What muscle movement do we use to close a joint.
Answer: Your using your skeletal muscle
Explanation:
28. A student notices that when a weight is hung on a spring, the spring stretches. She decides to conduct an experiment to determine the relationship between the amount of weight
placed on a spring and the distance the spring stretches. She has five different weights: 25 9,50 9.75 9. 100 9, and 125 g. She selects a weight, hangs it on the spring, and
measures how far the spring stretches
What is the independent variable in this experiment?
length of unst etched spring
distance the spring stretches
weight hung from the spring
O temperature of the spring
Answer:
C). weight hung from the spring
Explanation:
An Independent variable is characterized as the variable that is controlled or manipulated by the experimenter in order to observe its change on the dependent variable.
In the given experiment, 'weight hung from the spring' is the independent variable as it is manipulated by the researcher in order to witness its impact on the dependent variable(how the spring stretches). It is the cause that causes an effect on the dependent variable. Any change in the former directly affects the latter. Thus, option C is the correct answer.
How does the number of batteries affect the strength of an electromagnet?
Answer:
The answer is below
Explanation:
It has been observed that the strength of electromagnets is based on the electrical current passing through their wires.
However, the number of batteries can affect the strength of electromagnets if only the electromagnet's resistance is what's hindering the current.
This can be observed when multiple batteries are connected thereby increasing the degrees of voltage across the electromagnet.
True or False? Will mark Brainlest
Answer:
False
Explanation:
They had no free oxygen though they has oceans forming and it was very hot and today is much different hope that helps!
A body moving in a straight line has a uniform motion if it travels ---------- distance in -------- intervals og time
Answer:
uniform an uniform
please fill it like yhis
You bought a helium balloon for a friend’s winter birthday. The outside temperature was -34 degrees C. The store was at a comfortable 298K. The volume of the balloon immediately after the store clerk filled it was 6 liters. What was the volume after you brought it outside? Show your work. Make sure to include units.
Answer:
4.81 L
Explanation:
From the question given above, we obtained the following information:
Initial temperature (T₁) = 298 K
Initial Volume (V₁) = 6 L
Final Temperature (T₂) = – 34 °C
Final Volume (V₂) =?
Next, we shall convert – 34 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
T(°C) = – 34 °C
T(K) = – 34 + 273
T(K) = 239 K
Thus, –34 °C is equivalent to 239 K
Finally, we shall determine the final volume of the balloon as follow:
Initial temperature (T₁) = 298 K
Initial Volume (V₁) = 6 L
Final Temperature (T₂) = 239 K
Final Volume (V₂) =?
V₁ / T₁ = V₂ / T₂
6 / 298 = V₂ / 239
Cross multiply
298 × V₂ = 6 × 239
298 × V₂ = 1434
Divide both side by 298
V₂ = 1434 / 298
V₂ = 4.81 L
Thus, the volume of the balloon when it was brought outside the store was 4.81 L.
A fish swimming at a rate of .6 m/s notices a huge shark. Three seconds later, the fish is swimming at a speed of 3 m/s. What is the fish's acceleration?
0.8 m/s/s
-0.8 m/s/s
12.5 m/s/s
-12.5 m/s/s
Answer:
C
Explanation:
???
i think
An object at rest has no net force acting on it.
True or False
Answer:
True
Explanation:
The object is at rest, which means it's not moving, so there is no net force on it, according to Newton's First Law.
A 75kg bicyclist (including the bicycle), initially at rest at the top of a hill, coasts down the hill, reaching a speed of 14.6m/s at the bottom of the hill. The distance and height of the hill are shown. Neglect any friction impeding the motion and the rotational energy of the wheels. List the energy types at the initial and final time and whether work and loss (due to non-conservative forces) occur as well as the corresponding amounts of energy.
The energy type at the initial time is potential energy and the energy at the final time or position is kinetic energy.
What is the law of conservation of energy?The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.
