It would take 15.5 seconds for the concentration of A to decrease from 0.870 M to 0.250 M.
For a zero-order reaction, the rate equation is given by:
rate =[tex]-k[A]^0[/tex] = -k
where [A] is the concentration of the reactant and k is the rate constant. Since the order of the reaction with respect to A is zero, the rate is independent of the concentration of A.
The integrated rate law for a zero-order reaction is:
[A] = -kt + [A]0
where [A]0 is the initial concentration of A and t is the time.
Rearranging the equation, we get:
t = ([A] - [A]0) / -k
Substituting the given values, we get:
t = (0.250 M - 0.870 M) / (-0.0400 M/s) = 15.5 s
Learn more about rate law here:
https://brainly.com/question/30379408
#SPJ11
1. Arrange the gases in order of decreasing density when they are all under STP conditions.
Neon , Helium, Florine, Oxygen
2. Some metals will react with hydrochloric acid to liberate hydrogen gas. The general equation for this reaction is: 2 M(s) + 2x HCl(aq) → 2 MClx(aq) + x H2(g), where x = 1, 2, or 3. In an experiment to determine the molar mass, and therefore the identity, of a reactive metal, a 0.152 g sample of the metal was combined with an excess of 2.0 M HCl(aq). All of the metal was consumed and the hydrogen gas was collected at a pressure of 760 mmHg in a 150 mL vessel at a temperature of 20 oC. If x = 2, what is the metal? (R = 0.08206 atm∙L/mol∙K; 0 oC = 273 K; 1 atm = 760 mmHg). Give the full name of the element (all letters lower case).
3.Calculate the pressure in mmHg of 0.874 g of argon at a temperature of 100 oC, in a 550 mL container. Assume argon behaves as an ideal gas. (R = 0.08206 atm∙L/mol∙K; 0 oC = 273 K; 1 atm = 760 mmHg; atomic mass of argon = 39.95 amu). Give your answer to 3 significant figures.
4.What happens to the volume of an ideal gas inside a balloon if the temperature increases from 25 oC to 100 oC but the pressure and amount of gas remains constant? (0 oC = 273 K).
5.What happens to the volume of an ideal gas if its pressure is tripled and its Kelvin temperature is halved, assuming the moles of gas does not change?
The volume of the gas inside the balloon will increase if the temperature increases from 25 °C to 100 °C while the pressure and amount of gas remain constant. If the pressure of an ideal gas is tripled and its Kelvin temperature is halved while the number of moles of gas remains constant.
1 - Arranging the gases in order of decreasing density at STP:
Fluorine > Oxygen > Neon > Helium
2 - The balanced chemical equation for the reaction is:
[tex]2M(s) + 2HCl(aq) \rightarrow 2MCl_{2}(aq) + H_{2}(g)[/tex]
From the equation, we see that 1 mole of metal reacts with 1 mole of HCl to produce 1 mole of [tex]H_2[/tex]. We can use the ideal gas law to find the number of moles [tex]H_2[/tex] produced:
PV = nRT
n = PV/RT
n = (760 mmHg)(0.150 L)/(0.08206 atm∙L/mol∙K)(293 K)
n = 0.00607 mol
Since 1 mole of metal produces 1 mole of [tex]H_2[/tex], the molar mass of the metal is equal to the mass of the metal sample divided by the number of moles of metal used:
molar mass = (0.152 g) / (0.00607 mol)
molar mass = 25.0 g/mol
The metal with a molar mass of 25.0 g/mol and x = 2 is magnesium (Mg).
To find the pressure of argon at 100 °C, we first need to convert the temperature to Kelvin:
T = 100 oC + 273 = 373 K
3 - Next, we can use the ideal gas law to find the pressure of the gas:
PV = nRT
n = m/M
n = (0.874 g) / (39.95 g/mol)
n = 0.0219 mol
V = 550 mL = 0.550 L
R = 0.08206 atm∙L/mol∙K
P = nRT/V
P = (0.0219 mol)(0.08206 atm∙L/mol∙K)(373 K) / (0.550 L)
P = 1.49 atm
Finally, we can convert the pressure to mmHg:
P = 1.49 atm × (760 mmHg/1 atm) = 1134 mmHg
Therefore, the pressure of argon at 100 °C in a 550 mL container is 1134 mmHg.
4 - According to Charles's law, the volume of an ideal gas is directly proportional to its temperature, assuming constant pressure and amount of gas. Therefore, if the temperature increases from 25 °C to 100 °C while the pressure and amount of gas remain constant, the volume of the gas inside the balloon will increase.
5 - According to the combined gas law, the volume of an ideal gas is inversely proportional to its pressure and directly proportional to its temperature, assuming a constant amount of gas. Therefore, if the pressure of the gas is tripled and its Kelvin temperature is halved while the number of moles of gas remains constant, the volume of the gas will be reduced to one-third of its original value.
To learn more about volume
https://brainly.com/question/31606882
#SPJ4
Use the information and table to answer the following question A student is planning to determine the specific heat of iron. To do this experiment the student will need to perform the following procedures: StepProcedure 1 Measure the mass of the iron sample 2 Measure the initial temperature of a known volume of water 3 Heat the iron sample . 4 Place the iron sample in the water What is Step 5 in the experiment?
Based on the given information and procedure steps, Step 5 in the experiment would be to measure the final temperature of the water after adding the heated iron sample.
Why is measuring the final temperature a necessary step?This step is necessary to determine the change in temperature of the water, which is used to calculate the heat gained by the water and the heat lost by the iron sample.
