Answer:
A
Explanation:
Steam enters a turbine operating at steady state with a specific enthalpy of 1407.6 Btu/lb and expands to the turbine exit where the specific enthalpy is 1236.4 Btu/lb. The mass flow rate is 5 lb/s. During this process, heat transfer to the surroundings occurs at a rate of 40 Btu/s. Neglecting kinetic and potential energy effects, the power developed by the turbine is
Answer:
The power developed by the turbine is 816 BTU per second.
Explanation:
Thermodynamically speaking, a turbine produces work at the expense of fluid energy. By First Law of Thermodynamics, the energy balance of a turbine working at steady state is:
[tex]-\dot Q -\dot W +\dot m\cdot (h_{in}-h_{out}) = 0[/tex] (1)
Where:
[tex]\dot Q[/tex] - Heat transfer rate, measured in BTU per second.
[tex]\dot W[/tex] - Power developed by the turbine, measured in BTU per second.
[tex]\dot m[/tex] - Mass flow rate, measured in pounds per second.
[tex]h_{in}[/tex], [tex]h_{out}[/tex] - Specific enthalpies at inlet and outlet, measured in BTU per pound.
If we know that [tex]\dot Q = 40\,\frac{BTU}{s}[/tex], [tex]\dot m = 5\,\frac{lbm}{s}[/tex], [tex]h_{in} = 1407.6\,\frac{BTU}{lbm}[/tex] and [tex]h_{out} = 1236.4\,\frac{BTU}{lbm}[/tex], then the power developed by the turbine is:
[tex]\dot W = -\dot Q + \dot m \cdot (h_{in}-h_{out})[/tex]
[tex]\dot W = 816\,\frac{BTU}{s}[/tex]
The power developed by the turbine is 816 BTU per second.
Does anyone know the answer to this ??? It’s 16 points
how many different words can be created by arranging the letters in SELFIESTICK?
Answer:
FLIES is one of them. ELF, TICK, SICK, LICK, SELF, prolly more but I'm to lazy to find them.
A(n) ______ is a rod with a kink in it that is turned by pistons.
Please I need help with this
Photosynthesis energy is stored in the cells of green plants through
process called ______?
In order to cool a cylindrical steel rod of diameter D, length L and uniform temperature T1, it is placed in a well-mixed water bath at initial temperature T0 and volume V0. The heat transfer coefficient between the steel rod surface and the water is h1. Assume the specific heat, density and conductivity of the steel rod and water are known and constant. Write down heat transfer differential V1, P1, T1 equation and boundary and initial conditions for temperature distribution in both steel rod and water bath
Answer:
attached below
Explanation:
Cylindrical steel rod : diameter ( D ) , length L, uniform temperature T
Initial temp of water : To, heat transfer coefficient between steel rod surface and water : h1
The energy balance equation can be written as :
Rate of convectional heat loss = Rate of decrease in internal energy with respect to time
cp = heat capacity of body, v = volume , р = density of body
attached below is the heat transfer differential equation and boundary and initial conditions
What’s cat plus cat
?
g ) Water is the working fluid in an ideal regenerative Rankine cycle with one closed feedwater heater. Superheated vapor enters the turbine at 16 MPa, 560 oC, and the condenser pressure is 8 kPa. The cycle has a closed feedwater heater using extracted steam at 1 MPa. Condensate drains from the feedwater heater as saturated liquid at 1 MPa and is trapped into the condenser. The feedwater leaves the heater at 16 MPa and a temperature equal to the saturation temperature at 1 MPa. The mass flow rate of steam entering the first-stage turbine is 120 kg/s. Determine (a) the net power developed, in kW.
Answer:
146494 kw
Explanation:
Given data:
Turbine inlet pressure ( p1 ) = 16 MPa
Turbine inlet temperature ( T1 ) = 560°C
condenser pressure : P3 = 8Kpa
Extracted steam at pressure ( P2 ) = 1 MPa
mass flow rate of steam ( m ) = 120 kg/s
a) The net power developed
= 146494 kw
note: values of h1, h2, y, Wp are all calculated values not included in the solution to make the solution less cumbersome.