Based on the law of conservation of mechanical energy, the formula for the change in the kinetic energy and the potential energy of the bicyclist is given as;
K.Ei + P.Ei = K.Ef + P.Ef
where;
K.Ei is the initial kinetic energy of the bicyclistK.Ef is the final kinetic energy of the bicyclistP.Ei is the initial potential energy of the bicyclistP.Ef is the final potential energy of the bicyclistThe kinetic energy of the bicyclist increases with increase in the velocity of the bicyclist while the potential energy increases with increase in the height of the bicyclist.
At the initial position when the bicyclist is at rest, the kinetic energy is zero, so the only energy at the initial position is potential energy because the height is maximum.
In addition, at the final position, the velocity of the bicyclist is maximum and the height is zero, so the only energy at the final position is kinetic energy.
Learn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
what is it that makes a magnet different from a piece of iron that is not mangetic?
Answer:
Under normal conditions, a magnetic material like iron doesn't behave like a magnet because the domains don't have a preferred direction of alignment. On the other hand, the domains of a magnet (or a magnetized iron) are all aligned in s specific direction.
Shows a car travelling around a bend in the road. The car is travelling at a constant speed. There is a resultant force acting on the car. This resultant force is called the centripetal force. (i) In which direction, A, B, C or D, does the centripetal force act on the car? Tick ( ) one box. A B C D (1) (ii) State the name of the force that provides the centripetal force.
Answer:
This question is incomplete
Explanation:
This question is incomplete but the missing figure is in the attachment below.
When an object is travelling around a circular path, there is a force that tends to draw that object towards the center of the circular path and keep the object moving in the curved path, that force is called the centripetal force. From this description, it can be deduced that the direction of the centripetal force that acts on the car (in the attachment below) is D.
The name of the force that provides this centripetal force is frictional force. This is the force that prevents the car from slipping off the road; keeping it moving in the curved path.
how big is the universe?
sorry this is so random
Answer:
Explanation: 46 billion light years I think
Aww I wanted brainliest:( be doggo, doggo sad :(
HELP! WILL GIVE BRAINLIST!!!
- What effect do oceans have on the climate?
a. Oceans produce extreme cold.
b. Oceans moderate temperatures and climate.
c. Oceans have little effect climate.
d. Oceans create extreme temperatures.
Answer:
b. Oceans moderate temperatures and climate.
Explanation:
i had this on my quiz and it was right =]
If the velocity of an object changed from 30 m/s to 60 m/s over a period of 10 seconds what would the average acceleration be ?
What is asexual reproduction?
List the various and describe four types of asexual reproduction.
What is sexual reproduction?
Why is sexual reproduction beneficial?
Answer:
there are a number of types of asexual reproduction including fission, fragmentation, budding, vegetative reproduction, spore formation and gamogenesis. Spore formation occurs in plants, and some algae and fungi, and will be discussed in additional concepts
the production of new living organisms by combining genetic information from two individuals of different types (sexes). In most higher organisms, one sex (male) produces a small motile gamete which travels to fuse with a larger stationary gamete produced by the other (female)
The advantages of sexual reproduction: produces genetic variation in the offspring. the species can adapt to new environments due to variation, which gives them a survival advantage. a disease is less likely to affect all the individuals in a population.
Explanation:
Physical values in the real world have two components: magnitude and
Answer:
Dimension.
Explanation:
4. Bob creates his personal profile collage by drawing his favorite things. This is his ___________.
A. artistic self
B. social self
C. professional self
D. private self
An object that falls and accelerates solely as a result of gravity is said to be in
(2 points)
A. terminal velocity
B. free fall
C. air resistance
D. terminal acceleration
9. A student notices that wearing darker colors in sunlight makes him feel warmer, so he decides to conduct an experiment. He takes five pieces of different
colored cloth and wraps
each one around a water bottle. He then places all five bottles in direct sunlight and measures the temperature of the water in each bottle an hour later
What is the dependent variable in this experiment?
O the time he leaves it in the sunlight
O the amount of water in each bottle
O the color of the cloth
O the temperature of the water
Answer: 4
Explanation:
The dependent variable is the temperature of the water.
WRITE A PARAGRAPH ABOUT PRESSURE
Answer:
pressure is a horrible thing to go through, it can lead to many bad side effects, like burn out and it can also lead to high blood pressure, head aches, heart problems, depression, anxiety, and many more damaging effects. Pressure can destroy someones mental health if not dealed worth properly
I hope this is okay! I'm not sure what pressure you meant
(HELP PLEASE)What are some reasons people produce synthetic materials?
