. The client was hoping for a likability score of at least 5.2. Use your sample mean and standard deviation identified in the answer to question 1 to complete the following table for the margins of error and confidence intervals at different confidence levels. Note: No further calculations are needed for the sample mean. (6 points: 2 points for each completed row) Confidence Level | Margin of error | Center interval | upper interval | Lower interval 68 95 99.7
Answers
Answer:
The 68% confidence interval is (6.3, 6.7).
The 95% confidence interval is (6.1, 6.9).
The 99.7% confidence interval is (5.9, 7.1).
Step-by-step explanation:
The Central Limit Theorem states that if we have a population with mean μ and standard deviation σ and take appropriately huge random-samples (n ≥ 30) from the population with replacement, then the distribution of the sample-means will be approximately normally distributed.
Then, the mean of the sample means is given by,
[tex]\mu_{\bar x}=\bar x[/tex]
And the standard deviation of the sample means (also known as the standard error)is given by,
[tex]\sigma_{\bar x}=\frac{\sigma}{\sqrt{n}} \ \text{or}\ \frac{s}{\sqrt{n}}[/tex]
The information provided is:
[tex]n=400\\\\\bar x=6.5\\\\s=4[/tex]
As n = 400 > 30, the sampling distribution of the sample-means will be approximately normally distributed.
(a)
Compute the 68% confidence interval for population mean as follows:
[tex]CI=\bar x\pm z_{\alpha/2}\cdot \frac{s}{\sqrt{n}}[/tex]
[tex]=6.5\pm 0.9945\cdot \frac{4}{\sqrt{400}}\\\\=6.5\pm 0.1989\\\\=(6.3011, 6.6989)\\\\\approx (6.3, 6.7)[/tex]
The 68% confidence interval is (6.3, 6.7).
The margin of error is:
[tex]MOE=\frac{UL-LL}{2}=\frac{6.7-6.3}{2}=0.20[/tex]
(b)
Compute the 95% confidence interval for population mean as follows:
[tex]CI=\bar x\pm z_{\alpha/2}\cdot \frac{s}{\sqrt{n}}[/tex]
[tex]=6.5\pm 1.96\cdot \frac{4}{\sqrt{400}}\\\\=6.5\pm 0.392\\\\=(6.108, 6.892)\\\\\approx (6.1, 6.9)[/tex]
The 95% confidence interval is (6.1, 6.9).
The margin of error is:
[tex]MOE=\frac{UL-LL}{2}=\frac{6.9-6.1}{2}=0.40[/tex]
(c)
Compute the 99.7% confidence interval for population mean as follows:
[tex]CI=\bar x\pm z_{\alpha/2}\cdot \frac{s}{\sqrt{n}}[/tex]
[tex]=6.5\pm 0.594\cdot \frac{4}{\sqrt{400}}\\\\=6.5\pm 0.392\\\\=(5.906, 7.094)\\\\\approx (5.9, 7.1)[/tex]
The 99.7% confidence interval is (5.9, 7.1).
The margin of error is:
[tex]MOE=\frac{UL-LL}{2}=\frac{7.1-5.9}{2}=0.55[/tex]
Related Questions
2) Find the diameter.
4) If the diameter is equal to 3 inches ,d=
Answers
Answer:
d = 3 in
Step-by-step explanation:
Since we are trying to find the diameter, and the diameter is given to us as 3 in, our diameter is 3 in.
In the DBE 122 class, there are 350 possible points. These points come from 5 homework sets that are worth 10 points each and 3 exams that are worth 100 points each. A student has received homework scores of 7, 8, 7, 5, and 8 and the first two exam scores are 81 and 80. Assuming that grades are assigned according to the standard scale, where if the grade percentage is 0.9 or higher the student will get an A, and if the grade percentage is between 0.8 and 0.9 the student will get a B, and there are no weights assigned to any of the grades, is it possible for the student to receive an A in the class? What is the minimum score on the third exam that will give an A? What about a B?
