Answer:
Temperature is a measure of "average kinetic energy" of the particles in an object
The compound that forms between nitrogen and chlorine is
a. ionic
b. molecular/covalent
Answer:
Covalent bonding is a type of chemical bonding which is characterized by atoms sharing electrons. For nitrogen and chlorine to covalently bond, nitrogen needs 3 electrons. Chlorine only has one electron therefore two more chlorine molecules are needed. Because one atom of nitrogen needs 3 atoms of chlorine to bond, the formula will be NCl3.
A student wants to make 50-mL of a 0.6 mg/L solution of acetic acid. She will be making the solution by diluting a stock with a concentration of 2.0 mg/L. Put the steps for her dilution in order. 4. Cap the flask and invert several times to mix. 2. Fill the volumetric flask with deionized water until the meniscus touches the mark. 6. Swirl the flask to mix the contents. 1. Obtain a 50-mL volumetric flask. 3. Use a pipet to add the appropriate volume of stock solution to the flask. 2. Add approximately 10 mL of deionized water to the empty flask.
Answer:
The steps in order are;
1. Obtain a 50-mL volumetric flask
2. Add approximately 10 mL of deionized water to the empty flask
3. Use a pipet to add the appropriate volume of stock solution to the flask
4. Cap the flask and invert several times to mix
5. Fill the volumetric flask with deionized water until the meniscus touches the mark
6. Swirl the flask to mix the contents
The volume of the acetic acid to be added to the solution is 15 mL
Explanation:
The given steps are;
4. Cap the flask and invert several times to mix
5. Fill the volumetric flask with deionized water until the meniscus touches the mark
6. Swirl the flask to mix the contents
1. Obtain a 50-mL volumetric flask
3. Use a pipet to add the appropriate volume of stock solution to the flask
2. Add approximately 10 mL of deionized water to the empty flask
The given parameters are;
The volume of the volumetric flask = 50-mL
The concentration of the final solution of acetic acid = 0.6 mg/L
The concentration of the stock solution = 2.0 mg/L
Let 'x' represent the volume of the stock solution added, we have;
2.0 mg/L·x + (50 - x)×0 = 0.6 mg/L × 50-mL
x = 0.6 mg/L × 50-mL/(2.0 mg/L) = 15 mL
The volume of the stock solution to be added, x = 15 mL
3.0 moles of BaO are mixed evenly into a 2.0 L. What is the molarity of this
solution?
Answer: 1.5 moles/L
Explanation:
Molarity = moles/ Liters
to find the molarity of BaO: 3moles/2L = 1.5 moles/L
Who coined the term "ridgeology"?
Answer:
David R. Ashbaugh
Explanation:
David R. Ashbaugh is a Canadian police officer known for his extensive research on the friction ridge identification, introducing for the first time the use of the term ridgeology in forensic identification and the ACE-V methodology.
I can't leave till I answer please help!!
Answer:
The answer is 2 all you do is divide the 6.02 and 3.01 and you get 2
Which of the following describes an exothermic reaction?
An exothermic reaction is described by ΔH(reactants) is greater than ΔH( products) and the correct option is option A.
What is Exothermic reaction?The word exothermic means “releasing heat.” Energy, often in the form of heat, is released as an exothermic reaction proceeds.
Enthalpy of a reaction is defined as the heat energy change (Δ H) that takes place when reactants go to products. If heat is absorbed during the reaction, Δ H is positive; if heat is released, then Δ H is negative.
ΔH value negative –> energy released –> exothermic reaction
ΔH value positive –> energy absorbed –> endothermic reaction
Therefore, an exothermic reaction is described by ΔH(reactants) is greater than ΔH( products) and the correct option is option A.
Learn more about Exothermic reactions, here:
https://brainly.com/question/10373907
#SPJ1
why is it necessary to specify temperature when giving Ka value
Answer:
Because the equilibrium constant is only at constant at temperature. Changing the temperature changes the Ka.
Describe how the particles are arranged in a solid, liquid, and gas.
Answer:
Particles in a: gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
Explanation:
CAN SOMEBODY PLS HELP...
Answer:
Maybe you could do something with nuclear power plants and how we use those to create electrical energy for our phones, houses etc?
Which does not show earths past environment?