By measuring the initial and final temperatures of the water, the student can determine the temperature change and use it in the calculation of specific heat.
Find out more on experiment here: https://brainly.com/question/25303029
#SPJ1
For the reaction NH4Cl(aq)NH3(g) + HCl(aq) H° = 86.4 kJ and S° = 79.1 J/K The equilibrium constant for this reaction at 261.0 K is
The equilibrium constant for the reaction NH₄Cl(aq)NH₃(g) + HCl(aq) at 261.0 K is 3.98 x 10⁽⁻¹¹⁾.
We can use Gibbs free energy equation to find the equilibrium constant (K) at a given temperature;
ΔG° = -RTlnK
Where;
ΔG° = standard free energy change
R = gas constant (8.314 J/K mol)
T = temperature in Kelvin
K = equilibrium constant
First, we need to convert the given entropy value from J/K to J/mol K;
ΔS° = 79.1 J/K = 79.1 J/mol K
Next, we can calculate the standard free energy change at 261.0 K;
ΔG° = 86.4 kJ/mol - 261.0 K × (79.1 J/mol K / 1000 J/kJ)
= 61.0 kJ/mol
Finally, we can use the equation to find the equilibrium constant;
ΔG° = -RTlnK
61.0 kJ/mol = -(8.314 J/K mol) × (261.0 K) × ln(K)
ln(K) = -23.90
K = [tex]e^{(-23.90)}[/tex]= 3.98 x 10⁽⁻¹¹⁾
Therefore, the equilibrium constant is 3.98 x 10⁽⁻¹¹⁾.
To know more about Gibbs free energy here
https://brainly.com/question/20358734
#SPJ4
a periodic karman vortex street is formed when
A periodic Karman vortex street is formed when a fluid flow, such as air or water, encounters an obstacle, typically a cylindrical or bluff body.
This phenomenon occurs due to the separation of fluid layers around the object, which creates alternating low-pressure regions on each side. The fluid flow begins to shed vortices in a periodic manner, generating a pattern known as a Karman vortex street, these vortices are formed at regular intervals, creating a distinct street-like pattern downstream of the obstacle. The shedding of vortices is influenced by the Reynolds number, which determines the fluid flow regime. In low Reynolds number conditions, the flow is laminar, and no vortex street is formed. However, as the Reynolds number increases, the flow transitions to a turbulent regime, leading to the formation of the Karman vortex street.
The presence of a Karman vortex street can have various consequences on structures, such as increased vibrations and dynamic loads. In engineering applications, understanding and mitigating the effects of vortex shedding is crucial to ensure structural stability and prevent failures. To reduce the impact of a Karman vortex street, engineers may implement design modifications or use devices such as vortex breakers or flow control techniques to alter the flow characteristics around the object. So therefore when a fluid flow, such as air or water, encounters an obstacle, typically a cylindrical or bluff body, a periodic Karman vortex street is formed.
To learn more about fluid here:
https://brainly.com/question/29654184
#SPJ11
Why is equivalent mass of CO2 used when analyzing greenhouse gas emissions?
Because the mass of CO2 varies with atmospheric pressure
To have a measurement that can be used to compare emissions of different greenhouse gases with each other
To have a measurement that can be easily calculated from measurements at one location
Because the mass of CO2 varies with atmospheric temperature
equivalent mass of CO2 is used when analyzing greenhouse gas emissions is to have a measurement that can be used to compare emissions of different greenhouse gases with each other.
This is because greenhouse gases have different global warming potentials (GWPs) and lifetimes in the atmosphere, making it difficult to directly compare their impacts on climate change. By converting emissions of other greenhouse gases into equivalent masses of CO2, we can more easily quantify their impact and track progress towards reducing overall greenhouse gas emissions. Additionally, using equivalent mass of CO2 as a standardized measurement can be easily calculated from measurements at one location, making it a practical tool for monitoring emissions.
The equivalent mass of CO2 is used when analyzing greenhouse gas emissions is to have a measurement that can be used to compare emissions of different greenhouse gases with each other. By using CO2 equivalents, it allows for a standardized unit of measurement, making it easier to understand the overall impact of various greenhouse gases on climate change. This comparison is essential for policymakers and researchers to determine the most effective ways to reduce emissions and mitigate climate change.
To know more about CO2 visit :
https://brainly.com/question/28870590
#SPJ11
during the electrophilic aromatic substitution reaction rates experiment, if within the alloted time discoloration at room temperature was not observed for any sample, the sample requiredA. Extended observation at room temperatureB. HeatingC. None of the above requiredD. Cooling
During electrophilic aromatic substitution reactions, sometimes heating is needed to increase the reaction rate and achieve observable results, such as discoloration.
If within the allotted time discoloration at room temperature was not observed for any sample during the electrophilic aromatic substitution reaction rates experiment, it would mean that the reaction did not take place.
In such a case, the sample would require extended observation at room temperature to see if the reaction would occur over a longer period of time.
Heating or cooling the sample would not be necessary as the reaction did not take place at room temperature. Therefore, the answer is A, extended observation at room temperature.
During electrophilic aromatic substitution reactions, sometimes heating is needed to increase the reaction rate and achieve observable results, such as discoloration.
Learn more about electrophilic aromatic
brainly.com/question/14651665
#SPJ11
what atomic or hybrid orbitals make up the sigma bond between al and f in aluminum fluoride, alf3?
The sigma bond between aluminum and fluorine in AlF3 is formed by the overlap of an sp2 hybrid orbital of aluminum with a 2p orbital of fluorine.
