Answer:
E = 0.965eV
Explanation:
In order to calculate the minimum energy needed to eject the electrons you use the following formula:
[tex]E=h \nu[/tex] (1)
h: Planck' constant = 6.626*10^{-34}J.s
v: threshold frequency = 2.47*10^14 s^-1
You replace the values of v and h in the equation (1):
[tex]E=(6.262*10^{-34}J.s)(2.47*10^{14}s^{-1})=1.54*10^{-19}J[/tex]
In electron volts you obtain:
[tex]1.54*10^{-19}J*\frac{6.242*10^{18}eV}{1J}=0.965eV[/tex]
The minimum energy needed is 0.965eV
A 300 g bird flying along at 6.2 m/s sees a 10 g insect heading straight toward it with a speed of 35 m/s (as measured by an observer on the ground, not by the bird). The bird opens its mouth wide and enjoys a nice lunch.
Required:
What is the bird's speed immediately after swallowing?
Answer:
The velocity of the bird is [tex]v_f = 4.87 \ m/s[/tex]
Explanation:
From the question we are told that
The mass of the bird is [tex]m_1 = 300 \ g = 0.3 \ kg[/tex]
The initial speed of the bird is [tex]u_1 = 6.2 \ m/s[/tex]
The mass of the insect is [tex]m_2 = 10 \ g = 0.01 \ kg[/tex]
The speed of the insect is [tex]u_ 2 =-35 \ m/s[/tex]
The negative sign is because it is moving in opposite direction to the bird
According to the principle of linear momentum conservation
[tex]m_1 u_1 + m_2 u_2 = (m_1 + m_2 )v_f[/tex]
substituting values
[tex](0.3 * 6.2 ) + (0.01 * (-35)) = (0.3 + 0.01 )v_f[/tex]
[tex]1.51 = 0.31 v_f[/tex]
[tex]v_f = 4.87 \ m/s[/tex]
The Final velocity of Bird = 4.87 m/s
Mass of the bird = 300 g = 0.3 kg
Velocity of bird = 6.2 m/s
Momentum of Bird = Mass of bird [tex]\times[/tex] Velocity of Bird = 0.3 [tex]\times[/tex] 6.2 = 1.86 kgm/s
Mass of the insect = 10 g = 0.01 kg
Velocity of insect = - 35 m/s
Momentum of the Insect = Mass of Insect [tex]\times[/tex] Velocity of Insect = - 0.35 kgm/s
According to the law of conservation of momentum We can write that
In the absence of external forces on the system , the momentum of system remains conserved in that particular direction.
The bird opens the mouth and enjoys the free lunch hence
Let the final velocity of bird is [tex]v_f[/tex]
Initial momentum of the system = Final momentum of the system
1.86 -0.35 = [tex]v_f[/tex] ( 0.01 + 0.3 )
1.51 = [tex]v_f[/tex] 0.31
[tex]v_f[/tex] = 4.87 m/s
The Final velocity of Bird = 4.87 m/s
For more information please refer to the link below
https://brainly.com/question/18066930
Three blocks are placed in contact on a horizontal frictionless surface. A constant force of magnitude F is applied to the box of mass M. There is friction between the surfaces of blocks 2M and 3M so the three blocks accelerate together to the right.
Which block has the smallest net force acting on it?
A) M
B) 2M
C) 3M
D) The net force is the same for all three blocks Submit
Answer:
A) M
Explanation:
The three blocks are set in series on a horizontal frictionless surface, whose mutual contact accelerates all system to the same value due to internal forces as response to external force exerted on the box of mass M (Newton's Third Law). Let be F the external force, and F' and F'' the internal forces between boxes of masses M and 2M, as well as between boxes of masses 2M and 3M. The equations of equilibrium of each box are described below:
Box with mass M
[tex]\Sigma F = F - F' = M\cdot a[/tex]
Box with mass 2M
[tex]\Sigma F = F' - F'' = 2\cdot M \cdot a[/tex]
Box with mass 3M
[tex]\Sigma F = F'' = 3\cdot M \cdot a[/tex]
On the third equation, acceleration can be modelled in terms of F'':
[tex]a = \frac{F''}{3\cdot M}[/tex]
An expression for F' can be deducted from the second equation by replacing F'' and clearing the respective variable.