Answers
Answer:
a) The student cannot receive an A in the class.
b) The student must score 119 in the third exams to make an A. This is clearly not possible, since he cannot make 119 in a 100-points exam.
c) The student can make a B but he must score at least 84 in the third exam.
Step-by-step explanation:
To make an A, the student must score 315 (350 x 90%) in both home and the three exams.
The student who scored 35 (7 + 8 + 7 + 5 + 8) in the homework and 161 (81 + 80), getting a total of 196, is short by 119 (315 - 196) scores in making an A.
To make a B, the student must score 280 (350 x 80%) or higher but not reaching 315.
B ≥ 280 and < 315.
Since, the student had scored 196, he needs to score 84 and above to make a B in the last exam.
Arrange the functions for which the result is a non-infinite value and the limit exists in ascending order of their limit values as x tends to infinity. Please see picture attached.
Answers
Answer:
see attached
Step-by-step explanation:
The limit as x gets large is the ratio of the highest-degree terms. In most cases, the limit can be found by evaluating that ratio. Where an absolute value is involved, the absolute value of the highest-degree term is used.
If the ratio gives x to a positive power, the limit does not exist. If the ratio gives x to a negative power, the limit is zero.
The arrangement of functions according to the given condition
[tex]m(x)=\frac{4x^{2}-6 }{1-4x^{2} }[/tex]
[tex]h(x)=\frac{x^{3} -x^{2} +4}{1-3x^{2} }[/tex]
[tex]k(x)=\frac{5x+1000}{x^{2} }[/tex]
[tex]i(x)=\frac{x-1}{|1-4x| }[/tex]
[tex]g(x)=\frac{|4x-1|}{x-4}[/tex]
[tex]l(x)=\frac{5x^{2} -4}{x^{2} +1}[/tex]
[tex]f(x)=\frac{x^{2} -1000}{x-5}[/tex]
[tex]j(x)=\frac{x^{2}-1 }{|7x-1|}[/tex]
What is limit?A limit is the value that a function approaches as the input approaches some value.
According to the given question
[tex]l(x)=\frac{5x^{2} -4}{x^{2} +1}[/tex]
⇒[tex]\lim_{nx\to \infty} \frac{5x^{2} -1}{x^{2} +1}[/tex]
⇒[tex]\lim_{x \to \infty} \frac{x^{2} }{x^{2} } \frac{5-\frac{1}{x^{2} } }{1+\frac{1}{x^{2} } }[/tex]
= 5 ([tex]\frac{1}{x^{2} } = 0[/tex] ,as x tends to infinity [tex]\frac{1}{x^{2} }[/tex] tends to 0)
[tex]i(x)=\frac{x-1}{|1-4x|}[/tex]
⇒[tex]\lim_{x \to \infty} \frac{x-1}{|1-4x|}[/tex] = [tex]\lim_{x \to \infty} \frac{x}{x} \frac{1-\frac{1}{x} }{|\frac{-1}{4}+\frac{1}{x} | }[/tex] =[tex]\frac{1}{\frac{1}{4} }[/tex] =[tex]\frac{1}{4}[/tex]
As x tends to infinity 1/x tends to 0, and |[tex]\frac{-1}{4}[/tex]| gives 1/4
[tex]f(x)= \frac{x^{2} -1000}{x--5}[/tex]
⇒[tex]\lim_{x \to \infty} \frac{x^{2} -1000}{x-5}[/tex]= [tex]\lim_{x \to \infty} \frac{x^{2} }{x} \frac{1-\frac{1000}{x^{2} } }{1-\frac{5}{x} }[/tex]= [tex]\lim_{x \to \infty} x\frac{1-\frac{1000}{x^{2} } }{1-\frac{5}{x} }[/tex] ⇒ limit doesn't exist.
