The diagram shows the setup of an experiment. A few observations of the experiment are listed in the table below the diagram.

A beaker filled three-fourths with a liquid labeled colorless silver nitrate solution is shown. A small strip is shown inside the beaker. The strip is labeled copper strip. The title of the image is Experimental Setup.


Experimental Observations
Observation Description
1 Solution turned blue
2 Gray particles were deposited on the edge of the strip


Which of the following is the correct explanation for one of the given observations?
Observation 2 is a result of nitrate ions moving into the solution.
Observation 1 is a result of copper ions moving into the solution.
Observation 1 is a result of silver atoms losing one electron.
Observation 2 is a result of silver ions losing one electron.

Answer:

The solar system speed and Milky Way speed should be switched

Explanation:

Answer:

Explanation:

The solar system speed and Milky Way speed should be switched

Answer:

0.00883 mol

Explanation:

Let's consider the reduction reaction of gallium.

Ga³⁺(aq) + 3 e⁻ ⇒ Ga(s)

We can establish the following relationships:

The amount of Ga deposited using a current of 0.710 A that flows for 60.0 min is:

[tex]60.0min \times \frac{60s}{1min} \times \frac{0.710C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molGa}{3mole^{-}} = 0.00883 molGa[/tex]

Answer:

2.5%

Explanation:

Given

M1 = 7.50%

M2 = ?

V1 = 25.0mL

V2 = 75.00mL

M1V1=M2V2

7.5x25=M2x75

M2=2.5%

The NaCl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml is 2.5 (m/v)%.

Solution is defined as a continuous variation of two or more substances in their relative proportions up to what is known as the limit of solubility.  A solute is the name for the substance that dissolves to create a solution. A solvent is the material that a solute will dissolve in. Sugar is the solute and water is the solvent in a sugar-water solution.

To calculate the molarity of NaCl

We use M1V1 = M2V2

Given M1 = 7.50 (m/v)%

V1 = 25.0 ml

V2 = 75.0 ml

M2 = M1 V1 / V2

M2 = 7.50 x 25.0 / 75.0

M2 = 2.5 (m/v)%

Thus, the NaCl of a solution made by diluting 25.0 ml of a 7.50 (m/v)% NaCl solution to a total volume of 75.00 ml is 2.5 (m/v)%.

To learn more about solution, refer to the link below:

https://brainly.com/question/7932885

#SPJ2

Answer:

yes but first he need to check himself

Explanation:

bcoz if he cannot produce a sperm than she might have cheated him and the baby might be of someone other.

ANSWER: Things like salt, sugar and coffee dissolve in water. They are soluble. They usually dissolve faster and better in warm or hot water.

Answer:

Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i

Explanation:

Answer:

Leeunwenhoek

Explanation:

Anton Von Leeunwenhoek was the first scientist to observe live cells and in greater details. He described spirogyra in the mid 15th century.

Answer:

A polar covalent bond

Explanation:

When the absolute value of the difference in electronegativity of two bonded atoms is between 0.4 and 1.8 they tend to form polar covalent bonds.

Answer:

Answer:

Following are the solution to this question:

Explanation:

[tex]\to HCl \ mol = \frac{23.1 \ g}{36.5 \frac{g}{mol}} = 0.633 \ mole\\\\\\\to HCl \ molarity = \frac{ 0.633 \ mole }{1.25 L} \\\\[/tex]

                            [tex]=0.5064 \ m[/tex]

 [tex]HCl +H_2O \longrightarrow H_3O^{+} + Cl^{-}\\\\\\[/tex]

[tex][H_3O^{+}] =[HCl] \\\\\to [H_3O^{+}] =0.5064 \ m \\\\\to PH =-\log [H_3O^{+}] \\\\[/tex]

          [tex]= -\log (0.5064)\\\\= 0.295 \\\\=0.3[/tex]

Answer:

1000

Explanation:

PLS GIVE BRAINLIEST

Answer: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%. This is because 1-methylcyclohexene is the major product with the more stable carbocation intermediate and 3-methylcyclohexene is the minor product with the less stable carbocation intermediate.

Explanation: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%

Answer:

an element.

Explanation:

it is the purest form

Answer:

b

Explanation:

Answer:

whats the question

Explanation:

Answer:

Calculate the average atomic mass of argon to two decimal places, given the following relative masses and abundances of each of the isotopes: argon-36 (35.97 amu; 0.337%), argon-38 (37.96 amu; 0.063%), and argon-40 (39.96 amu; 99.600%). ... So the atomic mass of Ar is 0.99639. 96 + 0.0006337. 96 + 0.00337*35.97 = 39.957.

Explanation:

hope this help

Answer:

Noble gases... (You already know...)

Explanation:

The right-most column of the periodic table contains atoms with full electron shells, also known as Noble Gases.

Hope this helped!

Answer:

Noble gases

Explanation:

The six elements listed in the last column of the table (Group 18) of the periodic table are collectively referred to as the noble gases. All of the noble gases have the maximum number of electrons possible in their outer shells (two electrons in helium’s outer shell, and eight electrons for all the others), making them stable.

Answer:

Of the main group elements, fluorine has the highest electronegativity (EN = 4.0) and cesium the lowest (EN = 0.79). This indicates that fluorine has a high tendency to gain electrons from other elements with lower electronegativities.

Explanation:

Answer:

π = 7.33atm

Explanation:

Osmotic pressure is defined as the pressure that must be applied to stop the mass transfer when a semipermeable membrane separates it of pure water. The equation is:

π = M×R×T

Where P is osmotic pressure

M is molar mass = 0.30M

R is gas constant = 0.082atmL/molK

And T is absolute temperature = 25°C + 273.15 = 298.15K

π = 0.30M×0.082atmL/molK×298.15K

Osmotic pressure of human blood at 25 degree C or at absolute temperature is equal to 7.33 atm.