[tex]F' = 2\cdot M \cdot a + F''[/tex]
[tex]F' = 2\cdot M \cdot \left(\frac{F''}{3\cdot M} \right) + F''[/tex]
[tex]F' = \frac{5}{3}\cdot F''[/tex]
Finally, F'' can be calculated in terms of the external force by replacing F' on the first equation:
[tex]F - \frac{5}{3}\cdot F'' = M \cdot \left(\frac{F''}{3\cdot M} \right)[/tex]
[tex]F = \frac{5}{3} \cdot F'' + \frac{1}{3}\cdot F''[/tex]
[tex]F = 2\cdot F''[/tex]
[tex]F'' = \frac{1}{2}\cdot F[/tex]
Afterwards, F' as function of the external force can be obtained by direct substitution:
[tex]F' = \frac{5}{6}\cdot F[/tex]
The net forces of each block are now calculated:
Box with mass M
[tex]M\cdot a = F - \frac{5}{6}\cdot F[/tex]
[tex]M\cdot a = \frac{1}{6}\cdot F[/tex]
Box with mass 2M
[tex]2\cdot M\cdot a = \frac{5}{6}\cdot F - \frac{1}{2}\cdot F[/tex]
[tex]2\cdot M \cdot a = \frac{1}{3}\cdot F[/tex]
Box with mass 3M
[tex]3\cdot M \cdot a = \frac{1}{2}\cdot F[/tex]
As a conclusion, the box with mass M experiments the smallest net force acting on it, which corresponds with answer A.
a cannon is fired with an initial horizontal velocity of 20m/s and an initial velocity of 25m/s. After 3s in the air, the cannon hits its target. How far away(in meters) was the cannon from its target
Answer:
60 m
Explanation:
After 3 seconds of travel at 20 m/s, the projectile is 3·20 = 60 meters horizontally from the cannon.
__
The vertical height after 3 seconds is 0.9 m, so the straight-line distance from cannon to target is √(60^2 +0.9^2) ≈ 60.007 meters.
A wire with mass 90.0g is stretched so that its ends are tied down at points 88.0cm apart. The wire vibrates in its fundamental mode with frequency 80.0Hz and with an amplitude of 0.600cm at the antinodes.a) What is the speed of propagation of transverse waves in the wire?b) Compute the tension in the wire.
Answer:
a) V = 140.8 m/s
b) T = 2027.52 N = 2.03 KN
Explanation:
a)
The formula for the speed of the wave is given as follows:
f₁ = V/2L
V = 2f₁L
where,
V = Speed of Wave = ?
f₁ = Fundamental Frequency = 80 Hz
L = Length of Wire = 88 cm = 0.88 m
Therefore,
V = (2)(80 Hz)(0.88 m)
V = 140.8 m/s
b)
Another formula for the speed of wave is:
V = √T/μ
V² = T/μ
T = V²μ
where,
T = Tension in String = ?
μ = Linear Mass Density of Wire = Mass of Wire/L = 0.09 kg/0.88 m
μ = 0.1 kg/m
Therefore,
T = (140.8 m/s)²(0.1 kg/m)
T = 2027.52 N = 2.03 KN
New evidence increasingly emphasizes that __________.
A ray in glass (n = 1.51) reaches a boundary with air at 49.2 deg. Does it reflect internally or refract into the air? Enter 0 for reflect, and 1 for refract.
Answer:
0 - Then, the ray is totally reflected
Explanation:
The ray reaches the boundary between the two mediums at 49.2°.
If the ray is totally reflected it is necessary that the crictical angle is lower that the incidet angle.
You use the following to calculate the critical angle:
[tex]\theta_c=sin^{-1}(\frac{n_2}{n_1})[/tex] (1)
n2: index of refraction of the second medium (air) = 1.00
n1: index of refraction of the first medium (glass) = 1.51
You replace the values of the parameters in the equation (1):
[tex]\theta_c=sin^{-1}(\frac{1.00}{1.51})=41.47\°[/tex]
The critical angle is 41.47°, which is lower than the incident angle 49.2°.
Then, the ray is totally reflected.
