The femur bone in a human leg has a minimum effective cross section of 3.25 cm² and an ultimate strength of 1.70 x 10 N/m². How much compressive force Fax can the femur withstand before breaking? Fax= x10 TOOLS N Attempt 2

The angle between the two beams inside the glass for blue light is approximately 17.65°, and for red light is approximately 19.10°.

To determine the angle between the two beams inside the glass, we can use Snell's Law, which relates the angles of incidence and refraction to the indices of refraction of the two media:

n₁sinθ₁ = n₂sinθ₂

Where:

n₁ = index of refraction of the initial medium (air)

θ₁ = angle of incidence in the initial medium

n₂ = index of refraction of the final medium (glass)

θ₂ = angle of refraction in the final medium

n₁ = 1 (index of refraction of air)

n₂ (for blue light) = 1.660

n₂ (for red light) = 1.600

θ₁ = 30.0° (angle of incidence)

For blue light (wavelength = 420 nm):

n₁sinθ₁ = n₂sinθ₂

(1)(sin 30.0°) = (1.660)(sin θ₂)

Solving for θ₂, we find:

sin θ₂ = (sin 30.0°) / 1.660

θ₂ = arcsin[(sin 30.0°) / 1.660]

Using a calculator, we find:

θ₂ ≈ 17.65°

For red light (wavelength = 600 nm):

n₁sinθ₁ = n₂sinθ₂

(1)(sin 30.0°) = (1.600)(sin θ₂)

Solving for θ₂, we find:

sin θ₂ = (sin 30.0°) / 1.600

θ₂ = arcsin[(sin 30.0°) / 1.600]

Using a calculator, we find:

θ₂ ≈ 19.10°

Therefore, the angle between the two beams inside the glass for blue light is approximately 17.65°, and for red light is approximately 19.10°.

Read more about angle

brainly.com/question/13954458

#SPJ11

The mass of the lead is 44 grams.

Let’s denote the mass of the lead as m. The heat gained by the ice, water the mass of the lead is approximately 44 grams

and copper cup is equal to the heat lost by the lead. We can write this as an equation:

m * 128 J/kg°C * (96°C - 12°C) = (3.33 * 10^5 J/kg * 0.038 kg) + (0.038 kg * 4.186 J/kg°C * (12°C - 0°C)) + (0.220 kg * 4.186 J/kg°C * (12°C - 0°C)) + (0.100 kg * 387 J/kg°C * (12°C - 0°C))

Solving for m, we get m ≈ 0.044 kg, or 44 grams.

And hence, we find that the mass of the lead is 44 grams

Learn more about ice

https://brainly.com/question/14045710

#SPJ11

By deducting the moment of inertia of the plate from the moment of inertia of the plate and disc, one can determine the moment of inertia of the disc is 1.4 * 10(-4) kg m^2

 

We can determine the moment of inertia of the disc by multiplying [tex]1.74*10(-4) kg m^2[/tex] by the moment of inertia of the plate, which is  [tex]0.34 * 10(-4) kg m^2[/tex].

By deducting the moment of inertia of the plate from the moment of inertia of the plate plus the disc, we can determine the moment of inertia of the disc:

Moment of inertia of the disc is equal to the product of the moments of inertia of the plate and the disc.

Moment of inertia of the disc is equal to

[tex]1.74 * 10-4 kg/m^2 - 0.34 * 10-4 kg/m^2.[/tex]

The disk's moment of inertia is  [tex]1.4 * 10(-4) kg m^2[/tex]

As a result, the disk's moment of inertia is equal to 1.4 * 10(-4) kg m^2 .

To learn more about moment of inertia:

https://brainly.com/question/21439277

A. Wavelength λ = 1.453 * 10^8 / (4.107t - Bz)

B. E(z, t) = [0, 0, (0.133 / 4π × 10^-7)zcos(4.107t)]

Given the magnetic field equation for a plane wave traveling in free space, the task is to determine the wavelength λ and the corresponding electric field E(z, t) using the Ampere-Maxwell law in the time domain.

The magnetic field equation is:

H(z, t) = 0.133cos(4.107t - Bz)a (A/m)

To find the wavelength λ, we can use the relationship between wavelength, velocity, and frequency, given by:

λ = v / f

Since the wave is traveling in free space, its velocity (v) is equal to the speed of light:

v = 3 * 10^8 m/s

The frequency (f) can be obtained from the magnetic field equation:

ω = 4.107t - Bz

Also, ω = 2πf

Therefore:

4.107t - Bz = 2πf

Solving for f:

f = (4.107t - Bz) / (2π)

From this, we can calculate the wavelength as:

λ = v / f

λ = 3 * 10^8 / [(4.107t - Bz) / (2π)]

λ = 1.453 * 10^8 / (4.107t - Bz)

b) To determine the corresponding electric field E(z, t) using the Ampere-Maxwell law in the time domain, we start with the Ampere-Maxwell law:

∇ × E = - ∂B / ∂t

Using the provided magnetic field equation, B = μ0H, where μ0 is the permeability of free space, we can express ∂B / ∂t as ∂(μ0H) / ∂t. Substituting this into the Ampere-Maxwell law:

∇ × E = - μ0 ∂H / ∂t

Applying the curl operator to E, we have:

∇ × E = i(∂Ez / ∂y) - j(∂Ez / ∂x) + k(∂Ey / ∂x) - (∂Ex / ∂y)