What is osmotic pressure?

It is defined as the minimum pressure exerted on the solution, which is required to stop the flow of pure solvent from low concentration to high concentration through the semi permeable membrane.

Osmotic pressure can be calculted as :

P = M × R × T

Where, P = Osmotic pressure

M = Molar mass = 0.30 M (given)

R = Universal gas constant = 0.082 atmL/molK

T = Absolute temperature 25 degree C = 25⁰C + 273.15 = 298.15 K

Putting all these values in the given equation, we get:

P = 0.30 × 0.082 × 298.15 = 7.33 atm

Hence, 7.33 atm is the osmotic pressure of blood at 25⁰C .

To know more about osmotic pressure, do visit below link:

https://brainly.com/question/4203774

Answer:

Cell

Explanation:

I just passed this unit a month ago.

Answer:

It is 6. Cell

Explanation:

Cells make up the smallest level of a living organism such as yourself and other living things. The cellular level of an organism is where the metabolic processes occur that keep the organism alive. That is why the cell is called the fundamental unit of life.

I really hope this helped. God bless you and have a great day! :-)

Answer:

The answer is "it can tarnish"

Explanation:

The statement describes an example of a chemical property of a metal statue is that it can tarnish.

Chemical properties are defined as those properties which become evident during or after a chemical reaction  has taken place.

These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and used for building up chemical classifications.

The major chemical properties include flammability,toxicity,reactivity,acidity and heat of combustion.For a chemical property to be apparent , it is necessary that the structure of the substance is altered.

Learn more about chemical property,here:

https://brainly.com/question/1935242

#SPJ7

Answer:

6.24 % of FeSO₄

Explanation:

Solute mass: 5.01 g of FeSO₄

Solvent mass: 75.3 g of water

Solution mass = solute mass + solvent mass

5.01 g + 75.3 g = 80.31 g

We can apply a rule of three. Mass percentage means the mass of solute which is contained in 100 g of solution. Then,

In 80.31 g of solution we have 5.01 g of solute

In 100 g solution, we may have (5.01  . 100)/ 80.31 = 6.24 g of solute.

This is the mass percentage: 6.24%

Answer:

OB: weathering

Explanation:

the cycle of heating and cooling causes stresses called thermal fatigue, this causes the material to break down. In hand, weathering is a physical and chemical process that causes rocks and minerals on the Earth's surface to break down and decompose. Therefore, this matches the process you have described.

Answer:

weathering fun way to imagen it: just imagen u saw ur worst enemie and pretende it is the rock and the wind and ice and water are ur best friends THEN BAM wind and ice and water(ur best friends) make the rock(worst enemie) to dust :D

Answer: Atoms of carbon and hydrogen

Explanation:

Answer:

1.092

Explanation:

Density = 1.0192 g/mL

oecific gravity = ?

Specific gravity is the ratio of a material's density with that of water.

The density of water at 4 degrees Celsius =  1 g/mL

Specific gravity = 1.0192 / 1 = 1.0192

Because specific gravity is a ratio, it has no dimension.

Answer:

C. Alkaline Metal ok thanks

Answer:

0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.

Explanation:

Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.

To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:

Moles KHP -Molar mass: 204.22g/mol-:

0.198g * (1mol / 204.22g) = 0.0009695 moles KHP

Molarity:

0.0009695 moles KHP / 0.125L = 0.007756M KHP

NaOH reacts with KHP as follows:

NaOH + KHP → Na⁺ + KP⁻ + H₂O

That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:

0.0009695 moles NaOH reacts

In 27.80mL = 0.02780L the NaOH was contained. Molarity is:

0.0009695 moles NaOH / 0.02780L =

0.03488M NaOH

Moles of NaOH added will be "0.034".

According to the question,

→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]

By substituting the values, we get

                  [tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]

                  [tex]= 0.0077 \ M[/tex]

Let,

Now,

→            [tex]M_1 V_1 = M_2 V_2[/tex]

→ [tex]0.0077\times 125=M_2\times 27.8[/tex]

→                [tex]M_2 = 0.034 \ moles[/tex]

Thus the above answer is appropriate.

Learn more:

https://brainly.com/question/23931328

Answer:

The elements that have the same number of energy levels or the orbitals.

Explanation:

They have he same number -- energy levels

Answer:

c. SP2

Explanation:

The image in the diagram below shows the structure of  NO₃⁻

Nitrogen is the central atom with the electronic configuration of 1s² 2s² 2p³.

So in its outermost shell, it has 3 electrons and the hybridization is sp²

However,

According to Hund's rule:

The ground state of Nitrogen is;    

1s²    2s²   2p³

↑↓     ↑      ↑  ↑  ↑

At the excited state when it is attached to 3 different oxygen ions, we have:

                1s²     2s²        2p⁵

O⁻ --->     ↑↓      ↑↓     ↑↓    ↑↓   ↑      

                1s²     2s²        2p⁵

O⁻ --->     ↑↓      ↑↓     ↑↓    ↑↓   ↑

                1s²     2s²        2p⁴

O⁻ --->     ↑↓      ↑↓     ↑↓    ↑   ↑

Thus, the 3 sp² orbital lies in a plane and form 3 N - O σ- bond and one π- bond.

Answer:

Average weather conditions of a region over the long term

Explanation:

Climate is the long-term average of weather, typically averaged over a period of 30 years. More rigorously, it denotes the mean and variability of meteorological variables over a time spanning from months to millions of years.

Answer: true

Explanation: Collection and analysis of data indicates that constructive forces include crustal deformation, faulting, volcanic eruption and deposition of sediment, while destructive forces include weathering and erosion.