Answer:
1. Metal.
Electrical wires are used to conduct electricity. Electrons have to flow through the wires in order to run the circuit. Only metals provide delocalized electrons that are free to move.
2. Metals, (usually)
Door handles should be strong that doesn't break easily. Metals are durable and corrosion resistant. Some metal alloys (like brass) are also found to be self-disinfecting.
3. Metals.
Radiators are usually used for emitting heat. Metals are good conductors of heat, which makes them great for making radiators.
4. Metals, (usually)
Most metals used for making chemical cupboard shelves are corrosion resistant, which causes less damage when chemical was spilled.
Answer:
1.Electrical wires - metals
They r used to conduct and transfer electricity from one place to another and therefor need to be made of metals [like copper] as they hv high electrical conductivity
Door handles - metals
They need to be corrosion resistant so dat they last longer and also there r smooth which makes it easier to hold them.
3.Radiator - metals
They r used for heat transformation and therefore they need to be made of metals as they hv high thermal conductivity [heat conductivity]
4.Shelves in the chemical cupboard - non metals
They need to be made of non metals as metals r reactive to chemicals and holes can be formed on them if a drop or two of chemicals fall on them.
Hope this helps....
Pls mark my answer as brainliest :)
give three example of mixture that can be separated by filtration process
Answer:
Mixture of sand and water.Mixture of chalk particles in water.Mixture of pebbles and water.Explanation:
Hope it helps.
7. Write a formula for each of the following:
(a) an alkane with 22 carbon atoms
(b) an alkene with 17 carbon atoms
(c) an alkyne with 13 carbon atoms.
Answer : The formula for each of the following is:
(a) [tex]C_{22}H_{46}[/tex]
(b) [tex]C_{17}H_{34}[/tex]
(c) [tex]C_{13}H_{24}[/tex]
Explanation :
Alkanes are hydrocarbon in which the carbon atoms are connected with single covalent bonds.The general formula of alkanes is [tex]C_n H_{2n+2}[/tex] where n is the number of the carbon atoms present in a molecule of alkane.
Alkenes are hydrocarbon in which the carbon atoms are connected with double covalent bonds.The general formula of alkenes is [tex]C_n H_{2n}[/tex] where n is the number of the carbon atoms present in a molecule of alkene.
Alkynes are hydrocarbon in which the carbon atoms are connected with triple covalent bonds.The general formula of alkynes is [tex]C_n H_{2n-2}[/tex] where n is the number of the carbon atoms present in a molecule of alkyne.
(a) An alkane with 22 carbon atoms
Putting n = 22 in the general formula of alkane, we get the formula of alkane as, [tex]C_{22}H_{2(22)+2}[/tex] or [tex]C_{22}H_{46}[/tex]
(b) An alkene with 17 carbon atoms
Putting n = 17 in the general formula of alkene, we get the formula of alkene as, [tex]C_{17}H_{2(17)}[/tex] or [tex]C_{17}H_{34}[/tex]
(c) An alkyne with 13 carbon atoms
Putting n = 13 in the general formula of alkyne, we get the formula of alkyne as, [tex]C_{13}H_{2(13)-2}[/tex] or [tex]C_{13}H_{24}[/tex]
Answer:
[tex]\huge \boxed{{C_{22} H_{46} \ \ \ \ C_{17} H_{34} \ \ \ \ C_{13} H_{24}}}[/tex]
Explanation:
[tex]alkanes \ \Rightarrow \ C_n H_{2n+2}[/tex]
[tex]C_{22} H_{2(22)+2}[/tex]
[tex]C_{22} H_{44+2}[/tex]
[tex]C_{22} H_{46}[/tex]
[tex]alkenes \ \Rightarrow \ C_n H_{2n}[/tex]
[tex]C_{17} H_{2(17)}[/tex]
[tex]C_{17} H_{34}[/tex]
[tex]alkynes \ \Rightarrow \ C_n H_{2n-2}[/tex]
[tex]C_{13} H_{2(13)-2}[/tex]
[tex]C_{13} H_{26-2}[/tex]
[tex]C_{13} H_{24}[/tex]
Scientific evidence shows that Earth's diameter, and thus overall size, does.
not change. This evidence goes against which two theories?
A. Expanding Earth
B. Plate tectonics
U
C. Contracting Earth
D. Continental drift
SUBMIT
Answer:
Expanding earth and contracting earth
Explanation:
Answer:
A and C
Explanation:
Which statement describes an effect of large asteroid and comet impacts?
Answer:
They could cause an organism and population and species to die.
Explanation:
If the asteroid hits on ground, there would be a colossal amount of dust thrown up into the atmosphere and our world. If it hits in water and ocean , then there would be a huge surge in water vapor in the atmosphere. This would result in an increase in rain resulting in landslides and mudslides
14.
Two jewelers were asked to measure the
mass of a gold nugget. The true mass of the
nugget is 0.856 grams (g). Each jeweler took
three measurements. The average of the
three measurements was reported as the
"official” measurement with the following
results:
Jeweler A: 0.863 g, 0.869 g, 0.859 g
Jeweler B: 0.875 g, 0.834 g, 0.858 g
Which jeweler's official measurement was
more accurate? Which jeweler's measure-
ments were more precise? In each case, what
was the error and percent error in the official
measurement?