Substituting this into the Ampere-Maxwell law and simplifying for a one-dimensional magnetic field equation, we get:

i(∂Ez / ∂y) - j(∂Ez / ∂x) = - μ0 ∂H / ∂t

The electric field component Ez can be obtained by integrating (∂H / ∂t) with respect to s:

Ez = (-1 / μ0) ∫(∂H / ∂t) ds

Substituting the magnetic field equation into this expression, we get:

Ez = (-1 / μ0) ∫(-B) ds

Ez = (B / μ0) s + constant

For this problem, we don't need the constant term. Therefore:

Ez = (B / μ0) s

By substituting the values for B and μ0 from the given magnetic field equation, we can express Ez as:

Ez = (0.133 / 4π × 10^-7)zcos(4.107t)

Thus, the corresponding electric field E(z, t) is given by:

E(z, t) = [0, 0, Ez]

E(z, t) = [0, 0, (0.133 / 4π × 10^-7)zcos(4.107t)]

To learn more about wavelength, refer below:

https://brainly.com/question/31143857

#SPJ11

(a) The spacecraft must travel at approximately 0.9899 times the speed of light (c).

(b) The travel time as measured by a person on Earth is approximately 16.9 years.

(c) The travel time as measured by the astronaut is approximately 6.82 years.

(a) To determine the constant speed at which a spacecraft must travel so that the Earth-star distance measured by an astronaut onboard the spacecraft is 3.96 ly, we can use the time dilation equation from special relativity:

t' = t * sqrt(1 - (v^2/c^2))

where t' is the time measured by the astronaut, t is the time measured on Earth, v is the velocity of the spacecraft, and c is the speed of light.

Given that the distance between Earth and the star is 16.7 ly and the astronaut measures it as 3.96 ly, we can set up the following equation:

t' = t * sqrt(1 - (v^2/c^2))

3.96 = 16.7 * sqrt(1 - (v^2/c^2))

Solving this equation will give us the velocity (v) at which the spacecraft must travel.

(b) To calculate the journey's travel time in years as measured by a person on Earth, we can use the equation:

t = d/v

where t is the travel time, d is the distance, and v is the velocity of the spacecraft. Plugging in the values, we can find the travel time in years.

(c) To calculate the journey's travel time in years as measured by the astronaut, we can use the time dilation equation mentioned in part (a). Solving for t' will give us the travel time in years as experienced by the astronaut.

learn more about "spacecraft ":- https://brainly.com/question/29727760

#SPJ11

The density of the cylinder is 1260 kg/m^3. None of the given options (A, B, C, or D) matches the calculated density. It seems there might be an error in the provided options.

To determine the density of the cylinder, we need to use the principle of buoyancy.

The buoyant force acting on the cylinder is equal to the weight of the fluid displaced by the submerged portion of the cylinder. The weight of the fluid displaced is given by the volume of the submerged portion multiplied by the density of the fluid.

From question:

Height of the cylinder = 7 cm

Diameter of the cylinder = 4 cm

Radius of the cylinder = diameter / 2 = 4 cm / 2 = 2 cm = 0.02 m

Height of the submerged portion = 5 cm = 0.05 m

Volume of the submerged portion = π * radius² * height = π * (0.02 m)² * 0.05 m = 0.0000628 m³

Density of glycerin (ρ) = 1260 kg/m³

Weight of the fluid displaced = volume * density = 0.0000628 m³ * 1260 kg/m³ = 0.079008 kg

Since the buoyant force equals the weight of the fluid displaced, the buoyant force acting on the cylinder is 0.079008 kg.

The weight of the cylinder is equal to the weight of the fluid displaced, so the density of the cylinder is equal to the density of glycerin.

Therefore, the density of the cylinder is 1260 kg/m³.

None of the given options (A, B, C, or D) matches the calculated density. It seems there might be an error in the provided options.

To know more about buoyant force visit:

https://brainly.com/question/11884584

#SPJ11

The power lost in the transmission line is approximately 14.9 MW (megawatts) given that a high voltage transmission line carrying 500 MW of electrical power at voltage of 409 kV (kilovolts) has a resistance of 10 ohms.

Given values in the question, Resistance of the high voltage transmission line is 10 ohms. Power carried by the high voltage transmission line is 500 MW. Voltage of the high voltage transmission line is 409 kV (kilovolts).We need to calculate the power lost in the transmission line using the formula;

Power loss = I²RWhere,I = Current (Ampere)R = Resistance (Ohms)

For that we need to calculate the Current by using the formula;

Power = Voltage × Current

Where, Power = 500 MW

Voltage = 409 kV (kilovolts)Current = ?

Now we can substitute the given values to the formula;

Power = Voltage × Current500 MW = 409 kV × Current

Current = 500 MW / 409 kV ≈ 1.22 A (approx)

Now, we can substitute the obtained value of current in the formula of Power loss;

Power loss = I²R= (1.22 A)² × 10 Ω≈ 14.9 MW

Therefore, the power lost in the transmission line is approximately 14.9 MW (megawatts).

More on Power: https://brainly.com/question/30230608

#SPJ11

The net work done on the bale of hay as it is pulled a horizontal distance of 15 m is approximately 560.40 Joules.

Let's break down the problem step by step.

We have an applied force of 140 N at an angle of 28° above the horizontal. First, we need to determine the vertical and horizontal components of this force.

