The glacier given in this picture is an example of which type?

Answer:

B. aq if the reaction is inorganic (double or single displacement), neutralization, etc.

Explanation:

Hello there!

In this case, unfortunately we are not given the undergoing chemical reaction; however, in the most of the double displacement, neutralization, precipitation and in general, inorganic reactions, the hydrochloric acid must be B. aq as it must be dissolved in water as the reaction media. On the other hand, in some organic reactions, it can be either aqueous or gaseous, the latter, specially as a product. For that reason, you will need to make sure whether your reaction is organic or inorganic to correctly figure out the phase label.

Best regards!

Answer:

Explanation:

We have the three equations:

[tex]NH_{3(g)} + HCl_{(g)} => NH_4Cl_{(s)} ..... \Delta H = ? (1)\\2HCl_{(g)} => H_{2(g)} + Cl_{2(g)} .... \Delta H = +184.6 kJ (2)\\2H_{2(g)} + 1/2N_{2(g)} + 1/2Cl_{2(g)} => NH_4Cl_{(s)} ..... \Delta H = -314.2 kJ (3)\\ N_{2(g)} + 3H_{2(g)} => 2NH_{3(g)} .... \Delta H = +184.6kJ (4)[/tex]

(can you double check that it is 184.6kJ for both equations 2 and 4 because it seems unlikely). We need to solve for equation 1 by addition and changing equations 2, 3 and 4. After possibly some trial and error, we can find that if we flip equations 4, multiply equation 3 by 2, add the equations together, and then finally divide by 2, we can get equation 1. We will get the answer of -314.2 kJ. However, I am again skeptical about the delta H values for equation 2 and 4 so double check that. This method might be super confusing and it is really hard to explain. So what I would suggest you to watch videos on Hess' law.

Answer:

1)2Na + Cl2 ----> 2NaCl

2)Ca + Br2 ---->CaBr2

3)K + H2O -----> KOH + H2

Answer:

[tex]T_2=484.8K[/tex]

Explanation:

Hello there!

In this case, according to the the variable temperature and pressure and constant volume, it turns out possible for us to calculate the new temperature via the Gay-Lussac's law as shown below:

[tex]\frac{T_2}{P_2} =\frac{T_1}{P_1}[/tex]

Thus, by solving for the final temperature, T2, we obtain:

[tex]T_2 =\frac{T_1P_2}{P_1}[/tex]

So we plug in the given data to obtain:

[tex]T_2 =\frac{303K*200atm}{125atm}\\\\T_2=484.8K[/tex]

Best regards!

Answer:

A water molecule displays polarity by having negative and positive ends. Due to this charge difference, a water molecule is called a dipole.

Explanation:

Answer:

824 g

Explanation:

First we convert 7.0 x 10²⁴ formula units of magnesium chloride (MgCl₂) into moles, using Avogadro's number:

There are two Cl moles per MgCl₂ moles, meaning that we have (2 * 11.62) 23.24 moles of Cl

Finally we convert 23.24 moles of chlorine into grams, using chlorine's molar mass:

Answer:

A. Autotrophs

Explanation:

an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.

humans and other mammals, plants, and a select few other things

The Lewis base that we can see in the equation is [tex]H_{2} O[/tex]

We have to bear in mind that the Lewis base is the substance that is able to donate a pair of electrons. The substances that is able to accept the pair of electrons is what we call the Lewis acid.

The Lewis acid must possess a space for the addition of an electron pair while the Lewis base would have to be a specie that has a lone pair of electrons or has a negative charge. Thus the water molecule would serve as a Lewis base in this regard.

Learn more about Lewis base;https://brainly.com/question/15570523

#SPJ1

Answer:

6 upper H subscript 2 upper O plus UPper C r (upper H subscript 2 upper O) subscript 6 superscript 3 plus.

✔ H2O or A.)

Cr3+

Cr(H2O)63+

Answer:

0. 070g

Mass of 1 Si atom =28.08/6.022*1023

So mass 1.5 *1021*4.6629*10-23

Answer:

[tex]\boxed {\boxed {\sf 0.070 \ g \ Si}}[/tex]

Explanation:

We are given a value of atoms and asked to find the mass. We can complete this in 2 steps.

1. Convert Atoms to Moles

First, we have to convert atoms to moles. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.

In this case, the particles are silicon atoms. We can set up a proportion.

[tex]\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]

Multiply by the value of atoms given.

[tex]1.5 \times 10^{21} \ atom \ Si *\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]

Flip the ratio. This allows the atoms of silicon units to cancel and leave the moles of silicon.

[tex]1.5 \times 10^{21} \ atom \ Si *\frac {1 \ mol \ Si } {6.022 \times 10^{23} \ atom \ Si}[/tex]

[tex]1.5 \times 10^{21}*\frac {1 \ mol \ Si } {6.022 \times 10^{23} }[/tex]

[tex]\frac {1.5 \times 10^{21} \ mol \ Si } {6.022 \times 10^{23} }[/tex]

[tex]0.002490866822 \ mol \ Si[/tex]

2. Convert Moles to Grams

Next, we convert the moles to grams. We use the molar mass, which is found on the Periodic Table. This value is the number of grams in 1 mole of a substance. Look for silicon (Si).

Use this value as a ratio.

[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

Multiply by the number of moles we calculated.

[tex]0.002490866822 \ mol \ Si *\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

The moles of silicon units cancel, so we are left with grams.

