The molarity of the solution and the number of moles of the solute can be used to calculate the volume of a solution. Blood serum at a concentration of 0.14 M and 2g of NaCl is 0.24 L in volume.
The term "molarity" of a material refers to its concentration. It is the proportion of the solute's moles to the liters of solution. Temperature affects a substance's molarity.
The number of moles of solute and the volume of the solution both affects the molarity of the solution. The blood serum has a molarity of 0.14 and 20g of sodium chloride.
NaCl has a molar mass of 58.5 g/mol. The following formula is used to determine how many moles of NaCl are present in the 2 g sample:
2 g = 58.5 moles in terms of moles.
= 0.034 moles.
Now, the blood serum volume is determined using the formula below:
Volume is equal to moles times molarity.
= 0.14 mol/L and 0.034 moles
= 0.24 liter.
As a result, 0.24 L of 0.14 M blood serum contains 2 g of NaCl.
Visit the following link to learn more about molarity:
brainly.com/question/2817451
#SPJ4
determine the michaelis constant, the maxmium velocity of the reaction, the turnover number and the catalytic efficiency
The substrate concentration at which a reaction progresses at half its maximum velocity is known as the Michaelis constant, or Km. The affinities are most precisely represented by this constant.
A high Michaelis constant: what does that mean?
The Michaelis constant is a measure of the substrate's affinity for the enzyme; a small value implies high affinity, suggesting that the rate will approach with lower than those processes with a higher value. Its value is numerically equivalent to the at which the reaction rate is at half-maximum.
The significance of a low Michaelis-Menten constant
The enzyme's affinity for the molecules of the substrate is represented by the Michaelis-Menten constant. Less substrate concentration will be required if the enzyme has a high affinity for the substrate.
To know more about Michaelis constant visit:
https://brainly.com/question/25657597
#SPJ4
what quantity of heat (in kj) will be released if 1.20 mol of sro is mixed with 0.951 mol of co₂ in the following chemical reaction? sro (s) co₂ (g) → srco₃ (s) ∆h°
In this case, we will calculate -222.53 kilojoules. The exchange of heat from a high-temperature object to a low-temperature object is referred to as heat transfer.
How to solve?Complete question: How much heat will be released (∆H) if 1.20 mol of SrO is mixed with 0.951 mol of CO₂ in the following chemical reaction? SrO (s) + CO₂ (g) → SrCO₃ (s) ∆H° = -234 kJ/mol?
- 1 moles of SrO reacts with 1 mole of CO2,therefore,
1.20 mol of SrO should react with 0.951 x 1 =0.951 moles of CO2
SrO is limiting reagent and CO2 is excess reagent
1 moles of SrO releases -234 KJ/mol of energy
1.20 mole SrO will release -234KJ/mol x 0.951 = -222.53 KJ/mol of energy
Answer: -222.53 KJ/mol
What causes heat to be released?Heat is released during an exothermic reaction, raising the temperature of the immediate environment. The environment is cooled by an endothermic process that absorbs heat.
What is the heat transfer equation?The formula for heat transfer is Q=m.c.T, where Q is the amount of heat transmitted, m is the mass, c is the specific heat, and t is the temperature change.
Learn more about combustion here:
https://brainly.com/question/13153771
#SPJ4
which statement is true? which statement is true? in a reaction, oxidation can occur independently of reduction. a redox reaction involves either the transfer of an electron or a change in the oxidation state of an element. if any of the reactants or products in a reaction contain oxygen, the reaction is a redox reaction. redox reaction is a reaction in which there is a change in the oxidation states of atoms in going from reactants to products.
In a redox reaction, any increase in the oxidation state of a reacant must be accompanied by a decrease in the oxidation state of a reactant.if any of the reactants or products in a reaction contain oxygen, the reaction is a redox reaction. redox reaction is a reaction in which there is a change in the oxidation states of atoms in going from reactants to products.
a chemical process that occurs when an object comes into touch with oxygen or another oxidizer. Rust and an apple's brown color are examples of oxidation. There is an oxidation reaction when oxygen interacts with a substance or an element. The process of removing hydrogen from the reactant species is another definition of oxidation. A molecule, atom, or ion undergoes oxidation when it loses electrons.