[tex]m(x)=\frac{4x^{2}-6 }{1-4x^{2} }[/tex]
⇒[tex]\lim_{x\to \infty} \frac{4x^{2} -6}{1-4x^{2} }[/tex]=[tex]\lim_{x\to \infty} \frac{x^{2} }{x^{2} } \frac{4-\frac{6}{x^{2} } }{\frac{1}{x^{2} } -4}[/tex] [tex]= \lim_{n \to \infty} \frac{4}{-4}[/tex] = -1
As x tends to infinity [tex]\frac{1}{x^{2} }[/tex] tends to 0.
[tex]g(x)=\frac{|4x-1|}{x-4}[/tex]
⇒[tex]\lim_{x\to \infty} \frac{|4x-1|}{x-4}[/tex] = [tex]\lim_{x \to \infty} \frac{|x|}{x} \frac{4-\frac{1}{x} }{1 -\frac{4}{x} } }[/tex] = 4
as x tends to infinity 1/x tends to 0
and |x|=x ⇒[tex]\frac{|x|}{x}=1[/tex]
[tex]h(x)=\frac{x^{3}-x^{2} +4 }{1-3x^{3} }[/tex][tex]\lim_{x \to \infty} \frac{x^{3} -x^{2} +4}{1-3x^{3} }[/tex][tex]= \lim_{x \to \infty} \frac{x^{3} }{x^{3} } \frac{1-\frac{1}{x}+\frac{4}{x^{3} } }{\frac{1}{x^{3} -3} }[/tex] = [tex]\frac{1}{-3}[/tex] =[tex]-\frac{1}{3}[/tex]
[tex]k(x)=\frac{5x+1000}{x^{2} }[/tex]
[tex]\lim_{x \to \infty} \frac{5x+1000}{x^{2} }[/tex] = [tex]\lim_{x \to \infty} \frac{x}{x} \frac{5+\frac{1000}{x} }{x}[/tex] =0
As x tends to infinity 1/x tends to 0
[tex]j(x)= \frac{x^{2}-1 }{|7x-1|}[/tex]
[tex]\lim_{x \to \infty} \frac{x^{2}-1 }{|7x-1|}[/tex] = [tex]\lim_{x \to \infty} \frac{x}{|x|}\frac{x-\frac{1}{x} }{|7-\frac{1}{x}| }[/tex] = [tex]\lim_{x \to \infty} 7x[/tex] = limit doesn't exist.
Learn more about limit here:
https://brainly.in/question/5768142
#SPJ2
is this right one more i think lol
Answers
Answer:
Yup P is the right one having 62.26%
Step-by-step explanation:
Answer:
Yes
Step-by-step explanation:
We can set it up as
P = 33/53
Q = 20/48
R = 54/90
S = 44/83
This is because we are calculating the percent of yellow birds in the total amt. of birds in a specified park.
Now we calculate =>
P = 33/53 = around 0.62
Q = 20/48 = around 0.416
R = 54/90 = 0.6
S = 44/83 = around 0.53
We find that Park P has the greatest percentage and -->
Thus, Park P is our answer and yes, you are correct.
Solve this correctly for brainliest !!!!!! 3(7) + 2 • |7 - 8| - 12
Answers
Answer:
3(7) + 2* |7 - 8| - 12 = 11
Step-by-step explanation:
3(7) + 2* |7 - 8| - 12
21 + 2* |-1| - 12
21 + 2* 1 - 12
21 + 2 - 12
23 - 12 = 11
Hope this helps! :)
Factor completely 5x(x + 3) + 6(x + 3). (1 point)
Answers
Answer:
The answer is ( 5x + 6 ) ( x + 3 )Step-by-step explanation:
5x(x + 3) + 6(x + 3)
The final answer is
( 5x + 6 ) ( x + 3 )
Hope this helps you
An article gave the accompanying data on ultimate load (kN) for two different types of beams. Assuming the underlying distributions are Normal, calculate and interpret a 99% Cl for the difference between the true average load for the fiberglass beams and that for the carbon beams.