0
When using a mercury barometer , the vapor pressure of mercury is usually assumed to be zero. At room temperature mercury's vapor pressure is about 0.0015 mm-Hg. At sea level, the height hhh of mercury in a barometer is about 760 mm.Required:a. If the vapor pressure of mercury is neglected, is the true atmospheric pressure greater or less than the value read from the barometer? b. What is the percent error? c. What is the percent error if you use a water barometer and ignore water's saturated vapor pressure at STP?
Answer:
Explanation:
(a)
The true atmospheric pressure will has more value than the reading in the barometer. If Parm is the atmospheric
pressure in the tube then the resulting vapour pressure is
Patm - pgh = Prapor
The final reading ion the barometer is
pgh = Palm - Proper
Hence, the true atmospheric pressure is greater.
you can find the answer in this book
physics principles with Applications, Global Edition Problem 67P: Chapter: CH 13 Problem:67p
How many diffraction maxima are contained in a region of the Fraunhofer single-slit pattern, subtending an angle of 2.12°, for a slit width of 0.110 mm, using light of wavelength 582 nm?
Answer:
6
Explanation:
We are given that
[tex]\theta=2.12^{\circ}[/tex]
Slid width,a=0.110 mm=[tex]0.11\times 10^{-3} m[/tex]
[tex]1mm=10^{-3} m[/tex]
Wavelength,[tex]\lambda=582 nm=582\times 10^{-9}[/tex] m
[tex]1nm=10^{-9} m[/tex]
We have to find the number of diffraction maxima are contained in a region of the Fraunhofer single-slit pattern.
[tex]asin\theta=\frac{2N+1}{2}\lambda[/tex]
Using the formula
[tex]0.11\times 10^{-3}sin(2.12)=\frac{2N+1}{2}(582\times 10^{-9})[/tex]
[tex]2N+1=\frac{0.11\times 10^{-3}sin(2.12)\times 2}{582\times 10^{-9}}[/tex]
[tex]2N+1=13.98[/tex]
[tex]2N=13.98-1=12.98[/tex]
[tex]N=\frac{12.98}{2}\approx 6[/tex]
Hence, 6 diffraction maxima are contained in a region of the Fraunhofer single-slit pattern
A car travels 2500 m in 8 minutes. Calculate the speed at which the car travelled
Answer:
5.95m/s to 2 decimal places
Explanation:
In physics speed is measured in metres per second so convert 8mins to seconds
8x60=420 seconds
The formula needed:
Speed (m/s)= Distance (m)/Time (s)
2500/420=5.95m/s
A disk between vertebrae in the spine is subjected to a shearing force of 640 N. Find its shear deformation taking it to have the shear modulus of 1.00 109 N/m2. The disk is equivalent to a solid cylinder 0.700 cm high and 4.30 cm in diameter.
Answer:
3.08*10^-6 m
Explanation:
Given that
Total shearing force, F = 640 N
Shear modulus, S = 1*10^9 N/m²
Height of the cylinder, L = 0.7 cm
Diameter of the cylinder, d = 4.3 cm
The solution is attached below.
We have our shear deformation to be 3.08*10^-6 m
A particle leaves the origin with a speed of 3 106 m/s at 38 degrees to the positive x axis. It moves in a uniform electric field directed along positive y axis. Find Ey such that the particle will cross the x axis at x
Answer:
If the particle is an electron [tex]E_y = 3.311 * 10^3 N/C[/tex]
If the particle is a proton, [tex]E_y = 6.08 * 10^6 N/C[/tex]
Explanation:
Initial speed at the origin, [tex]u = 3 * 10^6 m/s[/tex]
[tex]\theta = 38^0[/tex] to +ve x-axis
The particle crosses the x-axis at , x = 1.5 cm = 0.015 m
The particle can either be an electron or a proton:
Mass of an electron, [tex]m_e = 9.1 * 10^{-31} kg[/tex]
Mass of a proton, [tex]m_p = 1.67 * 10^{-27} kg[/tex]
The electric field intensity along the positive y axis [tex]E_y[/tex], can be given by the formula:
[tex]E_y = \frac{2 m u^2 sin \theta cos \theta}{qx} \\[/tex]
If the particle is an electron:
[tex]E_y = \frac{2 m_e u^2 sin \theta cos \theta}{qx} \\[/tex]
[tex]E_y = \frac{2 * 9.1 * 10^{-31} * (3*10^6)^2 *(sin38)( cos38)}{1.6*10^{-19} * 0.015} \\[/tex]
[tex]E_y = 3311.13 N/C\\E_y = 3.311 * 10^3 N/C[/tex]
If the particle is a proton:
[tex]E_y = \frac{2 m_p u^2 sin \theta cos \theta}{qx} \\[/tex]
[tex]E_y = \frac{2 * 1.67 * 10^{-27} * (3*10^6)^2 *(sin38)( cos38)}{1.6*10^{-19} * 0.015} \\[/tex]
[tex]E_y = 6.08 * 10^6 N/C[/tex]
A bicycle rider has a speed of 20.0 m/s at a height of 60 m above sea level when he begins coasting down hill. Sea level is the zero level for measuring gravitational potential energy. Ignoring friction and air resistance, what is the rider's speed when he coasts to a height of 18 m above sea level?