We have a parallel-plate capacitor with plates of metal each having a width W and a length L. The plates are separated by the distance d. Assume that L and W are both much larger than d. The maximum voltage that can be applied is limited to V max =K d, in which K is called the breakdown strength of the dielectric. Derive an expression for the maximum energy that can be stored in the capacitor in terms of K and the volume of the dielectric. If we want to store the maximum energy per unit volume, does it matter what values are chosen for L, W, and d? What parameters are important?
Answer:
max energy = [tex]W_{max} = \frac{1}{2}[/tex]*εo*εr*k^2
Explanation:
Given data:
weight of plates = W
length of plates = L
distance of separation = d
max voltage ( Vmax ) = Kd
Area ( A ) = WL
The values chosen for L, W, and d matters, although the maximum energy stored in the capacitor is independent of L, W, and d. but at a constant volume and a larger value for W and L which is > d, the value of the dielectric (εrK^2 ) should be a larger value '
The important parameters are : εrK^2 , k , d and Area
attached below is the remaining part of the solution
Can someone help me plz!!
2.3
What does NBT stand for?
Answer:
Named Binary Tag ( NBT)
Explanation:
The format is designed to store data in a tree structure made up of various tags
The meaning of the given word NBT is called; National Benchmark Test.
What is the meaning of NBT?The meaning of the given word NBT is called National Benchmark Test.
NBT ( national benchmark test ) is defined as a national test which must be written and passed by High school students that intend to go to the university ( i.e. passport to the university ).
Read more about NBT at; https://brainly.com/question/26887507
stole energy is also called
Answer:
Hey mate....
Explanation:
This is ur answer.....
Energy theft, also called energy diversion, occurs when individuals tamper with electric meters or electric power lines. Energy theft ranges from tapping into a neighbor's energy source to illegally adjusting a meter. Meter tampering occurs in homes, grocery stores, restaurants and other commercial establishments.
Hope it helps you,
mark me as the brainliest....
Follow me! :)
What motion involves a shaft that can easily grip hair and
clothing?
Answer: B) Rotating
Explanation: Osha 10 Career safe
Consider a layer of insulation installed around a steam pipe. The radius of the pipe is R1 and the thickness of the insulation is R3-R1.The stream is maintained at a temperature TW and the air surrounding the insulation is at a temperature To and flows cross wise over the pipe. The air is flowed over the steam pipe at high enough velocity so a thermal boundary layer develops over the surface described by a heat transfer coefficient h.
Required:
Beginning with the heat equation, calculate the total quantity of heat being conducted per unit time (heat flow) through the insulation, Q (units: energy/time).
Answer:
hmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
........
Applying fatigue failure criteria in 3D, determine the final relation (equation) for the following cases: - Considering only the internal pressure fluctuating from Pmax to Pmin Numerical Application: Pmax=1.0P and Pmin=0.2P σu= 690 MPa σe= 345 MPa Kf=1 ; Define P ? - Considering completely reversed internal pressure (P) and completely reversed bending moment (M) Write just the final equation (no numerical application)
Answer:
Hello your question is incomplete attached below is the complete question
answer :
I) P = t/R * 492.85
II) The final equation : PR / t + 4M/πR3 = б e
Explanation:
attached below is a detailed solution to the given problem
i) P = t/R * 492.85
ii) Final equation : PR / t + 4M/πR3 = б e
PLZ HELP I GIVE BRAINLIEST!!
Question text
A man leaves home for a cycle ride and comes back home after a half-an-hour ride covering a distance of one km. What is the average velocity of the ride?
Answer: Hello, The average velocity of the ride is 0 km/h. Your Welcome! Mark me as Brainliest!
Explanation: