Answer:
464.1 km
Explanation:
Using R = u²sin2Ф/g where R = range of projectile, u = muzzle speed = 2.20 km/s = 2.20 × 10³ m/s, Ф = angle of elevation or projection angle = 55° and g = acceleration du° to gravity = 9.8 m/s²
Substituting the values of the variables into the equation, we have
R = u²sin2Ф/g
R = (2.20 × 10³ m/s)²sin2(55°)/9.8 m/s²
R = 4.84 × 10⁶ m²/s²sin110°/9.8 m/s²
R = 4.84 × 10⁶ m²/s² × 0.9397/9.8 m/s²
R = 4.548 × 10⁶ m²/s²/9.8 m/s²
R = 0.4641 × 10⁶ m
R = 464.1 × 10³ m
R = 464.1 km
Describe the movements that occur along each of the three types of faults. Describe the movements that occur along each of the three types of faults.
Answer:
Explanation:
strike-slip, normal and thrust
mark her as brainiest, :) I don't need it :P
Which of the following has the most kinetic energy?
A. A 25-kg fish tank sitting on a table
B. A 50-g fish swimming in a fish tank
C. A 7,500-kg car parked on a steep hill
D. A 50-kg Boulder suspended from a cliff
Answer:
The answer is B
Explanation:
Only things that are moving have kinetic energy, therefore B is the only correct answer
why should we measure accurately
Answer:
To obtain fair results
Explanation:
if we don't measure the results might give unfair results
Answer:
Accurate measurement s r important bcz precise amounts r required for reaçtiøñ#s tø take place før a recipe tø turn out ãnd tø keep correct records of A measurement
uR ANSWER HOPE IT HELPS YOU...Which term BEST describes energy
stored in batteries and food?
potential energy
kinetic energy
heat energy
chemical energy
A nucleus with mass number 229 emits a 3.443 MeV alpha particle. Calculate the disintegration energy Q for this process, taking the recoil energy of the residual nucleus into account.
Answer:
3.504 MeV
Explanation:
Given that;[tex]\frac{A}{Z} X ---->\frac{A-4}{Z-2} Y +\alpha + Q[/tex]
Also;
[tex]Q= KE_{\alpha } (M_{Y} + M_{\alpha } /M_{Y[/tex])
Mass number of X = 229
Mass number of Y = 225
Mass number of alpha particles = 4
Kinetic energy of alpha particles = 3.443 MeV
Q = 3.443 MeV (225 + 4/225)
Q= 3.504 MeV
A force of 20N displaces an object to 5m in 10s. Calculate the power.
Answer:
hope it helps you see the attachment for further information
4. A girl is sitting on a tire swing that is attached with a rope that is 2.1 m in length. Her dad pushes her with a speed of 3.0 m/s. If the centripetal force is 88 N, what is the mass of the girl?
A beam strikes an irregular mirror and is reflected as shown below. The angle formed by the incoming beam and the reflected beam is 10 degrees. What is the angle of the mirror's surface (measured against vertical) at the location where the beam strikes the mirror?
A. The mirror's surface is angled 5 degrees upward where the laser strikes it.
B. The mirror's surface is angled 5 degrees downward where the laser strikes it.
C. The mirror's surface is angled 10 degrees upward where the laser strikes it.
D. The mirror's surface is angled 10 degrees downward where the laser strikes it.
Answer:
the correct answer is B
Explanation:
The law of reflection states that the angles of incidence and reflection on a surface are the same, the two rays and the normal are in the same part of the surface.
In this exercise indicate that the angle between the incident and reflected ray is 10, therefore the angle with respect to the normal that is a vertical line at the point of contact of the ray must be 5
Consequently the correct answer is B
Which of the following statements explains how total time spent in the air is affected as a projectile's angle of launch is increased from 25 degrees to 50 degrees?
Answer:
Therefore letter C is the correct answer.
Explanation:
In a projectile motion the total time in the air can be calculated using the following equation:
We analyze the y-component motion.
[tex]v_{fy}=v_{iy}-gt[/tex]
When the final velocity (v(f)) is equal to zero we calculate the upward time and multiplying it by 2 we find the total time in the air. So we will have:
[tex]t_{tot}=2\frac{v_{iy}}{g}[/tex]
[tex]t_{tot}=2\frac{v_{i}sin(\theta)}{g}[/tex]
We can see that the total time is directly proportional to the angle, then when θ increase t increase.
