Answer:
1. $25,500
2. $50,000
Explanation:
Company will earn zero economic profit if the price is $25,500
Insurance price = (50% x $50,000) + (50% x $ 1,000)
Insurance price = $25,000 + $500
Insurance price = $25,500
If the careful doctors are not willing to pay more than $5,000 for insurance then I am afraid reckless doctors will take the insurance with price of $50,000
Eberley Corporation's cost formula for its manufacturing overhead is $25,700 per month plus $10 per machine-hour. For the month of July, the company planned for activity of 5,900 machine-hours, but the actual level of activity was 5,920 machine-hours. The actual manufacturing overhead for the month was $86,800. The manufacturing overhead in the planning budget for July would be closest to:
Answer:
$84,700
Explanation:
The computation of manufacturing overhead in the planning budget for July is shown below:-
Manufacturing overhead in the planning budget = Manufacturing overhead per month + Budgeted hours × Budgeted rate
= $25,700 + 5,900 × $10
= $25,700 + $59,000
= $84,700
Therefore for computing the manufacturing overhead in the planning budget for July we simply applied the above formula.
Sue and Andrew form SA general partnership. Each person receives an equal interest in the newly created partnership. Sue contributes $18,000 of cash and land with an FMV of $63,000. Her basis in the land is $28,000. Andrew contributes equipment with an FMV of $20,000 and a building with an FMV of $41,000. His basis in the equipment is $16,000, and his basis in the building is $28,000. How much gain must the SA general partnership recognize on the transfer of these assets from Sue and Andrew
Answer:
$0
Explanation:
Given that
Sue contributed amount = $18,000
FMV of land = $63,000
Basis in land = $28,000
Andrew contributed amount = $20,000
FMV of Building = $41,000
Basis in equipment = $16,000
Basis in building = $28,000
Based on the above information, the gain that would be recognized is $0 as Partnerships recognize no gain on receiving contributed valued property. At the disposal of the asset, the constructed-in benefit or constructed-in loss will be revealed. For this, the partnership basis property i.e being acquired should be based on a carryover basis.
Jaxon Furnishings Company is considering logging opportunities in Alaska to obtain wood for their products. The market analysis team is busy comparing the benefits of increased wood production to the costs of deforestation and resulting environmental conditions. The company is using the _____ approach to make this ethical decision.
Answer:
Jaxon Furnishings Company Vs Logging Opportunities in Alaska
Comparison of the benefits of increased wood production to the costs of deforestation:
The company is using the __environmental sustainability___ approach to make this ethical decision.
Explanation:
According to brittanica.com, environmental "sustainability is understood as a form of intergenerational ethics in which the environmental and economic actions taken by present persons do not diminish the opportunities of future persons to enjoy similar levels of wealth, utility, or welfare."
An approach to an ethical decision is sustainable when it considers the long-term benefits and costs associated with the decision, instead of concentrating on the short-term benefits as some business transactions are done. Short-termism selfishly considers the immediate gains from a transaction. It lacks a futuristic appetite for the good of future generations.