Answer:
Explanation:
Synthetic fabrics, such as nylon and polyester, are produced entirely from chemicals. Natural fabrics, such as cotton, silk, and wool are made of fibres from plants and animals. Synthetic fabrics are useful because they have very different or enhanced (improved) properties in comparison to natural materials.
A pinball bangs against a bumper of a pinball machine with a speed of 0.46 m/s. If the ball has a mass of 0.058 kg, what is the ball's kinetic energy?
Answer:
either its 12 or 0.402
Explanation:
As a horse finishes its trot around the corral, it slows from 4m/s to a stop in 3
seconds. Calculate the acceleration of the horse.
5) A 20.0 kg cart with no friction wheels sits on a table. A light string is attached to it and runs over a low friction pulley to a 0.0150 kg mass.
Draw a free body diagram showing all the forces acting on each object
Calculate the acceleration of the masses
Calculate the tension force in the cord
How long will it take the block to get to go 1.2 m to the edge of the table.
What will the velocity be as soon as it gets to the edge?
Answer:
1) Please find attached, created with Microsoft Visio
2) The acceleration of the masses connected by the light string is 0.00735 m/s²
3) The tension in the cord is 0.147 N
4) The time it would take the block to go 1.2 m to the edge of the table is approximately 18.07 s
5) The velocity of the cart as soon as it gets to the edge of the table is 0.042 m/s
Explanation:
1) Please find attached, the required free body diagram, showing the tension, weight and frictional (zero friction) forces acting on the cart and the mass created with Microsoft Visio
2) The acceleration of the masses connected by the light string is given as follows;
F = Mass, m × Acceleration, a
The mass of the truck, M = 20.0 kg
The mass attached to the string, hanging rom the pulley, m = 0.0150 kg
The force, F acting on the system = The pulling force on the cart = The tension on the cable = The weight of the hanging mass = 0.0150 × 9.8 = 0.147 N
The pulling force acting on the cart, F = M × a
∴ F = 0.147 N = 20.0 kg × a
a = 0.147 N/(20.0 kg) = 0.00735 m/s²
The acceleration of the truck = a = 0.00735 m/s²
3) The tension in the cord = F = 0.147 N
4) The time, t, it would take the block to go 1.2 m to the edge of the table is given by the kinematic equation, s = u·t + 1/2·a·t²
Where;
s = The distance to the edge of the table = 1.2 m
u = The initial velocity = 0 m/s (The cart is assumed to be initially at rest)
a = The acceleration of the cart = 0.00735 m/s²
t = The time taken
Substituting the known values, gives;
s = u·t + 1/2·a·t²
1.2 = 0 × t + 1/2 ×0.00735 × t²
1.2 = 1/2 ×0.00735 × t²
t² = 1.2/(1/2 ×0.00735) ≈ 326.5306
t = √(1.2/(1/2 ×0.00735)) ≈ 18.07
The time it would take the block to go 1.2 m to the edge of the table = t ≈ 18.07 s
5) The velocity, v, of the cart as soon as it gets to the edge of the table is given by the kinematic equation, v² = u² + 2·a·s as follows;
v² = u² + 2·a·s
u = 0 m/s
v² = 0² + 2 × 0.00735 × 1.2 = 0.001764
v = √(0.001764) = 0.042
The velocity of the cart as soon as it gets to the edge of the table = v = 0.042 m/s.
Answer:
There's no answer I'm just taking points like you did me, so thank you for your points I'll put them to good use ;)
An illustration of a ball sitting at the top of a hill of height labeled h Subscript 1 Baseline = 2 m. A the the bottom of the hill it levels off and the leveled surface is at a height labeled h Subscript 2 Baseline = .5 m. A ball is released from the top of a hill. How fast is the ball going when it reaches the base of the hill? Approximate g as 10 m/s2 and round the answer to the nearest tenth. m/s
Answer:
5.5 m/s
Explanation:
Right on Edge
The statement explains the importance of enzymes that check for and repair mistakes during DNA replication is the enzymes prevent many genetic mutations from being expressed. Thus, the option C is correct.