Reactions where electrons are gained are referred to as reduction, whereas reactions where electrons are lost are referred to as oxidation.
Learn more about oxidation here:
https://brainly.com/question/16976470
#SPJ4
Answer:
a reaction in which the exchange of electrons (oxygen) occurs.
Explanation:
the curved arrow notation is a powerful method used by organic chemists to show the movement of electrons not only in resonance structures, but also in chemical reactions. since each curved arrow shows the movement of two electrons, following the curved arrows illustrates the bonds that are broken and formed in the reaction. consider the following reaction. use the curved arrows drawn in the reaction to draw the structure of x. x is converted in the following step to phenol and hcl.
When a compound's qualities cannot be fully explained by a single structure, we require more structures. These additional structures are known as resonance structures, and the phenomenon they describe is known as resonance.
Resonance is the term used to describe the phenomena of enhanced amplitude that happens when the frequency of a periodic force is applied (or a Fourier component of it) is equal to or nearly equal to the natural frequency of the system on which it works. In contrast to when the same oscillating force is applied at other, non-resonant frequencies, a dynamic system will oscillate at a higher amplitude when the oscillating force is applied at its resonant frequency.
Resonant frequencies or resonance frequencies of the system are frequencies at which the response amplitude is a relative maximum. Small periodic forces that are close to a resonant frequency of the system can produce large amplitude oscillations in the system due to the storage of vibrational energy.
Learn more about resonance here: brainly.com/question/28318319
#SPJ4
Which gas law can be used to calculate the pressure of hydrogen gas collected over water.
Calculating the tension of hydrogen gas gathered over water is possible using Dalton's Law of Equivalent Pressures.
Is hydrogen a liquid or a gas?Around room temperature and pressure, hydrogen is a gas, but at -423 degrees Fahrenheit, it condenses into a liquid (minus 253 degrees Celsius).
Can fuel be made from hydrogen?The gasoline for engines with internal combustion can also be hydrogen. These, however, are less effective than FCEVs and emit tailpipe pollutants. Try reading up on fuel cells. A gallon of gasoline (6.2 kilograms, 2.8 kilograms) has approximately the same amount of energy as 2.2 gbp (1 kilogram) of hydrogen.
To know more about Hydrogen visit:
https://brainly.com/question/28937951
#SPJ4
Phosphorus trichloride is used in the production of chemicals that keep plants from growing in a specific area. This compound is made of phosphorus and chlorine atoms. What two symbols would make up the chemical formula of this covalent compound? p and c p and cl pr and ce pr and cr.
Option b; Phosphorus trichloride is used in the production of chemicals that keep plants from growing in a specific area. This compound is made of phosphorus and chlorine atoms. Two symbols are p and cl.
An inorganic substance with the chemical formula PCl3 is phosphorus trichloride. It is a significant industrial chemical that is used to make phosphites and other organophosphorus compounds. When pure, it is a colorless liquid. It is poisonous and easily combines with water to produce hydrogen chloride. Over one million tones are produced globally. Industrially, white phosphorus and chlorine are combined while utilizing phosphorus trichloride as a solvent to create phosphorus trichloride. In this ongoing procedure, PCl3 is eliminated as it forms to prevent the creation of PCl5. It is triangular and pyramidal in shape. Regarding a standard for phosphoric acid, its 31P NMR spectrum shows a singlet at about +220 ppm.
Learn more about Phosphorus trichloride here:
https://brainly.com/question/15585818
#SPJ4
compare the structures of cellulose and amylose. what is the same about the two figures? what is different? what stabilizes these structures
They both lack branching chains. They are carbohydrate linear polymers connected by 1,4 links. Both of them are sophisticated polysaccharides. Cellulose creates long, chains, whereas Starch is shaped like a helix.
What purpose does cellulose serve?Paper, board, including textile made from cotton, flax, and other plant fibers mostly consist of cellulose. Additionally, it is employed in the creation of cellulose derivatives, films, and fibers.