A truck was purchased 3 years ago for $50,000 and can be sold today for $25,000. The operating costs are $9,000 per year, and it is expected to last 4 more years with a $5,000 salvage value. A new truck, which will perform that same service, can be purchased for $55,000, and it will have a life of 10 years with operating costs of $28,000 per year and a $10,000 salvage value. What is the value that should be used as P for the presently owned vehicle in a replacement study
Answer:
P = $25,000
Explanation:
Cost price of truck = $50,000
Present value = $25,000
Operating costs = $9,000 per year
Salvage value = $4,000
Find remaining amount for old truck:
Amount remaining = $50,000 - $25,000 = $25,000
Total amount, since it has a salvage value of $5,000:
Total = $25,00 + $5,000 = $30,000
For new truck:
Cost price = $55,000
Operating costs = $28,000 per year
Salvage value = $10,000
To find the value that should be used as P for the presently owned vehicle in a replacement study:
P = Cost of new truck - Total amount remaining from old truck
P = $55,000 - $30,000
P = $25,000
Therefore, the value that should be used as P for the presently owned vehicle in a replacement study is $25,000
The following data were taken from the records of Clarkson Company for the fiscal year ended June 30, 2017.Raw Materials Inventory 7/1/16 $51,100Factory Insurance $4,700Raw Materials Inventory 6/30/17 46,000Factory Machinery Depreciation 19,000Finished Goods Inventory 7/1/16 98,200Factory Utilities 29,100Finished Goods Inventory 6/30/17 26,100Office Utilities Expense 9,350Work in Process Inventory 7/1/16 26,800Sales Revenue 564,000Work in Process Inventory 6/30/17 22,300Sales Discounts 4,700Direct Labor 147,750Plant Manager’s Salary 65,600Indirect Labor 26,560Factory Property Taxes 9,810Accounts Receivable 27,100Factory Repairs 1,600Raw Materials Purchases 97,500Cash 35,600A) Prepare a cost of goods manufactured schedule (Assume all raw materials used were direct materials).B) Prepare an income statement through gross profitC) Prepare the current assets section of the balance sheet at June 30,2017
Answer:
A) cost of goods manufactured schedule
Factory Insurance 4,700
Factory Utilities 29,100
Factory Machinery Depreciation 19,000
Direct Labor 147,750
Plant Manager`s Salary 65,600
Indirect Labor 26,560
Factory Property Taxes 9,810
Factory Repairs 1,600
Add Beginning Work in Process Inventory 26,800
Less Closing Work in Process Inventory (22,300)
Cost of Goods Manufactured $308,620
B) income statement through gross profit
Sales Revenue 564,000
Less Sales Discounts (4,700)
Net Sales 559,300
Less Cost of Goods Sold :
Finished Goods Inventory 98,200
Add Cost of Goods Manufactured 308,620
Less Closing Finished Goods Inventory (26,100) (380,720)
Gross Profit 178,580
C) current assets section of the balance sheet at June 30,2017
Current Assets
Raw Materials Inventory 46,000
Work in Process Inventory 22,300
Finished Goods Inventory 26,100
Accounts Receivable 27,100
Cash 35,600
Total Current Assets 157,100
Explanation:
Raw Materials Consumed in Production Calculation
Open a Raw Materials T - Account as follows :
Debit :
Opening Balance $51,100
Purchases $97,500
Totals $148,600
Credit :
Closing Balance $46,000
Requisitioned for Production (Balancing figure) $102,600
Totals $148,600
The following information is available for a company's maintenance cost over the last seven months.
Month Maintenance Hours Maintenance Cost
June 9 $5,200
July 18 $6,650
August 12 4,850
September 15 5,750
October 21 6,650
November 24 6,950
December 6 3,350
Using the high-low method, estimate both the fixed and variable components of its maintenance cost.
High-Low method Calculation of variable cost per unit
Total cost at the high point ____
Variable costs at the high point
Volume at the high point: ____
Variable cost per unit ____
Total variable costs at the high point ____
Total fixed costs ____
Total cost at the low point ____
Variable costs at the low point
Volume at the low point ____
Variable cost per unit
Total variable costs at the low point
Total fixed costs ____
Answer:
Variable cost per unit= $240
Fixed costs= $1,910
Explanation:
Giving the following information:
June 9 $5,200
July 18 $6,650
August 12 4,850
September 15 5,750
October 21 6,650
November 24 6,950
December 6 3,350
To calculate the variable and fixed costs under the high-low method, we need to use the following formulas:
Variable cost per unit= (Highest activity cost - Lowest activity cost)/ (Highest activity units - Lowest activity units)
Variable cost per unit= (6,950 - 3,350) / (21 - 6)
Variable cost per unit= $240
Fixed costs= Highest activity cost - (Variable cost per unit * HAU)
Fixed costs= 6,950 - (240*21)
Fixed costs= $1,910
Fixed costs= LAC - (Variable cost per unit* LAU)
Fixed costs= 3,350 - (240*6)
Fixed costs= $1,910
QUESTION 12 For a strategic alliance, firms should seek partners that are: a. known for being opportunistic. b. radically different when it comes to strategic goals. c. willing to share costs and risks of new-product development. d. different in terms of vision and agendas. e. similar when it comes to capabilities.
Answer:
c. willing to share costs and risks of new-product development.