Answer:
The rider's speed will be approximately 35 m/s
Explanation:
Initially the rider has kinetic and potential energy, and after going down the hill, some of the potencial energy turns into kinetic energy. So using the conservation of energy, we have that:
[tex]kinetic_1 + potencial_1 = kinetic_2 + potencial_2[/tex]
The kinetic and potencial energy are given by:
[tex]kinetic = mass * speed^2 / 2[/tex]
[tex]potencial = mass * gravity * height[/tex]
So we have that:
[tex]m*v^2/2 + mgh = m*v'^2/2 + mgh'[/tex]
[tex]20^2/2 + 9.81*60 = v'^2/2 + 9.81*18[/tex]
[tex]v'^2/2 + 176.58 = 788.6[/tex]
[tex]v'^2/2 = 612.02[/tex]
[tex]v'^2 = 1224.04[/tex]
[tex]v' = 34.99\ m/s[/tex]
So the rider's speed will be approximately 35 m/s
What will happen to an astronaut when the jets produce these four forces
An alternative to CFL bulbs and incandescent bulbs are light-emitting diode (LED) bulbs. A 60 W incandescent bulb can be replaced by a 12 W LED bulb. Both produce 800 lumens of light. Assuming the cost of electricity is $0.29 per kilowatt-hour, how much does it cost (in dollars) to run the LED bulb for one year if it runs for four hours a day?
Answer:
C = $5.08
it costs $5.08 to run the LED bulb for one year if it runs for four hours a day
Explanation:
Given;
Power of Led bulb P = 12 W
Rate r = $0.29 per kilowatt-hour
Time = 4 hours per day
The number of hours used in a year is;
time t = 4 hours per day × 365 days per year
t = 1460 hours
The energy consumption of Led bulb in a year is;
E = Pt
E = 12 W × 1460 hours
E = 17520 watts hour
E = 17.52 kilowatt-hour
The cost of the energy consumption is;
C = E × rate = Er
C = 17.52 × $0.29
C = $5.08
it costs $5.08 to run the LED bulb for one year if it runs for four hours a day
A wire carries a current of 4 A travelling to the left (-x direction). It is placed in a constant magnetic field of magnitude 0.05 T, pointing upward ( z direction). a. If 25 cm of the wire is in the magnetic field, what is the force on the current
Answer:
0.05 N
Explanation:
Data provided in the question
The Wire carries a current of 4A to the left direction
The constant magnetic field of magnitude = 0.05 T
Pointing upward i.e Z direction
The wire is in the magnetic field = 25 cm
Based on the above information, the force on the current is
[tex]= Current \times constant\ magnetic\ field\ of\ magnitude \times magnetic\ field[/tex]
[tex]= 4 \times 0.05 \times 0.25[/tex]
= 0.05 N
The direction will be the negative Y direction
From a height of 40.0 m, a 1.00 kg bird dives (from rest) into a small fish tank containing 50.5 kg of water. Part A What is the maximum rise in temperature of the water if the bird gives it all of its mechanical energy
Answer:
0.00185 °C
Explanation:
From the question,
The potential energy of the bird = heat gained by the water in the fish tank.
mgh = cm'(Δt)................... Equation 1
Where m = mass of the bird, g = acceleration due to gravity, h = height, c = specific heat capacity of water, m' = mass of water, Δt = rise in temperature of water.
make Δt the subject of the equation
Δt = mgh/cm'............... Equation 2
Given: m = 1 kg, h = 40 m, m' = 50.5 kg
constant: g = 9.8 m/s², c = 4200 J/kg.K
Substitute into equation 2
Δt = 1(40)(9.8)/(50.5×4200)
Δt = 392/212100
Δt = 0.00185 °C
A Young's interference experiment is performed with blue-green laser light. The separation between the slits is 0.500 mm, and the screen is located 3.24 m from the slits. The first bright fringe is located 3.30 mm from the center of the interference pattern. What is the wavelength of the laser light?
