The relationship between the Period (T) caused by the oscillation of the mass on the end of a hanging spring and the mass (m) is:

Answer:

(C). The line integral of the magnetic field around a closed loop

Explanation:

Faraday's law states that induced emf is directly proportional to the time rate of change of magnetic flux.

This can be written mathematically as;

[tex]EMF = -\frac{\delta \phi _B}{\delta t}[/tex]

[tex](\frac{\delta \phi _B}{\delta t} )[/tex] is the rate of change of the magnetic flux through a surface bounded by the loop.

ΔФ = BA

where;

ΔФ is change in flux

B is the magnetic field

A is the area of the loop

Thus, according to Faraday's law of electric generators

∫BdL = [tex]\frac{\delta \phi _B}{\delta t}[/tex] = EMF

Therefore, the line integral of the magnetic field around a closed loop is equal to the negative of the rate of change of the magnetic flux through the area enclosed by the loop.

The correct option is "C"

(C). The line integral of the magnetic field around a closed loop

Faraday's Law states that the negative of the time rate of change of the flux of the magnetic field through a surface is equal to: D. The flux of the electric field through a surface which has the loop as its boundary.

In Physics, the surface integral with respect to the normal component of a magnetic field over a surface is the magnetic flux through that surface and it is typically denoted by the symbol [tex]\phi[/tex].

Faraday's Law states that the negative of the time rate of change ([tex]\Delta t)[/tex] of the flux of the magnetic field ([tex]\phi[/tex]) through a surface is directly proportional to the flux ([tex]\phi[/tex]) of the electric field through a surface which has the loop as its boundary.

Mathematically, Faraday's Law is given by the formula:

[tex]E.m.f = -N\frac{\Delta \phi}{\Delta t}[/tex]

Where:

Read more: https://brainly.com/question/15121836

Answer:

Explanation:

From,

1cm = [tex]10^{-2}m[/tex]

1mm = [tex]10^{-3}m[/tex]

1nanometer = [tex]10^{-9[/tex]

1micrometer = [tex]10^{-6[/tex]

Therefore,

A) [tex]10^0[/tex] meters = 1meter

B) [tex]10^2[/tex] cm = [tex]10^2 * 10^{-2} = 1meter[/tex]

C) [tex]10^4[/tex] mm = [tex]10^4 * 10^{-3} = 10meter[/tex]

D) [tex]10^5[/tex] micrometer = [tex]10^5 * 10^{-6} = 0.1meter[/tex]

E) [tex]10[/tex] nanometer = [tex]10 * 10^-9 = 1*10^{-8}[/tex]

Therefore 10nanometers is the shortest length

For more information on length conversions, visit

https://brainly.com/subject/physics

Answer:

Their frequency is 111.22 Hz

Explanation:

Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration and is expressed in units of length (m).

Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).

The propagation speed of a wave is the quantity that measures the speed at which the wave's disturbance propagates throughout its displacement. The speed at which the wave propagates depends on both the type of wave and the medium through which it propagates. Relate wavelength (λ) and frequency (f) inversely proportional using the following equation:

v = f * λ.

Then the frequency can be calculated as: f=v÷λ

In this case:

Replacing:

[tex]f=\frac{3.37 \frac{m}{s} }{0.0303 m}[/tex]

Solving:

f=111.22 Hz

Their frequency is 111.22 Hz

Answer:

less than

Explanation:

The force of kinetic friction for a particular pair of interacting objects is always less than the force of static friction.

The force of static friction between two surfaces is always higher than the force of kinetic friction.

Answer:

The moment of inertia is  [tex]I =0.14 \ kg \cdot m^2[/tex]

Explanation:

From the question we are told that

    The length of the rod is  [tex]l = 0.900 \ m[/tex]

     The mass of the rod is  [tex]m = 0.500 \ kg[/tex]

      The distance of the center of mass from the pivot is  [tex]d = 0.500 \ m[/tex]

      The period of the rod's motion is  [tex]T = 1.49 \ s[/tex]

Generally the period of the motion is mathematically represented as

       [tex]T = 2 \pi * \sqrt{\frac{I}{m* g * d} }[/tex]

Where [tex]I[/tex] is the moment of inertia about the pivot so making [tex]I[/tex] the subject of formula

      [tex]I = [\frac{T}{2\pi } ]^2 * m * g * d[/tex]

substituting values

        [tex]I = [\frac{1.49}{2* 3.142 } ]^2 * 0.5 * 9.8 * 0.5[/tex]