Explanation:
A strategic alliance is when two companies come together to carry out a project that benefits both companies while both companies still retain their independence.
If strategic alliance is carried out with a company that is opportunistic, the company might take advantage of the other company or take certain actions that would not benefit the other company.
strategic alliance has to be mutually beneficial to both companies, so, strategic goals and visions have to align.
Capabilities don't have to be the same for a strategic alliance.
I hope my answer helps you
Which of the following is used to manage employee performance and to align all employees with the key objectives a firm needs to achieve its strategic goals? Group of answer choices functional planning system annual HR benchmarks high performance work system HR Scorecard
Answer:
HR scorecard
Explanation:
This is all done within a company using an HR scorecard. HR scorecards are used by the human resources department in order to manage individual employee performance as well as making sure all the employees are aligned with the firm's current objective and strategic goals. These scorecards give managers the ability to assign financial and non-financial goals, monitor and assess performances, and even make necessary changes both quickly and effectively.
The effect is A. more likely if inflation is unanticipated because workers would not seek higher nominal wages. B. more likely if inflation is unanticipated because workers would seek higher nominal wages. C. less likely if inflation is unanticipated because workers would not seek higher nominal wages. D. less likely if inflation is unanticipated because workers would seek higher nominal wages.
Answer:
more likely if inflation is unanticipated because workers would not seek higher nominal wages.
Explanation:
Here is the full question:
The effect of the sudden unanticipated spurt of inflation:
A. less likely if inflation is unanticipated because workers would not seek higher nominal wages.
B. less likely if inflation is unanticipated because workers would seek higher nominal wages.
C. more likely if inflation is unanticipated because workers would seek higher nominal wages.
D. more likely if inflation is unanticipated because workers would not seek higher nominal wages.
Inflation is a presistent rise in general price level.
Workers compensate for expected inflation by asking for an increase in nominal wages.
Nominal wages = real wages + inflation
If there's an unanticipated rise in inflation, workers would be at a disadvantage because their wages would most likely not reflect this unexpected rise in inflation.
I hope my answer helps you
Answer: A. more likely if inflation is unanticipated because workers would not seek higher nominal wages.
Explanation:
An Unanticipated Spurt in Inflation could lead to rapid Economic growth and this effect is more likely if it was unanticipated because workers would not seek higher nominal wages.
This is because if the workers do not expect prices to rise and hence do not negotiate better wages, the cost of Production for producers will remain the same even though profitability has increased due to the higher prices.
The producers will therefore produce more goods to take advantage of the situation which will further aid Economic growth.
Which of the following could be considered a cost driver? Select one: a. A service provided by an architecture firm b. A product produced by a manufacturer c. A tax return prepared by a local CPA firm d. All of the above
Answer: d. All of the above
Explanation:
A cost driver refers to the activity that causes an actual change in the cost of a transaction and by extension it's local cost.
For example, cost driver of labor would be the number of people working or cost driver of Electricity paid would be the actual number of units consumed.
In the above, the products and services mentioned are the integral activities for those firms so they are cost drivers to those firms.
Alpha and Beta are partners who share income in the ratio of 1:2 and have capital balances of $42,600 and $88,200, respectively, at the time they decide to terminate the partnership. After all noncash assets are sold and all liabilities are paid, there is a cash balance of $77,700. What amount of loss on realization should be allocated to Alpha
Answer:
The amount of loss to Alpha is $17700.
Explanation:
Given income sharing ratio = 1:2
The capital balance of Alpha = $42600
The capital balance of Beta = $88200
Total capital balance (Alpha + Beta) [tex]= $42600 + $88200 = $130800[/tex]
The cash balance available = $77700
Loss = 130800 – 77700 = $ 53100
The share of loss allocated to Alpha:
[tex]= 53100 \times \frac{1}{3} \\= $17700[/tex]
Therefore, the amount of loss to Alpha is $17700.
The supplies account has a balance of $1,200 at the beginning of the year and was debited during the year for $2,300, representing the total of supplies purchased during the year. If $650 of supplies are on hand at the end of the year, the supplies expense to be reported on the income statement for the year is Group of answer choices
Answer:
Supplies expense to be recorded = $2,850
Explanation:
Beginning account balance = $1,200
debit during the year = $2,300. This means that a transaction of $2,300 was used for supply purchase during the year
balance on hand = $650
difference between beginning and ending inventory = 1200 - 650 = $550
This means that an expense of $550 was carried out during the year.