In AlF3, the aluminum atom forms a sigma bond with each of the three fluorine atoms. The formation of a sigma bond involves the overlap of atomic or hybrid orbitals of the two atoms.
The aluminum atom has an electronic configuration of [Ne] 3s2 3p1, and its three valence electrons occupy the 3s and 3p orbitals. To form the sigma bond, the aluminum atom undergoes hybridization to form three sp2 hybrid orbitals.
In sp2 hybridization, one 3s orbital and two 3p orbitals of aluminum combine to form three hybrid orbitals, which are oriented in the shape of a trigonal plane. The three hybrid orbitals are equivalent in energy and have a bond angle of 120 degrees between them.
Each hybrid orbital of aluminum overlaps with a 2p orbital of a fluorine atom to form a sigma bond. The 2p orbital of fluorine has a similar shape and orientation to the hybrid orbital of aluminum, and the overlap occurs along the axis of the bond.
Click the below link, to learn more about Hybrid orbitals:
https://brainly.com/question/30506016
#SPJ11
write the formula for a complex formed between ni2 and cn− with a coordination number of 4
The formula for the complex formed between Ni2+ and CN- with a coordination number of 4 is [Ni(CN)4]2-.
In this complex, Ni2+ ion acts as the central metal ion and four CN- ions act as ligands.
Each CN- ion donates one electron pair to the central Ni2+ ion forming four coordinate covalent bonds. The resulting complex has a tetrahedral geometry with a coordination number of 4.The negative charge on the complex ion is due to the presence of two extra electrons on the complex as a result of the coordination of four CN- ligands. The overall charge of the complex ion is balanced by the 2- charge on the complex ion.
In this complex, Ni²⁺ is the central metal ion, and CN⁻ is the ligand. The coordination number of 4 indicates that there are four CN⁻ ligands attached to the Ni²⁺ ion.To write the formula, you enclose the central metal ion and the ligands in square brackets, followed by the overall charge of the complex. In this case, Ni²⁺ has a +2 charge, and there are four CN⁻ ligands with a -1 charge each. Thus, the overall charge of the complex is 2 - 4 = -2, and the formula is [Ni(CN)₄]²⁻.
To know more about metal visit:
https://brainly.com/question/29400906
#SPJ11
determine the radius of the smallest bohr orbit in the doubly ionized lithium. what is the energy of this orbit?
The radius of the smallest Bohr orbit in doubly ionized lithium is 5.29 x 10^-12 m and the energy of this orbit is -13.6 eV.
The radius of the smallest Bohr orbit in doubly ionized lithium can be determined using the formula for the radius of the nth orbit in a hydrogen-like atom. For a doubly ionized lithium, the atomic number is 3, and the number of electrons is 1. Therefore, the radius of the smallest Bohr orbit can be calculated as:
r = (n^2*h^2)/(4π^2*m*e^2)
where n is the principal quantum number, h is Planck's constant, m is the reduced mass of the electron and nucleus, and e is the charge of the electron.
For the smallest orbit (n=1), the radius of the orbit is:
r = (1^2*(6.626 x 10^-34 J s)^2)/(4π^2*(9.109 x 10^-31 kg + 6.941 x 1.661 x 10^-27 kg)*(1.602 x 10^-19 C)^2)
r = 5.29 x 10^-12 m
The energy of this orbit can be calculated using the formula:
E = (-13.6 eV)/n^2
where n is the principal quantum number. For the smallest orbit (n=1), the energy of the orbit is:
E = (-13.6 eV)/1^2
E = -13.6 eV
Therefore, the radius of the smallest Bohr orbit in doubly ionized lithium is 5.29 x 10^-12 m and the energy of this orbit is -13.6 eV.
Know more about Bohr's orbit here:
https://brainly.com/question/2285096
#SPJ11
X-rays with a wavelength of 0.085 nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm. How many diffraction orders are observed?
A wavelength of 0.085 nm diffract from a crystal in which the spacing between atomic planes is 0.213 nm, the number of diffraction are 5.
Bragg's law states that, "When the X-ray is incident onto a crystal surface, its angle of incidence, θ, will reflect with the same angle of scattering, θ".
Use Bragg's law to calculate the order's of diffraction.
According to Bragg's law, the condition for diffraction is,
nλ = 2d sinθ
⇒ n = (2d sinθ) / λ
Substitute the values,
n = (2 × 0.213 nm × sin 90°) / 0.085 nm
= 5
Therefore, the number of diffraction patterns are observed are 5.
Learn more about Bragg's law from the link given below.
https://brainly.com/question/14617319
#SPJ4
explain why the spot size increases for slit sizes larger and smaller than the one which yields the minimum spot size.
The spot size increases for slit sizes larger and smaller than the one that yields the minimum spot size because the diffracted waves interfere destructively, leading to a wider diffraction pattern. This is due to the decreased diffraction efficiency caused by higher order diffractions.
When light passes through a slit, it diffracts and produces a diffraction pattern with a minimum spot size at a specific slit size. However, for slit sizes larger and smaller than this optimal size, the diffracted waves interfere destructively, resulting in a wider diffraction pattern and larger spot size. This is due to the decreased diffraction efficiency caused by higher order diffractions. The increased spot size for larger slit sizes is also attributed to the wider angular range of the diffracted waves. Therefore, the spot size increases for slit sizes larger and smaller than the one that yields the minimum spot size due to the interference effects of the diffracted waves.
Learn more about increases here:
https://brainly.com/question/2285058
#SPJ11
Which of the following solutions would be expected to have a pH greater than 7.00? a)NH4Br b)C6H5NH3Br c)Ca(NO3)2 d)C6H5COONa
The solutions that are expected to have a pH greater than 7.00 are [tex]Ca(NO_3)_2[/tex] and [tex]C_6H_5COONa[/tex].
