Answer:
Organs
Explanation:
Organs such as ears which enables animals to hear, The eyes which gives vision, the nose which is responsible for smelling and perceiving odors, The skin which enables animals to feel and the taste buds which permits animals to make distinction between sweetness, bitterness, sour are collectively called the sense Organs. The nervous systems principally made of a connection of neurons allows the trasmission of signals between different body parts. The purpose served by the sense Organs and nervous systems makes it possible makes the possibility of the nervous systems working through the sense Organs possible.
Question 6
6.7 pts
A solution has a very high electrical conductivity, turns litmus paper red and has a pH of 2.0. This is most likely
a(n)
Base/Strong Electrolyte
Acid/Weak Electrolyte
Acid/Strong Electrolyte
Base/Weak Electrolyte
Next
« Previous
Answer:
Acid/String Electrolyte
Explanation:
Litmus paper turning red means it is an acidic solution. A pH of more than 7 is Base while pH of less than 7 is an acid. Since the pH is 2, less than 7, it s is an acid. Since it has a high electrical conductivity, it must be a strong Electrolyte.
2. What is peat?
the aromatic compounds that are part of coal
O a soft, spongy material that may be changed into coal
O a mixture of methane, ethane, and other gaseous hydrocarbons
a very hard, dense form of coal
Answer:
a soft, spongy material that may be changed into coal
Explanation:
How do some insects take advantage of the surface tension of water?
What types of reactions take place in hot packs and cold packs? What evidence shows that
both hot packs and cold packs experience chemical reactions? Drag and drop the text into
the correct boxes.
Answer:
reaction to cold pack: change in temperature
Evidence of a chemical reaction etc is change in composition
Explanation: composition is atoms changeing and etc, which is a chemical reacton i think. Change in temperture is alsoa chemical reaction but cold packs
Answer:
Cold pack: absorbs heat (endothermic reaction)
Hot pack: releases heat ( exothermic reaction)
Explanation:
when a cold pack/hot pack is shaken, water mixes with the chemicals in the outer layer and reacts to release or absorb heat.
BONUS QUESTION - It takes 194 mL of a 0.5 M NaOH solution to neutralize 300
mL of an HCl solution. What is the concentration of the HCl solution? (3 pts)
NaOH + HCL » NaCl + H,O
Answer:
1.7 mol/dm3
Explanation:
working out in the image
Increasing the surface area between solute and solvent Select one: a. has no effect on the rate of dissolution. b. decreases the rate of dissolution. c. can increase, decrease, or have no effect on the rate of dissolution. d. increases the rate of dissolution.
Increasing the surface area between solute and solvent, increases the rate of dissolution.
What is rate?Rate of any process will gives idea about the speed of the completion of that happening process.
Dissolution is a process in which solute particles gets dissolve in the solvent medium. If we increases the surface area of any one medium of the solution like solute or solvent then the rate of dissolution increases, as it increases the space to get attracted to each other.
Hence, option (d) is correct.
To know more about dissolution, visit the below link:
https://brainly.com/question/1533795
How would the intensity of light from the bulb change if you were to: a) Dissolve some additional CuSO4(s) in the CuSO4 solution?
Answer:
The intensity of the light bulb increases
Explanation:
The conductivity of a solution depends on the concentration of ions in solution. This implies that, if the concentration of ions in solution is increased, the conductivity of the solution increases accordingly.
If we add more CuSO4(s) to the CuSO4 solution, the concentration of ions in the solution and consequently the conductivity of the solution increases.
Therefore, the intensity of the light bulb increases.
A sample of gas at 53.0 oC and 1.19 atm occupies a volume of 2.3 L. What volume would this gas occupy at 107 oC and 0.60 atm?
Answer:
[tex]V_2=5.32L[/tex]
Explanation:
Hello there!
In this case, according to the given pressure, temperature and volume, it is possible for us to calculate the final volume via the combined ideal gas law:
[tex]\frac{P_2V_2}{T_2}=\frac{P_1V_1}{T_1}[/tex]
In such a way, we solve for the final volume, V2, to obtain:
[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]
Then, we plug in the given data to obtain:
[tex]V_2=\frac{1.19atm*2.3L*380K}{326K*0.60atm}\\\\V_2=5.32L[/tex]
Regards!
London dispersion forces decrease with increasing number of electrons decreasing number of electrons
Answer:
Increasing number of electrons
Explanation:
London dispersion forces are intermolecular forces that occur due to momentary shifts in the electron cloud of atoms or molecules.
London dispersion forces are most commonly observed as the predominant kind of intermolecular forces in non-polar substances.
Generally, it is observed that the strength of these London dispersion forces tends to increase as the number of electrons in the substance increases.
how do you start a hypothesis in science which includes scientific words and information which is on how much sugar can dissolve in water using the temperature of the solvent which is the water?
