Answer:
240 kilometer
Explanation:
ur just mutipling the number by 2
Your average speed was 70.0 Kilometers per hour (km/h)
At an amusemlec 27 collisions and powerent park, a 96.0 kg car moving with a speed v bounces elastically off a 135-kg bumper car at rest. If the final speed of the 135-kg car is 1.03 m/s, what is the initial speed of the 96.0-kg car?
By conservation of momentum :
[tex]m_1u_1 + m_2u_2 = m_1v_1 + m_2v_2\\\\96v + 0 = 96v_1 + 135\times 1.03\\\\96v = 96v_1 +139.05 \ \ \ \ \ \ .....1[/tex]
By conservation of energy :
[tex]\dfrac{m_1u_1^2}{2}+\dfrac{m_1u_2^2}{2} =\dfrac{m_2v_1^2}{2} +\dfrac{m_2v_2^2}{2}\\\\96v^2 + 0 = 96v_1^2 + 135(1.03)^2\\\\96v^2 = 96v_1^2 +143.22 \ \ \ \ \ ....2)[/tex]
Solving equation 1 and 2, we get :
v = 1.23 m/s
Therefore, the initial speed of 96 kg car is 1.23 m/s .
Lab - Wave Properties in a Spring
11-05
The wave characteristics you will observe in this lab are common to all waves (water, light, sound,
etc.). Use your prior knowledge and the book to fill in the following blanks, then go in the hall and
perform the lab.
A wave is a disturbance that moves through (propagates) through empty space or through a
_____________. There are two types of waves. A _____________________ wave requires
matter to travel. List some examples of this type:
A _____________________ wave does not require a medium. Examples include:
In order to start and transmit a mechanical wave, a source of _____________ and an
_______________ medium are required. A single disturbance is referred to as a
_______________, and a series of disturbances is a wave __________.
The questions in bold are those you should observe directly. Others will be answered using the book.
A. TYPES OF MECHANICAL WAVES: In the hall, stretch the slinky on the floor until it is
stretched (but still loose). Practice sending single pulses down the slinky by popping your wrist
from the center to the side and back to the center. Then send a continuous wave train along as
your partner holds the other end still. A piece of ribbon should be tied to one coil. Watch the
motion of this ribbon (representing a particle) as the wave travels through the spring.
In this type of wave, the particles move (perpendicular, parallel)
to the direction the wave travels. This type of wave is called a __________________ wave.
Its pulses are called ________________ and ________________.
Now send a pulse by quickly pushing the spring forward and pulling
it back, as shown. This type of wave is called _______________. Watch the motion of the ribbon.
In this type, the particles move _____________ to the direction the wave travels. Its pulses
are called _____________ and _____________. Label each.
Note that all waves transfer _____________ without transferring _______________. In
mechanical waves, particles of the medium vibrate back and forth in simple harmonic motion while
the disturbance (or _____________) moves from one place to another.
B. WAVE SPEED
Send a large pulse, followed by a small one. Does one pulse catch up to the other? ______
(Hint: The person who sends these waves should watch how the waves look when they return. Make
sure that both pulses are large enough initially to make it back to the sender!) The size of the
pulse is called the __________________ of the wave. Did the size affect the speed? ______
Generate a single transverse pulse in the slinky, keeping the stretch constant. Using a stopwatch,
time the journey of the pulse from one end to the other and back again. Take the average of
several trials. _________
Without changing your positions on the floor (therefore keeping the _____________ the pulse
travels the same), pull the slinky tighter using only about 3/4 of the coils. This makes a completely
different medium through which the pulse will travel. Time the journey as before. ___________
Does the kind of medium affect the speed of the pulse? ___________
Lab – Wave Properties in a Spring ____________________
PHYSICSFundamentals
© 2004, GPB
11-06
C. WAVELENGTH AND FREQUENCY
Shake the slinky back and forth steadily to send a
transverse wave train while your partner holds the other end still. On the diagram, label wavelength
(- Greek letter lambda). The frequency of the wave depends on how fast you shake the slinky.
Shake it regularly but slowly, then regularly but rapidly.
Higher frequency waves are generated by shaking the spring (slowly, rapidly). High frequency
waves have (short, long) wavelengths, and low frequency waves have __________.
The speed of a wave in any medium is equal to the _______________ of the wave X
________________. This wave equation ___________________ shows that f and are
______________ proportional. Write the units for each of the variables in this equation.
The exercise involves filling in the gaps with the possible wave
properties that can be obtained from a spring.
