The reform reaction between steam and gaseous methane (CH4) produces "synthesis gas," a mixture of carbon monoxide gas and dihydrogen gas. Synthesis gas is one of the most widely used industrial chemicals, and is the major industrial source of hydrogen. Suppose a chemical engineer studying a new catalyst for the reform reaction finds that 924. liters per second of methane are consumed when the reaction is run at 261.°C and 0.96atm. Calculate the rate at which dihydrogen is being produced.

Answer: The molar mass of menthol is 156.15 g/mol

Explanation:

Depression in freezing point is given by:

[tex]\Delta T_f=K_f\times m[/tex]

[tex]\Delta T_f=T_f^0-T_f=2.84^0C[/tex] = Depression in freezing point

[tex]K_f[/tex] = freezing point constant = [tex]20.8^0C/m[/tex]

m= molality

[tex]\Delta T_f=K_f\times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]

Weight of solvent (cyclohexane)= 25.0 g = 0.025 kg  

Molar mass of solute (menthol) = ?

Mass of solute (menthol) = 0.533 g

[tex]2.84^0C=20.8\times \frac{0.533}{xg/mol\times 0.025}[/tex]

[tex]x=156.15g/mol[/tex]

The molar mass of menthol is 156.15 g/mol

Answer:  The mole fraction of the solvent in a solution that contains 2.51 g glycerol dissolved in 21.10 mL ethanol is 0.93

Explanation:

Given : Volume of ethanol (solvent) = 21.10 ml

density of ethanol (solvent)= 0.789 g/ml

Mass of ethanol (solvent) = [tex]0.789g/ml\times 21.10ml=16.6g[/tex]

Mass of glycerol (solute) = 2.51 g

Mole fraction of a component is the ratio of moles of that component to the total moles present.

moles of ethanol =[tex]\frac{\text {given mass}}{\text {molar mass}}=\frac{16.6g}{46g/mol}=0.36mol[/tex]

moles of glycerol =[tex]\frac{\text {given mass}}{\text {molar mass}}=\frac{2.51g}{92g/mol}=0.027mol[/tex]

mole fraction of ethanol (solvent) = [tex]\frac{\text {moles of ethanol}}{\text {moles of ethanol + moles of glycerol}}=\frac{0.36}{0.36+0.027}=0.93[/tex]

The mole fraction of the solvent in a solution that contains 2.51 g glycerol dissolved in 21.10 mL ethanol is 0.93

Answer:

nice handwrtting

Explanation:

Answer:

0.591 g of magnesium phosphate is the theoretical yield.

Magnesium nitrate is the limiting reactant.

Explanation:

Hello!

In this case, since the balanced reaction turns out:

[tex]3Mg(NO_3)_2+2Na_3PO_4\rightarrow Mg_3(PO_4)_2+6NaNO_3[/tex]

Next, we compute the grams of magnesium phosphate yielded by each reactant, considering the present mole ratios and molar masses:

[tex]m_{Mg_3(PO_4)_2}^{by\ Mg(NO_3)_2}=1.00gMg(NO_3)_2*\frac{1molMg(NO_3)_2}{148.31gMg(NO_3)_2}*\frac{1molMg_3(PO_4)_2}{3molMg(NO_3)_2} *\frac{262.86gMg_3(PO_4)_2}{1molMg_3(PO_4)_2} \\\\m_{Mg_3(PO_4)_2}^{by\ Mg(NO_3)_2}= 0.591gMg_3(PO_4)_2\\\\m_{Mg_3(PO_4)_2}^{by\ Na_3PO_4}=1.00gNa_3PO_4*\frac{1molNa_3PO_4}{163.94gNa_3PO_4}*\frac{1molMg_3(PO_4)_2}{2molNa_3PO_4} *\frac{262.86gMg_3(PO_4)_2}{1molMg_3(PO_4)_2} \\\\m_{Mg_3(PO_4)_2}^{by\ Na_3PO_4} = 0.802gMg_3(PO_4)_2[/tex]

Thus, we infer that the correct theoretical yielded mass is 0.591 g as magnesium nitrate is the limiting reactant for which it produces the fewest grams of product.

However, is not possible to compute the percent yield since no actual yield is given, and must be provided or indicated by the problem or an experiment and it not here, nevertheless, you may compute the percent yield by dividing the actual yield by the theoretical and then multiplying by 100:

[tex]Y=\frac{actual}{0.591g}*100\%[/tex]

Best regards!

Hello there!

Aspartame has 4 kilocalories of energy per gram and table sugar has 3.9 kilocalories. They are pretty much same but aspartame is 200 times sweeter than sucrose so probably would be aspartame that has more calories.

Answer:

STP values are most often cited for gases because their characteristics change dramatically with temperature and pressure. One common definition of STP is a temperature of 273 K (0° Celsius or 32° Fahrenheit) and the standard pressure of 1 atm. Under these conditions, one mole of a gas occupies 22.4 L.

Answer:

298. 7 K.

Explanation:

Hello!