Therefore, total expense during year = 550 + purchase expense
= 550 + 2300 = $2,580
Alternatively, the supply expense reported can be calculated with the formula:
Supplies expense = beginning inventory + supplies purchased - ending inventory
Supplies expense = 1200 + 2300 - 650 = $2,850
Based on the supplies opening balance, the supplies purchased and other details, the supplies expense must be $2,850
The supplies expense can be calculated as:
= Beginning balance + Supplies purchased - Closing balance
Solving would give:
= 1,200 + 2,300 - 650
= $2,850
In conclusion, the supplies expense in the income statement will be $2,850
Find out more at https://brainly.com/question/14313516.
Your friend, Jonathon Fain, is an engineering major with an entrepreneurial spirit. He wants to start his own corporation and needs your accounting expertise. He has no idea what the following definitions mean:
1. Authorized stock.
2. Issued stock.
3. Outstanding stock.
4. Preferred stock.
5. Treasury stock.
Required:
Write a note to Jonathon carefully explaining what each term means and how they are different from each other.
Answer:
Please find the detailed explanation below.
Explanation:
1. Authorized stock:
This is the total(maximum) number of shares a corporation can issue. This can be found in its articles of incorporation or memorandum of association.
2. Issued stock:. This is the summation of all company's shares that have been sold and are held by shareholders.
3. Outstanding stock:
Outstanding stock or shares are all shares of a corporation that have been authorized, issued and purchased by shareholders and are held by them.
4. Preferred stock:
This share is an hybrid stock i.e it has a feature of both the equity and debt in it. Holders of this shares are entitled to fixed dividend payment and are usually paid before common shareholders if the company liquidates.
5. Treasury stock.:
Treasury shares are the shares that are repurchased by the corporation issuing them and thereby, reducing the total number of outstanding shares.
An uninterruptible power system used in a small production facility at Acme Manufacturing has a basis of $56,000 and is expected to have $5750 salvage value after 125,000 hours of use. Calculate the depreciation rate per hour of use and the book value after 77,000 hours of operation.
Answer:
The depreciation rate per hour is 0.402
The Book value is $25,046
Explanation:
In order to calculate the depreciation rate per hour of use we would have to calculate the following:
depreciation rate per hour=(basis- salvage value)/hours of use
depreciation rate per hour=($56,000-$5750)/125,000
depreciation rate per hour=0.402
To calculate the book value we would have to make the following calculation:
Book value=basis-(depreciation rate per hour*77,000 hours of operation)
Book value=$56,000-(0.402*77,000)
Book value=$25,046
On January 1, ABC sold $30,000 in products to a customer on account. Then on January 10, ABC collected the cash on that account. What is the impact on ABC's accounting equation from the collection of cash on January 10?
Answer:
Collection of Cash on January 10
The Impact on ABC's accounting equation:
The Assets (Cash) will increase by $30,000 and another type of Assets (Accounts Receivable) will decrease by $30,000.
The collection of cash on January 10 does not affect the other side of the accounting equation.
Explanation:
The accounting equation shows that for every transaction, the Assets will be equal to the Liabilities + Owners' Equity. The explanation is that the financial resources which an entity owns actually belong to either creditors or equity owners in the form of financial obligations (liabilities) or contributed capital plus some parts of the net income over the years which the entity has reinvested in its business.
The accounting equation is the fulcrum of the double-entry accounting system. On a company's balance sheet, the accounting equation shows that assets equal the sum of the company's liabilities and shareholders' equity.
Assume that you have a company that assembles final products from a large variety of components that are supplied by factories located in various parts of the world. In the past you have experienced disruptions in the flow of your supply of components as the result of bad weather, such as a strong El Niño phenomenon, as well as other uncontrollable events. You have back-up suppliers, but each have different capacities and delivery schedules. So you created a model that includes sets of assumptions about changes in suppliers and delivery times in the event of unusual disruptive events. The Excel tool specifically designed for your use in this case is:________
Answer:
Sensitivity analysis
Explanation:
The excel tool that is fit for this task is a sensitivity analysis
Sensitivity analysis is a financial modelling tool that illustrates how a set of input variables impacts the dependent output variable under a certain specific condition , useful for making predictions concerning a range of variables.