What foods have a high cellulose content?Vegetables with roots and leaves, beans, and also some fruits like pears and apples all contain significant amounts of cellulose. Fruits, especially berries and peaches, have the highest lignin concentration, whereas apples and citrus fruits have the highest pectin levels.
To know more about Cellulose visit:
https://brainly.com/question/2687863
#SPJ4
sulfur is in the same column of the periodic table as oxygen but it is less electronegative than oxygen. compared to water molecules, how will the h2s molecules behave?sulfur is in the same column of the periodic table as oxygen but it is less electronegative than oxygen. compared to water molecules, how will the h2s molecules behave?not be able to form hydrogen bonds with each otherhave a higher capacity to absorb heat for the same change in temperaturehave greater cohesion to other h2s moleculeshave a greater tendency to form hydrogen bonds with each other
Sulfur is in the same column of the periodic table as oxygen but it is less electronegative than oxygen , the H₂S molecules will behave as not be able to form hydrogen bonds with each other.
The hydrogen bond is the type of the dipole dipole interaction between the molecules directly attached to the more electronegative atom like Fluorine , oxygen and nitrogen. for hydrogen bonding the molecule must contain highly electronegative atom. the hydrogen bonding are of the two types : intermolecular hydrogen bonding and intramolecular hydrogen bonding.
Thus, sulfur is in the same column as oxygen but H₂S molecules will not form the hydrogen bond with each other.
To learn more about sulfur here
https://brainly.com/question/8503575
#SPJ4
consider three one-liter flasks labeled a, b, and c filled with the gases cl2, clo2, and cl2o, respectively, each at 1 atm and 273 K. In which flask do the molecules have the highest average kinetic energy?
Consider three one-liter flasks labeled a, b, and c filled with the gases Cl₂, ClO₂, and Cl₂O, each at 1 atm and 273 K. flask do the molecules have the highest average kinetic energy is all the flask molecules have highest average kinetic energy.
The kinetic energy expression is given as :
K.E = 3/2 K T
so, from the expression it is clear that the kinetic energy and the temperature of the gas particles are directly proportional to each other. the relation is given as :
K.E ∝ T
the temperature for all the three flasks are same so, all the three flask the molecules have the highest average kinetic energy.
To learn more about kinetic energy here
https://brainly.com/question/10714117
#SPJ4
write the symbol for the ion of each element. classify the ion as an anion or a cation, and name the ion. a) potassium b) oxygen c) tin ( 2 electrons lost) d) bromine e) beryllium f) cobalt (3 eletctron lost )
a) The symbol of potassium is K
b) The symbol of oxygen is O
c) The symbol of tin ( 2 electrons lost) Sn²⁺ and its cation.
d) The symbol bromine is Br
e) The symbol beryllium is Be
f) The symbol cobalt (3 electrons lost ) is Co³⁺ and it's a cobaltic cation.
What is the symbol for a chemical?
Chemical elements, functional groups, and chemical compounds are represented by chemical symbols, which are acronyms used in chemistry. Elements' chemical symbols typically include one or two Latin letters, with the first letter capitalized.
As superscripts or subscripts, additional information, such as an isotope, an ionization state, or an oxidation state, can be added to the symbol in addition to the letters. Some isotopes have unique symbols instead of isotopic information added to the element symbol.
For more questions like Chemical symbols click the link below:
https://brainly.com/question/21565874
#SPJ4
enough of a monoprotic acid is dissolved in water to produce a 1.55 m solution. the ph of the resulting solution is 2.70 . calculate the ka for the acid.
The ka for the monoprotic acid is 5.37 × 10⁻⁴.
Consequently, a monoprotic acid is an acid that may donate simplest one proton, whilst polyprotic acid can donate multiple proton. in addition, a monoprotic base can most effective accept one proton, while a polyprotic base can take delivery of more than one proton.
The key difference among monoprotic and diprotic acid is that monoprotic acids are able to donate one hydrogen atom or proton to their aqueous solution, while diprotic acids are able to donate hydrogen atoms or protons to their aqueous answer.