What is RNA polymerase?RNA polymerase is an enzyme that aids in the transcription of DNA into RNA during transcript in the nucleus. The enzymes prevent many genetic mutations from being expressed.
Primase is an enzyme that synthesizes short RNA sequences called primers. These primers serve as a starting point for DNA synthesis during replication as the DNA polymerases cannot begin the synthesis of the new strand, they only extend it after primase begins it and primase produces RNA molecules, the enzyme can be said to be a type of RNA polymerase.
Therefore, The statement explains the importance of enzymes that check for and repair mistakes during DNA replication is the enzymes prevent many genetic mutations from being expressed. Thus, the option C is correct.
Learn more about genetic mutations on:
brainly.com/question/1282397
#SPJ6
help me with this please :((
Answer:
huh?
Explanation:
Hurricane or typhoons occur when large areas of the open ocean soak up heat from the sun t or f
Answer: true
Explanation:
Two soccer players run toward each other. One player has a mass of 85 kg
and runs west with a speed of 8 m/s, while the other has a mass of 105 kg
and runs east with a speed of 7 m/s. What is the total momentum of the
system made up of the two players?
Answer:
Total momentum, p = 55 kg-m/s
It is given that,
Mass of player 1, m₁ = 85 kg
Mass of player 2, m₂ = 105 kg
Speed of player 1, v₁ = -8 m/s (west)
Speed of player 2, v₂ = 7 m/s (east)
Momentum is equal to the product of mass and velocity. For this system, momentum is given by :
p=m_1v_1+m_2v_2p=m
1
v
1
+m
2
v
2
p=85\ kg\times (-8\ m/s)+105\ kg\times 7\ m/sp=85 kg×(−8 m/s)+105 kg×7 m/s
p = 55 kg-m/s
The total momentum of the system made up of the two players is 55 kg-m/s.
Answer:
p = 55 kg * m/s east
Explanation:
The answer above explains it neatly, but leaves the direction out of the answer. The player heading east has more momentum, so the net momentum of the system is east.
- During a certain period, the angular position of a rotating object is given by: = − + , where is in radian and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the rotating object at = Sec.
The question is not complete. The complete question is :
During a certain period of time, the angular position of a rotating object is given by [tex]$\theta =2t^2 +10t+5$[/tex], where θ is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door (a) at t = 0.00 seconds, (b) at t = 3.00 seconds.
Solution :
Given :
Displacement or angular position of the object, [tex]$\theta =2t^2 +10t+5$[/tex]
∴ Angular speed is [tex]$\omega = \frac{d \theta}{dt}$[/tex]
ω = 10 + 4t
And angular acceleration is [tex]$\alpha = \frac{d \omega}{dt}$[/tex]
α = 4
a). At time, t = 0.00 seconds :
Angular displacement is [tex]$\theta =2t^2 +10t+5$[/tex]
[tex]$\theta =2(0)^2 +10(0)+5$[/tex]
= 5 rad
Angular speed is ω = 10 + 4t
ω = 10 + 4(0)
= 10 rad/s
Angular acceleration is α = 4 [tex]$rad/s^2$[/tex]
b). At time, t = 3.00 seconds :
Angular displacement is [tex]$\theta =2t^2 +10t+5$[/tex]
[tex]$\theta =2(3)^2 +10(3)+5$[/tex]
= 53 rad
Angular speed is ω = 10 + 4t
ω = 10 + 4(3)
= 22 rad/s
Angular acceleration is α = 4 [tex]$rad/s^2$[/tex]
Read this quotation:
"… my father, the King, is old and feeble. He has only me to help him take care of his people. This terrible dragon has driven them from their homes, carried away their cattle, and ruined their crops."
Which character says these words?
St. George
the Princess in "Robin Hood and the Golden Arrow"
the Princess in "The Last of the Dragons"
the Princess in "St. George and the Dragon"
Answer:
the Princess in "St. George and the Dragon"
Answer:
The princess in st. George and the dragon
Explanation:
Have a good day