It helps in identifying key variables that are of high influence on a project to facilitate a more precise forecasting , and also to help in ranking projects.
Other key benefits are that it considers the time value of money and cash flow.
Agent Jennings makes a presentation on Medicare advertised as an educational event. Agent Jennings distributes materials that are solely educational in nature. However, she gives a brief presentation that mentions plan-specific premiums. Is this a prohibited activity at an event that has been advertised as educational?
Answer:
Yes it is
Explanation:
Yes. When an event has been advertised as educational, going ahead to discuss plan-specific premiums is impermissible
The event for which Mary made the presentation is clearly an educational event so she should have concentrated fully on only educational contents that pertains to the event. Giving a presentation that mentions plan-specific premiums no matter how brief is a deviation from the main focus of the event. Therefore it is impermissible for her to do so.
Nuzum Corporation has two divisions: Division M and Division N. Data from the most recent month appear below: Total Company Division M Division N Sales $557,000 $254,000 $303,000 Variable expenses 144,910 81,280 63,630 Contribution margin 412,090 172,720 239,370 Traceable fixed expenses 273,000 128,000 145,000 Segment margin 139,090 44,720 94,370 Common fixed expenses 94,690 43,180 51,510 Net operating income $ 44,400 $ 1,540 $ 42,860 Management has allocated common fixed expenses to the Divisions based on their sales. The break-even in sales dollars for Division N is closest to:
Answer:
$ 183,544.30 = $ 183,544
Explanation:
Nuzum Corporation
Total Division M Division N
Sales $557,000 $254,000 $303,000
Variable expenses 144,910 81,280 63,630
Contribution margin 412,090 172,720 239,370
Traceable fixed expenses 273,000 128,000 145,000
Segment margin 139,090 44,720 94,370
Common fixed expenses 94,690 43,180 51,510
Net operating income $ 44,400 $ 1,540 $ 42,860
First we find the Segment CM ratio by the following formula:
Segment Contribution Margin Ratio= Segment Sales- Segment Variable Expenses/ Sales
Segment Contribution Margin Ratio= 303,000 -63630/303000
Segment Contribution Margin Ratio= 239370/303000=0.79
Then we find the break even sales in dollars.
Break Even Sales in Dollars= Traceable Fixed Expense/ Segment Contribution Margin Ratio
Break Even Sales in Dollars =145,000/0.79= $ 183,544.303
Consider two ways of commuting in a crowded city: taking public transportation, such as subway and buses, or driving your own car.
A person who chooses to take public transportation in a crowded city imposes a NEGATIVE OR POSITIVE externality on drivers. A policy implication of this result is a SUBSIDY FOR OR TAX ON those who take public transportation.
Persons who choose to drive their own cars to get around in a crowded city impose a NEGATIVE OR POSITIVE externality on other drivers. A policy implication of this result is a TAX ON OR SUBSIDY FOR those who drive their own cars.
Answer: positive; subsidy for; negative; tax on.
Explanation:
A positive externality occurs when the activities of an economic agent is of benefit to another third party that is not part of the activity or transaction while negative externality is the cost an individual bears due to the market activities of another individual or firm. It should be noted that the third parties didn't plan to incur the costs or benefits mentioned above.
Therefore, an individual who chooses to take public transportation in a crowded city imposes a positive externality on drivers. We are told that the city is overcrowded, therefore using public transportation means there will be lesser vehicles on the road and this will be beneficial to the drivers and there may be subsidy for those who take public transportation.
The people who choose to drive their own cars to get around in a crowded city impose a negative externality because there will be traffic congestion and health hazards and a tax can be imposed on them.
Kenzi kayaking a manufacturer of kayaks began operations this year. During this first year the company produced 1075 kayaks and sold 825 at a price of $1075 each. At this first year-end, the company reported the following income statement information using absorption costing.
