that the ketone or aldehyde is undergoing an electrofilic attack with a base. This base will substract the most acidic hydrogen to form a better and stable enolate. The acidic hydrogen and the enolate form can be seen in the attached picture.
a) In the case of acetaldehyde, the most acidic will be the hydrogen of carbon 2, because the hydrogen from the carbonile, once it's substracted, the charge of the carbon cannot be stabilized by resonance. Carbon 2 hydrogens, can do this job easily.
b) Propanal happens something similar to acetaldehyde, the terminal hydrogen cannot be substracted, and carbon 3, once the hydrogen is gone, the negative charge cannot be stabilized by resonance, so hydrogens of carbon 2 can do this.
c) in the case of acetone, is easier to look because we only have the C = O between two methyl group, so you can use either carbon 1 or 3 to do the job.
d) 4 heptanone the most acidic hydrogen would be carbon 3 or 5, because they are closer to the C=O and the ion can be stabilized by resonance.
e) Finally in ciclopentanone, the most acidic hydrogen would be carbon 2 or 5.
See picture for a better understanding.
Hope it helps.
2055 Q. No. 10^-2
mole of KOH is dissolved in 10 litres of
water. What will be the pH of the solution?
12
Ans: pH = 11
Answer:
11
Explanation:
Moles of KOH = [tex]10^{-2}[/tex]
Volume of water = 10 liters
Concentration of KOH is given by
[tex][KOH]=\dfrac{10^{-2}}{10}\\\Rightarrow [KOH]=10^{-3}\ \text{M}[/tex]
[tex][KOH][/tex] is strong base so we have the following relation
[tex][KOH]=[OH^{-}]=10^{-3}\ \text{M}[/tex]
[tex]pOH=-\log [OH^{-}]=-\log10^{-3}[/tex]
[tex]\Rightarrow pH=14-3=11[/tex]
So, pH of the solution is 11
What is the mass of 8.50 × 1022 molecules of NH3?
Answer:
The mass of 8.50 × 10²² NH₃ molecules is ≈ 1.84 g.
One mole of a molecule contains 6.02 × 10²³ molecules. The mass of 8.50 × 10²² molecules of NH₃ is 2.39 g.
What is ammonia (NH3)?Ammonia is an inorganic compound formed by hydrogen and nitrogen. Ammonia exists in gaseous state.
One mole of every element or compound contains 6.02 × 10²³ molecules. This number is called Avogadro number. The molar mass of ammonia is 17 g/l
It is given that the number of molecules of ammonia here, is 8.50 × 10²².
The no.of moles of ammonia = 8.50 × 10²²/ 6.02 × 10²³
= 0.141 moles.
If one mole ammonia is 17 g/l, the mass of 0.141 moles of NH₃ is calculated as follows: 0.141 × 17 = 2.39 g. Hence the mass of NH3 which contains 8.50 × 10²² molecules is 2.39 g.
To learn more about ammonia, find the link below:
https://brainly.com/question/14672082
#SPJ2
Can you please help me it’s due at 3:00 please hurry whoever answers this correct I will mark brainliest
PLEASE ANSWER!!! I WILL GIVE POINTS AND BRAINLIEST IF YOU ANSWER CORRECTLY!!! PLEASE DO IT BECAUSE ITS DUE TODAY!!!
Answer:
7 sublimation
8 freezing
9 melting
10 condensation
11 evaporation
Explanation:
Calculate the following:
1. Mass of 4.3x10-3 mol of lead
2. Mass of 3.8x1022 antimony atoms
3. Number of atoms in 15.5 kg of tungsten
Answer:
1) Mass = 890.96 g
2) Mass = 7.67 g
3) 507.65 ×10²³ atoms
Explanation:
1) Given data:
Number of moles of lead = 4.3×10⁻³ mol
Mass of lead = ?
Solution:
Mass = number of moles × molar mass
Molar mass of lead = 207.2 g/mol
by putting values,
Mass = 4.3×10⁻³ mol × 207.2 g/mol
Mass = 890.96 g
2) Given data:
Number of atoms of antimony = 3.8×10²² atoms
Mass of antimony = ?