[tex]0.002490866822 *\frac {28.085 \ g \ Si}{1}[/tex]

[tex]0.002490866822 *{28.085 \ g \ Si}[/tex]

[tex]0.06995599469 \ g \ Si[/tex]

3. Round

Finally we must round our answer. The original value has 2 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.

[tex]0.069\underline95599469 \ g Si[/tex]

The 9 tells us to round the other 9 to a 0, then the 6 to a 7.

[tex]0.070 \ g \ Si[/tex]

The mass of 1.5 × 10²¹ silicon atoms is 0.070 grams of silicon.

Answer:

true

Explanation:

np have a good day brainliest?

Answer:

1.15 M

Explanation:

Step 1: Given data

Step 2: Calculate the final concentration of the solution

We want to prepare a dilute solution from a concentrated one by adding water. We can calculate the concentration of the dilute solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁/V₂

C₂ = 3.00 M × 0.125 L/0.325 L = 1.15 M

Answer:

4.74

Explanation:

pH= -log[H+]

pH= -log(1.8 x 10^-5)= 4.74

3:6:2 is the correct answer

Answer:

46.41%

Explanation:

Find the total r.m.m of AL(CLO3)3 put it equals to 100%.....The take 106.5,the total r.m.m of Cl and find the missing which is the percentage by cross multiplication

Answer:

[tex]n_{Cl_2}=0.3molCl_2[/tex]

Explanation:

Hello there!

In this case, according to the given chemical reaction whereas the sodium chloride is in a 2:1 mole ratio with chlorine, the required moles of the later are computed as shown below:

[tex]n_{Cl_2}=0.6molNaCl*\frac{1molCl_2}{2molNaCl}[/tex]

So we cancel out the moles of NaCl to obtain:

[tex]n_{Cl_2}=0.3molCl_2[/tex]

Best regards!

Answer:

answer po Yan hope it help

Answer:there different from the rocky like planets gas giants don't have such a firm surface like rocky terrestrial planets

Explanation:

Answer:

phototropism

Explanation:

since photo is (light?

Answer:

Baking a cake

Explanation:

Ape-x aprroved

Answer:  molecular weight of CUSO4 or grams. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles CUSO4, or 346.10221 grams. Note that rounding errors may occur, so always check the results.

Explanation:

Answer:

0.22M

Explanation:

We will be using the law of dilutions. We are simply increasing the amount of solvent to create a larger volume of solution.

So: moles before dilution = moles after dilution & [tex]moles_{concentrated} = moles_{dilute}[/tex]. And M = moles/liter of solution, so if we express this as moles = M x [tex]L_{soln}[/tex].

That is how we derive the formula we will be using: [tex]M_{concentrated} * Vol_{conc} = M_{dilute} * Vol_{dilute}[/tex]

or

[tex]M_{1} * Vol_{1} = M_{2} * Vol_{2}[/tex]

Applying this formula to our problem, we can substitute the variables with the given values to find the molarity of the dilute solution.

M1 = 3.5M

V1 = 18.8mL

M2 = ?

V2 = 296.6mL

Equation: (3.5M)(18.8mL) = (296.6mL)(M2)

==> 65.8M*mL = 296.6mL * M2

==> M2 = (65.8 M*mL)/296.6mL

==> M2 = 0.22M

Answer: a. Cathode

b. Galvanic cell

c. Anode

d. Electrolytic cell

e. half reaction

Explanation:

Galvanic cell or Electrochemical cell is defined as a device which is used for the conversion of the chemical energy produced in a spontaneous redox reaction into the electrical energy.

Electrolytic cell is a device where electrical energy is used to drive a non spontaneous chemical reaction.

In the electrochemical cell, the oxidation occurs at an anode which is a negative electrode and the reduction occurs at the cathode which is a positive electrode.  Thus the electrons are produced at anode and travel towards cathode.

The balanced two-half reactions will be:

Oxidation half reaction : [tex]M\rightarrow M^{n+}+ne^-[/tex]

Reduction half reaction : [tex]N^{n+}+ne^-\rightarrow N[/tex]

Thus the overall reaction will be: [tex]M+N^{n+}\rghtarrow M^{n+}+N[/tex]

Answer:

A) w/w % of Fe - 2.44%

B) w/w % of Mg - 4.590%

C) w/w % of Ca - 96%

Explanation:

A) w/w % of Fe in limestone as Fe2O3 = (Mass of Fe2O3 /Mass of limestone) x 100

 0.0357/1.4639 X 100

= 2.438 =2.44

B) w/w % of Mg in limestone as Mg2P2O7 = (Mass of Mg2P2O7 /Mass of limestone) x 100

= 0.0672/1.4639 X 100

= 4.590

C) w/w % of Ca in limestone as CaSO4 = (Mass of CaSO4/Mass of limestone) x 100

= 1.4058/1.4639 X 100

= 96

Answer:Fe =1.71%    Ma=0.99%    Ca=28.24%

Explanation:

Answer:

Nuclear reactions involve a change in an atom's nucleus, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclear.

Answer:

B. Particles of matter have spaces between them.

Explanation:

The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :

1. Matter is made of small particles of atoms or molecules.

2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.

3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.

4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.

The correct option is B.

Answer:

Hello There!!

Explanation:

I think the answer is possibly C. It identified the charge on a single electron.

hope this helps,have a great day!!

~Pinky~

[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]

C. It identified the charge on a single electron.

Answer:

D and E

Explanation:

The other answers don't support steel, they support iron or are supporting both, and the question is why steel alloys are more often used

C supports both

B supports how iron's strength

A supports iron being easily shaped and bent

hope this helps

Answer:

in my opinion I think the answer the be "A"