Type Sample size Sample Mean Sample SD
Fiberglass grid 26 33.4 2.2
Commercial carbon 26 42.8 4.3
grid
1. Calculate and interpret a 99% Cl for true average stance duration among elderly individuals.
2. Carry out a test of hypotheses at significance level 0.05 to decide whether true average stance duration is larger among elderly individuals than younger individuals.
Answers
Answer:
The 99% confidence interval for the difference between the true average load for the fiberglass beams and that for the carbon beams is (-11.937, -6.863).
Step-by-step explanation:
We have to calculate a 99% confidence interval for the difference between the true average load for the fiberglass beams and that for the carbon beams.
The sample 1 (Fiberglass), of size n1=26 has a mean of 33.4 and a standard deviation of 2.2.
The sample 2 (Carbon), of size n2=26 has a mean of 42.8 and a standard deviation of 4.3.
The difference between sample means is Md=-9.4.
[tex]M_d=M_1-M_2=33.4-42.8=-9.4[/tex]
The estimated standard error of the difference between means is computed using the formula:
[tex]s_{M_d}=\sqrt{\dfrac{\sigma_1^2}{n_1}+\dfrac{\sigma_2^2}{n_2}}=\sqrt{\dfrac{2.2^2}{26}+\dfrac{4.3^2}{26}}\\\\\\s_{M_d}=\sqrt{0.186+0.711}=\sqrt{0.897}=0.9473[/tex]
The critical t-value for a 99% confidence interval is t=2.678.
The margin of error (MOE) can be calculated as:
[tex]MOE=t\cdot s_{M_d}=2.678 \cdot 0.9473=2.537[/tex]
Then, the lower and upper bounds of the confidence interval are:
[tex]LL=M_d-t \cdot s_{M_d} = -9.4-2.537=-11.937\\\\UL=M_d+t \cdot s_{M_d} = -9.4+2.537=-6.863[/tex]
The 99% confidence interval for the difference between the true average load for the fiberglass beams and that for the carbon beams is (-11.937, -6.863).
In this way, we can calculate the individual duration of each one and the duration time, knowing that the sample means:
The 99% confidence interval for the difference between the true average load for the fiberglass beams and that for the carbon beams is -11.937 and -6.863.
We have to calculate a 99% confidence interval for the difference between the true average load for the fiberglass beams and that for the carbon beams. The sample 1 (Fiberglass), of size n1=26 has a mean of 33.4 and a standard deviation of 2.2. The sample 2 (Carbon), of size n2=26 has a mean of 42.8 and a standard deviation of 4.3. The difference between sample means is Md=-9.4.
[tex]Sm_d= \sqrt{\frac{\sigma^2_1}{n_1} +\frac{\sigma^2_2}{n_2}} = \sqrt{(0.186)+(0.711) }= 0.9473[/tex]
The critical t-value for a 99% confidednce interval is t=2.678. The margin of error (MOE) can be calculated as:
[tex]MOE=t*8M_d = (2.678)(0.9473)= 2.537[/tex]
Then, the lower and upper bounds of the confidence interval are:
[tex]LL= M_d-t*SM_d = -9.4-2.537= -11.937\\UL= M_d+t*SM_d= -9.4+2.537= -6.863[/tex]
The 99% confidence interval for the difference between the true average load for the fiberglass beams and that for the carbon beams is (-11.937, -6.863).
See more about statistics at brainly.com/question/2289255
Hi, can someone help me on this. I'm stuck --
Answers
Answer:
a) Fx=-5N Fy=-5*sqrt(3) N b) Fx= 5*sqrt(3) N Fy=-5N
c) Fx=-5*sqrt(2) N Fy=-5*sqrt(2) N
Step-by-step explanation:
The arrow's F ( weight) component on axle x is Fx= F*sinA and on axle y is
Fy=F*cosA
a) The x component and y component both are opposite directed to axle x and axle y accordingly. So both components are negative.