How is the Wave Properties in a Spring Lab exercise correctly completed?The correctly completed exercise is presented as follows;
A wave is a disturbance that moves through a medium. There are two
types of waves. A mechanical wave requires matter to travel. List some
examples of this type: sound wave, water wave, spring waves.
A electromagnetic wave does not require a medium. Examples include: Light waves
In order to start and transmit a mechanical wave, a source of
disturbance and a physical medium are required. A single disturbance is
referred to as a pulse, and a series of disturbance is a wave train.
This type of wave is called transverse wave. Its pulses are called crest
and troughs.
Now send a pulse by quickly pushing the spring forward and pulling it
back, as shown. This type of wave is called longitudinal wave. Watch the
motion of the ribbon. In this type, the particles move parallel to the
direction the wave travels. Its pulses are called compression and
rarefactions. Note that all waves transfer energy without transferring
matter. In mechanical waves, particle of the medium vibrate back and
forth in simple harmonic motion while the disturbance (or energy)
moves from one place to another.
B. Wave speed
Does the pulse catch up to the other? yes. The size of the pulse is called
the amplitude of the wave.
Did the size of the pulse affect the speed? No.
The average time wave it takes the wave to travel
Without changing your positions therefore keeping the distance the
pulse travels the same), pull the slinky tighter using only about 3/4 of
coils. This makes a completely different medium through which the
pulse will travel. Time the journey as before time record. Does the kind
of medium affect the speed of the pulse? Yes
C. Wavelength and Frequency
High frequency waves have short wavelengths and low frequency waves
have long wavelengths.
The speed of a wave in any medium is equal to the frequency of the wave × the wavelength. This wave equation [tex]\underline{f = \dfrac{v}{\lambda } }[/tex] shows that f and λ are
inversely proportional. The units of the variables are;
Units of the frequency, f is hertz unit HzUnits of the velocity, v, is m/sUnits of the wavelength, λ, is meters (m)Learn more about waves here:
https://brainly.com/question/14118172
Which technology contains at least one permanent magnet?
A. A gasoline engine
B. An electrical circuit
C. An electromagnet
D. An electric generator
ASAP plz
Answer:
C. An electromagnet
Explanation:
Answer: D. An electric generator
A bowling ball is 21.6 cm in diameter. What is the angular speed of these ball whenit is moving at 3.0 m/s?
Answer:
Angular speed = 27.78 rad/s (Approx)
Explanation:
Given:
Diameter = 21.6 cm
Speed = 3 m/s
Find:
Angular speed
Computation:
Radius = 21.6 / 2 = 10.8 cm = 0.108 m
Angular speed = v / r
Angular speed = 3 / 0.108
Angular speed = 27.78 rad/s (Approx)
A stretched string is observed to have four equal segments in a standing wave driven at a frequency of 480 Hz. What driving frequency will set up a standing wave with five equal segments?
a) 360 Hz.b) 240 Hz.c) 600 Hz.d) 120 Hz.
Answer:
C) 600 Hz
Explanation:
The fundamental frequency can be related to the driving frequency by the expression below;
f(n) = n * f(1)
Where f(1)= fundamental frequency
f(n) = driving frequency
There are four equal segments in the standing wave , then our n= 4 and our f(n)=4, then we can get the fundamental frequency here
f(4) = 4× f(1)
480 = 4× f(1)
f(1) = 480/4
f(1)=120Hz
Hence, fundamental frequency is 120Hz
To calculate the driving frequency that will set up a standing wave with five equal segments?
n=5
f(n) = n× 120Hz
f(5) = 5×120Hz
= 600Hz.
Hence, the driving frequency that will set up a standing wave with five equal segments is 600Hz
What happens to the molecules of water when it moves from a liquid to a gas?
A. Water molecules condense and move slower.
B. Water molecules spread out and move slower.
C. Water molecules spread out and move faster.
D. Water molecules condense and move faster.
its A or D but im not sure which one ik it moves fast
A 50.0 kg object is moving at 18.2 m/s when a 200 N force is applied opposite the direction of the objects motion, causing it to slow down to 12.6 m/s. How long was this force applies?
Answer:
t = 1.4[s]
Explanation:
To solve this problem we must use the principle of conservation of linear momentum, which tells us that momentum is conserved before and after applying a force to a body. We must remember that the impulse can be calculated by means of the following equation.
[tex]P=m*v\\or\\P=F*t[/tex]
where:
P = impulse or lineal momentum [kg*m/s]
m = mass = 50 [kg]
v = velocity [m/s]
F = force = 200[N]
t = time = [s]
Now we must be clear that the final linear momentum must be equal to the original linear momentum plus the applied momentum. In this way we can deduce the following equation.