       [tex]I =0.14 \ kg \cdot m^2[/tex]

Answer:

The amplitude of the oscillation is 2.82 cm

Explanation:

Given;

mass of attached block, m = 4.1 kg

energy of the stretched spring, E = 3.8 J

period of oscillation, T = 0.13 s

First, determine the spring constant, k;

[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]

where;

T is the period oscillation

m is mass of the spring

k is the spring constant

[tex]T = 2\pi \sqrt{\frac{m}{k} } \\\\k = \frac{m*4\pi ^2}{T^2} \\\\k = \frac{4.1*4*(3.142^2)}{(0.13^2)} \\\\k = 9580.088 \ N/m\\\\[/tex]

Now, determine the amplitude of oscillation, A;

[tex]E = \frac{1}{2} kA^2[/tex]

where;

E is the energy of the spring

k is the spring constant

A is the amplitude of the oscillation

[tex]E = \frac{1}{2} kA^2\\\\2E = kA^2\\\\A^2 = \frac{2E}{k} \\\\A = \sqrt{\frac{2E}{k} } \\\\A = \sqrt{\frac{2*3.8}{9580.088} }\\\\A = 0.0282 \ m\\\\A = 2.82 \ cm[/tex]

Therefore, the amplitude of the oscillation is 2.82 cm

Answer:

The magnetic field at mid point between two parallel wires is 1.2 x 10⁻⁵ T

Explanation:

Given;

current in the first wire, I₁ = 10 A

current in the second wire, I₂ = 20 A

distance between the two wires, d = 1.0 m

Magnetic field at mid point between two parallel wires is calculated as;

[tex]B = \frac{\mu_o I_1}{2\pi r} + \frac{\mu_o I_2}{2\pi r} \\\\B = \frac{\mu_o }{2\pi r}(I_1 +I_2)[/tex]

where;

r is the midpoint between the wires, = 0.5 m

μ₀ is the permeability of free space, = 4π x 10⁻⁷

[tex]B = \frac{\mu_o }{2\pi r}(I_1 +I_2)\\\\B = \frac{4\pi*10^{-7} }{2\pi *0.5}(10 +20)\\\\B = \frac{4\pi*10^{-7} *30}{2\pi *0.5}\\\\B = 1.2 *10^{-5} \ T[/tex]

Therefore, the magnetic field at mid point between two parallel wires is 1.2 x 10⁻⁵ T

Answer:

The air-water interface is an example of boundary. The transmitted portion of the initial wave energy is way smaller than the reflected portion. This makes the boundary  wave hard to hear.

When both the source of the sound and your ears are located underwater, the sound is louder because the sound waves can travel directly to your ear.

Explanation:

The air-to-water sound wave transmission is inhibited because more of reflection than transmission of the wave occurs at the boundary. In the end, only about 30% of the sound wave eventually reaches underwater. For sound generated underwater, all the wave energy is transmitted directly to the observer. Sound wave travel faster in water than in air because, the molecules of water are more densely packed together, and hence can easily transmit their vibration to their neighboring molecules, when compared to air.

Answer: The air-water interface is an example of boundary. The (transmitted) portion of the initial wave is way smaller than the (reflected) portion. This makes the (transmitted) wave hard to hear.

When both the source of the sound and your ears are located underwater, the sound is louder because the sound waves can (travel directly to your ears.)

Explanation:

The part of the sound wave that is transmitted across the boundary between air and water is much smaller than the part of the wave that is reflected. This is what makes it hard to hear your friend knocking two rocks together above the surface.

When you and the rocks are underwater, the sound that comes from knocking the rocks together can travel directly to your ears rather than having to be transmitted across mediums.

Answer:

1.007 × 10^(10) electron

Explanation:

We are given;

Electric Field;E = 1450 N/C

Diameter;d = 20 cm = 0.2 m

So, Radius: r = 0.2/2 = 0.1 m

Formula for Electric field just outside the sphere is given by the formula;

E = kq/r²

Where;

E is the magnitude of the electric field. q is the magnitude of the point charge r is distance from the point charge

k is a constant with a value of 9 x 10^(9) N.m²/C²

Making q the subject, we have;

q = Er²/k

Thus,

q = 1450 × 0.1²/(9 × 10^(9))

q = 1.61 × 10^(-9) C

Now, total charge q is also given by the formula;

q = Ne

Where;

e is charge on electron which is 1.6 × 10^(-19)

N is number of excess electrons

Making N the formula, we have;

N = q/e

N = (1.61 × 10^(-9))/(1.6 × 10^(-19))

N = 1.007 × 10^(10) electron

Answer:

17.94 kN/C is the electric field intensity at the origin due to the charges.