Sales (825x $1,075) Cost of goods sold (825x $475) Gross margin Selling and administrative expenses Net income
$886,875 391,875 495,000 210,000 $285,000
Additional Information:
a. Product cost per kayak totals $500, which consists of $400 in variable cost production cost and $100 in fixed production cost- the latter amount is based on 107500 of fixed production cost allocated to the 1075 kayaks produced.
b. The $210,000 in selling and administrative expense consists of $75,000 that is variable and $135,000 that is fixed.
Required:
Prepare an income statement for the current year under variable costing.
Answer:
Income Statement for the Current Year under Variable Costing
Sales (825 × $1,075) $886,875
Less Cost of Sales
Opening Stock $0
Add Cost of Goods Manufactured ( 1075 × $400) $430,000
Less Closing Inventory (250 × $400) ($100,000) ($330,000)
Contribution $556,875
Less Expenses :
Fixed Manufacturing Overheads ($107,500)
Selling and administrative expense : Variable ($75,000)
Selling and administrative expense : Fixed ($135,000)
Net Income / (Loss) $239,375
Explanation:
Under variable costing, only variable costs of production are included in cost of goods sold. Both the Non - Production and Fixed Production Costs are treated as Period Cost Expensed during the year.
You purchase one MMM July 129 call contract (equaling 100 shares) for a premium of $21. You hold the option until the expiration date, when MMM stock sells for $141 per share. You will realize a ______ on the investment.
Answer:
There is loss of $900 on investment.
Explanation:
The purchase of 1 MMM July 129 call contract at premium = $21
Since it is given that it is held unit the expiration date.
The selling price of MMM stock = $141 per share.
Total number of shares = 100
Total amount paid for share (purchase price) = 129 + 21 = $150
Loss or profit = Market price on expiration date- purchase price
=141-150
= - 9
Total loss = 9 × 100
=900 loss
On December 31, the end of the first year of operations, Frankenreiter Inc. manufactured 25,600 units and sold 24,000 units. The following income statement was prepared, based on the variable costing concept: Frankenreiter Inc. Variable Costing Income Statement For the Year Ended December 31, 20Y1 1 Sales $9,600,000.00 2 Variable cost of goods sold: 3 Variable cost of goods manufactured $5,376,000.00 4 Inventory, December 31 (336,000.00) 5 Total variable cost of goods sold 5,040,000.00 6 Manufacturing margin $4,560,000.00 7 Total variable selling and administrative expenses 1,150,000.00 8 Contribution margin $3,410,000.00 9 Fixed costs: 10 Fixed manufacturing costs $1,664,000.00 11 Fixed selling and administrative expenses 890,000.00 12 Total fixed costs 2,554,000.00 13 Income from operations $856,000.00 Determine the unit cost of goods manufactured, based on (a) the variable costing concept and (b) the absorption costing concept.
Answer:
Results are below.
Explanation:
Giving the following information:
Production= 25,600 units
Units sold= 24,000
Variable cost of goods sold= $5,376,000
Fixed manufacturing costs= $1,664,000
The absorption costing method includes all costs related to production, both fixed and variable. The unit product cost is calculated using direct material, direct labor, and total unitary manufacturing overhead.
The variable costing method incorporates all variable production costs (direct material, direct labor, and variable overhead).
Variable costing method:
Unitary product cost= 5,376,000/25,600= $210
Absorption costing:
Unitary product cost= 210 + (1,664,000/25,600)= $275
Assume that the cost of money is 10% per year. The initial cost of a small personal aircraft is $35,000, the annual repair and maintenance cost is $20,000 and the salvage value is $10,000. The aircraft is kept for 2 years. The present worth of the aircraft is :__________
Answer:
The present worth of aircraft = $29137.82
Explanation:
Given the cost of money (r ) = 10%
The initial cost of small aircraft = $35000
Annual repair and maintenance costs (A) = $20000
Salvage valaue = $10000
Now calculate the present value of aircraft by adding the initial cost of annual maintenance and salvage value and subtracting the initial cost.