[tex](m_{1}*v_{1})-F*t=(m_{1}*v_{2})[/tex]
where:
m₁ = mass of the object = 50 [kg]
v₁ = velocity of the object before the impulse = 18.2 [m/s]
v₂ = velocity of the object after the impulse = 12.6 [m/s]
[tex](50*18.2)-200*t=50*12.6\\910-200*t=630\\200*t=910-630\\200*t=280\\t=1.4[s][/tex]
What is the most important factor that determines the thickness, and therefore strength, of the lithosphere?
Answer:
Internal temperature
Explanation:
The temperature of the lithosphere has been said to vary across range of temperature values. From a temperature of the crust of about zero degrees Celsius (or 32 degrees Fahrenheit) to a temperature of around 500 degrees Celsius (932 degrees Fahrenheit) for that of the upper mantle. This said temperature is the most crucial factor in determining the strength, the thickness and thereof of the lithosphere
A rock is at the top of a 20 meter tall hill. The rock has a mass of 10 kg. How much potential energy does it have?
Answer:
1960 JExplanation:
The potential energy of a body can be found by using the formula
PE = mgh
where
m is the mass
h is the height
g is the acceleration due to gravity which is 9.8 m/s²
PE = 10 × 9.8 × 20
We have the final answer as
1960 JHope this helps you
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal. How long is it in the air?
Given :
Brandon hits a golf ball with an initial velocity of 30 m/s at an angle of 30 above the horizontal.
To Find :
How long is it in the air.
Solution :
We know, the formula of time of flight is :
[tex]T = \dfrac{2usin\ \theta}{g}\\\\T = \dfrac{2\times 30\times sin\ 30^o}{9.8}\\\\T = 3.06\ seconds[/tex]
Therefore, the ball is in air for 3.06 seconds.
The decibel scale intensity for busy traffic is 80 dB. Two people having a loud conversation have a decibel intensity of 70 dB. What is the approximate combined sound intensity?
Given :
The decibel scale intensity for busy traffic is 80 dB.
Two people having a loud conversation have a decibel intensity of 70 dB.
To Find :
The approximate combined sound intensity.
Solution :
We know, intensity in decibel can be converted to W/m² by :
[tex]\beta(dB) = 10\ log_{10}( \dfrac{I}{I_o})[/tex]
Putting intensity in decibel scale, we get :
[tex]I(80\ dB ) =10^{-4}\ W/m^2\\\\I(70\ dB ) = 10^{-5}\ W/m^2[/tex]
Let, combine intensity is I .
I = I(80 dB) + I(70 dB)
[tex]I = 10^{-4} + 10^{-5} \ W/m^2\\\\I = 1.1 \times 10^{-4} \ W/m^2[/tex]
Therefore, the combined sound intensity is [tex]1.1 \times 10^{-4} \ W/m^2[/tex] .
A rigid tank contains an ideal gas at 300 kPa and 600 K. Now half of the gas is withdrawn from the tank and the gas is found at 100 kPa at the end of the process. Determine (a) the final temperature of the gas and (b) the final pressure if no mass was withdrawn from the tank and the same final temperature was reached at the end of the process.
which property of an object is not changed by a force
Calculate the mechanical advantage of a ramp if the box you are trying to move has a mass of 10 kilograms, the
board is 15 feet long and the height of the ramp is 5 feet .
3
300
150
45
Answer:
[tex]MA = 3[/tex]
Explanation:
Given
[tex]Box = 10kg[/tex]
[tex]Ramp\ Height = 5ft[/tex]
[tex]Ramp\ Length = 15ft[/tex]
Required
Determine the mechanical advantage
This is calculated as follows:
[tex]MA = \frac{Ramp\ Length}{Ramp\ Height}[/tex]
[tex]MA = \frac{15ft}{5ft}[/tex]
[tex]MA = 3[/tex]
Hence, the mechanical advantage is 3
An observer sitting on shore sees a canoe traveling 5.0 m/s east, and a sailboat traveling 15.0 m/s west. What is the velocity of the sailboat as observed on the canoe (relative to the canoe)?
Answer:
Vs/c = 20 [m/s]
Explanation:
This is a problem of relative velocities, as velocity is a vector we can use addition or subtraction of vectors for the solution.
We are asked for the velocity of the sailboat with respect to an observer located in the canoe.