Solution:
1 mole contain 6.022 ×10²³ atoms
3.8×10²² atoms × 1 mol / 6.022 ×10²³ atoms
0.63×10⁻¹ mol
0.063 mol
Mass:
Mass = number of moles × molar mass
Molar mass of lead = 121.76 g/mol
Mass = 0.063 mol × 121.76 g/mol
Mass = 7.67 g
3) Given data:
Mass of tungsten = 15.5 Kg (15.5 kg × 1000 g/ 1kg = 15500 g)
Number of atoms = ?
Solution:
Number of moles of tungsten:
Number of moles = mass/molar mass
Number of moles = 15500 g / 183.84 g/mol
Number of moles = 84.3 mol
1 mole contain 6.022 ×10²³ atoms
84.3 mol × 6.022 ×10²³ atoms / 1mol
507.65 ×10²³ atoms
Question 4 (1 point)
60.5 mL of 0.223 M HI is mixed with 86.0 mL of a buffer system composed of 0.385 M sodium acetate and 0.410 M acetic acid. Find the pH of
the final solution
Ko of acetic acid = 1.8 E-5
4561
o a
Ob
Ос
Od
4.673
4.450
4.349
Answer:
pH = 4.349
Explanation:
When HI is added to sodium acetate, CH3COONa, acetic acid is produced as follows:
CH3COONa + HI → CH3COOH + NaI
That means the moles of HI added are the moles of acetic acid produced and the moles of sodium acetate consumed.
Moles of HI:
0.0605L * (0.223mol/L) = 0.01349mol
To find pH of the buffer (Mixture of weak acid, acetic acid, and conjugate base, sodium acetate) we need to solve H-H euation:
pH = pKa + log [CH3COONa] / [CH3COOH]
Where pKa is -log of Ka of the acid: -log1.8x10⁻⁵ = 4.745
And [] could be taken as moles of each specie
Moles CH3COONa:
Inital moles: 0.086L * (0.385mol/L) = 0.03311
Final moles: 0.03311mol - 0.01349mol = 0.01962mol CH3COONa
Moles CH3COOH:
Inital moles: 0.086L * (0.410mol/L) = 0.03256
Final moles: 0.03256mol + 0.01349mol = 0.04875mol CH3COOH
pH = 4.745+ log [0.01962mol CH3COONa] / [0.04875mol CH3COOH]
pH = 4.3497
Rigth answer is:
4.349
What are some ways to prevent heat energy loss in matter?
Answer:
Use less heat in your house.
Explanation:
You have blankets in your house, huddle up for a good movie together.
Answer:
Simple ways to reduce heat loss include
Heat loss through windows can be reduced by using double glazing
Heat loss through walls can be reduced using cavity wall insulation
Heat loss through the roof can be reduced by laying loft insulation
Explanation:
when aqueous solutions of sodium hypochlorite and nitric acid are mixed, an aqueous solution of sodium nitrate and hypochlorous acid results. Write the net ionic equation for the reaction.
Answer:
H+ (aq) + ClO- (aq) ---> HClO(aq)
Explanation:
The net ionic reaction equation is a chemical equation that explicitly shows only the particular ions that undergo a chemical change in the course of a given reaction.
In this particular reaction, the molecular reaction equation is shown as follows;
HNO3(aq) + NaOCl(aq) -----------> NaNO3(aq) + HOCl(aq)
Ionically;
H+ (aq) + ClO- (aq) ---> HClO(aq)
During the process of condensation, water vapor:____________.
(1) releases 334 J/g of heat energy
(2) releases 2260 J/g of heat energy
(3) gains 334 J/g of heat energy
(4) gains 2260 J/g of heat energy
Answer: (2) releases 2260 J/g of heat energy
Explanation:
Latent heat of vaporization is the amount of heat required to convert 1 mole of liquid to gas at atmospheric pressure.
Latent heat of condensation is energy released when 1 mole of vapor condenses to form liquid droplets.
The temperature does not change during this process, so heat released goes into changing the state of the substance, thus it is called latent which means hidden. The energy released in this process is same in magnitude as latent heat of vaporization. The heat of condensation of water vapour is about 2,260 J/g.
Phase transition refers to the changes in the states of matter between gas, liquids, and solids.