Answer:
λ = 509 nm
Explanation:
In order to calculate the wavelength of the light you use the following formula:
[tex]y=m\frac{\lambda D}{d}[/tex] (1)
where
y: distance of the mth fringe to the central peak = 3.30 mm = 3.30*10^-3 m
m: order of the bright fringe = 1
D: distance from the slits to the screen = 3.24 m
d: distance between slits = 0.500 mm = 0.500*10^-3 m
You first solve the equation (1) for λ, and then you replace the values of the other parameters:
[tex]\lambda=\frac{dy}{mD}\\\\\lambda=\frac{(0.500*10^{-3}m)(3.30*10^{-3}m)}{(1)(3.24m)}=5.09*10^7m\\\\\lambda=509*10^{-9}m=509nm[/tex]
The wavelength of the light is 509 nm
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected in series to a 12.0-V battery, the current from the battery is 1.78 A. When the resistors are connected in parallel to the battery, the total current from the battery is 11.3 A. Determine the two resistances.
Answer:
R(smaller) = 1.3 Ω and R(larger) = 5.4 Ω
Explanation:
Ohm's Law states that:
V = IR
R = V/I
where,
R = Resistance
V = Potential Difference
I = Current
Therefore, for series connection:
Rs = Vs/Is
where,
Rs = Resistance when connected in series = R(smaller) + R(larger)
Vs = Potential Difference when connected in series = 12 V
Is = Current when connected in series = 1.78 A
Therefore,
R(smaller) + R(larger) = 12 V/1.78 A
R(smaller) + R(larger) = 6.74 Ω --------------- equation 1
R(smaller) = 6.74 Ω - R(larger) --------------- equation 2
Therefore, for series connection:
Rp = Vp/Ip
where,
Rp = Resistance when connected in parallel = [1/R(smaller) + 1/R(larger)]⁻¹
Rp = [{R(smaller) + R(larger)}/{R(smaller).R(larger)]⁻¹
Rp = R(smaller).R(larger)/[R(smaller) + R(larger)]
Vp = Potential Difference when connected in parallel = 12 V
Ip = Current when connected in parallel = 11.3 A
Therefore,
R(smaller).R(larger)/[R(smaller) + R(larger)] = 12 V/11.3 A
using equation 1 and equation 2, we get:
[6.74 Ω - R(larger)].R(larger)/6.74 Ω = 1.06 Ω
6.74 R(larger) - R(larger)² = (6.74)(1.06)
R(larger)² - 6.74 R(larger) + 7.16 = 0
solving this quadratic equation we get:
R(larger) = 5.4 Ω (OR) R(larger) = 1.3 Ω
using these values in equation 2, we get:
R(smaller) = 1.3 Ω (OR) R(smaller) = 5.4 Ω
Since, it is given in the question that R(smaller)<R(larger).
Therefore, the correct answers will be:
R(smaller) = 1.3 Ω and R(larger) = 5.4 Ω
You are trying to overhear a juicy conversation, but from your distance of 25.0 m, it sounds like only an average whisper of 25.0 dB. So you decide to move closer to give the conversation a sound level of 80.0 dB instead. How close should you come?