Explanation:

From the question, we are told that

The distance of 1 μC from origin = 1 m

The distance of 2 μC from origin = 2 m

The distance of 3 μC from origin = 3 m

The distance of 4 μC from origin = 5 m

Therefore, for us to find the electric field intensity, we'll solve below:

The formula for Electric field intensity = ( k * q ) / ( r * r )

where , r is distance ,

k = 9 * 10^9 ,

and , q is charge .

now ,

electric field intensity at the origin = [ k * 10^(-6) / 1 * 1 ] +[ k * 2 * 10^(-6) / 2 * 2 ] + [ k * 3 * 10^(-6) / 3 * 3 ] + [ k * 4 * 10^(-6) / 5 * 5 ]

=> electric field intensity at the origin = k * 10^(-6) [ 1 + 1/2 + 1/3 + 4/25 ] N/C

=> electric field intensity at the origin = 9 * 10^9 * 10^(-6) * 1.99 N/C

=> electric field intensity at the origin = 17.94 kN/C

Answer:

m = 0.0125 kg

Explanation:

Let us apply the formula for the speed of a wave on a string that is under tension:

[tex]v = \sqrt{\frac{F}{\mu} }[/tex]

where F = tension force

μ = mass per unit length

Mass per unit length is given as:

μ  = m / l

where m = mass of the string

l = length of the string

This implies that:

[tex]v = \sqrt{\frac{F}{m/l} }\\ \\v = \sqrt{\frac{F * l}{m} }[/tex]

Let us make mass, m, the subject of the formula:

[tex]v^2 = \frac{F * l}{m}\\\\m = \frac{F * l}{v^2}[/tex]

From the question:

F = 20 N

l = 4.50 m

v = 85 m/s

Therefore:

[tex]m = \frac{20 * 4.5}{85^2}\\\\m = \frac{90}{7225}\\ \\m = 0.0125 kg[/tex]

━━━━━━━☆☆━━━━━━━

▹ Answer

B. Anxiety

▹ Step-by-Step Explanation

Anxiety isn't a behavior since it's a feeling. Behavior and feeling are different things therefore, anxiety is the correct answer.

Hope this helps!

- CloutAnswers ❁

Brainliest is greatly appreciated!

━━━━━━━☆☆━━━━━━━

Eating, sleeping, and crying all are considered as behaviors. However, anxiety cannot be considered as a behavior because it is a feeling. Thus, the correct option is B.

Anxiety is an intense feeling of excessive, and persistent worry and the fear about everyday situations. This includes fast heart rate, rapid breathing, sweating, and feeling tired constantly may occur.

Behavior is the range of actions and mannerisms which are made by individuals, organisms, systems or the artificial entities in some environment. These systems can include other systems or organisms as well as the inanimate physical environment. Behaviors include eating, sleeping, and crying. Anxiety is not a behavior, it is a feeling.

Therefore, the correct option is B.

Learn more about Anxiety here:

https://brainly.com/question/28481974

#SPJ5

Answer:

large

Explanation:

Cumulus clouds is a term in metrology that defines the type of clouds which are characterized by its low altitude, puffy appearance, and fair-weather nature. They are generally considered as low-level clouds, with less than than 2,000m in altitude except they are the more vertical cumulus congestus form.

Thus, it can be noted that, the difference between the surface dew point temperature and the surface temperature is related to relative humidity. Hence, in a situation when there is a LARGE difference between the surface temperature and the surface dewpoint temperature, then the relative humidity is very low (e.g., 10%).

Therefore, the bases of developing convective cumulus clouds will be relatively higher at a location with a relatively LARGE difference between the surface temperature and surface dew point temperature.

Answer:

A

Explanation:

since the wooden bat is an opaque object placed after a translucent object, light will come through the plastic sheet but will be unable to go through the bat. hence the dark shadow of the bat on a lit sheet

Answer:

30.67m

Explanation:

Using one of the equations of motion as follows, we can describe the path of the projectile in its horizontal or vertical displacement;

s = ut ± [tex]\frac{1}{2} at^2[/tex]               ------------(i)

Where;

s = horizontal/vertical displacement

u = initial horizontal/vertical component of the velocity

a = acceleration of the projectile

t = time taken for the projectile to reach a certain horizontal or vertical position.

