Answer:
36%
Explanation:
This is the answer on edmentum/plato. Hope this helps. Jesus loves YOU!
Elena held a rock weighing 1 N in her hand. The rock has no velocity.
KE________?
KE = 0
Further explanationEnergy is the ability to do work
Energy because its motion is expressed as Kinetic energy (KE) which can be formulated as:
[tex]\large{\boxed{\bold{KE=\frac{1}{2}mv^2}}}[/tex]
So for two objects that have the same speed, the greater the mass of the object, the greater the kinetic energy
The stone in hand is in a motionless state (at rest) so that its velocity (v) = 0, so it has no kinetic energy
But this stone can have potential energy that is gained due to its height
A trucker is driving from New Jersey to California to make a delivery of couches. He forgets to adjust the pressure of his tires before his trip and end up blowing out two of his tires while driving through Arizona. Whose law does this example depict? What does this law state? Use the law to explain what happened to the tires.
Answer:
Gay-Lussac's law.
Explanation:
According to Gay-Lussac's pressure law, it states that the pressure of a given mass of gas is directly proportional to the absolute temperature of the gas, the assumption that the volume is kept constant.
Hence, the trucker's tires were blown up because they were under high pressure as he drove from New Jersey to California, as a result of this intense pressure the temperature of the air in the tires began to rise and it directly affected the pressure of the gas in the tires' tubes which also increased to a point that they ended up blowing out, obeying Gay-Lussac's law.
Which of the following is a mineral?
coal
ling
glass
brick
salt
The temperature at which a substance in its solid state melts into the same substance in a liquid is known as
Answer:
0 C
Explanation:
NEEEDDDD HELP ASAP PLZ PLZ PLZ PLZ PLZ HELP ME
Answer:
[tex]ns^2[/tex]
Explanation:
example of physical property
Answer:
Color. I thinkkk.
Phyiscal properties are defined as properties that can be measured or observed without changing the chemical nature of the substance.
Some examples of phsyical properties are:
- Color
- Density
- Volume
- Mass
- Boiling or Melting Points
When the first periodic table of the elements was published, the elements were arranged by atomic mass. Although
several elements seemed out of order, later discoveries showed the order to be correct.
Which event most likely helped the development of the periodic table?
O Scientists changed the atomic masses to better fit the pattern.
O Scientists refused to consider other ways to organize the elements.
O New technology was developed that modified the masses.
O New information changed the understanding of the atom's structure.
ANSWER ASAP
hey guys plz plz plz help me I am struggling I am in middle and struggling to answer this plz help
I have never learned how to calculate the specific heat there is a photo if u know plz answer we have a lot of people trying to figure out how to solve this and know one knows so plz if u know give it your best shot.
thank u I will most definitely appreciate it
and if u answer this correctly I will give 50 point and mark brainliest
of u are just trying to get point u rill be reported
so thanks guys.
Answer:
I've already answered this one for you. Anyway, please let me know if you have any more questions or need help!
What is the relationship between ionization energy and
electronegativity based on these cards?
Answer: here u go
Explanation:
The ionization energy can be thought of as a kind of counter property to electronegativity in the sense that a low ionization energy implies that an element readily gives electrons to a reaction, while a high electronegativity implies that an element strongly seeks to take electrons in a reaction.
Answer: Ionization energy is the energy required to remove an electron from a neutral atom in its gaseous phase.
Explanation: Conceptually, ionization energy is the opposite of electronegativity. The lower this energy is, the more readily the atom becomes a cation.
11. How many moles are in 7.14 X 10 35
molecules of 02?
Answer:
The answer is 1.186 × 10¹² molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
N = 7.14 × 10^35 molecules of O2
We have
[tex]n = \frac{7.14 \times {10}^{35} }{6.02 \times {10}^{23} } \\ [/tex]
We have the final answer as
1.186 × 10¹² molesHope this helps you
Which statement best describes insoluble substances? Insoluble substances remain the same when in water. Insoluble substances become part of the liquid substance. Water does not remain when an insoluble substance is added. Insoluble substances change from solid to liquid states.
Answer:
Insoluble substances remain the same when in water.
Explanation:
When a substance is regarded as insoluble, it means that the substance remains the same in water.
Soluble substances usually form one continuous phase with water when they are added to water (eg when salt is added to water).
However, when camphor is added to water, it does not form a single phase with water. It remains the same in the water and maintains a separate phase from the water. Hence camphor is an insoluble substance.