So Fx = - 10*sin(30)= -5 N Fy= -10*cos(30)= -10*sqrt(3)/2= -5*sqrt (3) N
b) Now the x component is co directed to axle x , and y component is opposite directed to axle y.
So x component is positive and y components is negative
So Fx = 10*sin(60)= 5*sqrt(3) N Fy= -10*cos(60)= -10*1/2= -5 N
c)The x component and y component both are opposite directed to axle x and axle y accordingly. So both components are negative.
So Fx = - 10*sin(45)= -5*sqrt(2) N
Fy= -10*cos(45)= -10*sqrt(2)/2= -5*sqrt (2) N
0.3y+ z y 0, point, 3, y, plus, start fraction, y, divided by, z, end fraction when y=10y=10y, equals, 10 and z=5z=5z, equals, 5.
Answers
Answer:
5
Step-by-step explanation:
Substitute the given values and do the arithmetic.
[tex]0.3y+\dfrac{y}{z}=0.3\cdot 10+\dfrac{10}{5}=3+2=\boxed{5}[/tex]
Toby cuts a pizza into 6 equal slices. He eats half a slice. What fraction of the pizza has he eaten?
Answers
The pizza is cut into 6 slices so each slice would be 1/6 of the pizza.
He at 1/2 of a slice:
1/6 x 1/2 = 1/12 of the pizza
Slices are 1/6th of the pizza
Of indicates multiplication
So
1/6 x 1/2 = 1/12
plz give me correct answers
Answers
Answer:
Step-by-step explanation:
greatest number=8643
smallest number=3468
difference=8643-3468=5175
6.1. DCCLVI
CDXCIV
(II) 74,746
Which number is greatest? 6.23 times 10 Superscript 12 6.23 times 10 Superscript 8 6.23 times 10 Superscript negative 6 6.23 times 10 Superscript 3
Answers
It shows the 10 has been multiplied by itself thrice
Please mark as brainliest
The greatest number is 6.23 times 10 superscript 12.
How does scientific notations work?The number is written in the form [tex]a \times 10^b[/tex] where we have [tex]1 \leq a < 10[/tex]
The number b shows the order, which is the most important figure for which scientific notation is used. It tells us how much order large or small a value is in powers of 10. We can for a time, ignore the value of 'a' for two comparable quantities and only compare their orders(this type of comparison is useful when difference is too big, like size of human to size of a star etc sort of comparisons).
We are given that the number so;
A.6.23 x 10^12 is equivalent to rolling the decimal 12 times to the right.
B.6.23 x 10^8 is equivalent to rolling the decimal 8 times to the right.
C.6.23 x 10^-6 is equivalent to rolling the decimal 6 times to the left.
D.6.23 x 10^3 is equivalent to rolling the decimal 3 times to the right.
This shows the 10 has been multiplied by itself thrice.
Learn more about scientific notation here:
https://brainly.com/question/3112062
#SPJ6
PLS HELP ASAP!!!!........
Answers
Answer:
aaaaha pues
Step-by-step explanation:
Answer:
what happened
Step-by-step explanation:
Give the three-letter name of each of the angles in the drawing below. Lines and Angles a. ∠1 b. ∠2 c. ∠3 d. ∠4
Answers
Answer:
a. AEB
b. BEC
c. CED
d. AED
Step-by-step explanation:
Each angle is made up of three points. All three points in order is the name of the angle.
Answer:
a. ∠1 = ∠AEB or ∠BEA
b. ∠2 = ∠BEC or ∠CEB
c. ∠3 = ∠CED or ∠DEC
d. ∠4 = ∠DEA or ∠AED
Step-by-step explanation: Penn <3
Which steps would be used to solve the equation? Check all that apply. 2 and two-thirds + r = 8 Subtract 2 and two-thirds from both sides of the equation. Add 2 and two-thirds to both sides of the equation. 8 minus 2 and two-thirds = 5 and one-third 8 + 2 and two-thirds = 10 and two-thirds Substitute the value for r to check the solution.