Since the question requires that we find the vertical distance from where the projectile was launched to where it hit the target, equation (i) can be made more specific as follows;

h = vt ± [tex]\frac{1}{2} at^2[/tex]               ------------(ii)

Where;

h = vertical displacement

v = initial vertical component of the velocity = usinθ

a = acceleration due to gravity (since vertical motion is considered)

t = time taken for the projectile to hit the target

From the question;

u = 47m/s, θ = 0.6rads

=> usinθ = 47 sin 0.6

=> usinθ = 47 x 0.5646 = 26.54m/s

t = 1.7s

Take a = -g = -10.0m/s   (since motion is upwards against gravity)

Substitute these values into equation (ii) as follows;

h = vt - [tex]\frac{1}{2} at^2[/tex]

h = 26.54(1.7) - [tex]\frac{1}{2} (10)(1.7)^2[/tex]

h = 45.118 - 14.45

h = 30.67m

Therefore, the vertical distance is 30.67m        

Answer:

The excess charge is [tex]Q = 3.5 *10^{-7} \ C[/tex]

Explanation:

From the question we are told that

      The diameter is [tex]d = 45 \ cm = 0.45 \ m[/tex]

       The potential of the surface is [tex]V = 14 \ kV = 14 *10^{3} \ V[/tex]

The radius of the sphere is  

           [tex]r = \frac{d}{2}[/tex]

substituting values

          [tex]r = \frac{0.45}{2}[/tex]

         [tex]r = 0.225 \ m[/tex]

The potential on the surface is mathematically represented as  

          [tex]V = \frac{k * Q }{r }[/tex]

Where k is coulomb's constant with value  [tex]k = 9*10^{9} \ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}.[/tex]

  given from the question that there is no other charge the Q is the excess charge  

Thus  

        [tex]Q = \frac{V* r}{ k}[/tex]

substituting values

        [tex]Q = \frac{14 *10^{3} 0.225}{ 9*10^9}[/tex]

        [tex]Q = 3.5 *10^{-7} \ C[/tex]

Answer:

200volts

Explanation:

Pls see attached file

Answer:

100 V

Explanation:

Electric field E = 100 V/m

Potential at the origin = 300 V

Potential at point (-2m, 0) i.e 2 m behind the origin = ?

From the equation ΔV = EΔd,

ΔV = [tex]V_{0} - V_{x}[/tex]

where [tex]V_{0}[/tex] is the potential at origin,

and [tex]V_{x}[/tex] is the potential at point (-2, 0)

E = electric field

Δd = 0 - (-2) = 2 m

[tex]V_{0} - V_{x}[/tex] = 300 - [tex]x[/tex]

equating, we have

 300 - [tex]x[/tex] = 100 x 2

300 - [tex]x[/tex] = 200

[tex]x[/tex] = 100 V

Answer:

the resistance of the longer one is twice as big as the resistance of the shorter one.

Explanation:

Given that :

For the shorter cylindrical resistor

Length = L

Diameter = D

Resistance = R1

For the longer cylindrical resistor

Length = 8L

Diameter = 4D

Resistance = R2

So;

We all know that the resistance of a given material can be determined by using the formula :

[tex]R = \dfrac{\rho L }{A}[/tex]

where;

A = πr²

[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]

For the shorter cylindrical resistor ; we have:

[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]

since 2 r = D

[tex]R = \dfrac{\rho L }{\pi (\frac{2}{2 \ r}) ^2}[/tex]

[tex]R = \dfrac{ 4 \rho L }{\pi \ D ^2}[/tex]

For the longer cylindrical resistor ; we have:

[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]

since 2 r = D

[tex]R = \dfrac{ \rho (8 ) L }{\pi (\frac{2}{2 \ r}) ^2}[/tex]

[tex]R = \dfrac{32\rho L }{\pi \ (4 D) ^2}[/tex]

[tex]R = \dfrac{2\rho L }{\pi \ (D) ^2}[/tex]

Sp;we can equate the shorter cylindrical resistor to the longer cylindrical resistor as shown below :

[tex]\dfrac{R_s}{R_L} = \dfrac{ \dfrac{ 4 \rho L }{\pi \ D ^2}}{ \dfrac{2\rho L }{\pi \ (D) ^2}}[/tex]

[tex]\dfrac{R_s}{R_L} ={ \dfrac{ 4 \rho L }{\pi \ D ^2}}* { \dfrac {\pi \ (D) ^2} {2\rho L}}[/tex]

[tex]\dfrac{R_s}{R_L} =2[/tex]

[tex]{R_s}=2{R_L}[/tex]

Thus; the resistance of the longer one is twice as big as the resistance of the shorter one.