Please hurry I need this :((
In a covalent bond:
A. None of these.
B. One atom accepts electrons from another.
C. The atoms attract each other but their electrons do not interact.
D. Both atoms share their electrons.
Answer:
D. Both atoms share their electrons.
Explanation:
Sea water contains 2% salt (NaCl) by weight. Given that water has a
density of 1g/mL. Determine the concentration of salt in:
(a) mg/L , (b) ppm.
Answer:
a) Concentration of salt in mg/L = 2g/100mL
b) concentration in ppm = 20000 ppm
Explanation:
Percentage composition of salt by weight in water = 2%
Density of water = 1 g/mL
100 mL of water will has a mass of 100 g
Mass of salt in 100 g of water = 2% ×100 g = 2 g
Therefore, 2 g of salt is dissolved in 100 mL of solution
Concentration of salt in 100 mL of solution = 2g/100mL
a) Concentration in mg/L
Mass of salt = 2 g = 2000 mg
Volume of solution = 100 mL = 0.1 L
Concentration in mg/L = 2000 mg/0.1 L
Concentration in mg/L = 20000 mg/L
b) Concentration in ppm
1 ppm = 1mg/L
Therefore, concentration in ppm = 20000 ppm
A 334 mL sample of hydrogen was collected over water at 23C on day when the atmospheric pressure was 756 mm Hg.The vapor pressure of water under these conditions is 17.54 mm Hg. What volume, in liters, will the dry hydrogen ( No water vapor) occupy at STP?
Answer:
0.299 L
Explanation:
We'll begin by calculating the pressure of dry gas. This can be obtained as follow:
Measured pressure = 756 mm Hg
Water vapor pressure = 17.54 mm Hg
Pressure of dry gas =?
Pressure of dry gas = (Measured pressure) – (Water vapor pressure)
Pressure of dry gas = 738.46 mmHg
Finally, we shall determine the volume occupied at STP. This can be obtained as follow:
Initial volume (V₁) = 334 mL = 334 / 1000 = 0.334 L
Initial pressure (P₁) = 738.46 mmHg
Initial temperature (T₁) = 23 °C = 23 °C + 273 = 296 K
Final pressure (P₂) = 760 mmHg
Final temperature (T₂) = 273 K
Final volume (V₂)
P₁V₁/T₁ = P₂V₂/T₂
738.46 × 0.334 / 296 = 760 × V₂/273
Cross multiply
296 × 760 × V₂ = 738.46 × 0.334 × 273
224960 × V₂ = 67334.2597
Divide both side by 224960
V₂ = 67334.2597 / 224960
V₂ = 0.299 L
Thus, the volume of the dry gas st STP is 0.299 L.
Gases Test
Chemistry
Answer:
6.64 l is the answer.......
Calculate the volume occupied by 2.00 moles of H₂ at 300.0 K and 1.25 atm
Answer:
V = 39.38 L
Explanation:
Given that,
No. of moles of H₂, n = 2
Temperature, T = 300 K
Pressure, P = 1.25 atm
We need to find the volume occupied by the gas. We can use the ideal gas law to find it such that,
[tex]PV=nRT[/tex]
Where
R is gas constant, R = 0.08205 L-atm/mol-K
V is volume of the gas
Rearranging the above formula for V. So,
[tex]V=\dfrac{nRT}{P}\\\\V=\dfrac{2\times 0.08205\times 300}{1.25}\\\\V=39.38\ L[/tex]
So, the volume occupied by the gas is 39.38 L.
How has the atom changed since Rutherford’s Early Atomic Model?
Answer:
the atom has changed in many ways, we have found sizes, masses, electrons, neutrons, and more.
Explanation:
Variables – this experiment tests how the temperature of water affects the time it takes for antacid tablets to dissolve. (they drop an antacid in hot water and one in cold water)
• What is the independent variable? (2 points)
• What is the dependent variable? (2 points)
Explanation:
You can think of independent and dependent variables in terms of cause and effect: an independent variable is the variable you think is the cause, while a dependent variable is the effect. In an experiment, you manipulate the independent variable and measure the outcome in the dependent variable.
Which of the following best defines base isolation?(1 point)
Base isolation is a technique used by engineers to help prevent damage to buildings by volcanoes. The main structure of the building is separate from the base, which allows lava to pass under the building without causing much damage.
Base isolation is a technique used to prevent large-scale damage from volcanoes. New communities being built are set as far back as possible from the base of a volcano.
Base isolation is a technique used to prevent damage to buildings during tsunamis. The main structure of the building is separate from the base, which allows water to pass beneath buildings without causing much damage.