Answers
Answer:
Subtract 2 and two-thirds from both sides of the equation
8 minus 2 and two-thirds = 5 and one-third
Substitute the value for r to check the solution.
Step-by-step explanation:
2 2/3 + r = 8
Subtract 2 2/3 from each side
2 2/3 + r - 2 2/3 = 8 - 2 2/3
r = 5 1/3
Check the solution
2 2/3 +5 1/3 =8
8 =8
Answer:
1, 3, 5
Step-by-step explanation:
edge
Below are the times (in days) it takes for a sample of 17 customers from Andrew's computer store to pay their invoices.
19.15, 43, 39, 35, 31, 27, 34, 34, 30, 30, 26, 26, 26, 21, 21, 17
Draw the histogram for these data using an initial class boundary of 14.5, an ending class boundary of 49.5, and 5 classes of equal width. Note that you can add
or remove classes from the figure. Label each class with its endpoints.
Frequency
I:lo 11:0
圖 8 回回回回
Х
?
0
0
Time (in days)
Check
Save For Later
Submit Assignment
Answers
Answer:
Step-by-step explanation:
Hello!
The variable of interest is X: time it takes a customer from Andrew's computer store to pay his invoices.
You have the information of a sample of n= 17 customers
19, 15, 43, 39, 35, 31, 27, 34, 34, 30, 30, 26, 26, 26, 21, 21, 17
To determine the class width of the intervals for the divide the difference between the ending and initial class boundaries by the number of intervals that you want to determine:
Class width: (49.5-14.5)/5= 7
Then, starting from the initial class boundary, you have to add the class width to determine the next boundary, and so on until the ending class boundary:
Initial class boundary: 14.5
14.5 + 5.6= 20.1
1st interval: [14.5; 21.5]
and so on:
[21.5; 28.5]
[28.5; 35.5]
[35.5; 42.5]
[42.5; 49.5]
Once you determined all class intervals, you have to order the values of the data set from least to greatest and then count how many observations correspond to each interval and arrange it in a frequency table.
15, 17, 19, 21, 21, 26, 26, 26, 27, 30, 30, 31, 34, 34, 35, 39, 43
[14.5; 21.5] ⇒ 5
[21.5; 28.5] ⇒ 4
[28.5; 35.5] ⇒ 6
[35.5; 42.5] ⇒ 1
[42.5; 49.5] ⇒ 1
Once you have the data set organized in the table, you can proceed to draw the histogram.
(See attachment)
I hope this helps!
For the binomial distribution with the given values for n and p, state whether or not it is suitable to use the normal distribution as an approximation. n = 24 and p = 0.6.
Answers
Answer:
Since both np > 5 and np(1-p)>5, it is suitable to use the normal distribution as an approximation.
Step-by-step explanation:
When the normal approximation is suitable?
If np > 5 and np(1-p)>5
In this question:
[tex]n = 24, p = 0.6[/tex]
So
[tex]np = 24*0.6 = 14.4[/tex]
And
[tex]np(1-p) = 24*0.6*0.4 = 5.76[/tex]
Since both np > 5 and np(1-p)>5, it is suitable to use the normal distribution as an approximation.
A very large batch of components has arrived at a distributor. The batch can be characterized as acceptable only if the proportion of defective components is at most .10. The distributor decides to randomly select 10 components and to accept the batch only if the number of defective components in the sample is at most 2. Let X denote the number of defective components in the sample. What is the distribution of X? Justify your answer.
Required:
What is the probability that the batch will be accepted when the actual proportion of defectives (p) is:_______
a, 0.01
b. 0.05
c. 0.10
d. 0.20
e. 0.25
Answers
Answer:
c. 0.10
Step-by-step explanation:
Hello!
To accept a batch of components, the proportion of defective components is at most 0.10.