Answer:

it attracts

Explanation:

since in a magnetic body there are two poles

(north and south poles)if the first pole was repeled when brought near the North Pole therefore the other end is going to attarct because the first end was also a North Pole while the second end will be a south pole

Centripetal acceleration = (speed squared) / (radius)

Centripetal acceleration = (10 m/s)² / (1.0 m)

Centripetal acceleration = (100 m²/s²) / (1.0 m)

Centripetal acceleration = 100 m/s²

Answer:

e

Explanation:

i took it myself and got it right

The complete question is;

In an amusement park ride called The Roundup, passengers stand inside a 16-m-diameter rotating ring. After the ring has acquired sufficient speed, it tilts into a vertical plane.

Suppose the ring rotates once every 4.30 s . If a rider's mass is 53.0 kg , with how much force does the ring push on her at the top of the ride?

Answer:

F_top = 385.36 N

Explanation:

We are given;

mass;m = 52 kg

Time;t = 4.3 s

Diameter;d = 16m

So,Radius;r = 16/2 = 8m

The formula for the centrifugal force is given as;

F_c = mω²R

Where;

R = radius

Angular velocity;ω = 2πf

f = frequency = 1/t = 1/4.3 Hz

F_c = 53 × (2π × 1/4.3)² × 8 = 905.29 N.

The force at top would be;

F_top = F_c - mg

F_top = 905.29 - (9.81 × 53) N

F_top = 385.36 N

The force at the top of ride will be "385.36 N".

According to the question,

Rider's mass, m = 52 kg

Time, t = 4.3 s

Diameter, d = 16 m

Radius, r = [tex]\frac{16}{2}[/tex] = 8 m

Frequency, f = [tex]\frac{1}{t}[/tex] = [tex]\frac{1}{4.3}[/tex] Hz

We know the formula,

Centrifugal force,  [tex]F_c[/tex] = mω²R

or,

Angular velocity, ω = 2πf

By substituting the values in the above formula,

[tex]F_c = 53(2\pi \times (\frac{1}{4.3})^2\times 8 )[/tex]

    [tex]= 905.29[/tex] N

hence,

The top force will be:

→ [tex]F_{top} = F_c[/tex] - mg

By substituting the values,

          [tex]= 905.29-(9.81\times 53)[/tex]

          [tex]= 385.36[/tex] N

Thus the above response is correct.  

Find out more information about force here:

https://brainly.com/question/12970081

Answer:

e. Doubles.

Explanation:

Resolving power is given by the formula as follows :

[tex]\dfrac{1}{d\theta}=\dfrac{D}{1.22\lambda}[/tex]

Here, [tex]d\theta[/tex] is the angle subtended by two distant objects

D is diameter of the telescope

Here, the diameter of a radar dish is doubled, assuming all other factors remain unchanged, then the resolving power gets doubled. Hence, the correct option is (e).

Answer:

C) There will be more electrons ejected

Explanation:

The number of electrons ejected whenever a photoelectric effect is identified it is proportional to the intensity of the incident light

Nevertheless, the photoelectrons' maximal kinetic energy is independent of their light intensity

Therefore, the maximum speed of the electron ejected doesn't really depend on the light intensity

So,  if the intensity rises, only the number of electrons ejected will rised

Therefore the option c is correct

Answer:

C) There will be more electrons ejected

Explanation:

In the photoelectric effect, photons with an energy of E are shone upon a piece of metal, and if the energy of the photons overcome the work function ϕ of the metal, then electrons with will be ejected from the metal with a kinetic energy KE.

E_photon = Φ + KE

Each photon is capable of ejecting one electron from the metal. Therefore, increasing the intensity of the light (the number of photons shone on the metal) will increase the number of electrons ejected from the metal.

Answer:

the other force= (16.3i + 14.6j)N

EXPLANATION:

Given:

Mass=2.80-kg

t= 1.2s

Since the object started from rest, the origin is (0,0) which symbolize the the object's initial position.