Answer: If ... Then... Because...
Explanation: if I water this plant twice a day then it will grow 3 feet because the more water it gets the bigger it grows
Name the following hydrocarbon:
Br
Br
A. 1,3-dibromopentane
B. 2,4-dibromoethane
C. 1,3-dibromoethane
D. 2,4-dibromopentane
How many grams of CO2 are produced from 6.7 L of O2 gas at STP?
13 g CO₂
General Formulas and Concepts:Chemistry
Atomic Structure
Reading a Periodic TableMolesSTP (Standard Conditions for Temperature and Pressure) = 22.4 L per mole at 1 atm, 273 KStoichiometry
Using Dimensional AnalysisMath
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right Explanation:Step 1: Define
Identify variables
[Given] 6.7 L O₂
[Solve] g O₂
Step 2: Identify Conversions
[STP] 22.4 L = 1 mol
[PT] Molar Mass of O: 16.00 g/mol
[PT] Molar Mass of C: 12.01 g/mol
Molar Mass of CO₂: 12.01 + 2(16.00) = 44.01 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 6.7 \ L \ O_2(\frac{1 \ mol \ O_2}{22.4 \ L \ O_2})(\frac{44.01 \ g \ O_2}{1 \ mol \ O_2})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 13.1637 \ g \ O_2[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
13.1637 g CO₂ ≈ 13 g CO₂
pls help me guys please please only 1 question choose
Answer:
D.4 types of molecules is yr ans.
stay safe healthy and happy.
A sodium nitrate solution was prepared in the lab to have a concentration of 0.467 M. If 50. mL of a 6.00 M stock solution was used to prepare this sodium nitrate solution, what volume of water was added to the original 50. mL of stock solution? Provide the appropriate units (mL or L) to your response.
the treaty of versailles ended world war i, but some of the terms of the treaty contributed to the beginning of world war ii. which was one of the terms of the treaty? the answer would be "germany was forces to pay reparations to the allied countries.". i hope this .
Explanation:
1. If CO2 is being produced in the solution at a faster rate than H2CO3, is the rate of the forward or reverse reaction faster?
Answer:
I believe that it would be faster but the reaction would not happen immediately. It would take a long time for the effect to start kicking in but it will definitely speed up the process of CO2 being released into our atmosphere.
Explanation:
If CO₂ is being produced in the solution at a faster rate than H₂CO₃, then the rate of the forward reaction is faster.
What is the rate of a reaction?Rate of any reaction tells about the duration of the completion of reaction to produce products.
Given chemical reaction is written as:
H₂CO₃ ⇄ CO₂ + H₂O
In the question it is given that CO₂ is produced at the faster rate, and it is the product of the forward reaction. So, we conclude that rate of forward reaction is faster.
Hence, the rate of forward reaction is faster.
To know more about rate of a reaction, visit the below link:
https://brainly.com/question/7694417
one should know properties of constituents of a mixture to separate the mixture .Why?
Answer:
Because: The mixtures contain unwanted substances which may be harmful and may degrade the properties of mixtures. So we, need to separated them and extract useful substances.
Answer:
The composition of the mixture is very important, as a result of nature exists solely by its properties, and also the reactions may be separated.
An arrow is moving at 35 m/s and travels for 5 seconds. How far does the arrow travel eters
Answer:
175 meters
Explanation:
Applying,
v = d/s............... Equation 1
Where v = velocity of the arrow, d = distance traveled by the arrow, t = time
make d the subject of the equation
d = vt............. Equation 2
From the question,
v = 35 m/s, t = 5 seconds.
Substitute these values into equation 2
d = (35×5)
d = 175 meters.
NO FILES PLZ HELP
When a solid produced by a chemical reaction separates from the solution it is called...
a precipitate.
a molecule.
b. a reactant.
d. the mass of the product.
Answer:
a. Precipitate
Explanation:
solids can precipitate out of the solution and be left over after the reaction. reactants are incorrect because they are reacted to cause the reaction. b and d are also irrelevant terms.
What is the SUM of the coefficients for the balanced chemical equation below?
PLEASEEEE
A balloon has a volume of 1.40 L at 24.0ºC. The balloon is heated to 48.0°C. Calculate the new volume of the balloon.
A 1.50 L
B 2.10 L
C 1.70 L
D 1.80 L
Answer:I am not sure how
Explanation: sorry free trial
how could you get the crystals in a supersaturated solution back into the solution?
What are 3 examples of making diluted solutions in "regular" life?
what are examples of diluted?
Answer:
Do it your self bro
Explanation:
You lazy bum do it yourself
Which of the following will conduct electricity?