Calculation:-
The value of dissociation constant of acid is
Ka = (0.00295)(0.00295)/0.0162)
Ka = 5.37 × 10⁻⁴
Learn more about monoprotic acid here:-
#SPJ4
what is the ph of a solution prepared by diluting 50.00 ml of 0.020 m ba(oh)2 with enough water to produce a total volume of 250.00 ml?
The pH of the solution is 11.6
given that :
molarity of Ba(OH)₂ = 0.020 M
volume = 50 mL = 0.05 L
number of moles = molarity × volume in L
= 0.020 × 0.05
= 0.001 mol
the molarity after dilution = 0.001 / 0.250
= 0.004
pOH = -log (0.004 )
= 2.39
pH + pOH = 14
pH = 14 - pOH
= 14 - 2.39
= 11.6
Thus, the pH of a solution prepared by diluting 50.00 ml of 0.020 m Ba(OH)₂ with enough water to produce a total volume of 250.00 ml is 11.6.
To learn more about pH here
https://brainly.com/question/29386398
#SPJ4
jeremiah's parents are having a lot of difficulty with their 15-year-old son. he continually argues with them and tests their rules. a psychologist tells jeremiah's parents that his urge to rebel will probably as jeremiah reaches late adolescence.
Jeremiah's parents are having a lot of difficulty with their 15-year-old son. He continually argues with them and tests their rules. A psychologist tells Jeremiah's parents that his urge to rebel will probably decrease as Jeremiah reaches late adolescence.
Adolescent psychology seeks to understand teens and assist them in transitioning from childhood to adulthood. According to the American Academy of Pediatrics, adolescence is a time of rapid development in five areas: moral, social, physical, cognitive, and emotional.
Adolescence, the years between puberty and adulthood, can be divided into three stages: early-adolescence (ages eleven to fourteen), middle-adolescence (ages fifteen to seventeen), and late-adolescence (ages eighteen to twenty-one).
Anyone who works or lives with teenagers will benefit from a course in adolescent psychology. Learn about the physical, psychological, and emotional changes that teenagers go through. Learn about the crises and challenges that adolescents face. Recognize social and moral development.
To learn more about adolescent psychology, here
https://brainly.com/question/25687647
#SPJ4
the solubility of slaked lime, ca(oh)2, in water at 20°c is 0.185 g/100.0 ml. what volume of 0.00100 m hcl is needed to neutralize 10.0 ml of a saturated ca(oh)2 solution?
if an automobile air bag has a volume of 11.3 l , what mass of nan3 (in g ) is required to fully inflate the air bag upon impact? assume stp conditions.
The mass of nan3 (in g ) is required to fully inflate the air bag upon impact. The universal gas constant (R), temperature, and the number of moles of the gas (N) are all factors in the ideal gas equation that link the pressure (P) and volume (V) that a gas occupies (T).
PV= NRT
We get many significant inferences from this:
Volume changes in direct proportion to temperature for a given pressure.
Pressure fluctuates directly with temperature for a given volume.
We are given Volume of the airbag,
v=11.2 L
Let: The mass of NaN3 required be m grams
By balancing the decomposition of NaN3, we get:2NaN3s=2Na(s)+3N2(g)
Therefore, for 3 moles N2(g), we need 2 moles NaN3.
From the above, we can get the moles of
NaN3(s) needed for 1 mole of N2(g)
: n0=23 ........................(1)
At STP, the moles of gas required to fill the airbag will be: n1=11.3=22.4⟹n1=0.5044
By using relation (1), we can determine the moles of NaN3(required to produce 0.5044 moles of N2(g) to be: n2=n1×n0
Plugging in the known values we get: n2=0.5044×23⟹2=0.3362
The molecular weight of NaN3 is M=65g. Therefore, we can calculate the mass of, NaN3 to be m=M×n2, plugging in the values, we get:
m=65×0.3362⟹m=21.853g, Hence, we need 21.853 grams of
NaN3 to fill up a 11.3-liter airbag.
To learn more about Mass of NaNc3 visit here;
brainly.com/question/12082742
#SPJ4
a-hawks
b-caterpillars
c-foxes
I'm pretty sure its b Caterpillars
use the ionic bonding model to determine which has the higher melting point, rbcl or sro . explain your answer.