In this case, since equation we use to compute the heat in a cooling or heating process is:

[tex]Q=mC(T_f-T_i)[/tex]

Whereas we are given the heat, mass, specific heat and initial temperature. Thus, we infer that we need to solve for the final temperature just as shown below:

[tex]T_f=T_i+\frac{Q}{mC}\\\\T_f=1000 K+\frac{-270000J}{1000g*0.385\frac{J}{g*K} } \\\\T_f=298.7 K[/tex]

It is important to notice that the iron release heat as water absorbs it, that is why it is taken negative.

Best regards!

Answer:

[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2

Explanation:

2H2S(g)⇋2H2(g)+S2(g)2H2S(g)⇋2H2(g)+S2(g)

The equilibrium constant expression in terms of concentrations is:

Kc=[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2.

The equilibrium expression for the given reaction can be written in terms of equilibrium constant which is the ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.

Equilibrium is a state for a reversible reaction where, the rate of forward reaction is equal to the rate of backward reaction. The rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of the products.

The given reaction at equilibrium state is written as:

[tex]\rm 2H_{2}S (g)\leftrightharpoons 2H_{2} (g)+ S_{2}(g)[/tex]

The equilibrium constant Kb is ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.

[tex]Kb = \rm \frac{[H_{2}S]^{2}}{[H_{2}]^{2} [S_{2}]}[/tex]

The rate of the reaction will be r = Kb [H₂]² [S₂].

To find more on equilibrium constant, refer here:

https://brainly.com/question/15118952

#SPJ2

Answer:

b. temperature difference

Answer:

C8H16O4

Explanation:

C2H4O= 24+4+16

44

n=molar mass/empirical formula

n=176.21/44

=4

Therefore

Molar Formula= (C2H4O)4=C8H16O4

the amount of reactants = the amount of products

N2 + 3H2 --> 2NH3

Answer:

1450 W

Explanation:

5800n x 20m        =1450w

      80s

Explanation:

How many neutrons are there in the nucleus of arsenic?42 neutrons

The nucleus consists of 33 protons (red) and 42 neutrons (blue).

Answer:

2.68 cm^3

Explanation:

Density= Mass/Volume

so...

8.96 g/cm^3 = 24.01 g/ V

and then u solve so it would be 2.68 cm ^3

((:

Answer:

D 27.74%

Explanation:

Percent composition of Magnesium (Mg) in Magnesium Phosphate compound ie Mg3(PO4)2 = 27.74%

Answer:

The answer is D

Explanation:

I took the test

Answer:

Explanation:

Energy of falling radiation having wavelength of 265 nm

= h c / λ where h is plank's constant , c is velocity of light and λ is wavelength of radiation . Putting the values

Energy of light photon = 6.6 x 10⁻³⁴ x 3 x 10⁸ / 265 x 10⁻⁹

= .0747 x 10⁻¹⁷

= 7.47 x 10⁻¹⁹ J .

Work function of sodium is 4.41 x 10⁻¹⁹

So kinetic energy of ejected electron = energy of falling photon - work function

= 7.47 x 10⁻¹⁹ - 4.41 x 10⁻¹⁹

= 3.06 x 10⁻¹⁹ eV .

Answer:

50 g of S are needed

Explanation:

To star this, we begin from the reaction:

S(s) + O₂ (g) →  SO₂ (g)

If we burn 1 mol of sulfur with 1 mol of oxygen, we can produce 1 mol of sulfur dioxide. In conclussion, ratio is 1:1.

According to stoichiometry, we can determine the moles of sulfur dioxide produced.

100 g. 1mol / 64.06g = 1.56 moles

This 1.56 moles were orginated by the same amount of S, according to stoichiometry.

Let's convert the moles to mass

1.56 mol . 32.06g / mol = 50 g

Answer:

84.8 mL

Explanation:

From the question given above, the following data were obtained:

Mass of CuNO₃ = 3.53 g

Molarity of CuNO₃ = 0.330 M

Volume of solution =?

Next, we shall determine the number of mole in 3.53 g of CuNO₃. This can be obtained as follow:

Mass of CuNO₃ = 3.53 g

Molar mass of CuNO₃ = 63.5 + 14 + (16×3)

= 63.5 + 14 + 48

= 125.5 g/mol

Mole of CuNO₃ =?

Mole = mass / Molar mass

Mole of CuNO₃ = 3.53 / 125.5

Mole of CuNO₃ = 0.028 moles

Next, we shall determine the volume of the solution. This can be obtained as follow:

Molarity of CuNO₃ = 0.330 M

Mole of CuNO₃ = 0.028 moles

Volume of solution =?

Molarity = mole /Volume

0.330 = 0.028 / Volume

Cross multiply

0.330 × Volume = 0.028

Divide both side by 0.330

Volume = 0.028 / 0.330

Volume = 0.0848 L

Finally, we shall convert 0.0848 L to millilitres (mL). This can be obtained as follow:

1 L = 1000 mL

Therefore,

0.0848 L = 0.0848 L × 1000 mL / 1 L

0.0848 L = 84.8 mL

Therefore, the volume of the solution is 84.8 mL.