Therefore letter C is the correct answer.
I hope it helps you!
which of the following is a vector physical quantity
a. speed
b. energy
c. mass
d. displacement
Answer:
D. displacement
Explanation:
Vector quantities have both magnitude and direction.
Scalar quantities have only magnitude.
A 330.-ohm resistor is connected to a 5.00-volt battery. What is the current through the resistor?
Answer:
From Ohms Law
V=IR
V=5volts
R=33.0hms
I=V/R
I= 5/330
=0.0152A
The current flowing through the cross-section of the resistor is 0.0152A.
Given the data in the question;
Resistance; [tex]R = 330ohm[/tex]Voltage; [tex]V = 5.00V[/tex]Current; [tex]I = \ ?[/tex]Ohm's lawOhm's law states that "the current flowing through the cross-section of a conductor is directly proportional to the voltage across it".
It is expressed as;
[tex]V = IR[/tex]
Where V is voltage, I is current and R is the Resistance.
To determine the current flowing through the resistor, we substitute our given values into the expression above.
[tex]V = IR\\\\I = \frac{V}{R}\\ \\I = \frac{5.00V}{330\ Ohm} \\\\I = 0.0152A[/tex]
Therefore, the current flowing through the cross-section of the resistor is 0.0152A.
Learn more about Electric current here: https://brainly.com/question/2264542
hii can someone pls help me??
F = ma
F = 8.5 × 6
F = 51 N
................
A forensics investigator discharged an assault rifle-replica such that the bullet fired at an angle of 30 (degrees) off the horizontal with an initial velocity
of 28
m/s northwest. What is the maximum height the bullet will reach?
O 14 m/s
10 m
O 30 km
O 0.4351 seconds
Answer:
Initial y-component of speed
Vy = 28 * sin 30 = 14 m/sec vertically
1/2 m Vy^2 = 2 m g h conservation of energy of y-component
h = Vy^2 / (2 * g) = 14^2 / (2 * 9.8) = 10 m
What is the pressure on your feet if you weigh 800 N and the area covered by your feet is 0.67 m^2?
Answer:
Pressure = 1194.03 N/m
Explanation:
Given the following data;
Force = 800 N
Area = 0.67 m²
To find the pressure on your feet;
Mathematically, pressure is given by the formula;
Pressure = force/area
Pressure = 800/0.67
Pressure = 1194.03 N/m
Why x rays have different properties from light even though both originate from orbital transition of electrons in excited atoms?
Answer:
he difference between X-rays and visible radiation is in the energy of each foton.
Explanation:
Visible light and X-rays are electromagnetism waves with the same origin betray the atomic, but the energy of transioin wings is different,
E = h (v_f - v₀)
With this equation we see that the energy is proportional to the difference between the atomic levels where the ranscion occurs, the X-rays the transition involves deep levels n = 1 or 2 for which the energy of the emitted photon is very high.
The visible radiation the transition is between levels closer so that the emitted light has a lower frequency and is in the range of the visibly
Consequently, the difference between X-rays and visible radiation is in the energy of each foton.
An obect is placed 20cm from a convex mirror of focal length 12cm. where does the image form?
Answer:
7.5 cm behind the mirror
Explanation:
Applying,
Using the real is positive convection: All real distance from the mirror are positive
1/f = 1/v+1/u................. Equation 1
Where f = focal length of the mirror, v = image distance, u = object distance
From the question,
f = -12 cm, u = 20 cm
substitute these value into equation 1
1/(-12) = (1/20)+1/v
(-1/12)-(1/20) = 1/v
1/v = (-5-3)/60
1/v = -8/60
v = -60/8
v = -7.5 cm
Hence the image is formed 7.5 cm behind the mirror.
which answer is it??
Answer:
hmm...
Explanation:
Answer: wave a has the higher ampllitude while wave b has the lower amplitude.
Explanation:
wave a has the amplitude of 4 while wave b has the amplitude of one
plsss helpp i really need this now thank u ❤️
Answer:
10.
parabolic
11.
Entirely horizontal
12.
45°
A plane travels at an average speed of 600 kilometers per hour. How long
does it take the plane to travel 120 kilometers?
Answer:
12 mins
Explanation:
120km/600km = 1/5 or .2
60mins*0.2 = 12 mins
20 POINTS:
Why does the initial hill of a roller coaster need to be steep?
Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity
Hope this helps! Good luck with future homework and exams!
How many Americans get sick from consuming contaminated food/water each year
Answer:
48 million people get sick, 128,000 are hospitalized, and 3,000 die
Explanation:
Answer:
48 million is get sick from consuming contaminated food/water each 6ear
on what factors, current sensitivity voltage sensitivity of
a galvanometer depend?
That depends upon several factors
Number of turns of coilCurrent flowing through the galvanometerTorsion constant of suspension fibreStrength of magnetic fieldRestoring force.An object of mass m is acted upon by a net force F and experiences an acceleration of a. The same object is then acted upon by a net force of ½ F. What is the resulting acceleration in terms of a?
a. a
b. 2a
c. ½ a
d. ¼ a
Answer:
heyyyy
Explanation:
sorry i need points
Einstein's theory of general relativity is currently the best explanation of gravity.Why has this theory not been replaced with a new one
Answer:
Option C, It still explains the experimental evidence pertaining to gravity
Explanation:
Please find the attachment
Answer:
A.) It will remain the best explanation, because no one has come up with a better one yet
Explanation:
The Doppler shift involves a shift in the ___________________. Check all that apply. Group of answer choices actual intensity produced by the source of sound actual frequency produced by the source of sound the perceived pitch of sound observed by a listener the loudness of sound observed by a listener none of these
Answer:
actual frequency produced by the source of sound
Explanation:
According to Oxford dictionary; Doppler effect is"an increase (or decrease) in the frequency of sound, light, or other waves as the source and observer move towards (or away from) each other."
The actual change in frequency of a wave is called the Doppler shift. The Doppler shift is caused by a constant relative motion between the source of the wave and the observer. This leads to a change in the observed frequency of the wave.
Please Help with thia question
Answer:
the types of force shown in the picture is
balanced force.
se lanza un cuerpo desde el origen con velocidad horizontal de 40 m/s, y con un ángulo de 60º. calcular la máxima altura y el alcance horizontal.
Answer:
1. [tex]h = 244.8 m[/tex]
2. [tex]x = 564.8 m[/tex]
Explanation:
1. La altura máxima se puede calcular usando la siguiente ecuación:
[tex] v_{f}^{2} = v_{0}^{2} - 2gh [/tex] (1)
Where:
[tex]v_{f_{y}}[/tex]: es la velocidad final = 0 (en la altura máxima)
[tex]v_{0_{y}}[/tex]: es la velocidad inicial horizontal en "y"
g: es la gravedad = 9.81 m/s²
h: es la altura máxima =?
La velocidad incial en "y" se puede calcular de la siguiente manera:
[tex] tan(\theta) = \frac{v_{0_{y}}}{v_{0_{x}}} [/tex]
[tex] v_{0_{y}} = tan(60)*40 m/s = 69.3 m/s [/tex]
Resolviendo la ecuación (1) para "h" tenemos:
[tex]h = \frac{v_{0_{y}}^{2}}{2g} = \frac{(69.3 m/s)^{2}}{2*9.81 m/s^{2}} = 244.8 m[/tex]
2. Para calcular el alcance horizontal podemos usar la ecuación:
[tex]x = v_{x}*t[/tex]
Primero debemos encontrar el tiempo cuando la altura es máxima ([tex]v_{f_{y}}[/tex] = 0).
[tex] v_{f_{y}} = v_{0_{y}} - gt [/tex]
[tex] t = \frac{v_{0_{y}}}{g} = \frac{69.3 m/s}{9.81 m/s^{2}} = 7.06 s [/tex]
Ahora, como el tiempo de subida es el mismo que el tiempo de bajada, el tiempo máximo es:
[tex] t_{m} = 2*7.06 s = 14.12 s [/tex]
Finalmente, el alcance horizontal es:
[tex]x = 40 m/s*14.12 s = 564.8 m[/tex]
Espero que te sea de utilidad!
true or false force vectors have direction only
Answer:
The answer is true
Explanation:
:D
pls help will mark brainliest, pls
Answer:
The answer is true. This is correct.
On what factors does critical velocity depend on
Explanation:
The critical velocity is that velocity of liquid flow, up to which its flow is streamlined (laminar)& above which its flow becomes turbulent. It's denoted by Vc & it depends upon: Coefficient of viscosity of liquid (η) Density of liquid. Radius of the tube.