[tex]Present worth = initial cost + \frac{A[1-(1+r)^{-n}]}{r} - \frac{Salvage \ value}{(1 + r)^{n}} \\= 35000 + \frac{20000 [1 – (1+ 0.01)^{-2}]}{0.01} - \frac{10000}{(1 + 0.01)^{2}} \\= $29137.82[/tex]
Tom Company incurs overhead costs each year in its three main departments, setup ($70,000), machining ($34,000), and packing ($56,000). Information about the company's two products is as follows:
Product A1 Product B1 Total
Number of setups 7 33 40
Machining hours 2,800 2,200 5,000
Orders packed 280 220 500
Number of products manufactured 560 440 1,000
If machining hours are used as a base under traditional costing, how much overhead is assigned to Product A1?
Answer:
Allocated MOH= $89,600
Explanation:
Giving the following information:
Tom Company incurs overhead costs each year in its three main departments, setup ($70,000), machining ($34,000), and packing ($56,000).
Product A1 Product B1 Total
Number of setups 7 33 40
Machining hours 2,800 2,200 5,000
Orders packed 280 220 500
Number of products manufactured 560 440 1,000
Under the traditional costing system, the company applies overhead based on a single plantwide predetermined overhead rate.
First, we need to calculate the predetermined overhead rate:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 160,000/ 5,000
Predetermined manufacturing overhead rate= $32 per machine hour
Now, we can apply overhead:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Allocated MOH= 32*2,800= $89,600
_____ do NOT have the authority to make decisions. a. Self-managing teams b. Semi-autonomous work groups c. Employee involvement teams d. Self-designing teams e. Autonomous work groups
Answer:
C. Employee involvement teams
Explanation:
Employee involvement teams do not have the authority to make decisions but They can offer advice and suggestions to management regarding particular issues.
Employee involvement teams has
employees directly involved in helping an organization achieve its vision and meet its objectives by offering their ideas, skills, support and efforts towards solving problems.
A pollution haven is A. unattractive for multinational investment because of the ambient pollution. B. a location with weak environmental rules that attracts manufacturing companies due to decreased costs. C. a place that has very low worker wages. D. a place where people actually like pollution and view it as a positive externality.
Answer:
B. a location with weak environmental rules that attracts manufacturing companies due to decreased costs.
Explanation:
A pollution haven is when companies establish factories or offices abroad in countries in which they have lower costs and have access to all the resources they need. Also, these locations tend to be in developing nations in which the environmental standards tend to be lower than the ones in developed nations. According to this, the answer is that a pollution haven is a location with weak environmental rules that attracts manufacturing companies due to decreased costs.
The other options are not right because a pollution haven is attractive for multinational investment because of the lower cost and it is not related to ambient pollution. Also, a pollution haven has low wages but it is not the only thing that defines it and it is not a place where people like pollution.
The independent cases are listed below that includes all items relevant to operating activities: Case A Case B Case C Sales revenue $ 65,000 $ 55,000 $ 96,000 Cost of goods sold 35,000 26,000 65,000 Depreciation expense 10,000 2,000 26,000 Salaries and wages expense 5,000 13,000 8,000 Net income (loss) 15,000 14,000 (3,000) Accounts receivable increase (decrease) (1,000) 4,000 3,000 Inventory increase (decrease) 2,000 0 (3,000) Accounts payable increase (decrease) 0 2,500 (1,000) Salaries and wages payable increase (decrease) 1,500 (2,000) 1,000 Compute cash flows from operating activities using the direct method. (Amounts to be deducted should be indicated with a minus sign.) Case A Case B Case C Cash Collected from Customers Cash Payments to Suppliers Cash Payments for Salaries and Wages Net Cash Provided by Operating Activities $ 0 $ 0 $ 0
Answer:
Case A Case B Case C
Cash Collected from Customers $66,000 $51,000 $93,000
Cash Payments to Suppliers ($37,000) ($23,500) ($63,000)
Cash Payments for Salaries and Wages ($3,500) ($15,000) ($7,000)
Net Cash Provided by Operating Activities $25,500 $12,500 $23,000
Explanation:
Case A Case B Case C
Sales revenue 65,000 55,000 96,000
Cost of goods sold 35,000 26,000 65,000
Depreciation expense 10,000 2,000 26,000
Salaries and wages expense 5,000 13,000 8,000
Net income (loss) 15,000 14,000 (3,000)
Accounts receivable increase (decrease) (1,000) 4,000 3,000
Inventory increase (decrease) 2,000 0 (3,000)
Accounts payable increase (decrease) 0 2,500 (1,000)
Salaries and wages payable increase
(decrease) 1,500 (2,000) 1,000
Cash Collected from Customers = Sales revenue - Accounts receivable increase (decrease)
Cash Payments to Suppliers = Cost of goods sold + Inventory increase (decrease) + Accounts payable increase (decrease)
Cash Payments for Salaries and Wages = Salaries and wages expense - Salaries and wages payable increase
(decrease)
Use the 2012 segment information provided by BMW and Volkswagen to an- swer the following questions: a. Which company is more multinational? b. Which company is more internationally diversified? c. In which region(s) of the world did each company experience the greatest growth from 2011–2012? the greatest decline?