The correct answer is:
Option 2. releases 2260 J/g of heat energy
The process can be explained as:
1. Condensation is the process of conversion of water vapor into the liquid state.
2. Latent heat of vaporization is defined as the amount of heat required for 1 mole of liquid to convert into a gaseous phase at atmospheric pressure.
3. The change in the temperature does not occur during the condensation, and the heat required for the phase transition is latent heat. The heat of condensation of water vapor is 2,260 J/g.
Thus, the correct answer is Option 2.
To know more about condensation, refer to the following link:
https://brainly.com/question/15563071
How many atoms are there in 4430 grams of lithium (Li)?
Answer:
3843.96 × 10²³ atoms
Explanation:
Given data:
Mass of Li = 4430 g
Number of atoms = ?
Solution:
We will calculate the number of moles first.
Number of moles =mass/molar mass
Number of moles = 4430 g/ 6.94 g/mol
Number of moles = 638.32 mol
1 mole contain 6.022 × 10²³ atoms
638.32 mol × 6.022 × 10²³ atoms / 1 mol
3843.96 × 10²³ atoms
At a given set of conditions 241.8 kJ of heat is released when one mole of H2O forms from its elements. Under the same conditions 285.8 KJ is released when one mole of H2O is formed from its elements. Find Delta h of the vaporization of water at these conditions
Answer:
44Kj
Explanation:
These are the equations for the reaction described in the question,
Vaporization which can be defined as transition of substance from liquid phase to vapor
H2(g)+ 1/2 O2(g) ------>H2O(g). Δ H
-241.8kj -------eqn(1)
H2(g)+ 1/2 O2(g) ------>H2O(l).
Δ H =285.8kj ---------eqn(2)
But from the second equation we can see that it moves from gas to liquid, we we rewrite the equation for vaporization of water as
H2O(l) ------>>H2O(g)---------------eqn(3)
But the equation from eqn(2) the eqn does go with vaporization so we can re- write as
H2O ------> H2(g)+ 1/2 O2(g)
Δ H= 285.8kj ---------------eqn(4)
To find Delta h of the vaporization of water at these conditions, we sum up eqn(1) and eqn(4)
Δ H=285.8kj +(-241.8kj)= 44kj
What is one way a pathogen can enter the body?
Question 3 options:
Nose
Broken Skin
Mouth
All of the above
A mole of a substance has a mass in grams that is equal to the molecular mass. For example, a carbon atom has a mass of 12.01 u. A mole of carbon has a mass of 12.01 g. Based on their molar masses, list the GFM of each substance.
Answer:
hello your question is incomplete attached below is the complete question
answer :
Fe2O3 = 159 g/mol
CO = 28.01 g/mol
Fe = 55.85 g/mol
CO2 = 44.01 g/mol
Explanation:
Molar mass for Fe2O3Fe = 55.85 g/mol
O = 16.0 g/mol
hence the molar mass of Fe2O3 = 2(55.85) + 3(16) = 159 g/mol
Molar mass for COC = 12.01 g/mol
O = 16.0 g/mol
hence the molar mass of CO = 28.01 g/mol
Molar mass for FeFe = 55.85 g/mol
Molar mass for CO2C = 12.01 g/mol
O = 16.0 g/mol
hence the molar mass of CO2 = 12.01 + 2(16) = 44.01 g/mol
Answer:
There ya go ;)
Explanation:
What is the answer to this?
Please help me ASAP I’ll mark Brainly
Answer:
Batteries hold chemical energy
Explanation:
The battery acid in a battery leads to chemical energy.
can u pls help me with this question
Answer:
B
Explanation:
When a thermometer measures the temperature of a substance what is it actually measuring?
Please help me thanks so much....I’ll mark you?!?!:))))
Answer:
Extreme heat
Explanation:
Because when matter is heated up The molecules move faster.
Answer:
I think it's extreme heat
Nitrogen can exist as a solid, a liquid, or a gas. Which of the following lists the
phases of nitrogen in order of increasing density?
1. liquid, gas, solid
2. gas, liquid, solid
3. gas, solid, liquid
4. solid, liquid, gas
The phases of nitrogen in order of increasing density is solid, liquid, and gas.