[tex]V_{s/c}=V_{sailboat}-V_{canoe}\\V_{s/c}=15-(-5)\\V_{s/c}=20[m/s][/tex]
Why is the speed of the canoe negative?, it is negative because the canoe moves in the opposite direction to the sailboat.
You take a trip that covers 240 kilometers and takes 4 hours. Your average speed is
Answer:
Your average speed is 60 kilometers per hour
Explanation:
240 divided by 4 is 60
240/4=60
Р.ЗА.3
7. Which behavior does the picture show?:
A. The wave speed is decreasing
B. The amplitude increases
Answer:
b. the amplitude increases
Explanation:
because that's not wave
A 500-eV electron and a 300-eV electron trapped in a uniform magnetic field move in circular paths in a plane perpendicular to the magnetic field. What is the ratio of the radii of their orbits?
a. 2.8
b. 1.7.
c. 1.3.
d. 4.0.
e. 1.0.
Answer:ratio of the radii of their orbits = 1.3 --- C
Explanation:
1- eV = to the kinetic energy of the electrons
and kinetic energy is given as
K.E= 1/2mv2
v = √(2E/m)----- equation 1
The force on the particles relating to the magnetic and circular motion ( centripetal force is given as
F = magnetic force = centripetal force
F= qvB = mv2/r
qvB = mv2/r
r = mv/qB ------ equation 2
We know from equation 1 that v = √(2E/m)
Therefore,
r = √(2mE)/qB------ equation 3
We can now say that the ratio of the two radii of their orbits can be calculated as
r1/r2 =(√(2mE1)/qB) /(√(2mE2)/qB
Where E1 = 500-eV and E2 = 300-eV (1- eV = to the kinetic energy of the electrons)
r1/r2 = (√(2m x500)/qB) /(√(2mx 300)/qB
Cancelling out common variables, we are left with
r1/r2 =[tex]\sqrt{500/300}[/tex]
r1/r2= 1.29 ≈ 1.3
If the social distancing length between two students is doubled from two metered to four meters, does the gravitational force between the two students increase or decrease?
Explain your reasoning!
Answer:
the gravitational force decreases
Which substance may lower air temperatures after a volcanic eruption?
lava
sulfur dioxide
carbon dioxide
water vapor
The awnser is sulfur dioxide.
The gas that is responsible for lowering the temperature is sulfur dioxide gas.
A volcanic eruption refers to the sudden escape of lava and gases from the earth's core. It usually occurs at a very high temperature. The solidification of the volcano leads to rock formation.
During a volcanic eruption, the gas that is responsible for lowering the temperature is sulfur dioxide gas.
Learn more: https://brainly.com/question/1622004
A motorcycle skids for a distance of 2.0 m with the icy road pushing on its tires with force of 120 N as its
brakes are applied
What is the change in kinetic energy for the motorcycle?
Round the answer to two significant digits.
Answer:
-240
Explanation:
A motorcycle skids for a distance of 2.0 m on an icy road, then the change in kinetic energy for the motorcycle will be equal to -240 J.
What is kinetic energy?The force which a moving object has is referred to as kinetic energy in physics. It is defined as the number of effort required to propel a person of a specific mass from still to a specific velocity.
Aside from slight fluctuations in speed, your body holds onto the kinetic energy it obtains during acceleration.
When the body slows down from its present level to a condition of rest, the same quantity of energy is used.
Formally, kinetic energy is any quantity that has a gradient concerning time in the Lagrangian of a system.
As per the given information in the question,
Distance, d = 2.0 m
Friction, f = 120 N
The angle between displacement and friction force, θ = 180°
Now, the change in kinetic energy for the motorcycle = Work done by the friction.
K.E = f × d(cos θ)
= 120 (2.0 m)(cos 180°)
Δ K.E = -240 J
To know more about Kinetic energy:
https://brainly.com/question/26472013
#SPJ2
a wandering dog walks 1 km due east, 1 km due south, then runs 2 km due west. the magnitude of the dogs displacement is closest to
a. 0 km
b. 1.4 km
c. 3.4 km
d. 4.0 km
Answer:
b) 1.4km
Explanation:
Marie walks to the store, 10 blocks east of home. She returns home for lunch and then goes back to the school in 1.5 hours. What is her displacement? What is her speed?
The speed and displacement are 6.66 m/s and 10 blocks east, respectively. The total distance traveled is larger than the displacement between those two points if an object changes direction while traveling.
Displacement: Is it a distance?
Sometimes people mistakenly believe that distance and displacement are simply two different labels for the same thing. Displacement and distance, however, are two distinct ideas. The overall distance traveled by an object during its voyage will be larger than the displacement if it changes direction.