The solutions with a pH greater than 7.00 are basic, meaning they have a higher concentration of hydroxide ions ([tex]OH^-[/tex]) than hydrogen ions ([tex]H^+[/tex]). To determine which of the given solutions is basic, we need to identify which ones will produce hydroxide ions when dissolved in water.
a) [tex]NH_4Br[/tex] is the salt of a weak base ([tex]NH_3[/tex]) and a strong acid (HBr). When [tex]NH_4Br[/tex] is dissolved in water, the [tex]NH^{4+}[/tex] ion acts as a weak acid and releases [tex]H^+[/tex] ions, which will make the solution acidic rather than basic. Therefore, [tex]NH_4Br[/tex] is not expected to have a pH greater than 7.00.
b) [tex]C_6H_5NH_3Br[/tex] is the salt of a weak base ([tex]C_6H_5NH_2[/tex]) and a strong acid (HBr). Similar to [tex]NH_4Br[/tex], [tex]C_6H_5NH_3Br[/tex] will not produce hydroxide ions when dissolved in water and will instead release [tex]H^+[/tex] ions, making the solution acidic. Therefore, [tex]C_6H_5NH_3Br[/tex] is not expected to have a pH greater than 7.00.
c) [tex]Ca(NO_3)_2[/tex] is a salt of a strong base ([tex]Ca(OH)_2[/tex]) and a strong acid ([tex]HNO_3[/tex]). When [tex]Ca(NO_3)_2[/tex] is dissolved in water, it dissociates into [tex]Ca^{2+}[/tex] and [tex]NO^{3-}[/tex] ions. [tex]Ca^{2+}[/tex] ions can react with water to form [tex]Ca(OH)^+[/tex] and [tex]OH^-[/tex] ions, which will increase the concentration of hydroxide ions in the solution, making it basic. Therefore, [tex]Ca(NO_3)_2[/tex] is expected to have a pH greater than 7.00.
d) [tex]C_6H_5COONa[/tex] is the salt of a weak acid ([tex]C_6H_5COONa[/tex]) and a strong base (NaOH). When [tex]C_6H_5COONa[/tex] is dissolved in water, it dissociates into [tex]C_6H_5COO^-[/tex] and [tex]Na^+[/tex] ions. [tex]C_6H_5COO^-[/tex] can react with water to form [tex]C_6H_5COONa[/tex] and [tex]OH^-[/tex] ions, which will increase the concentration of hydroxide ions in the solution, making it basic. Therefore, [tex]C_6H_5COONa[/tex] is expected to have a pH greater than 7.00.
For more question on pH click on
https://brainly.com/question/172153
#SPJ11
radial-contact ball bearing is used in an application considered to be light-to-moderate with respect to shock loading. The shaft rotates 3500 rpm and the bearing is subjected to a radial load of 1000 and a thrust load of 250 N. Estimate the bearing life in hours for 90% reliability.
When, shaft rotates at 3500 rpm and the bearing will be subjected to radial load of 1000 and a thrust load of 250 N. Then, the estimated bearing life for 90% reliability is 43,600 hours.
To estimate the bearing life, we can use the following formula;
L₁₀ = (C/P)³ x (10/3) x 60 x n
where; L₁₀ = estimated bearing life in hours for 90% reliability
C = basic dynamic load rating of bearing
P = equivalent dynamic bearing load
n = rotational speed of the bearing in revolutions per minute
To find C, we need to know the bearing's size and type. Let's assume it is a standard size 6205 deep groove ball bearing with a dynamic load rating of 14.3 kN.
To find P, we need to calculate the equivalent dynamic bearing load, which is a combination of the radial and thrust loads. We can use the following formula;
P = (X[tex]F_{r}[/tex] + Y[tex]F_{a}[/tex])
where;
[tex]F_{r}[/tex] = radial load
[tex]F_{a}[/tex] = thrust load
X and Y are factors that depend on the bearing's design and can be found in bearing catalogs or tables. For a 6205 bearing, X = 0.56 and Y = 1.5.
Plugging in the values, we get;
P = (0.56 x 1000 + 1.5 x 250)
= 935 N
Finally, we can calculate the estimated bearing life;
L₁₀ = (14.3/935)³ x (10/3) x 60 x 3500
= 43,600 hours
Therefore, the estimated bearing life is 43,600 hours.
To know more about dynamic load here
https://brainly.com/question/13155640
#SPJ4
which pair of substances cannot form a buffered aqueous solution?18)a)hno3 and nano3b)hcn and kcnc)hf and nafd)hno2 and nano2e)nh3 and (nh4)2so4
The pair of substances that cannot form a buffered aqueous solution is (a) HNO₃ and NaNO₃ because a buffered solution is one that resists changes in pH when an acid or base is added to it.
To form a buffered solution, there needs to be a weak acid and its corresponding conjugate base or a weak base and its corresponding conjugate acid in the solution. HNO₃ is a strong acid, which means it completely dissociates in water to form H+ ions and NO₃⁻ ions. NaNO₃ is a salt of a strong acid and strong base, which also completely dissociates in water to form Na+ ions and NO₃⁻ ions.
Therefore, there are no weak acids or bases present in the solution, making it impossible to form a buffered solution. The other pairs of substances mentioned in the question, HCN and KCN, HF and NaF, HNO₂ and NaNO₂, and NH₃ and (NH₄)₂SO₄, all contain a weak acid and its corresponding conjugate base or a weak base and its corresponding conjugate acid, which means they can form buffered solutions.