Analyzing a blood sample usually involves which type of separation method?
screening
distillation
centrifugation
filtration
Answer:
the answer is b
Explanation:
i just did quizz
CAN SOMEONE PLEASE HELP ME ASAP PLEASEE ANYBODY LITERALLY ANYONE OUT THERE PLEASE
Which subatomic particle can be shared between separate atoms?
Answer:
Electrons
Explanation:
Atoms can combine together and share electrons between them. Atoms that share electrons are linked to each other in a form, called a molecule that is in a lower energy state than either of the separate atoms alone.
Pls Brainliest! It would mean a lot! ;)
PLES help me for brainless
Answer:
a 1 doesn't belong
Explanation:
Gas has fast moving molecules.
Liquids have slow moving molecules.
Solids have vibrating molecules.
10.0 J of energy is required to increase the temperature of 1 g of water by 10oC. What is this value in calories? In kcal?
10 J = 2.39 cal = 2.39 x 10⁻³ kcal
Further explanationThe joule is one unit of energy. energy itself can be expressed in units such as calories, BTU, kg⋅m²s⁻²
An example of energy calculation is the calculation of heat in heat transfer
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
10 J if we convert into calories and kcal
[tex]\tt 1~J= 0.239~cal\\\\10~J=2.39~cal\\\\2.39~cal=2.39\times 10^{-3}~kcal[/tex]
Does changing the number of neutrons affect the atomic number?
Answer:
awsdxcvawsd
Explanation:
Answer:If you change the number of neutrons in an atom, you get an isotope of the same element. The addition of a neutron can make an atom radioactive. When you change the number of protons in an atom, you will change the atom from one element to a different element.
Explanation:
11. Which of the following best explains why CO2 gas is easily compressible but solid
CO2 (dry ice) is incompressible?
The molecules of CO2 gas are much closer together than
the molecules in dry ice.
The molecules of CO2 gas are much smaller than the molecules
of solid CO2
O
The molecules of solid CO2 are much closer together than
the molecules of CO2 gas.
The molecules of CO2 gas attract one another, while the
molecules of the solid CO2 repel one another.
0
Answer:
The right answer is C. The molecules of solid CO2 are much closer together than the molecules of CO2 gas.
The molecules of CO2 gas are much closer together than the molecules in dry ice. So CO2 gas is easily compressible but solid CO2 is incompressible. The correct option is A.
What is dry ice?Carbon dioxide in its solid form is known as dry ice. Because CO2 does not have a liquid state at normal atmospheric pressure and sublimates directly from the solid to the gas state, it is commonly used for temporary refrigeration.
Dry ice can be a serious hazard in a small, poorly ventilated space. When dry ice melts, it emits carbon dioxide gas.
This gas can accumulate in a small space. A person can become unconscious and, in some cases, die if there is enough carbon dioxide gas present.
CO2 gas molecules are much closer together than dry ice molecules. As a result, CO2 gas is easily compressible, but solid CO2 is not.
Thus, the correct option is A.
For more details regarding dry ice, visit:
https://brainly.com/question/13972158
#SPJ2
How is the nuclear structure of an atom similar to the non-nuclear structure?
Answer:
It has shells of protons and neutrons.
Explanation:
The nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
What is an atom?An atom consists of a central nucleus that is usually surrounded by one or more electrons.
The total number of neutrons plus protons in the same both before and after the nuclear process, although the total number of protons and the total number of neutrons may be different before and after.
Hence, the nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
Learn more about the atoms here:
https://brainly.com/question/1566330
#SPJ2
what does MA 2 means?
Answer:
Master-at-Arms Petty Officer 2nd Class. MA2. Machine Accountant Second Class (Naval Rating) Copyright 1988-2018 AcronymFinder.com, All rights reserved.
Explanation:
what is your impression of nuclear power
A skittish squirrel is climbing vertically on a tree. Its
motion is shown on the following graph of vertical
position y vs. time t.
6
5+
3
2+
1
→t(s)
2
3
4
5
6
7
8
9
What is the instantaneous speed of the squirrel at time
t=2 s?
Answer: 1
Explanation:
Answer:
-0.1
Explanation:
what happens to the particles of a substance as it's temperature increases
A brief explanation to this question: "Why are neon signs/fireworks different colors? Please help me. Do not look up internet
Answer:
when lit, the atoms of different chemical compounds inside the firework absorb energy, when the electrons fall back to lower energy levels, they give off colored light. Depending upon the chemical used, different colors are produced. neon lights or signs are glass tubes filled with neon gas. When the light is plugged in, the electrical energy causes the electrons of neon to jump to higher energy levels, when they go to lower levels, colored light is given off. The neat thing is that the neon never gets used up. The only thing that gets used up is the electricity. The electrons don't get destroyed and can be used over and over again jumping levels. Neon glows with an orange light, but you know that neon signs can be lots of different colors. The variations come when different gases other than neon are used such as argon, or krypton or when the tube is painted so that with the light produced it produces a certain color.