Answer:

I'm pretty sure its the one that says very little at the beginning but if I get it wrong I'm sorry

The mass allowance of Vitamin C for children aged 4-8 years is equal to 0.025 grams.

A mole can be defined as a standard unit that can be utilized to evaluate the number of entities such as atoms, molecules, ions, or other particular particles in a particular amount of the substance.

The number of elementary entities present in one mole of any chemical substance was found to be equal to 6.023 × 10²³ which is also known as the Avogadro number.

Given, the number of moles of vitamin C = 0.000142 moles

Given, the molecular formula of Vitamin C is C₆H₈O₆.

The mass of one mole of C₆H₈O₆ = 176 g

One mole of Vitamin C has mass = 176 g

0.000142 mol of Vitamin C has mass  = 0.000142×176 = 0.025 g

Therefore, the mass of 0.000142 mol of Vitamin C is 0.025 g.

Learn more about the mole, here:

brainly.com/question/26416088

#SPJ2

Answer:

There are no options provided dude,

But i guess the  answer will be a metal with valency 2 for sure as the subscript given for N in 'M3N2' is 2 so the valency of the metal u need to select will be 2 for sure

It can be magnesium or some other if the provided options in real question has Mg then its the answer

Answer:

0.73g/cm^3

Explanation:

d=m/v

d=11/15

d=0.73

Answer:

Pe = 8700 N/m³

Vesp = 1,15 cm³/g

Explanation:

Ya que conocemos el valor de la densidad de este aceite, es muy sencillo calcular tanto volumen como peso específico.

En el caso de volumen específico, esta se refiere al cociente del volumen de un líquido con su masa respectiva. En otras palabras, es el inverso de la densidad, por tanto usamos la siguiente expresión para el volumen específico:

Vesp = 1/d

Vesp = 1 / 0,87

Para el caso del peso específico, se calcula como el cociente de la masa del líquido y su volumen que ocupa. Sin embargo no conocemos ninguno de esos dos datos, por lo que para calcular el peso específico solo basta multiplicar este valor por la aceleración de gravedad, que vamos a asumir para este problema que es 10 m/s². Y ademas cambiaremos las unidades de densidad de g/cm³ a kg/m³. Esto es porque las unidades de peso específico son N/m³ y los newton (N) son kg m/s².

d = 0,87 g/cm³ * (1 kg/1000g) * (100 cm/1m)³ = 870 kg/m³

Pe = 870 kg/m³ * 10 m/s²

ESpero te sirva.

Answer:

Option B & Option C

Explanation:

correct on edge! :D

When chemicals combine chemical change takes place which is accompanied by emission of heat and light.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical changes:

1) inorganic changes

2)organic changes

3) biochemical changes

During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical change,here:

https://brainly.com/question/23693316

#SPJ5

Answer:

the answer p+n

Explanation:

Answer:

Empirical formula

Explanation:

The empirical formula of a compound is the simplest whole number ratio of atoms of each element in the compound. It is determined using data from experiments and therefore empirical.

Answer:

The conditions are

1) Small enough

2) Electronegative atom

3) highly electronegative

4) lone pair of electrons

The correct statement therefore is

It needs to be small enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one electronegative atom, it needs to be highly electronegative enough to create a delta on the connected hydrogen, and it needs to have at least one lone pair of electrons.

Explanation:

Hydrogen bonding is a type of intermolecular bond that occurs between the partial positive charge (delta) on a hydrogen atom bonded to a small highly electronegative element (like nitrogen, oxygen or fluorine) and the free electrons on another electronegative element of another molecule.

The hydrogen atom with the partial positive charge (delta) is known as the hydrogen bond donor, while the electronegative element, carrying lone electrons is called the hydrogen bond acceptor.

Let's take a deeper look at these terms:

1) Hydrogen bond donor

Using water (H₂O) as an example, the high electronegativity of the oxygen atom covalently bonded to the hydrogen atom draws the lone electron in the 1s orbital of the hydrogen atom, creating a partial positive charge (d⁺) on the hydrogen atom. This is what happens within one water molecule

2) Hydrogen bond acceptor

When two or more molecules of water interact, the partial positive charge (d⁺) on the hydrogen atom of one molecule, is attracted to the valence or free electrons on the oxygen atom of a nearby molecule of water thus creating a dipole-dipole intermolecular bond known as a hydrogen bond.

For the hydrogen bond to be effective, the electronegative atom bonded to the hydrogen acting as the hydrogen bond donor in the first water molecule needs to be small enough so as not to disrupt the 1s orbital of the hydrogen atom. The smaller the size of the electronegative atom, the stronger the partial negative charge created on the hydrogen atom.

The valence or free pair of electrons on the electronegative (oxygen) atom of the second molecule of water (hydrogen bond acceptor) is what attracts the partial positive charge on the hydrogen atom to create the hydrogen bond