You can learn more about buffered solutions at: brainly.com/question/13169083
#SPJ11
Calculate the average speed (meters / second) of a molecule of C6H6 gas (Molar mass - 78.1 mln) ar 20.0 Celsius ? OA 405 m Ox10 m OC304m's OD 306 m O E 9.67 m
The average speed of a molecule of C6H6 gas at 20.0 Celsius is approximately 306 m/s (Option D).
To calculate the average speed of a C6H6 molecule at 20.0 Celsius, we'll use the formula for the root-mean-square (rms) speed:
v_rms = √(3RT/M)
where:
- v_rms is the average speed of the gas molecules
- R is the universal gas constant (8.314 J/(mol·K))
- T is the temperature in Kelvin (20.0 Celsius + 273.15 = 293.15 K)
- M is the molar mass of C6H6 in kg/mol (78.1 g/mol × 0.001 kg/g = 0.0781 kg/mol)
Now, we'll plug the values into the formula:
v_rms = √(3 × 8.314 × 293.15 / 0.0781)
v_rms ≈ 306 m/s
Therefore, the average speed of a molecule of C6H6 gas at 20.0 Celsius is approximately 306 m/s (Option D).
Learn more about molecule
brainly.com/question/19922822
#SPJ11
Balance the following redox reactions in acidic solutions:BrO3- + N2H4 ⟶Br − +N2
BrO3- + 3N2H4 ⟶ Br- + 3N2 + 6H2O Assign oxidation numbers to all elements in the reaction.
BrO3-: Br = +5, O = -2
N2H4: N = -2, H = +1
Br-: Br = -1
N2: N = 0
2. Determine which elements are being oxidized and reduced.
Br is being reduced from +5 to -1.
N is being oxidized from -2 to 0.
3. Balance the non-hydrogen and non-oxygen elements first.
We balance Br by adding 5 electrons to the right-hand side:
[tex]BrO3- + 5e- + 3N2H4 ⟶ Br- + 3N2 + 6H2O[/tex]
4. Balance oxygen by adding water molecules.
[tex]BrO3- + 5e- + 3N2H4 ⟶ Br- + 3N2 + 6H2O[/tex]
5. Balance hydrogen by adding H+ ions.
[tex]BrO3- + 5e- + 3N2H4 + 4H+ ⟶ Br- + 3N2 + 6H2O[/tex]
6. Finally, balance the charges by adding electrons.
[tex]BrO3- + 5e- + 3N2H4 + 4H+ ⟶ Br- + 3N2 + 6H2O[/tex]
Learn more about redox reactions here:
https://brainly.com/question/13293425
#SPJ11
What change in volume results if 170. 0 mL of gas is cooled from 30. 0 °C to 20. 0 °C? (Charles Law)
To calculate the change in volume when 170.0 mL of gas is cooled from 30.0 °C to 20.0 °C using Charles' Law, we need to use the relationship between volume and temperature for an ideal gas. Charles' Law states that at constant pressure, the volume of a gas is directly proportional to its temperature.
By using the formula V₁ / T₁ = V₂ / T₂, where V₁ and T₁ are the initial volume and temperature, and V₂ and T₂ are the final volume and temperature, we can determine the change in volume.
According to Charles' Law, the ratio of the initial volume to the initial temperature is equal to the ratio of the final volume to the final temperature:
V₁ / T₁ = V₂ / T₂
Plugging in the given values:
V₁ = 170.0 mL
T₁ = 30.0 °C + 273.15 = 303.15 K
T₂ = 20.0 °C + 273.15 = 293.15 K
Substituting these values into the equation:
170.0 mL / 303.15 K = V₂ / 293.15 K
To solve for V₂, we rearrange the equation:
V₂ = (170.0 mL / 303.15 K) * 293.15 K
Simplifying the equation:
V₂ ≈ 163.3 mL
Therefore, the change in volume is approximately 163.3 mL when 170.0 mL of gas is cooled from 30.0 °C to 20.0 °C.
To learn more about Charles' Law - brainly.com/question/14842720
#SPJ11
for the sn2 reactions, you can see a difference in leaving groups when comparing the rate of reaction of bromobutane and which other alkyl halide? 1-chlorobutane which is the better leaving group?
The better leaving group in this comparison is bromide ion ([tex]Br^-[/tex]) from bromobutane.
The rate of reaction between bromobutane and 1-chlorobutane, bromobutane is the better leaving group due to the larger size of the bromine atom compared to chlorine. The larger size of bromine makes it easier for the leaving group to dissociate from the carbon atom, leading to a faster rate of reaction compared to 1-chlorobutane.
This is because bromide ion is a larger and more polarizable group than the chloride ion ([tex]Cl^-[/tex]) from 1-chlorobutane, which makes it more stable as a leaving group and results in a faster rate of reaction for bromobutane in [tex]SN_2[/tex] reactions.
Therefore, For the [tex]SN_2[/tex] reactions, when comparing the rate of reaction between bromobutane and 1-chlorobutane, the difference in leaving groups can be observed. Hence, The better leaving group in this comparison is bromide ion ([tex]Br^-[/tex]) from bromobutane.
To know more about bromobutane refer here :
https://brainly.com/question/26372887
#SPJ11
Aiden goes out to lunch. The bill, before tax and tip, was $13. 15. A sales tax of 5% was added on. Aiden tipped 18% on the amount after the sales tax was added. How much was the sales tax? Round to the nearest cent
The sales tax on the bill, which was $13.15, can be calculated to be $0.66 when rounded to the nearest cent. Multiplying $13.81 by 18% (0.18) gives us $2.4966 the nearest cent, the tip amount is $2.50.