RbCl has a lower charge and a higher melting point. Since the strontium and oxygen ions are bound acrystalline lattice according to the bonding concept, you would expect SrO to have a higher melting point.
What, in theory, is bonding?
Valence Covalent bond formation and the electrical structure of molecules are both covered by bond theory. The theory presupposes that inside a molecule, specific atoms' atomic orbitals are occupied by electrons, and that electrons from one atom are drawn to the nucleus of another atom.
What are the three theories of bonds?
Lewis hypothesis In this idea, the atom's surrounding electrons and lone pairs are represented by dots. Theory of valence bonds: According to this hypothesis, bonds are formed when electrons are shared among atoms' orbitals. Theory of molecular orbitals That is
To know more about bonding model visit:
https://brainly.com/question/22788745
#SPJ4
Researchers investigated the influence of environmental pH on the activity of peroxidase, an enzyme that catalyzes the conversion of hydrogen peroxide to water and oxygen gas. In an experiment, the researchers added a hydrogen peroxide solution containing guaiacol to several identical test tubes and adjusted the solution in each test tube to a different pH. The researchers included the guaiacol because it caused the solutions to change color as the reactions proceeded, which the researchers relied on for measuring reaction rates. Finally, the researchers added the same amount of peroxidase to each test tube and measured the rate of each reaction at 23°C. The results of the experiment are represented in Figure 1.
Based on Figure 1, which of the following statements best predicts the effect that a change from a moderately acidic environment (pH near 6) to a basic environment will have on peroxidase activity?
Peroxidase activity will decrease.
Peroxidase activity will decrease predicts the effect that a change from a moderately acidic environment (pH near 6) to a basic environment will have on peroxidase activity
An antioxidant enzyme class that has the ability to scavenge free radicals is glutathione peroxidase. This in turn aids in preventing lipid peroxidation and maintaining redox equilibrium as well as intracellular homeostasis [71].
The thyroid organs are the principal sites of expression for thyroid peroxidase, also known as thyroperoxidase (TPO). It is a sizable transmembrane glycoprotein that is found on the apical membrane of cells and has covalently attached hemoglobin (Gardas et al., 1999). Coffee's pH ranges from 4.85 to 5.10, which is considered acidic, as the brewing process releases acidic from the coffee beans.
Learn more about peroxidase here:
https://brainly.com/question/14870911
#SPJ4
. suppose 45.1 g of sulfuric acid is mixed with 47. g of sodium hydroxide. calculate the minimum mass of sulfuric acid that could be left over by the chemical reaction. round your answer to 2
the minimum mass of sulfuric acid that could be left over by the chemical reaction is 0.4608 mol.
How to calculate ?H2SO4(aq) + 2NaOH(s) ==> Na2SO4(aq) + 2H2O(l) ... balanced equation
Find the reactant that is the limit. Determine which is less by dividing the moles of each reactant by the corresponding coefficient in the balanced equation.
For H2SO4: 45.1 g H2SO4 x 1 mol H2SO4/98 g = 0.4602 mols (÷1>0.4602)
For NaOH: 47. g NaOH x 1 mol NaOH / 40. g = 1.175 mols (÷2->1.175)
Since 0.4602 is less than 1.175, H2SO4 is our limiting reactant, and the greatest amount of product that may be created will depend on the moles of H2SO4.
If the reaction is allowed to finish, there can be no more H2SO4 than a minimum mass of 0 grams. There shouldn't be any NaOH left over because it will run out before it is completely consumed.
That's a different matter if you meant to inquire about the smallest mass of NaOH that might possibly remain. In that scenario, you'll need to submit the problem again.
learn more about moles visit :
https://brainly.com/question/26416088
#SPJ4
how many grams of sodium cholide are thee in 55.0 ml of a 1.90 m aqueous solution of sodium chioride
The aqueous solution of sodium chloride is 56.9g
Reason:
Given:
Molarity = 1.9M,
Volume = 55 mL,
Molar Mass NaCl = 58.44 = [ 22.99 + 35.45 ], 1.9M means 1.9 moles in 1000 mL
55mL -> (1.9)(55/1000) = 0.1045
Mass in g = (58.44)(0.1045) = 6.10698
Learn more about Sodium Chloride:
https://brainly.com/question/6649122
#SPJ4
How many atoms of hydrogen ( h ) are present in 200 molecules of ammonia ( nh3 )?.