Base isolation is a technique used by engineers to help prevent damage to buildings by earthquakes. The main structure of the building is separate from the base and sits on a bed of springs.
Base isolation is a technique used by engineers to help prevent damage to buildings by earthquakes. The main structure of the building is separate from the base and sits on a bed of springs.
What is base isolation?Base isolation is a technique developed to prevent or minimise damage to buildings during an earthquake.
A base isolation system is a method of seismic protection where the structure (superstructure) is separated from the base (foundation or substructure). By separating the structure from its base the amount of energy that is transferred to the superstructure during an earthquake is reduced significantly.
Hence, option D is correct.
Learn more about base isolation here:
https://brainly.com/question/11337994
#SPJ2
What is the answer for 250 K = ? °C
Answer:
This is your answer ☺️☺️☺️
Answer:
-23.15
Explanation:
A solid has a fixed ___________________ and a fixed ____________
Answer:
Shape and volume
hope this helps
have a good day :)
Explanation:
CAn someone help me with this?
Answer:
I think D. sorry if I'm wrong:)
A tower built of Iron is 500 meter tall. What is the change in height (m) if it is exposed to 25 0 Celsius during summer and at 1.00 Celsius during winter. α iron = 1.2 x 10-5/ Celsius
Answer:
-0.144 m
Explanation:
From the question,
α = Δh/(h₁Δt).................... Equation 1
Where α = coefficient of linear expansivity of iron, Δh = change in height, h₁ = initial height, Δt = change in temperature.
make Δh the subject of the equation
Δh = α(h₁Δt)..................... Equation 2
Given: α = 1.2×10⁻⁵/°C, h₁ = 500 m,
Δt = (t₂-t₁) Where t₂ and t₁ = Final and initial temperature respectively.
Δt = (1-25) = -24 °C
Substitute these values into equation 2
Δh = 1.2×10⁻⁵[500×(-24)]
Δh = 1.2×10⁻⁵(-12000)
Δh = -0.144 m
someone help ,, I'll give brainliest lolll .
Answer:
#2
Explanation:
Corrosion is a natural process that converts a refined metal into a more chemically stable form . It is the gradual destruction of materials by chemical
what is the name of the part of a cell that allows molecules in in, such as glucose and oxygen?
Answer:
A plasma membrane is permeable to specific molecules that a cell needs. Transport proteins in the cell membrane allow for selective passage of specific molecules from the external environment. Each transport protein is specific to a certian molecule (indicated by matching colors).
3 – Simple Diffusion Across the Cell (Plasma) Membrane: The structure of the lipid bilayer allows small, uncharged substances such as oxygen and carbon dioxide, and hydrophobic molecules such as lipids, to pass through the cell membrane, down their concentration gradient, by simple diffusion.
Or Cell Membrane
Explanation:
Hope This HElp??
Please MArk Me Brainly!!
Describe the effect of resonance on the amount of rotation that can occur in the main chain of your tripeptide (phenylalanine, alanine, and tyrosine), which affects protein folding.
Answer:
use research.
Explanation:
In an isolated system, mass can neither be
created or destroyed.
ube
FALSE
TRUE
Answer:
True
Explanation:
The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.
Hope it helps
Matching
Enter the letter of the box whose contents best match the description.
8
8
8
a
b
с
e
f
v a mixture of molecules
atoms of a pure elementa metal
molecules of an element
va solid compound
a mixture of elements
a. box a
b. box e
c. box b
d. box f
e. box d
f. box c
QUESTION 10
Answer:
a mixture of molecules - Box f
atoms of a pure elementa metal - Box D
a solid compound - Box C
a mixture of elements - Box A
Explanation:
Box a has mixture of elements which forms a solid like shape but there are different elements present in the box. The box f has mixture of molecules in which many atoms are combined together. Box c has solid compound with single element.
If a cluster of stars is all the same color, what could that mean?
Answer:
Cluster HR Diagrams: Since all the stars in a cluster formed at the same time, they are all the same age. A very young cluster will have a HR diagram with a cluster of T-Tauri stars evolving towards the main sequence. ... Each star is plotted by its color and magnitude on the HR diagram.
Why are fossil fuels considered to be a nonrenewable resources? Please help
Answer:
They're considered nonrenewable because they take millions of years to develop. They can't be renewed as fast as we're taking them.
please help me with n5 ty
and don’t waste my time if you don’t know the answer please
Thanks:)