To calculate the sales tax, we need to find 5% of the bill amount. The bill amount before tax is $13.15, so multiplying it by 5% (0.05) gives us $0.6575. Rounding this to the nearest cent, we get $0.66.
Next, we need to calculate the amount after the sales tax was added. This can be done by adding the sales tax amount to the original bill amount: $13.15 + $0.66 = $13.81.
Finally, to calculate the tip, we need to find 18% of the amount after the sales tax was added. Multiplying $13.81 by 18% (0.18) gives us $2.4966. Rounding this to the nearest cent, the tip amount is $2.50.
To learn more about sales tax click here : brainly.com/question/29442509
#SPJ11
A container measures 2. 50 cm x 10. 1cm x 12. 2cm. When it is full of a liquid,
it has a mass of 8501g. When it is empty, it has a mass of 682g. What is the
density of the liquid in grams per cubic centimeter?
The density of the liquid in the container is 25.45 grams per cubic centimetre which can be calculated by finding the difference in mass between the full and empty container and dividing it by the volume of the container.
To calculate the density of the liquid in the container, we need to find the difference in mass between the full and empty container. The mass of the liquid can be obtained by subtracting the mass of the empty container from the mass of the full container: 8501g - 682g = 7819g.
Next, we need to calculate the volume of the container. The volume of a rectangular container can be determined by multiplying its length, width, and height: [tex]2.50 cm * 10.1 cm * 12.2 cm = 306.95 cm^3.[/tex]
Finally, we can calculate the density by dividing the mass of the liquid by the volume of the container: [tex]7819g / 306.95 cm^3 = 25.45 g/cm^3.[/tex]
Therefore, the density of the liquid in the container is 25.45 grams per cubic centimetre.
Learn more about density of the liquid here:
https://brainly.com/question/17736639
#SPJ11
a reaction combines 64.81 g of silver nitrate with 92.67 g of potassium bromideAgNO3(aq) + KBr (aq) -> AgBr(s) + KNO3 (aq)a. How much silver bromide is formed? b. Which reactant is limiting? Which is in excess? c. How much of the excess reactant is left over? d. If the actual yield of silver bromide were 14.77 g, what was the percent yield?
a. 63.13 g of silver bromide is formed. b. Potassium bromide is limiting, and silver nitrate is in excess. c. 0.56 g of potassium bromide is left over. d. The percent yield is 46.96%.
In this problem, we first need to determine which reactant is limiting and which one is in excess. To do this, we can calculate the amount of product that each reactant would produce if it were completely consumed. The reactant that produces less product is the limiting reactant, and the other reactant is in excess.
In this case, using the molar masses of the reactants and the stoichiometry of the balanced chemical equation, we find that silver nitrate would produce 108.22 g of silver bromide, while potassium bromide would produce only 63.13 g. Therefore, potassium bromide is limiting, and silver nitrate is in excess.
To determine the amount of excess reactant left over, we can use the amount of limiting reactant consumed in the reaction to calculate the amount of product formed, and then subtract this from the total amount of product formed. In this case, 29.12 g of potassium bromide is consumed, producing 63.13 g of silver bromide. Therefore, 92.67 g - 29.12 g = 63.55 g of potassium bromide is in excess, and 63.55 g - 63.13 g = 0.42 g of potassium bromide is left over.
Finally, to calculate the percent yield, we can divide the actual yield (14.77 g) by the theoretical yield (63.13 g) and multiply by 100%. This gives us a percent yield of 23.41%, but we need to divide by the stoichiometric coefficient of silver bromide (1) to get the percent yield based on silver bromide. Therefore, the percent yield based on silver bromide is 23.41%/1 = 23.41%. The percent yield based on silver nitrate or potassium bromide would be different, but they are not relevant for this problem.
learn more about bromide here:
https://brainly.com/question/13148281
#SPJ11
for a particular reaction at 164.4 °c, δ=−833.32 kj , and δ=866.05 j/k . calculate δ for this reaction at −79.0 °c.
The enthalpy change(δH) for the reaction at -79.0 °C is -769.98 kJ.
To solve this problem, we will use the following equation:
ΔH = ΔH° + CpΔT
where ΔH is the enthalpy change at the new temperature,
ΔH° is the enthalpy change at the standard temperature (in this case, 164.4 °C),
Cp is the heat capacity of the system,
ΔT is the difference in temperature.
δH = -833.32 kJ = -833,320 J
δH° = 866.05 J/K
Calculating the heat capacity, Cp:
Cp = (ΔH - ΔH°) / ΔT
Cp = (-833,320 J - 866.05 J/K x 164.4 K) / (164.4 - (-79.0)K)
Cp = -834,186.58 J/K
Use the same equation to find the enthalpy change at the new temperature:
ΔH = ΔH° + CpΔT
ΔH = -833,320 J + (-834,186.58 J/K x (-79.0 - 164.4))
ΔH = -769,982.69 J
Convert this value back to the original units:
δ = ΔH / 1000 = -769.98 kJ
Therefore, the reaction's enthalpy change at -79.0 °C is -769.98 kJ.
To learn more about enthalpy change visit:
https://brainly.com/question/24180470
#SPJ11
What is the correct name for FeO?a. iron oxideb. iron(II) oxidec. iron(III) oxided. iron monoxidee. iron(I) oxide
The correct name for FeO is iron(II) oxide. Iron(II) oxide indicates that the iron ion in the compound has a +2 oxidation state.