Nitrogen is known to be odorless and colorless. Nitrogen makes up about 78% of the gases that we've in the atmosphere. It has an atomic number of 7 and is represented with the symbol N.It should be noted that nitrogen can be a solid, a liquid or a gas. When nitrogen is at ordinary pressure, it is known to be a gas. In a case whereby nitrogen is below 77°K, then it's a liquid and it's a solid when it's below 63°K.The density explains the mass per unit volume that nitrogen has when it's either at gaseous, solid or liquid state. It should be noted that the highest density is at its gaseous state.Therefore, the phases of nitrogen in order of increasing density will then be solid, liquid, and gas.In conclusion, the correct option is D.
Read related link on:
https://brainly.com/question/24615770
Element X has two naturally occurring isotopes, 65X (isotopic mass 65.0457 amu, abundance 20.53%) and 67X (isotopic mass 66.9704 amu, abundance 79.47%). Calculate the atomic mass of element X.
Answer:
66.5753 amu
Explanation:
From the question given above, the following data were obtained:
Isotope A (⁶⁵X):
Mass of A = 65.0457 amu
Abundance of A = 20.53%
Isotope B (⁶⁷X):
Mass of B = 66.9704 amu
Abundance of B = 79.47%
Atomic mass of X =?
The atomic mass of X can be obtained as follow:
Atomic mass = [(mass of A × A%)/100] + [(mass of B × B%)/100]
= [(65.0457 × 20.53)/100] + [(66.9704 × 79.47)/100]
= 13.3539 + 53.2214
= 66.5753 amu
Therefore, the atomic mass of X is 66.5753 amu.
Element X, with an atomic mass of 66.58 amu, has 2 naturally occurring isotopes, ⁶⁵X (65.0457 amu, 20.53%) and ⁶⁷X (66.9704 amu, 79.47%).
What is the average atomic mass?The average atomic mass (atomic mass) of an element is the sum of the masses of its isotopes, each multiplied by its natural abundance.
Element X has 2 isotopes:
⁶⁵X with an isotopic mass of 65.0457 amu and an abundance of 20.53% (0.2053).⁶⁷X with an isotopic mass of 66.9704 amu and an abundance of 79.47% (0.7947).We can calculate the average atomic mass of X using the following expression.
mX = m⁶⁵X × ab⁶⁵X + m⁶⁷X × ab⁶⁷X
mX = 65.0457 amu × 0.2053 + 66.9704 amu × 0.7947
mX = 66.58 amu
Element X, with an atomic mass of 66.58 amu, has 2 naturally occurring isotopes, ⁶⁵X (65.0457 amu, 20.53%) and ⁶⁷X (66.9704 amu, 79.47%).
Learn more about atomic mass here: https://brainly.com/question/6200158
What is the velocity of a plane to travel 3000 miles from New York to California in 4.5 hours
Answer:
[tex]velocity = \frac{displacement}{time} \\ v = \frac{3000}{4.5} \\ v = 666.67 \: miles \: per \: hour \\ or \\ v = 666 \frac{2}{3} \: miles \: per \: hour[/tex]
The density of gold is 19.3 g/cm³. Which of the following shows the mass of a gold bar that is 4.50 cm × 8.00 cm × 20.00 cm?
Answer:
13896g
Explanation:
volume = 4.50×8.00×20.00 = 720 cm³
mass = density × volume
mass= 19.3 × 720 = 13896g
Calculate the molar mass of adrenaline (C9H13NO3C9H13NO3), a hormone responsible for regulating heart rate and other functions of the sympathetic nervous system. Express your answer to five significant figures.
Answer:
[tex]M_{C_9H_{13}NO_3}=183.23g/mol[/tex]
Explanation:
Hello!
In this case, since the molar mass of a chemical compound is computed by averaging the atomic mass of each element in the molecule and the amount of atoms; which in this case there are 9 carbon atoms, 13 hydrogen atoms, 1 nitrogen atom and 3 oxygen atoms; thus, we compute the average as shown below:
[tex]M_{C_9H_{13}NO_3}=m_C*9+m_H*13+m_N+m_O*3[/tex]
Now, we plug in the atomic masses to obtain:
[tex]M_{C_9H_{13}NO_3}=12.01*9+1.01*13+14.01+16.00*3\\\\M_{C_9H_{13}NO_3}=183.23g/mol[/tex]
Best regards!