X: Number of defective components in a sample of 10.
This variable has a binomial distribution with parameters n=10 and p= 0.10 (for this binomial experiment, the "success" is finding a defective component)
The distributor will accept the batch if at most two components are defective, symbolically:
P(X≤2)
Using the tables for the binomial distribution you can find the accumulated probability for a sample of n=10 with probability of success of p= 0.10 and number of successes x= 2
P(X≤2)= 0.9298
I hope this helps!
Simplify the algebraic expression: 7x2 + 6x – 9x – 6x2 + 15. A) x2 + 15x + 15 B) x2 – 3x + 15 C) 13x2 + 3x + 15 D) x4 – 3x + 15
Answers
Answer:
B) [tex]x^2-3x+15[/tex]
Step-by-step explanation:
[tex]7x^2+6x-9x-6x^2+15=\\7x^2-6x^2+6x-9x+15=\\x^2+6x-9x+15=\\x^2-3x+15[/tex]
A) [tex]x^2+15x+15[/tex]
B) [tex]x^2-3x+15[/tex]
C) [tex]13x^2 + 3x + 15[/tex]
D) [tex]x^4-3x + 15[/tex]
━━━━━━━☆☆━━━━━━━
▹ Answer
B. x² - 3x + 15
▹ Step-by-Step Explanation
7x² + 6x - 9x - 6x² + 15
Collect like terms
x² + 6x - 9x + 15
Subtract
x² - 3x + 15
Final Answer
x² - 3x + 15
Hope this helps!
- CloutAnswers ❁
Brainliest is greatly appreciated!
━━━━━━━☆☆━━━━━━━
Write a pair of integers whose sum is- -8
Answers
Answer:
-3+(-5)
Checking our answer:
Adding this does indeed give -8
If the area of a circular cookie is 28.26 square inches, what is the APPROXIMATE circumference of the cookie? Use 3.14 for π.
75.2 in.
56.4 in.
37.6 in.
18.8 in.
Answers
Answer:
Step-by-step explanation:
c= 2(pi)r
Area = (pi)r^2
28.26 = (pi) r^2
r =[tex]\sqrt{9}[/tex] = 3
circumference = 2 (3.14) (3)
= 18.8 in
Answer: approx 18.8 in
Step-by-step explanation:
The area of the circle is
S=π*R² (1) and the circumference of the circle is C= 2*π*R (2)
So using (1) R²=S/π=28.26/3.14=9
=> R= sqrt(9)
R=3 in
So using (2) calculate C=2*3.14*3=18.84 in or approx 18.8 in
A square has a perimeter of 12x+52 units. Which expression represents the side leagth of the square in units
Answers
Answer:
12x/2 or 52/2
Step-by-step explanation:
Ok, perimeter is length+length+width+width. 12x/2 and 52/2 could are probably the answers.
Using the following conversions between the metric and U.S. systems, convert the measurement. Round your answer to 6 decimal places as needed
1 meter ≈ 3.28 feet
1 Liter ≈ 0.26 gallons
1 kilogram ≈ 2.20 pounds
33.777 yd ≈ __________ km
Answers
Answer:
33.777 yd = 0.030886 km
Step-by-step explanation:
==>Given:
33.777 yd
==>Required:
Convert 33.777 yd to km to 6 decimal places, using the metric and U.S systems.
==>Solution:
To convert, note that 1 km = 1093.6133 yd.