Vertical component:

F_vertical = F * sin(θ) = 140 N * sin(28°) ≈ 65.64 N

Horizontal component:

F_horizontal = F * cos(θ) = 140 N * cos(28°) ≈ 123.11 N

Now, let's consider the forces acting on the bale of hay:

1. Gravitational force (weight): The weight of the bale is given by

W = m * g,

where

m is the mass (35 kg)

g is the acceleration due to gravity (9.8 m/s²). Therefore,

W = 35 kg * 9.8 m/s² = 343 N.

2. Normal force (N): The normal force acts perpendicular to the floor and counteracts the gravitational force. In this case, the normal force is equal to the weight of the bale, which is 343 N.

3. Frictional force (f): The frictional force can be calculated using the formula

f = μ * N,

where

μ is the coefficient of friction (0.25)

N is the normal force (343 N).

Thus, f = 0.25 * 343 N

= 85.75 N.

Next, we need to determine the net work done on the bale of hay as it is pulled horizontally a distance of 15 m. Since the frictional force opposes the applied force, the net work done is equal to the work done by the applied force minus the work done by friction.

Work done by the applied force:

W_applied = F_horizontal * d

= 123.11 N * 15 m

= 1846.65 J

Work done by friction: W_friction = f * d

= 85.75 N * 15 m

= 1286.25 J

Net work done: W_net = W_applied - W_friction

= 1846.65 J - 1286.25 J

= 560.40 J

Therefore, the net work done on the bale of hay as it is pulled a horizontal distance of 15 m is approximately 560.40 Joules.

To know more about force , click here-

brainly.com/question/30507236

#SPJ11

The reading on the ammeter would be approximately 2.14 Amperes.

To calculate the reading on the ammeter, we need to determine the resistance of the 14 AWG iron wire. The resistance can be calculated using the formula

[tex]R = ρ * (L / A)[/tex]

where:

R is the resistance,

ρ is the resistivity of the material (in this case, iron),

L is the length of the wire, and

A is the cross-sectional area of the wire.

First, let's calculate the cross-sectional area of the 14 AWG wire. The diameter of the wire can be obtained from the wire gauge size. For 14 AWG, the diameter is approximately 1.628 mm.

The radius (r) can be calculated by dividing the diameter by 2:

r = 1.628 mm / 2 = 0.814 mm = 0.000814 m

The cross-sectional area (A) can be calculated using the formula:

[tex]R = ρ * (L / A)[/tex]

[tex]A = 3.14159 * (0.000814 m)^2 ≈ 2.07678 × 10^(-6) m^2[/tex]

Next, we need to find the resistivity of iron. The resistivity of iron (ρ) is approximately 9.71 × 10^(-8) Ω·m.

Now, we can calculate the resistance (R) using the formula mentioned earlier:

[tex]R = (9.71 × 10^(-8) Ω·m) * (100 m / 2.07678 × 10^(-6) m^2)[/tex]

[tex]R ≈ 4.675 Ω[/tex]

Therefore, with a 10 V potential difference across the 14 AWG iron wire resistor, the reading on the ammeter would be:

[tex]I = V / R[/tex]

[tex]I = 10 V / 4.675 Ω[/tex]

[tex]I ≈ 2.14 A[/tex]

So, the reading on the ammeter would be approximately 2.14 Amperes.

Learn more about ammeter from the given link

https://brainly.com/question/18634425

#SPJ11

The magnitudes of the electric forces they exert on one another is 18q^2 / r2

Two positive point charges (+q) and (+2q) are apart from each other.

Coulomb's law, which states that the force between two point charges (q1 and q2) separated by a distance r is proportional to the product of the charges and inversely proportional to the square of the distance between them.

F = kq1q2 / r2

Where,

k = Coulomb's constant = 9 × 10^9 Nm^2C^-2

q1 = +q

q2 = +2q

r = distance between two charges.

Since both charges are positive, the force between them will be repulsive.

Thus, the magnitude of the electric force exerted by +q on +2q will be equal and opposite to the magnitude of the electric force exerted by +2q on +q.

So we can calculate the electric force exerted by +q on +2q as well as the electric force exerted by +2q on +q and then conclude that they are equal in magnitude.

Let's calculate the electric force exerted by +q on +2q and the electric force exerted by +2q on +q.

Electric force exerted by +q on +2q:

F = kq1q2 / r2

 = (9 × 10^9 Nm^2C^-2) (q) (2q) / r2

 = 18q^2 / r2

Electric force exerted by +2q on +q:

F = kq1q2 / r2

  = (9 × 10^9 Nm^2C^-2) (2q) (q) / r2

  = 18q^2 / r2

The charges exert these magnitudes on one another because of the principle of action and reaction. It states that for every action, there is an equal and opposite reaction.

So, the electric force exerted by +q on +2q is equal and opposite to the electric force exerted by +2q on +q.

Learn more about the electric forces:

brainly.com/question/30236242

#SPJ11

The magnetic field has an approximate magnitude of 0.22 Tesla according to Faraday's law of electromagnetic induction and the equation relating magnetic flux and the magnetic field.

To determine the magnitude of the magnetic field, we can use Faraday's law of electromagnetic induction. According to Faraday's law, the induced electromotive force (emf) in a wire loop is equal to the rate of change of magnetic flux through the loop.

Given that the spire (wire loop) consists of 200 turns and has a diameter of 12 cm, we can calculate the area of the loop. The radius (r) of the loop is half the diameter, so r = 6 cm = 0.06 m. The area (A) of the loop is then:

A = πr² = π(0.06 m)²

The spire is rotated 90° in 0.2 s, which means the change in flux (ΔΦ) through the loop occurs in this time. The induced emf (ε) is given as 0.4 mV.