Explanation:
After being excited by high levels of electrical energy (as in neon signs) or heat energy, various elements and molecules will emit their own specific colors of light.
What are basis behind fireworks?Metals burn in a variety of colors. When a copper compound is lit, for example, the flame is blue-green.
Calcium burns red, while potassium burns purple. Metals are combined to produce various colors in fireworks.
The appearance of each firework is determined by the type of stars it contains, as well as the size and quantity of these pellets.
Some stars contain metal salts, which produce brilliant colors, while others contain a variety of chemical compounds that produce dazzling light effects such as strobing, sparkling, and others.
Various elements and molecules will emit their own specific colors of light after being excited by high levels of electrical energy (as in neon signs) or heat energy (as in the fireworks).
Thus, the neon signs or fireworks provide different colors.
For more details regarding fireworks, visit:
https://brainly.com/question/16737516
#SPJ2
Which is the best way to determine if an object is made of pure silver?
O Determine the solubility of the object.
O Test to see if the object is chemically reactive.
Determine the density of the object and compare the known density of pure silver.
O Compare the mass of the silver object to the mass of a piece of pure silver.
Answer:
The correct option is;
Determine the density of the object and compare the known density of pure Silver
Explanation:
The density of the object is found by finding the weight of the object, and then finding the volume (of water) the object displaces when it is immersed (in water)
The density is then fond by dividing the weighed mass by the volume the object displaces when immersed
Compare the result of the measured density with that of pure silver. If the two have density, as well as other similar physical characteristics, then the object is likely to be pure silver.
Differences in states of matter are determined by
particle type
particle arrangement
particle color
distance between particles
Answer:
particle distance
solids are tightly packed
liquids are a little farther apart
and gases are very far
how do i know if they are congruent
“Jesus came to serve. How is He calling me to serve?”
Answer:
...
Explanation:
Jakasia needed to find the volume of a plastic container in L to see if the 170 L of
solution that she had would fit inside. She knew that one side was 2.5 ft, the
height of the box was 60 cm, and width of the box was 0.8 m. Use dimensional
analysis to determine if Jakasia's solution will fit in the container.
Answer:
The solution will fit into the container.
Explanation:
The following data were obtained from the question'
Volume of solution = 170 L
Length of container (L) = 2.5 ft
Height of container (H) = 60 cm
Width of container (W) = 0.8 m
Volume of container (V) =?
Next, we shall express the length, height and breadth I the same unit of measurement. In this case, we shall all in centimetres (cm).
For the length:
1 ft = 30.48 cm
Therefore,
2.5 ft = 2.5 ft × 30.48 cm / 1 ft
2.5 ft = 76.2 cm
Thus the length is 76.2 cm
For the width:
1 m = 100 cm
Therefore,
0.8 m = 0.8 m × 100 cm / 1 m
0.8 m = 80 cm
Thus, the width of the container is 80 cm.
Next, we shall determine the volume of the container as follow:
ength of container (L) = 76. 2 cm
Height of container (H) = 60 cm
Width of container (W) = 80 cm
Volume of container (V) =?
Volume = length × width × height
Volume = 76.2 × 80 × 60
Volume = 365760 cm³
Finally, we shall convert 365760 cm³ to litre (L). This can be obtained as follow:
1000 cm³ = 1 L
Therefore,
365760 cm³ = 365760 cm³ × 1 L/ 1000 cm³
365760 cm³ = 365.76 L
Therefore, the volume of the container is 365.76 L
Since the volume of the container (i.e 365.76 L) is bigger than the volume of the solution (i.e 170 L), therefore, the solution will fit into the container.
The table below shows the average seasonal relative humidity during the summer in four locations:
Relative Humidity
Location Average Seasonal Relative Humidity (%)
A 76
B 81
C 60
D 98
Which location is most likely to experience frequent summertime storms?
Location A
Location B
Location C
Location D
Answer:
the answer is B
Explanation:
because its asking you the frequent summertime storms
hope it helps you
Answer:
b is your answer i'm sure of it :)
Explanation:
have great day :)
Is this correct?
If the temperature is below the melting point the substance is a solid
If the temperature is above the boiling point the substance is a gas
If the temperature is in between the boiling and melting points the substances a liquid.
If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.
If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.