Answer:
r₂ = 1,586 m
Explanation:
For this problem we are going to solve it by parts, let's start by finding the sound intensity when we are 25 m
β = 10 log (I / I₀)
where Io is the sensitivity threshold 10⁻¹² W / m²
I₁ / I₀ = [tex]e^{\beta/10}[/tex]
I₁ = I₀ e^{\beta/10}
let's calculate
I₁ = 10⁻¹² e^{25/10}
I₁ = 1.20 10⁻¹¹ W / m²
the other intensity in exercise is
I₂ = 10⁻¹² e^{80/10}
I₂ = 2.98 10⁻⁹ W / m²
now we use the definition of sound intensity
I = P / A
where P is the emitted power that is a constant and A the area of the sphere where the sound is distributed
P = I A
the area a sphere is
A = 4π r²
we can write this equation for two points of the found intensities
I₁ A₁ = I₂ A₂
where index 1 corresponds to 25m and index 2 to the other distance
I₁ 4π r₁² = I₂ 4π r₂²
I₁ r₁² = I₂ r₂²
r₂ = √ (I₁ / I₂) r₁
let's calculate
r₂ = √ (1.20 10⁻¹¹ / 2.98 10⁻⁹) 25
r₂ = √ (0.40268 10⁻²) 25
r₂ = 1,586 m
What is the on ohooke benden
er ord power
What is the main difference between work, power and energy
Answer:Work is the energy required to move an object from one point to another. while power is the energy transferred per unit time.
Calculate the amount of kinetic energy the car stores if it has a mass of 1200 kg and speed of 15 m/s
Answer:
KE = 135,000 j or 135 KJ
Explanation:
KE=0.5mv^2
KE=0.5*1200*15^2
KE = 135,000 joules or 135 Kilo Joules
A stationary 6-kg shell explodes into three pieces. One 4.0 kg piece moves horizontally along the negative x-axis. The other two fragments, each 1.0 kg, move in directions that make 60o angle above and below the positive x-axis and their speeds are 60 m/s each. What is the velocity of the 4.0-kg fragment
Answer:
-15 m/s
Explanation:
The computation of the velocity of the 4.0 kg fragment is shown below:
For this question, we use the correlation of the momentum along with horizontal x axis
Given that
Weight of stationary shell = 6 kg
Other two fragments each = 1.0 kg
Angle = 60
Speed = 60 m/s
Based on the above information, the velocity = v is
[tex]1\times 60 \times cos\ 60 + 1\times 60 \times cos\ 60 - 4\ v = 0[/tex]
[tex]\frac{60}{2} + \frac{60}{2} - 4\ v = 0[/tex]
[tex]v = \frac{60}{4}[/tex]
= -15 m/s
Difference between regular and irregular object.
Hope this helps....
Good luck on your assignment.....
An airplane flies between two points on the ground that are 500 km apart. The destination is directly north of the origination of the flight. The plane flies with an air speed of 120 m/s. If a constant wind blows at 10.0 m/s due west during the flight, what direction must the plane fly relative to north to arrive at the destination? Consider: east to the right, west to the left, north upwards and south downwards
Answer:
θ = 4.78º
with respect to the vertical or 4.78 to the east - north
Explanation:
This is a velocity compound exercise since it is a vector quantity.
The plane takes a direction, the air blows to the west and the result must be to the north, let's use the Pythagorean theorem to find the speed
v_fly² = v_nort² + v_air²
v_nort² = v_fly² + - v_air²
Let's use trigonometry to find the direction of the plane
sin θ = v_air / v_fly
θ = sin⁻¹ (v_air / v_fly)
let's calculate
θ = sin⁻¹ (10/120)
θ = 4.78º
with respect to the vertical or 4.78 to the north-east
A depiction of a famous scientific experiment is given. Consider how the beam changes when the magnet is off compared to when the magnet is on. A bell-shaped evacuated glass tube with a narrow end and a wide end is connected to a battery at the narrow end. In the center of the tube there is a negatively charged plate above the tube, a positively charged plate below the tube, and a magnet with the field turned off. A beam originating at the narrow end of the tube travels toward the wide end of the tube. With the magnetic field turned off, the beam path bends toward the positively charged plate and ends at the lower half of the wide end of the tube. A bell-shaped evacuated glass tube with a narrow end and a wide end is connected to a battery at the narrow end. In the center of the tube there is a negatively charged plate above the tube, a positively charged plate below the tube, and a magnet with the field turned n. A beam originating at the narrow end of the tube travels toward the wide end of the tube. With the magnetic field turned on, the beam path travels in a straight path to the center of the wide end of the tube. What type of beam was used in this experiment?
Answer:
The beam used is a negatively charged electron beam with a velocity of
v = E / B
Explanation:
After reading this long statement we can extract the data to work on the problem.