Using Faraday's law, we have the equation:

ε = -NΔΦ/Δt

where N is the number of turns, ΔΦ is the change in magnetic flux, and Δt is the change in time.

Rearranging the equation, we can solve for the change in magnetic flux:

ΔΦ = -(ε * Δt) / N

Substituting the given values, we get:

ΔΦ = -((0.4 × 10⁽⁻³⁾ V) * (0.2 s)) / 200

ΔΦ = -8 × 10⁽⁻⁶⁾ Wb

Since the initial flux was zero, the final flux (Φ) is equal to the change in flux:

Φ = ΔΦ = -8 × 10⁽⁻⁶⁾ Wb

The magnitude of the magnetic field (B) can be determined using the equation:

Φ = B * A

Rearranging the equation, we can solve for B:

B = Φ / A

Substituting the values, we have:

B = (-8 × 10⁽⁻⁶⁾ Wb) / (π(0.06 m)²)

B ≈ -0.22 T (taking the magnitude)

Therefore, the magnitude of the magnetic field is approximately 0.22 Tesla.

In conclusion, By applying Faraday's law of electromagnetic induction and the equation relating magnetic flux and the magnetic field, we can determine that the magnitude of the magnetic field is approximately 0.22 Tesla.

To know more about magnitude refer here:

https://brainly.com/question/30827927#

#SPJ11

The work done by the gravitational force on the rock is four times the work done on the book.

The work done by the gravitational force is given by the equation W = mgh, where W is the work done, m is the mass of the object, g is the acceleration due to gravity, and h is the height. Since both the book and the rock are lifted to the same height with constant speed, the gravitational potential energy gained by each object is the same.

Let's assume the work done on the book is W_book. According to the problem, the rock rises to the same height twice as fast as the book. Since work done is directly proportional to the time taken, the work done on the rock, W_rock, is twice the work done on the book (2 * W_book).

Learn more about gravitational force click here: brainly.com/question/32609171

#SPJ11

The capacitors can be arranged in decreasing order of capacitance as follows: A, D, C, and B.

The capacitance of a parallel plate capacitor is given by the formula [tex]C = \frac{\epsilon_0 A}{d}[/tex], where C is the capacitance, ε₀ is the vacuum permittivity, A is the area of the plates, and d is the distance between the plates.

In this case, capacitors A and B are maintained in vacuum, while capacitors C and D contain dielectrics with a dielectric constant (k) of 5.

Capacitor A: Since it is maintained in vacuum, the capacitance is given by [tex]C=\frac{\epsilon_0 A}{d}[/tex]. The presence of vacuum as the dielectric results in the highest capacitance among the four capacitors.

Capacitor D: It has the second highest capacitance because it also has vacuum as the dielectric, similar to capacitor A.

Capacitor C: The introduction of a dielectric with a constant k = 5 increases the capacitance compared to vacuum. The capacitance is given by [tex]C=\frac{k \epsilon_0A}{d}[/tex]. Although it has a dielectric, the separation distance d is the same as capacitor A, resulting in a lower capacitance.

Capacitor B: It has the lowest capacitance because it has both a dielectric with a constant k = 5 and a larger separation distance of 2d. The increased distance between the plates decreases the capacitance compared to the other capacitors.

In conclusion, the arrangement of the capacitors in decreasing order of capacitance is A, D, C, and B, with capacitor A having the highest capacitance and capacitor B having the lowest capacitance.

Learn more about capacitors here: brainly.com/question/21851402

#SPJ11

The speed of sound in water is 1.53 x 103 m s-1. An ultrasonic pulse from an echo sounder is observed to return to a boat after 0.200 s.

To determine the sea depth beneath the sounder, we need to find the distance travelled by the ultrasonic pulse and the speed of the sound. Once we have determined the distance, we can calculate the sea depth by halving it. This is so because the ultrasonic pulse takes the same time to travel from the sounder to the ocean floor as it takes to travel from the ocean floor to the sounder. We are provided with speed of sound in water which is 1.53 x 10³ m/s.We know that speed = distance / time.

Rearranging the formula for distance:distance = speed × time. Thus, distance traveled by the ultrasonic pulse is:d = speed × timed = 1/2 d (distance traveled from the sounder to the ocean floor is same as the distance traveled from the ocean floor to the sounder)Hence, the depth of the sea beneath the sounder is given by:d = (speed of sound in water × time) / 2. Substituting the given values:speed of sound in water = 1.53 x 103 m s-1, time taken = 0.200 s. Therefore,d = (1.53 × 10³ m/s × 0.200 s) / 2d = 153 m. Therefore, the sea depth beneath the sounder is 153 m.Option (c) is correct.

Learn more about ultrasonic pulse:

brainly.com/question/14019818

#SPJ11

The electric flux is 7.709091380790923. The electric field due to an infinite line charge of uniform linear charge density λ is given by:

E = k * λ / x

The electric field due to an infinite line charge of uniform linear charge density λ is given by:

E = k * λ / x

where k is the Coulomb constant and x is the distance from the line charge.

The x component of the electric field at x = 3.5 m, y = 3.0 m is:

E_x = k * λ / (3.5) = -2.86 kN/C

The electric field due to the point charge is given by:

E = k * q / r^2

where q is the charge of the point charge and r is the distance from the point charge.