First, lets examine the formula for that of Ammonia.
Ammonia = NH3
Notice that in the formula, there are 3 hydrogen atoms in a single ammonia molecule. This being said, if there are 200 molecules of ammonia in the given scenario, multiply 200 by 3.
[tex]200[/tex] × [tex]3 = 600[/tex] ← Amount of (H) Atoms Present in 200 (NH3) Molecules
Hope this helps!
Base-catalyzed biodiesel production utilizes __________________: transformation of an ester into another ester through interchange of the alkoxy group.
Base-catalyzed biodiesel production utilizes transesterification : transformation of an ester into another ester through interchange of the alkoxy group.
What is a transesterification ?
Transesterification is defined as the chemical process of converting triglycerides with alcohol into alkyl esters using a catalyst [64]. Because of their low cost and ease of availability, methanol and ethanol are commonly used alcohols in this process.Strong acids catalyse the reaction by donating a proton to the carbonyl group, resulting in a more potent electrophile, whereas bases catalyse the reaction by removing a proton from the alcohol, resulting in a more nucleophilic product. The carbonyl carbon of the starting ester reacts to form a tetrahedral intermediate, which either reverts to the starting material or proceeds to the transesterified product in the transesterification mechanism (RCOOR2). The various species are in equilibrium, and the distribution of the product is determined by the relative energies of the reactant and product. Depending on the reaction conditions, ester hydrolysis and/or esterification will also occur, resulting in the presence of some free carboxylic acid.To learn more about transesterification refer :
https://brainly.com/question/14788177
#SPJ4
if a thermodynamic equilibrium constant is only a function of temperature, why does it apparently change with solvent?
If a thermodynamic equilibrium constant is only a function of temperature, it apparently change with solvent because the nature of the solvent will affect the equilibrium constant.
The equilibrium constant of the reaction is the value of the ratio between the concentration of the reactant and the concentration of the product.
let us take an example :
aA + bB ⇄ cC + dD
equilibrium constant , K = [ C ]^c [D]^d / [A]^a [B]^b
The only thing ,equilibrium constant affect by is the temperature. the different solvent also affect the equilibrium constant because of the differential stabilization of the reactant and the product form.
To learn more about equilibrium constant here
https://brainly.com/question/10038290
#SPJ4
a reaction vessel contains5.50 g of co and 5.50g of o2. how many grams of co2 could be produced according to the following unbalanced reaction?
Grams of CO2 produced = 8.63 g
From the question, we have
5.50g of oxygen and 5.50g of co are present in the reaction vessel.
Moles of CO = 5.50 * 1/28.01
=0.196 moles
Moles of O2 = 5.50*1/15.99
= 0.344 moles
Moles of O2 required = 0.344/2 = 0.172 moles
Grams of CO2 produced = 0.196*44.01
=8.63 g
Equal numbers of atoms from various elements are present in both the reactants and the products in balanced chemical equations. Varied elements' atom counts in the reactants and products of unbalanced chemical equations are different. Unbalanced chemical equations are those that have an uneven number of atoms of one or more elements in the reactants and products.
To learn more about unbalanced reaction visit: https://brainly.com/question/28169970
#SPJ4
would you expect the tert-butyl bromide or the tert-butanol to have a higher boiling point? describe the intermolecular forces present in each to justify your answer (5 pts).
Tert-butanol has a -OH group so it will undergo hydrogen bonding and it will show the highest boiling point, while tert- butyl bromide has no hydrogen bonding.
What is the Boiling point?When a liquid's vapour pressure equals that of the gas above it, that liquid has reached its boiling point. When a liquid's vapour pressure reaches one atmosphere, it is said to have reached its usual boiling point (760 torrs).