* They indicate that when the beam passes through the plates it deviates towards the positive plate, so the beam must be negative electrons.
* Now indicates that the electric field and the magnetic field are contracted and that the beam passes without deviating, so the electric and magnetic forces must be balanced
[tex]F_{e} = F_{m}[/tex]
q E = qv B
v = E / B
this configuration is called speed selector
They ask us what type of beam was used.
The beam used is a negatively charged electron beam with a velocity of v = E / B
charged particles from the solar winds ultimately cause ___. a. the earth to maintain it's magnetic field b. the earth to change shape c. the auroras d. strong winds on earth
Answer:
The auroras C.
Explanation:
Identify the following as combination, decomposition, replacement, or ion exchange reactions: Al(s) + 3 Cl2(g) → 2 AlCl3(s) Ca(OH)2(aq) + H2SO4(aq) → CaSO4(aq) + 2 H2O(l
Answer:
2 Al(s) + 3Cl₂(g) → 2AlCl₃(s)
This is a combination reaction.
Ca(OH)₂(aq) + H₂SO₄(aq) → CaSO₄(aq) + 2H₂O(l)
This is a replacement reaction.
Explanation:
A combination reaction is a reaction in which two reagents are combined into one product. The reaction has the following general form:
A + B → AB
where A and B represent any two chemical substances.
2 Al(s) + 3Cl₂(g) → 2AlCl₃(s)
This is a combination reaction because a single compound forms from two or more reacting species.
Double Substitution, Double Displacement or Metastasis Reactions are those in which two elements found in different compounds exchange their positions forming two new compounds. These chemical reactions do not present changes in the number of oxidation or relative load of the elements. So they are not considered redox reactions.
The solvent of the double displacement reactions usually is water and the reagents and products are usually ionic compounds (cations or anions are exchanged), although they can also be acids or bases.
In general, this type of reaction can be expressed as:
AB + CD ⇒ AD + CD
In the reaction:
Ca(OH)₂(aq) + H₂SO₄(aq) → CaSO₄(aq) + 2H₂O(l)
This is a replacement reaction because it is a double replacement reaction in which the ions are exchanged to form new compounds.
The planet should move around the elliptical orbit, and two segments of the orbit should become shaded in green. What aspect(s) of the orbit and shaded segments are the same?
Answer: not sure
Explanation:
The force a spring exerts on a body is a conservative force because:
a. a spring always exerts a force parallel to the displacement of the body.
b. the work a spring does on a body is equal for compressions and extensions of equal magnitude.
c. the net work a spring does on a body is zero when the body returns to its initial position.
d. the work a spring does on a body is equal and opposite for compressions and extensions of equal magnitude.
e. a spring always exerts a force opposite to the displacement of the body.
Answer:
c. the net work a spring does on a body is zero when the body returns to its initial position
Explanation:
A force is conservative when the net work done over any path that returns to the initial position is zero. Choice C matches that definition.
An ideal spring of the kind used in physics problems has the characteristic that it applies the same force at the same distance always. So any work required to extend or compress the spring is reversed when the reverse motion takes place.
Sophie throws a tennis ball down from a height of 1.5 m at an angle of 450 with respect to vertical. She drops another tennis ball from the same height. Use the Energy Interaction Model to predict which ball will hit the ground with greater speed.
Given that,
Height =1.5 m
Angle = 45°
We need to find the greater speed of the ball
Using conservation of energy
[tex]P.E_{i}+K.E_{f}=P.E_{f}+K.E_{f}[/tex]
[tex]mgh+\dfrac{1}{2}mv_{i}^2=mgh+\dfrac{1}{2}mv_{f}^2[/tex]
Here, initial velocity and final potential energy is zero.
[tex]mgh=\dfrac{1}{2}mv_{f}^2[/tex]
Put the value into the formula
[tex]9.8\times1.5=\dfrac{1}{2}v_{f}^2[/tex]
[tex]v_{f}^2=2\times9.8\times1.5[/tex]
[tex]v_{f}=\sqrt{2\times9.8\times1.5}[/tex]
[tex]v_{f}=5.42\ m/s[/tex]
Hence, the greater speed of the ball is 5.42 m/s.