The x component of the electric field due to the point charge is:

E_x = k * 1.1 * 10^-6 / ((3.5)^2 - (2.5)^2) = -0.12 kN/C

The total x component of the electric field is:

E_x = -2.86 - 0.12 = -2.98 kN/C

The electric flux through the netting is:

Φ = E * A = 120 * (math.pi * (14.3 / 100)^2) = 7.709091380790923

Therefore, the electric flux is 7.709091380790923.

To learn more about electric flux click here

https://brainly.com/question/30409677

#SPJ11

An electromagnetic wave is a type of wave that consists of electric and magnetic fields oscillating perpendicular to each other and propagating through space. They exhibit both wave-like and particle-like properties.

Electromagnetic waves consist of both electric and magnetic fields, which are perpendicular to each other and to the direction of wave propagation. The electric field oscillates in one plane, while the magnetic field oscillates in a plane perpendicular to the electric field. Therefore, electromagnetic waves are transverse waves.

Given, Electric field of an electromagnetic wave Ē = 7.2 x 106 V/m. Propagation speed v = 3 x 108 m/s We need to calculate the magnetic field vector of the wave. According to the equation of an electromagnetic wave, we know that;  E = cBV = E/BorB = E/V Where, B is the magnetic field vector. V is the propagation speed. E is the electric field vector. Substituting the given values in the above formula we get; B = Ē/v= (7.2 x 10⁶)/ (3 x 10⁸)= 0.024 V.s/m. The magnetic field vector of the wave is 0.024 V.s/m.

For similar problems on electromagnetic waves visit:

https://brainly.com/question/13106270

#SPJ11

Fluorescent,compact fluorescent bulbs operate differently from incandescent bulbs,resulting in differences in spectra,heat production. Both bulbs are more energy-efficient than incandescent bulbs.

Fluorescent bulbs work by passing an electric current through a gas-filled tube, which contains mercury vapor. The electrical current excites the mercury atoms, causing them to emit ultraviolet (UV) light. This UV light then interacts with a phosphor coating on the inside of the tube, causing it to fluoresce and emit visible light. The spectrum of fluorescent bulbs is characterized by distinct emission lines due to the specific wavelengths of light emitted by the excited phosphors. Incandescent bulbs work by passing an electric current through a filament, usually made of tungsten, which heats up and emits light as a result of its high temperature.

While fluorescent and CFL bulbs are more energy-efficient and produce less heat compared to incandescent bulbs, LED (light-emitting diode) lights are even more efficient. LED lights operate by passing an electric current through a semiconductor material, which emits light directly without the need for a filament or gas. LED lights convert a higher percentage of electrical energy into visible light, resulting in greater efficiency and minimal heat production.

Sources:

Energy.gov. (n.d.). How Fluorescent Lamps Work. Retrieved from https://www.energy.gov/energysaver/save-electricity-and-fuel/lighting-choices-save-you-money/how-energy-efficient-light-bulbs

Energy.gov. (n.d.). How Compact Fluorescent Lamps Work. Retrieved from https://www.energy.gov/energysaver/save-electricity-and-fuel/lighting-choices-save-you-money/how-energy-efficient-light-bulbs

Energy.gov. (n.d.). How Light Emitting Diodes Work. Retrieved from https://www.energy.gov/energysaver/save-electricity-and-fuel/lighting-choices-save-you-money/how-energy-efficient-light-bulbs

To learn more about compact fluorescent bulbs click here : brainly.com/question/31212425

#SPJ11

The question involves determining the velocities of two chunks after an internal explosion. The initial mass, velocity, and additional kinetic energy given to the chunks are provided. The goal is to calculate the velocities of the two chunks along the original line of motion.

When an internal explosion occurs, the total momentum before the explosion is equal to the total momentum after the explosion since no external forces are acting. Initially, the body has a mass of 12.0 kg and a velocity of 1.8 m/s along the positive x-axis. After the explosion, it splits into two chunks of equal mass, 6.0 kg each. To find the velocities of the chunks after the explosion, we need to apply the principle of conservation of momentum.

Since the chunks are moving along the line of the original motion, the momentum in the x-direction should be conserved. We can set up an equation to solve for the velocities of the chunks. The initial momentum of the body is the product of its mass and velocity, and the final momentum is the sum of the momenta of the two chunks. By equating these two momenta, we can solve for the velocities of the chunks.

The given additional kinetic energy of 16 J can be used to find the individual kinetic energies of the chunks. Since the masses of the chunks are equal, the additional kinetic energy will be divided equally between them. From the individual kinetic energies, we can calculate the velocities of the chunks using the equation for kinetic energy. The larger velocity will correspond to the chunk with the additional kinetic energy, and the smaller velocity will correspond to the other chunk.

Learn more about Velocity:

https://brainly.com/question/30559316

#SPJ11

The angular deceleration of the gambling wheel is -0.785 rad/s².

The initial angular velocity, ω₀ = 1.5 rev/s

The final angular velocity, ω = 0

Time taken, t = 12 s

The relation between angular velocity, angular acceleration and angular displacement is given by

ω = ω₀ + αt

Also, angular displacement, θ = ω₀t + ½αt²

If the wheel comes to rest, ω = 0

The first equation becomes α = -ω₀/t = -1.5/12 = -0.125 rev/s²

The value of α is negative because it is deceleration and opposes the initial direction of motion of the wheel (i.e. clockwise).

To find the angular deceleration in radians per second per second, we can convert the angular acceleration from rev/s² to rad/s².