What is Hydrogen bonding?Two atoms that are already involved in other chemical connections are attracted to one another in a hydrogen bond. Hydrogen is one of the atoms, while the other can be any electronegative element, such as oxygen, chlorine, or fluorine. Atoms within a molecule or molecules can form hydrogen bonds with one another.
Hence, tert-butanol has a -OH group so it will undergo hydrogen bonding and it will show the highest boiling point, while tert- butyl bromide has no hydrogen bonding.
To know more about Hydrogen bonding, check out:
https://brainly.com/question/1426421
#SPJ4
Write the complete electron configuration of the nitrogen atom.
Answer: [He] 2s2 2p3
Why is shampoo not harmful to hair but soap is? select all statements that apply.
It is acidic shampoo. Not basic, but in between acidic and neutral. Because basic shampoo would be harmful in this situation. The basic ph of soap is incorrect.
Shampoo or hair soap, which is worse for hair?Once or twice will not harm your hair when you wash it with soap, but frequent washings with bar soap can lead to serious issues including roughness and severe tangles. Choose a shampoo instead to clean your hair. Dry shampoo is an excellent option for your hair if you wish to forgo shampoo.
Does soap damage hair?You can wash your hair with soap, but if you're used to using liquid shampoo, the results will probably not be satisfactory.
Learn more about shampoo here:
brainly.com/question/11192467
#SPJ4
where would 14c have to be in the starting glucose to ensure that the fermentation process releases all of the 14c label as 14co2?
The methyl group of pyruvate is where C1 labels when it is added to glucose. A hexose is split into two trioses by aldolase.
What exactly happens during fermentation?
Carbohydrates are broken down by the enzymes of microorganisms during fermentation in the absence of oxygen. Microorganisms like bacteria and fungi are able to produce enzymes that can break down different kinds of sugar molecules because they have unique sets of metabolic genes.
Short answer: What is the fermentation process?
A substance decomposes into a simpler substance through the process of fermentation. In the absence of oxygen or any electron transport, the metabolic process known as fermentation transforms organic molecules (mostly carbohydrates like starch or sugar) into acids, gases, or alcohol.
To know more about fermentation process visit:
https://brainly.com/question/28813836
#SPJ4
One mL of water i poured onto one hand and one mL of acetone i poured onto the other hand. A they evaporate, they both feel cool. Which one feel cooler and why?
Energy is required for evaporation, and so this extra heat is expended from the body. they both feel chilly as they dissipate.
Describe evaporation and provide instances.
In the water cycle, evaporation happens when water from any body of water on the earth's surface evaporates into the atmosphere. Rain is produced when this water cools. Evaporation is what creates the steam inside a warm cup of coffee or tea.
What is the evaporation process?
The process of evaporation turns liquid water into gas water (water vapor). Evaporation is how water gets from the surface of the Earth to the atmosphere. Heat energy causes the bonds holding the water together to fall apart, which causes evaporation.
To know more about evaporation visit:
https://brainly.com/question/5019199
#SPJ4
after studying how many different elements absorb x-rays, harry finds that the atomic number of the element is always proportional to the square root of the wavelength of x-rays absorbed by the element, an example of the kind of that in the late th and early th centuries hinted at the structure of the atom.
After studying many different elements absorb x-rays, harry finds that the atomic number of the element is always proportional to the square root of the wavelength of x-rays absorbed by the element, an example of the kind of law that in the late 19th and early 20th centuries hinted at the structure of the atom.
What does "wavelength" mean in chemistry?The distance in between given position and the identical point in the following wave cycle is known as the wavelength () in waves.
In chemistry, what do wavelength and frequency mean?The distance between two wave crests, which also applies to troughs, is known as the wavelength. The frequency is determined in cycles each second (Hz), which is the quantity of vibrations that cross a specific area in a second (Hertz). In this article, the relationship between frequency and the wavelength is covered.
To know more about wavelength visit :
https://brainly.com/question/13533093
#SPJ4
I understand the question you are looking for is :
After studying how many different elements absorb X-rays, Harry finds that the atomic number of the element is always proportional to the square root of the wavelength of X-rays absorbed by the element, an example of the kind of _____________ that in the late 19th and early 20th centuries hinted at the structure of the atom.