What does displacement mean in one sentence?
The smallest (straight line) distance between a body's initial location and its final position—represented by an arrow pointing from the starting position to the final position—is referred to as a body's displacement when it moves from one position to another.
Briefing:
speed=10/1.5
=6.66m/s
displacement=10 block toward east.
To know more about displacement visit:
https://brainly.com/question/11934397
#SPJ1
During a hockey game, a puck is given an initial speed of 10 m/s. It slides 50 m on the horizontal ice before it stops due to friction. What is the coefficient of kinetic friction between the pick and the ice.A) 0.12B) 0.10C) 0.11D) 0.090
Answer:
The value is [tex]\mu_k = 0.102[/tex]
Explanation:
From the question we are told that
The initial speed of the pluck is [tex]u = 10 \ m/s[/tex]
The distance it slides on the horizontal ice is [tex]s = 50 \ m[/tex]
Generally from kinematic equation we have that
[tex]v^2 = u^2 + 2as[/tex]
Here v is is the final velocity and the value is 0 m/s given that the pluck came to rest, so
[tex]0^2 = 10 ^2 + 2* a * 50[/tex]
=> [tex]a = - 1 \ m/s^2[/tex]
Here the negative sign show that the pluck is decelerating
Generally the force applied on the pluck is equal to the frictional force experienced by the pluck
So
[tex]F = F_f[/tex]
=> [tex]m * a = m* g * \mu_k[/tex]
=> [tex]1 = 9.8 * \mu_k[/tex]
=> [tex]\mu_k = 0.102[/tex]
A major league pitcher can throw a baseball an excess of
what is the difference between total distance covered vs. total displacement of the rube goldberg
Answer:
The deer traveled 1300m + 500m + 300m, for a total distance. The exact same motion, distance and displacement have significantly different values. It tells you the rate at which an object's displacement, or position, changes.
Total distance covered is amount of distance cover during the course whereas total displacement is difference between initial and final position.
What is distance?Distance is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.
What is displacement?The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place. For instance, if an object shifts from location A to position B, its position changes. Displacement is the term used to describe this shift in an object's position.
Hence total distance covered and total displacement are different. Total distance covered is amount of distance cover during the course whereas total displacement is difference between initial and final position.
Learn more about displacement here:
https://brainly.com/question/11934397
#SPJ2
Match the following. Match the items in the left column to the items in the right column.
1. index fossil
study of fossils
2. law of original lateral continuity
study of rock layers and the processes that form them
3. law of superposition
a fossil that is widespread geographically but only occurs in one layer or a small number of layers of rock
4. paleontology
sediment deposited into water will spread in a horizontal and continuous sheet
5. stratigraphy
any undisturbed sequence of layered rocks has the oldest rock on the bottom and newest rock on the top
Answer:
1. A fossil that is widespread geographically but only occurs in one layer or a small number of layers of rock
2. Sediment deposited into water will spread in a horizontal and continuous sheet
3. Any undisturbed sequence of layered rocks has the oldest rock on the bottom and newest rock on the top
4. Study of fossils
5. Study of rock layers and the process that form them
Sorry if any of these are wrong
What causes hot air to rise from the pavement on a hot summer day?
Answer:
radation because the heat gets too intense and is forced to rise
A plumber applies a torque of 408 to a bolt using a wrench. If he moves his hand twice as far
away on the wrench's handle from the bolt (doubling the radius), but applies the same force
as before, how much torque will he now apply?
Answer:
816
Explanation:
We must remember that torque is defined as the product of a force by a distance.
This distance is measured from the pivot point of the Bolt to the point where the force is applied. in this way, we have the following equation to be able to determine the torque.
[tex]T=F*d[/tex]
Now if we double the turning distance we have the torque should also be double.
[tex]T =F*2*d[/tex]
A radioactive nuclide of atomic number Z emits an alpha particle and the daughter nucleus then emits a beta particle. What is the atomic number of resulting nuclide?
A) Z-1
B) Z+1
C) Z-2
D) Z-3
Answer:
A) Z-1
Explanation:
when a radioactive element of atomic number Z emits an alpha particle, the mass of the new nucleus decreases by 2, i.e the new atomic number of the element = ( Z- 2).
Also, when the daughter nucleus emits a beta particle, the new nucleus increases by 1, that is the new atomic number of the element = (Z + 1).
Thus, the atomic number of resulting nuclide = Z ( - 2) + ( + 1).
= Z - 2 + 1
= Z - 1
Therefore, the atomic number of resulting nuclide is Z - 1