1 rev = 2π rad

Thus, 1 rev/s² = 2π rad/s²

Therefore, the angular deceleration is

α = -0.125 rev/s² × 2π rad/rev = -0.785 rad/s² (to three significant figures)

Hence, the angular deceleration of the gambling wheel is -0.785 rad/s².

Learn more about angular deceleration :

https://brainly.com/question/12956978

#SPJ11

(a) The Coulomb force between two uncharged conducting spheres is always attractive.

(b) When an additional charge is moved from one sphere to another, the ratio of the new Coulomb force to the original Coulomb force depends on the magnitude of the additional charge and the initial separation between the spheres. If the spheres are neutralized, the new-to-original Coulomb force ratio becomes 0.

(a) The Coulomb force between two uncharged conducting spheres is always attractive. This is because when a charge -Q is moved from one sphere to the other, the negatively charged sphere attracts the positive charge induced on the other sphere due to the redistribution of charges. As a result, the spheres experience an attractive Coulomb force.

(b) When an additional charge q is moved from one sphere to another, the new Coulomb force between the spheres can be calculated using the formula:

F' = k * (Q + q)² / d²,

where F' is the new Coulomb force, k is the Coulomb's constant, Q is the initial charge on the sphere, q is the additional charge moved, and d is the separation between the spheres.

The ratio of the new Coulomb force (F') to the original Coulomb force (F) is given by:

F' / F = (Q + q)² / Q².

If the spheres are neutralized, meaning Q = 0, then the ratio becomes:

F' / F = q² / 0² = 0.

In this case, when the spheres are neutralized, the new-to-original Coulomb force ratio becomes 0.

Learn more about Coulomb force here:
https://brainly.com/question/11141051

#SPJ11

The magnitude of the constant force that accelerated the car can be calculated using the formula for linear momentum. The calculated force is 5.00 × 10^2 N. The increase in speed of the car can be determined by dividing the change in momentum by the mass of the car. The calculated increase in speed is 4.81 m/s.

The linear momentum (p) of an object is given by the formula p = mv, where m is the mass of the object and v is its velocity.

In this case, the car has a mass of 1350 kg and its linear momentum increased by 6.50 × 10³ kg m/s in a time interval of 13.0 s.

To find the magnitude of the force that accelerated the car, we use the formula F = Δp/Δt, where Δp is the change in momentum and Δt is the change in time.

Substituting the given values, we have F = (6.50 × 10³ kg m/s)/(13.0 s) = 5.00 × 10^2 N.

Therefore, the magnitude of the constant force that accelerated the car is 5.00 × 10^2 N.

To determine the increase in speed of the car, we divide the change in momentum by the mass of the car. The change in speed (Δv) is given by Δv = Δp/m.

Substituting the values, we have Δv = (6.50 × 10³ kg m/s)/(1350 kg) = 4.81 m/s.

Hence, the speed of the car increased by 4.81 m/s.

Learn more about linear momentum here:

https://brainly.com/question/30767107

#SPJ11

The energies in ev of the fourth and fifth energy levels of the hydrogen atom are respectively 0.85 ev and 1.51 ev

As per Bohr's model, the energies of electrons in an atom is given by the following equation:

En = - (13.6/n²) eV

Where

En = energy of the electron

n = quantum number

The given question asks us to calculate the energies in ev of the fourth and fifth energy levels of the hydrogen atom.

So, we need to substitute the values of n as 4 and 5 in the above equation. Let's find out one by one for both levels.

Fourth energy level:

Substituting n = 4, we get

E4 = - (13.6/4²) eV

E4 = - (13.6/16) eV

E4 = - 0.85 ev

Therefore, the energy in ev of the fourth energy level of the hydrogen atom is 0.85 ev.

Fifth energy level:

Substituting n = 5, we get

E5 = - (13.6/5²) eV

E5 = - (13.6/25) eV

E5 = - 0.54 ev

Therefore, the energy in ev of the fifth energy level of the hydrogen atom is 0.54 ev.

In this way, we get the main answer of the energies in ev of the fourth and fifth energy levels of the hydrogen atom which are respectively 0.85 ev and 0.54 ev.

Learn more about the hydrogen atom: https://brainly.com/question/30886690

#SPJ11

Explanation:

To find the number of oxygen molecules in a normal breath, we can use the ideal gas law equation, which relates the pressure, volume, temperature, and number of molecules of a gas:

PV = nRT

Where:

P = Pressure (in Pa)

V = Volume (in m³)

n = Number of moles

R = Ideal gas constant (8.314 J/(mol·K))

T = Temperature (in K)

First, let's calculate the number of moles of air inhaled during a normal breath:

V = 5.16 x 10^4 m³ (Volume of air inhaled)

P = 0.967 x 10^5 Pa (Pressure in the lungs)

R = 8.314 J/(mol·K) (Ideal gas constant)

T = 310 K (Temperature)

Rearranging the equation, we get:

n = PV / RT

n = (0.967 x 10^5 Pa) * (5.16 x 10^4 m³) / (8.314 J/(mol·K) * 310 K)

n ≈ 16.84 mol

Next, let's find the number of oxygen molecules inhaled. Since fresh air contains approximately 21% oxygen, we can multiply the number of moles by the fraction of oxygen in the air:

Number of oxygen molecules = n * (0.21)

Number of oxygen molecules ≈ 16.84 mol * 0.21

Number of oxygen molecules ≈ 3.54 mol

Finally, we'll convert the number of moles of oxygen molecules to the actual number of molecules by using Avogadro's number, which is approximately 6.022 x 10^23 molecules/mol:

Number of oxygen molecules = 3.54 mol * (6.022 x 10^23 molecules/mol)

Number of oxygen molecules ≈ 2.13 x 10^24 molecules

Therefore, in a normal breath, there are approximately 2.13 x 10^24 oxygen molecules.