Answer with its Explanation:
a). The total revenue of Volkswagen and BMW in the 2012 segment given shows that the revenue is $192,676 and BMW which is $76,848. As the revenue of Volkswagen is more than the BMW hence Volkswagen is more multinational.
b). The regional sales section shows that the Volkswagen is more internationally recognized as per the regional sales which is substantially higher than the regional sales of BMW. So its crystal clear that Volkswagen is the one which more internationally diversified.
c). The 2012 segment information shows that the BMW greatest growth was in China then in USA and then greatest growth was in Rest of the Europe and the greatest decline was in Rest of the America.
For Volkswagen, the greatest growth was in North America then in Asia and then in South America. The greatest decline wasn't seen in the segment information but lowest increase was seen in Germany and then in the European countries.
Kahn of Portland Oregon sent a letter to Lischner of Los Angeles inquiring whether Kushner’s property in Humboldt County was for sale. Lischner replied that he was interested in selling and asked Kahn about the fair market value. Kahn wrote that it was difficult to make an offer without a legal description of the property and asked for it and the annual taxes. These were provided by Lischner. Subsequently, Kahn wrote, "I hesitate to place a value on someone else’s property, but I can tell you that I have been offered a similar track of property for $2,000. Since your property is closer to mine, I would prefer to buy yours, and offer a four-year term contract at a total price of $2,500." The two parties ultimately agreed on a cash price of $2,500. Shortly after contracting with Kahn, Lischner went to Humboldt county and readily learned, upon the most superficial inquiry that the property was worth more than $2,500. He sold the property to Pacoima Lumber Sales, Inc. for $7,500. Thereupon, Kahn sued Lischner for $5,000. Lischner responded that he had been induced to contract by a fraudulent misrepresentation as to the value of the property by Kahn and therefore could rescind their contract of sale.What are the elements that must be present for fraudulent misrepresentation? Did Kahn commit fraud? Why, or why not.
Answer:
Misrepresentation & Fraud:
a) Elements for Fraudulent Misrepresentation:
1) A representation was in fact made: This means that it was not just a mere opinion expressed by the party misrepresenting.
2) That particular representation was false: The statement made was untrue.
3) The defendant had knowledge that the representation was false: The misrepresentation was intentional on the party of the defendant.
4) The statement was made with the intention that the other party rely on it and enter into a contract or agreement: The defendant was out to induce the other party to enter the contract.
b) Kahn committed a fraud since he intentionally induced Lischner to contract on the basis of fraudulent misrepresentation. The remedy available for Lischner is to rescind the contract.
Explanation:
a) Fraudulent misrepresentation is the presentation of false facts by someone who attempts to persuade another into action with the intent to deceive. The remedy available to the deceived party is to rescind the contract or to plea for damages.
b) According to the britannica.com, "Fraud, in law, is the deliberate misrepresentation of fact for the purpose of depriving someone of a valuable possession."
The systematic process of selecting, supporting, and managing a firm's collection of projects is called: Profile management. Heavyweight project management. Project portfolio management. Matrix project organization.
Answer:
Project portfolio management
Explanation:
Project portfolio management refers to managing the portfolios of the project i,e used by the project managers and the management who manages the project.
This is useful to analyze the risk and return in each project
Moreover, it is a process of choosing, supporting and managing the collection of firm projects in a systematic way
Hence, the third option is correct