Question 9 options:
A) Acid solutions only
B) Base solutions only
C) Acid solutions and base solutions
D) Neither acid solutions nor base solutions
Answer:
I think is c
Explanation:
I hope this helps you
Answer:
Acid solutions and base solutions
Explanation:
what determines the identity of a substance?
proton
neutron
electron
photon
Answer:Typically, the identity of a substance can be described by a: chemical name, for example, benzene; number, for example, EC number 200-753-7, and.
Explanation:chemical composition, for example, >99 % benzene and <1 % toluene. The composition is determined by chemical analysis.
Answer:
proton
Explanation:
thats what my bio teacher just said
In which type of biochemical are amino acids found?
Hemoglobin
Olive oil
Potato starch
DNA
Answer: Hemoglobin
Explanation: Got it on the test
In Hemoglobin amino acids are found.
What is Amino Acid ?
Amino acids are the organic compounds that comprises functional groups like amine [tex](-NH_{2})[/tex] and carboxyl (-COOH). It combines to form the proteins. Amino acids are known building components of proteins.
How to identify a Amino acidAmino acids have
a amino groupa carboxyl group a hydrogenan R-group.Now check all the options one by one:
Option (A): A Hemoglobin molecules consist of oligoprotein. It has 4 polypeptide chain which contain 2 alpha chain which contains 141 amino acid and 2 beta chain which contain 146 amino acid. Glutamine, valine and serine are the amino acids which is required for Hemoglobin. So it is correct option.
Option (B): Olive oil mainly contained fatty acids which are monosaturated. So it is incorrect option.
Option(C): Potato starch contains only starch. It forms a complex carbohydrate. So it is incorrect option.
Option (D): In DNA hydrogen bonds are present not peptide bond. So it is incorrect option.
Thus, we can say that In Hemoglobin amino acids are found.
Learn more about the Amino acids here: https://brainly.com/question/3535479
#SPJ2
How many moles of Fe₂O₃ are there in 0.54 liters of a 1.6 M solution?
Answer: 0.86 mol
This is a molarity problem, in which M is defined by:
[tex]\frac{n(moles of solute)}{v(liters of solution)}[/tex]and the units are moles/liter
With this information in mind, we can plug in M and v already so that:
1.6 [tex]\frac{mol}{L}[/tex]= [tex]\frac{xmol}{0.54L}[/tex] of Fe₂O₃
If we multiply 0.54 L from both sides, we will get:
0.864 mol = x mol of Fe₂O₃
Rounding that to sigfigs, we get that the number of moles within this Fe₂O₃ solution is 0.86 mol; therefore, that is the answer.
I hope this helped!
Which organism in a food web would be best described as a recycler?
O A.
Cottontail rabbit
B.
Termite
C.
Fungi and bacteria
D.
Red fox
C,
takes dead things, makes them into other things
A standard lanthanum solution is prepared by dissolving 0.1968 grams of lanthanum oxide (La2O3) in excess nitric acid and diluting to one liter in a volumetric flask. Calculate the concentration of the solution expressed as molarity of lanthanum nitrate and as ppm lanthanum.
Answer:
1.208x10⁻³M and 392.5ppm La(NO3)3
Explanation:
The reaction that occurs is:
La2O3 + 6HNO3 → 2La(NO3)3 + 3H2O
Molarity is defined as the moles of solute (In this case, LaO3) per liter of solution. And ppm, are mg of solute per liter of solution.
To solve this question we must find the moles of La(NO3)3 produced and its mass in milligrams to find molarity and ppm:
Moles La2O3 -Molar mass: 325.81g/mol-
0.1968g * (1mol / 325.81g) = 6.04x10⁻⁴ moles La2O3
Moles La(NO3)3:
6.04x10⁻⁴ moles La2O3 * (2mol La(NO3)3 / 1mol La2O3) = 1.208x10⁻³ moles La(NO3)3
Molarity:
1.208x10⁻³ moles La(NO3)3 / 1L =
1.208x10⁻³MMass La(NO3)3 -Molar mass: 324.92g/mol-
1.208x10⁻³ moles La(NO3)3 * (324.92g / mol) = 0.392.5g La(NO3)3
In mg:
392.5mg La(NO3)3 / 1L =
392.5ppm La(NO3)3
calculate the ph of a solution having [OH-] = 8.2 x 10 ^-8M
Answer:
6.91Explanation:
To find the pH we must first find the pOH
The pOH can be found by using the formula
pOH = - log [ {OH}^{-} ]
We have
[tex]pOH = - log(8.2 \times {10}^{ - 8} ) \\ = 7.086186...[/tex]
pOH = 7.09
Next we use the equation
pH = 14 - pOH
We have
pH = 14 - 7.09
We have the final answer as
6.91Hope this helps you
Part B
DIRECTIONS: Identify the type of heat transfer depicted in each picture by arranging the
jumbled letters and answer the questions that follows.
Answer:
1. conduction
2. Convection
3. Radiation