On a large spherical star with a gravitational acceleration of 25 miles per hour, an object thrown at a 30-degree angle with an initial velocity of 100 miles per hour will have a calculated horizontal displacement.

Resolve the initial velocity:

Given the initial velocity of the object is 100 miles per hour and it is launched at an angle of 30 degrees, we need to find its horizontal component. The horizontal component can be calculated using the formula: Vx = V * cos(θ), where V is the initial velocity and θ is the launch angle.

Vx = 100 * cos(30°) = 100 * √3/2 = 50√3 miles per hour.

Calculate the time of flight:

To determine the horizontal displacement, we first need to calculate the time it takes for the object to reach the ground. The time of flight can be determined using the formula: t = 2 * Vy / g, where Vy is the vertical component of the initial velocity and g is the gravitational acceleration.

Since the object is thrown vertically upwards, Vy = V * sin(θ) = 100 * sin(30°) = 100 * 1/2 = 50 miles per hour.

t = 2 * 50 / 25 = 4 hours.

Calculate the horizontal displacement:

With the time of flight determined, we can now find the horizontal displacement using the formula: Dx = Vx * t, where Dx is the horizontal displacement, Vx is the horizontal component of the initial velocity, and t is the time of flight.

Dx = 50√3 * 4 = 200√3 miles.

Therefore, the size of the displacement associated with the object in the horizontal direction, when thrown at an angle of 30 degrees and a speed of 100 miles per hour, on a large spherical star with a gravitational acceleration of 25 miles per hour, would be approximately 100 miles.

To learn more about velocity click here:

brainly.com/question/18084516

#SPJ11

The current flowing through the wire is approximately 3531.97 A. The concept of magnetic forces between current-carrying wires. The force between two parallel conductors is given by the equation:

F = (μ₀ * I₁ * I₂ * L) / (2π * d),

where:

F is the force between the wires,

μ₀ is the permeability of free space (4π x 10^-7 Tm/A),

I₁ and I₂ are the currents in the wires,

L is the length of the wire,

d is the distance between the wires.

In this case, the force acting on the 20 cm wire is equal to its weight. Since it is floating with no tension in its suspension leads, the magnetic force must balance the gravitational force. Let's calculate the force due to gravity first.

Weight = mass * acceleration due to gravity

Weight = 0.016 kg * 9.81 m/s²

Weight = 0.15696 N

F = Weight

(μ₀ * I₁ * I₂ * L) / (2π * d) = Weight

μ₀ = 4π x 10^-7 Tm/A,

L = 0.2 m (20 cm),

d = 2 mm = 0.002 m,

Weight = 0.15696 N,

(4π x 10^-7 Tm/A) * I * (-I) * (0.2 m) / (2π * 0.002 m) = 0.15696 N

I² = (0.15696 N * 2 * 0.002 m) / (4π x 10^-7 Tm/A * 0.2 m)

I² = 0.15696 N * 0.01 / (4π x 10^-7 Tm/A)

I² = 0.015696 / (4π x 10^-7)

I² = 1.244 / 10^-7

I² = 1.244 x 10^7 A²

I = √(1.244 x 10^7 A²)

I ≈ 3531.97 A

Therefore, the current flowing through the wire is approximately 3531.97 A.

Learn more about magnetic forces here : brainly.com/question/10353944

#SPJ11

The force of the weapon recoil is 32,000 N and the soldier experiences an acceleration of 320 m/s².

To find the force of the weapon recoil, we can use Newton's third law of motion, which states that for every action, there is an equal and opposite reaction. In this case, the action is the bullets being fired, and the reaction is the weapon recoil.

Momentum = mass × velocity = 0.4 kg × 1000 m/s = 400 kg·m/s

Since the gun fires 80 bullets per second, the total momentum of the bullets fired per second is:

Total momentum = 80 bullets/second × 400 kg·m/s = 32,000 kg·m/s

According to Newton's third law, the weapon recoil will have an equal and opposite momentum. Therefore, the force of the weapon recoil can be calculated by dividing the change in momentum by the time it takes:

Force = Change in momentum / Time

Assuming the time for each bullet to leave the barrel is negligible, we can use the formula:

Force = Total momentum / Time

Since the time for 80 bullets to be fired is 1 second, the force of the weapon recoil is:

Force = 32,000 kg·m/s / 1 s
F = 32,000 N

Now, to compute the acceleration experienced by the soldier, we can use Newton's second law of motion, which states that the force acting on an object is equal to its mass multiplied by its acceleration:

Force = mass × acceleration

Acceleration = Force / mass

Acceleration = 32,000 N / 100 kg = 320 m/s²

Therefore, the acceleration experienced by the soldier due to the weapon recoil is 320 m/s².

To learn more about Newton's third law: https://brainly.com/question/29768600

#SPJ11

The separation between the two lenses should be 19.21 cm for the final image to be focused at x = ∞.

To determine the separation (s) between the two lenses for the final image to be focused at x = ∞, we need to calculate the image distance formed by each lens and then find the difference between the two image distances.

Let's start by analyzing the diverging lens:

1. Diverging Lens:

   Given: Focal length [tex](f_1)[/tex] = -8.50 cm, Object distance [tex](u_1)[/tex]= -12.0 cm (negative sign indicates object is placed to the left of the lens)

Using the lens formula: [tex]\frac{1}{f_1} =\frac{1}{v_1} -\frac{1}{u_1}[/tex]

Substituting the values, we can solve for the image distance (v1) for the diverging lens.

[tex]\frac{1}{-8.50} =\frac{1}{v_1} -\frac{1}{-12.0}[/tex]

v1 = -30.0 cm.

The negative sign indicates that the image formed by the diverging lens is virtual and located on the same side as the object.

2.Converging Lens:

   Given: Focal length (f2) = 13.0 cm, Object distance (u2) = v1 (image distance from the diverging lens)

Using the lens formula: [tex]\frac{1}{f_2} =\frac{1}{v_2} -\frac{1}{u_2}[/tex]

Substituting the values, we can solve for the image distance (v2) for the converging lens.

[tex]\frac{1}{13.0} =\frac{1}{v_2} -\frac{1}{-30.0}[/tex]

v2 = 10.71 cm.

The positive value indicates that the image formed by the converging lens is real and located on the opposite side of the lens.

Calculating the Separation:

The separation (s) between the two lenses is given by the difference between the image distance of the converging lens (v2) and the focal length of the diverging lens (f1).

[tex]s=v_2-f_1[/tex]

= 10.71 cm - (-8.50 cm)

= 19.21 cm

Therefore, the separation between the two lenses should be 19.21 cm for the final image to be focused at x = ∞.

Learn more about lenses here: brainly.com/question/2289939

#SPJ11

The magnitude of the magnetic force on the charge due to the field is approximately 0.08 N. Hence, the answer is 0.08 N.

The given values are:

Charge, q = 5.1

mC = 5.1 × 10^(-3) Coulomb

Velocity, v = 9 m/s

Magnetic field, B = 3.4 T

Angle between magnetic field and velocity, θ = 30°

The magnitude of the magnetic force on a charged particle moving through a magnetic field is given by the formula:

F = Bqv sin where q is the charge, v is the velocity, B is the magnetic field strength, and  is the angle between the velocity and magnetic field.

Now substitute the given values in the above formula,

F = (3.4 T) × (5.1 × 10^(-3) C) × (9 m/s) sin 30°

F = (3.4) × (5.1 × 10^(-3)) × (9/2)

F = 0.08163 N

Therefore, the magnitude of the magnetic force on the charge due to the field is approximately 0.08 N. Hence, the answer is 0.08 N.

To know more about magnitude, visit:

https://brainly.com/question/31022175

#SPJ11

Mechanical waves are waves that require a medium to travel through. These waves can travel through different mediums, including solids, liquids, and gases. The two main forms of mechanical waves are transverse waves and longitudinal waves.

Mechanical waves are the waves which require a medium for their propagation. A medium is a substance through which a mechanical wave travels. The medium can be a solid, liquid, or gas. These waves transfer energy from one place to another by the transfer of momentum and can be described by their wavelength, frequency, amplitude, and speed.There are two main forms of mechanical waves, transverse waves and longitudinal waves. In transverse waves, the oscillations of particles are perpendicular to the direction of wave propagation.

Transverse waves can be observed in the motion of a string, water waves, and electromagnetic waves. Electromagnetic waves are transverse waves but do not require a medium for their propagation. Examples of electromagnetic waves are radio waves, light waves, and X-rays. In longitudinal waves, the oscillations of particles are parallel to the direction of wave propagation. Sound waves are examples of longitudinal waves where the particles of air or water oscillate parallel to the direction of the sound wave.

In conclusion, transverse and longitudinal waves are two main forms of mechanical waves. Transverse waves occur when the oscillations of particles are perpendicular to the direction of wave propagation. Longitudinal waves occur when the oscillations of particles are parallel to the direction of wave propagation. The speed, frequency, wavelength, and amplitude of a wave are its important characteristics. The medium, through which a wave travels, can be a solid, liquid, or gas. Electromagnetic waves are also transverse waves but do not require a medium for their propagation.

To know more about Mechanical waves visit:

brainly.com/question/18207137

#SPJ11

In an AC circuit, the voltage and current vary sinusoidally over time. The peak voltage (Vp) refers to the maximum value reached by the voltage waveform.

The RMS voltage (Vrms) is obtained by dividing the peak voltage by the square root of 2 (Vrms = Vp/√2). This value represents the equivalent DC voltage that would deliver the same amount of power in a resistive circuit.

Vrms = 120/√2, resulting in Vrms = 84.85 V.

P = Vrms^2/R, where P represents the average power and R is the resistance.

Plugging in the values, we have P = (84.85)^2 / 10, which simplifies to P = 720 W.

Therefore, the average power dissipated in the resistor is 720 watts. This value indicates the rate at which energy is converted to heat in the resistor.

It's worth noting that the average power dissipated can also be calculated using the formula P = (Vrms * Irms) * cosφ, where Irms is the RMS current and cosφ is the power factor.

However, in this scenario, the given information only includes the peak voltage and the resistance, making the first method more appropriate for calculation.

Overall, the average power dissipated in the resistor is a crucial factor to consider when analyzing AC circuits, as it determines the energy consumption and heat generation in the circuit component.

know more about Voltage here : brainly.com/question/29867409

#SPJ11