The formula FeO consists of one iron atom with a +2 charge and one oxygen atom with a -2 charge. Therefore, the Roman numeral (II) is used to denote the oxidation state of iron.
Iron(II) oxide is commonly known as ferrous oxide. It is a black, powdery substance that occurs naturally as the mineral wüstite. It is used in various applications, including as a pigment in ceramics and as a catalyst in chemical reactions. Iron(II) oxide can also be produced by the reduction of iron(III) oxide with carbon monoxide at high temperatures.
It's worth noting that iron(III) oxide (Fe2O3) is another common iron oxide, commonly known as ferric oxide or rust. Iron monoxide (FeO) is not an accurate name for the compound since it implies a single atom of oxygen, which is not the case. Similarly, iron(I) oxide does not represent the correct oxidation state for iron in FeO.
Learn more about FeO here:
https://brainly.com/question/14040243
#SPJ11
between ethanoic acid, methanoic acid, and pentanoic acid, the most soluble of these compounds is . this is due to its .
The most soluble of these compounds is methanoic acid. This is due to its smaller molecular size and ability to form stronger hydrogen bonds with water molecules compared to ethanoic acid and pentanoic acid.
Methanoic acid has only one carbon atom and a carboxylic acid functional group, allowing it to readily interact with water molecules through hydrogen bonding. Ethanoic acid has a longer carbon chain and a weaker hydrogen bonding ability, while pentanoic acid has an even longer carbon chain and is less soluble due to its large molecular size.
In addition, the smaller size of methanoic acid allows it to dissolve more easily in water and form a more stable solution due to its ability to interact more closely with water molecules, leading to higher solubility compared to the other two acids.
To know more about the methanoic acid refer here :
https://brainly.com/question/29587812#
#SPJ11
The complex ion NiCl4 ^2- has two unpaired electrons, whereas Ni(CN)4^2- is diamagnetic. propose structures for these two complex ions.
The complex ion NiCl₄²⁻ has a tetrahedral structure with two unpaired electrons, while Ni(CN)₄²⁻ has a square planar structure and is diamagnetic.
The NiCl₄²⁻ complex ion has a tetrahedral structure with four chloride ions surrounding a central nickel ion. Each chloride ion donates a lone pair of electrons to the nickel ion, forming four coordinate bonds. Since nickel has two electrons in its d-orbitals that are unpaired, the complex ion has a magnetic moment and is paramagnetic.
On the other hand, the Ni(CN)₄²⁻ complex ion has a square planar structure with four cyanide ions surrounding a central nickel ion. Each cyanide ion donates a lone pair of electrons to the nickel ion, forming four coordinate bonds. The nickel ion is in the d⁸ configuration, which means that all of its d-orbitals are filled. Since there are no unpaired electrons, the complex ion has no magnetic moment and is diamagnetic.
In summary, the presence or absence of unpaired electrons in a complex ion depends on the number of electrons in the d-orbitals of the central metal ion and the geometry of the surrounding ligands.
learn more about tetrahedral structure here:
https://brainly.com/question/2108211
#SPJ11
What is the total change in enthalpy of this reaction?
A. 25 kJ
B. 30 kJ
C. 35 kJ
D. 55 kJ
To determine the total change in enthalpy of a reaction, we need to examine the enthalpy values of the reactants and products and consider their stoichiometric coefficients. Without specific information about the reaction, it is not possible to provide an exact answer from the given options (A, B, C, or D). The total change in enthalpy depends on the specific reaction and the enthalpy values associated with it.
The total change in enthalpy of a reaction, denoted as ΔH, is influenced by the enthalpy values of the reactants and products. It is calculated by subtracting the sum of the enthalpy values of the reactants from the sum of the enthalpy values of the products, considering their stoichiometric coefficients.
However, without specific information about the reaction or enthalpy values associated with it, it is not possible to determine the total change in enthalpy from the given options (A, B, C, or D). The values provided (25 kJ, 30 kJ, 35 kJ, and 55 kJ) are arbitrary and do not correspond to a specific reaction.
To accurately determine the total change in enthalpy, the specific reaction and corresponding enthalpy values need to be provided.
To learn more about Stoichiometric coefficients - brainly.com/question/32563206
#SPJ11
how many moles of h2o are required to form 1.6 l of o2 at a temperature of 321 k and a pressure of 0.993 atm ?
The amount of H₂O required to form 1.6 L of O₂ at a temperature of 321 K and a pressure of 0.993 atm is 0.0807 moles.
We can use the ideal gas law to calculate the amount of O₂ in moles:
PV = nRT
n = PV/RT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant (0.08206 L atm/mol K), and T is the temperature in Kelvin.
n(O₂) = (0.993 atm)(1.6 L)/(0.08206 L atm/mol K)(321 K) ≈ 0.0657 mol
The balanced chemical equation for the reaction of H₂O and O₂ is:
2H₂O + O₂ → 2H₂O
We can see that for every mole of O₂, we need 2 moles of H₂O. Therefore, the number of moles of H₂O required is:
n(H₂O) = 2n(O₂) = 2(0.0657 mol) ≈ 0.1314 mol
However, this is the amount of H₂O required under standard conditions (0°C and 1 atm). To calculate the amount required under the given conditions, we need to use the combined gas law:
(P₁V₁/T₁)(T₂/P₂) = P₂V₂/T₂
where the subscripts 1 and 2 refer to the initial and final conditions, respectively.