We will need to calculate the magnitude of the displacement using the below formula;

d = (1/2)at2 + v0t + d0

But note that

d0 = 0,( initial position)

v0 = 0( initial position)

a is the net acceleration

d = √[4.202 + (-3.30)2] m = 5.34 m

Hence, the magnitude of the displacement is 5.34 m, then we can make 'a' the subject of formula in the above expression in order to calculate the value for acceleration, note that d0 = 0,( initial position) and v0 = 0( initial position)

d = (1/2)at2

a = 2d/t2 = 2(5.34)/(1.20)2 m/s2 = 7.42 m/s2

the net acceleration is 7.42 m/s2

Acceleration in terms of the vector can be calculated as

a=2(ri - r0)/t^2

Where t =1.2s which is the time

a= 2(4.2i - 3.30j)/ 1.2^2

a=( 5.83i - 4.58j)m/s

now the net force can now be calculated since we have known the value of acceleration, using the formula below;

F(x) = ma - mg

Where a = 5.83i - 4.58j)m/s and g= 9.8m/s

2.8(5.83i - 4.58j)m/s - (2.80 × 9.8)m/s^2

Therefore, the other force= (16.3i + 14.6j)N

Answer:

The minimum speed required  is 2.62m/s

Explanation:

The value of  gravitational acceleration = g = 9.81 m/s^2

Radius of the vertical circle = R = 0.7 m

Given the mass of the pail of water = m

The speed at the highest point of the circle = V

The centripetal force will be needed must be more than the weight of the pail of water in order to not spill water.

Below is the calculation:

[tex]\frac{mV^{2}}{R} = mg[/tex]

[tex]V = \sqrt{gR}[/tex]

[tex]V = \sqrt{9.81 \times 0.7}[/tex]

[tex]V = 2.62 m/s[/tex]

Answer:

The  angular speed is [tex]w = 5.89 \ rad/s[/tex]

Explanation:

From the question we are told that

    The time taken is  [tex]t = 1.6 s[/tex]

    The number of somersaults  is n  =  1.5

The total angular displacement during the somersault is mathematically represented as

         [tex]\theta = n * 2 * \pi[/tex]

substituting values

        [tex]\theta = 1.5 * 2 * 3.142[/tex]

       [tex]\theta = 9.426 \ rad[/tex]

 The angular speed is mathematically represented as

         [tex]w = \frac{\theta }{t}[/tex]

substituting values

         [tex]w = \frac{9.426}{1.6}[/tex]

          [tex]w = 5.89 \ rad/s[/tex]

Answer:

Explanation:

Radius of wheel = 1.2 m

A )

To know angular speed after t sec , we use the formula

ω = ω₀ + α t  , where ω₀ is initial velocity , α is angular acceleration

ω = 0 + 4.4 x 2

= 8.8 rad / s

v= ωR , v is tangential speed , ω is angular speed , R is radius of wheel .

= 8.8 x 1.2 = 10.56 m /s

B )

radial acceleration

Ar = v² / R

= 10.56² / 1.2

= 92.93 m /s²

Tangential acceleration

At = angular acceleration x radius

= 4.4 x 1.2 = 5.28 m /s²

Total acceleration

=  √ ( At² + Ar² )

=√ (5.28² +92.93²)

= 93 m /s²

C )

θ = ωt + 1/2 α t²     where θ is angular position after time t .

= 0 + .5 x 4.4 x 2²

= 8.8 rad

= 180x 8.8/ 3.14  = 504.45 degree

initial position = 57.3°

final position = 504 .45 + 57.3

= 561.75 °

= 561.75 - 360

= 201.75 ° .

Position of radius vector of point P will be at angle of 201.75 from horizontal axis .

Answer:

Explanation:

Gauss Theorem

E2πrL=o2πRL/εo

then

E=oR/(rεo)

E=(0.4*10^-9*2*10^-3) / (3*10^-3*8.85*10^-12)

= 30.13 N/C

Answer:

Density = 10,933.93 kg/m^3

the density of the material is 10,933.93 kg/m^3

Explanation:

Density is the mass per unit volume

Density = mass/volume = m/V

Volume of a cylinder V = πr^2 h

Given;

Height h = 48.5mm = 0.0485 m

Radius r = diameter/2 = 49mm÷2 = 24.5mm = 0.0245m

Substituting the values;

Volume V = π×(0.0245^2)×0.0485

V = 0.000091458438030 m^3

V = 0.000091458 m^3

The mass is given as;

Mass = 1 kg

So, the density can be calculated as;

Density = 1/0.000091458

Density = 10933.92825785 kg/m^3

Density = 10,933.93 kg/m^3

the density of the material is 10,933.93 kg/m^3