Thus,
1 km = 1093.6133 yd
x km = 33.777 yd
Cross multiply
1 × 33.777 = 1093.6133 × x
33.777 = 1093.6133x
Divide both sides by 1093.6133, to solve for x
33.777/1093.6133 = x
0.03088569 = x
x ≈ 0.030886 (to 6 decimal places)
Therefore, 33.777 yd = 0.030886 km
Help please! Simplify 7/ √x
Answers
Answer:
[tex]\frac{7\sqrt{x} }{x}[/tex]
Step-by-step explanation:
To simplify 7/√x, we need to rationalize:
[tex]\frac{7}{\sqrt{x} } (\frac{\sqrt{x} }{\sqrt{x} } )[/tex]
When we multiply the 2, we should get our answer:
[tex]\frac{7\sqrt{x} }{x}[/tex]
Answer:
[tex]\frac{7\sqrt{x} }{x}[/tex]
Step-by-step explanation:
[tex]\frac{7}{\sqrt{x} } \\\\\frac{7}{\sqrt{x} } * \frac{\sqrt{x} }{\sqrt{x} } \\\\\frac{7\sqrt{x} }{\sqrt{x\sqrt{x} } } \\[/tex]
[tex]\frac{7\sqrt{x} }{x}[/tex]
Hope this helps! :)
Find AC. (Khan Academy-Math)
Answers
Answer:
[tex]\boxed{11.78}[/tex]
Step-by-step explanation:
From observations, we can note that BC is the hypotenuse.
As the length of hypotenuse is not given, we can only use tangent as our trig function.
tan(θ) = opposite/adjacent
tan(67) = x/5
5 tan(67) = x
11.77926182 = x
x ≈ 11.78
On a piece of paper, graph y + 2 ≤ -2/3x +4. Then determine which answer choice matches the graph you drew.
Answers
Answer:
B
Step-by-step explanation:
You only need to look at the comparison symbol (≤) to determine the correct graph. It tells you the shading is below the boundary line, and the boundary line is included in the solution region (a solid line).
The shading is below the line because y-values are less than (or equal to) values on the line.
Choice B matches the attached graph.
Answer:
it is graph b
Step-by-step explanation:
what is 3 + 3 × 3 + 3 =
Answers
Answer:
15
Step-by-step explanation:
PEMDAS
3x3 = 9
3+3 = 6
9+6 = 15
By the BODMAS rule we get, 3 + 3 × 3 + 3 = 15
The acronym BODMAS rule is used to keep track of the right sequence of operations to do when solving mathematical issues. Brackets (B), order of powers or roots (O), division (D), multiplication (M), addition (A), and subtraction (S) are all represented by this acronym (S).
3 + 3 × 3 + 3 =
3 × 3 = 9
3 + 9 + 3 = 15.
Therefore, the correct answer is 15.
Learn more about BODMAS rule here:
https://brainly.com/question/16738857
#SPJ4
find the value of x that makes abcd a parallelogram
Answers
The 4 angles need to add to 360.
2 of them are 70
The other two need to equal 360-140 = 220
They are both the same so one angle needs to equal 220/2 = 110
Now find x:
X + 60 = 110
Subtract 60 from both sides:
X = 50. The answer is D
Mario and tabitha are calculating the probability of getting a 4 and a 2 if they roll a die twice. Who is correct?
Answers
Answer:
[tex]\frac{2}{12}[/tex] simplified to [tex]\frac{1}{6}[/tex]
Step-by-step explanation:
4 = [tex]\frac{1}{12}[/tex]
2 = [tex]\frac{1}{12}[/tex]
[tex]\frac{1}{12}[/tex] + [tex]\frac{1}{12}[/tex] = [tex]\frac{2}{12}[/tex] ÷ 2 = [tex]\frac{1}{6}[/tex]
the diagram shows a circle drawn inside a square the circle touches the edges of the square
Answers
Answer:
69.5309950592 cm²
Step-by-step explanation:
Area of Square:
Area = [tex]Length * Length[/tex]
Area = 18*18
Area = 324 square cm
Area of circle:
Diameter = 18 cm
Radius = 9 cm
Area = [tex]\pi r^2[/tex]
Area = (3.14)(9)²
Area = (3.14)(81)
Area = 254.469004941 square cm
Area of Shaded area:
=> Area of square - Area of circle
=> 324 - 254.469004941
=> 69.5309950592 cm²