Rearranging and solving for V₁, we get:
V₁ = (P₁V₂T₁)/(P₂T₂) = (1 atm)(1.6 L)(321 K)/(0.993 atm)(273 K) ≈ 5.24 L
So the amount of H₂O required under the given conditions is:
n(H₂O) = 2n(O₂) = 2(0.0657 mol)(1.6 L/5.24 L) ≈ 0.0807 mol
learn more about ideal gas law here:
https://brainly.com/question/30458409
#SPJ11
3.00 moles of an ideal gas at 230k and 150 kpa is subjected to isothermal compression and its entropy decreases by 15.0 j/k. what is the pressure of the gas after the compression is finished?
The pressure of the gas after the compression is finished is 147.4 kPa.
To solve this problem, we will need to use the ideal gas law and the second law of thermodynamics. The ideal gas law relates pressure, volume, temperature, and number of moles of an ideal gas. It is given by PV = nRT, where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature.
The second law of thermodynamics states that the entropy of an isolated system always increases or remains constant. In this problem, the entropy of the gas decreases by 15.0 J/K. This means that the gas is not an isolated system, and work must be done on the gas to decrease its entropy.
Since the gas is undergoing isothermal compression, its temperature remains constant at 230 K. Therefore, we can use the ideal gas law to relate the initial and final pressures of the gas:
(P_initial)(V_initial) = (nRT)/(T) = (3.00 mol)(8.31 J/mol·K)(230 K)/(1 atm) = 5596.1 L·atm
The final volume of the gas is not given, but since the temperature remains constant, the gas is compressed isothermally, meaning that the product of pressure and volume remains constant. We can use this fact and the change in entropy to find the final pressure:
(P_final)(V_final) = (P_initial)(V_initial) = 5596.1 L·atm
The change in entropy is given by ΔS = -Q/T, where Q is the heat added to or removed from the system and T is the temperature. In this case, since the temperature is constant, we can write ΔS = -W/T, where W is the work done on the gas. The work done on the gas is given by W = -PΔV, where ΔV is the change in volume. Since the gas is compressed, ΔV is negative, so the work done on the gas is positive:
ΔS = -W/T = (15.0 J/K) = PΔV/T = (P_final - P_initial)(-V_initial)/T
Solving for P_final, we get:
P_final = P_initial - ΔS(T/V_initial) = 150 kPa - (15.0 J/K)(230 K)/(5596.1 L) = 147.4 kPa
For more such questions on compression
https://brainly.com/question/29320737
#SPJ11
at what temperature does 0.028900 moles of ne in a 892.6 ml container exert a pressure of 0.870 atm?
At a temperature of 89.9 Kelvin, 0.028900 moles of Ne in a 892.6 ml container will exert a pressure of 0.870 atm.
To answer this question, we will need to use the Ideal Gas Law equation:
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the volume to liters by dividing by 1000:
892.6 ml = 0.8926 L
Next, we can rearrange the Ideal Gas Law equation to solve for temperature:
T = PV/nR
Substituting in the given values:
T = (0.870 atm)(0.8926 L) / (0.028900 mol)(0.0821 L·atm/mol·K)
Simplifying:
T = 89.9 K
Therefore, at a temperature of 89.9 Kelvin, 0.028900 moles of Ne in a 892.6 ml container will exert a pressure of 0.870 atm.
To know more about temperature visit
https://brainly.com/question/31425499
#SPJ11
how large, in cubic centimeters, is the volume of a red blood cell if the cell has a cylindrical shape with a diameter of 6 ×10−6m and a height of 2 ×10−6m
To find the volume of the red blood cell, if the cell has a cylindrical shape with a diameter of 6 ×10⁻⁶m and a height of 2 ×10⁻⁶m, we can use the formula for the volume of a cylinder, which is:
Volume = m x (radius² x height)
First, we need to convert the diameter of the cell to its radius, which is half the diameter. So the radius would be:
radius = (6 × 10⁻⁶m / 2)= 3 × 10⁻⁶m
Now we can plug in the values for radius and height into the formula and solve for the volume:
Volume = п x (3 × 10⁻⁶m)² × 2 × 10⁻⁶m
Volume = 56.55 × 10⁻¹⁸ m³
To convert this to cubic centimetres, we can use the fact that 1 cm³ = 10⁻⁶ m³. So the volume of the red blood cell in
cubic centimeters would be:
Volume = 56.55 × 10⁻¹⁸ m³ x (1 cm³ / 10⁻⁶ m³)
Volume = 5.655 × 10⁻¹¹ cm³
Therefore, the volume of the red blood cell is approximately 5.655 × 10⁻¹¹ cubic centimetres.
for more questions on volume of red blood cell: https://brainly.com/question/30471112
#SPJ11
The volume of the red blood cell with given dimensions, in cubic centimeters, is 56.5 × 10⁻¹².
Explanation:To calculate the volume of a cylinder, we use the formula V = πr²h. Here V is the volume, r is the radius, h is the height, and π is Pi approximately equal to 3.14159. For the red blood cell, the diameter is 6 ×10⁻⁶m, which means the radius r will be half of the diameter, which is 3 ×10⁻⁶m. The height h is given as 2 ×10⁻⁶m. Insert these values into the formula results in V = π(3 ×10⁻⁶m)²(2 ×10⁻⁶m) = 56.5 × 10⁻¹⁸ cubic meters. However, the question asks us for the volume in cubic centimeters, so we must convert from cubic meters to cubic centimeters. Because 1 cubic meter equals 1×10⁶ cubic centimeters, the conversion results in V = 56.5 × 10⁻¹² cubic centimeters.
Learn more about Calculating Volume here:https://brainly.com/question/32488277
#SPJ2