Answer:
Jeweler B = more accurate
Jeweler A = more precise
Error:
0.008, 0
% error :
0.934% ; 0
Explanation:
Given that:
True mass of nugget = 0.856
Jeweler A: 0.863 g, 0.869 g, 0.859 g
Jeweler B: 0.875 g, 0.834 g, 0.858 g
Official measurement (A) = 0.863 + 0.869 + 0.859 = 2.591 / 3 = 0.864
Official measurement (B) = 0.875 + 0.834 + 0.858 = 2.567 / 3 = 0.8556
Accuracy = closeness of a measurement to the true value
Accuracy = true value - official measurement
Jeweler A's accuracy :
0.856 - 0.864 = - 0.008
Jeweler B's accuracy :
0.856 - 0.856 = 0.00
Therefore, Jeweler B's official measurement is more accurate as it is more close to the true value of the gold nugget.
However, Jeweler A's official measurement is more precise as each Jeweler A's measurement are closer to one another than Jeweler B's measurement which are more spread out.
Error:
Jeweler A's error :
0.864 - 0.856 = 0.008
% error =( error / true value) × 100
% error = (0.008/0.856) × 100% = 0.934%
Jeweler B's error :
0.856 - 0.856 = 0 ( since the official measurement as been rounded to match the decimal representation of the true value)
% error = 0%
hi :) how to test if a solution is neutral?
Explanation:
solution is neutral because it added water and water is neutral solution
Drag each label to the correct location. Match the climate zones to their relative temperature levels. (coldest zonehottest zonemoderate temperature zone)
Answer:
Polar Zones - Coldest Temperature
Temperate Zones - Moderate Temperature
Tropical Zones - Hottest Temperature
Explanation:
The closer you are to the Equator, the hotter it gets, as the sun hits the middle of the Earth the most. At the poles, the sun hits it there the least, so it is the coldest. In between, we would have a mild between hot and cold.
*Remember that the Earth is at a tilt, and that is why we have seasons and why the Equator is so hot and the Poles are so cold.
Answer:
I answered the question on edmentum and that person was correct.
Explanation:
The polar zone is the coldest because the Sun’s rays hit this part of Earth at a wide angle, causing their energy to be spread thinly over a large surface area.
The topical zone is the hottest because the Sun’s rays hit this part of Earth nearly straight on, focusing the heat on a small surface area.
The temperate zone experiences moderate temperatures because the Sun’s rays hit this zone at an angle that concentrates the heat on a surface area that is smaller than on the polar zone and larger than on the tropical zone.
PLEASE HELP!
Why is phosphorus diamagnetic.
Answer:
FROM the magnetic point of view, phosphorus is an extremely interesting
substance because of its allotropic modifications. The ordinary forms are
the yellow (or white) and the red varieties. X-ray investigations indicate
that probably yellow phosphorus is analogous with the cubic forms of antimony and arsenic; and red phosphorus with monoclinic antimony and
arsenic (Mellor, 1928). The conclusions of different workers on the structure of red phosphorus are not in agreement. There is also Bridgman's black
phosphorus which is probably hexagonal (Linck and lung, 1925). Natta
and Passerini (1930) have studied the crystal structure of white phosphorus.
This substance when condensed at the temperature of liquid ammonia is
cubic. Atomic positions however are yet undetermined. Another and noncubic form is obtained by condensation at liquid-air temperatures. It is
thus clear that most likely white phosphorus is cubic in structure with a
probable superposition of another lattice.
The evidence from Raman effect also points to the same conclusion.
Bhagavantam (1930) investigated the Raman effect of white phosphorus in
the solid state. The characteristic frequencies obtained by him are 607, 468
and 374. Since the phosphorus molecule is known to contain 4 atoms,
Bhagavantam (1930) has shown that the tetrahedral structure fits the results
satisfactorily since such a structure would give only three frequencies. But
for the particular law of forces adopted, the frequencies should have the
ratio 2: 2: 1 but the observed frequencies deviate considerably.
Phosphorus is a really intriguing element. because of the allotropic changes to the material.
Why phosphorus is dimagnetic?Red phosphorus is likely akin to monoclinic antimony, while yellow phosphorus is probably similar to the cubic forms of antimony and arsenic.
There is disagreement among the findings of many researchers regarding the structure of red phosphorus. Additionally, Bridgman's black It is presumably hexagonal, phosphorous (Linck and lung, 1925). Natta and Passerini (1930) have investigated the white phosphorus crystal structure.
Condensed from this material at liquid ammonia temperature is cubic. However, the locations of the atoms are still unknown. Condensation at liquid air temperatures yields a different, noncubic shape.
Therefore, Phosphorus is a really intriguing element. because of the allotropic changes to the material.
To learn more about phosphorus, refer to the link:
https://brainly.com/question/4622631
#SPJ3
The enthalpy of formation of water is –285.8 kJ/mol. What can be inferred from this statement? The enthalpy of the products is equal to the enthalpy of the reactants. Heat is absorbed during the process. Heat is released during the process. The enthalpy of the products is more than the enthalpy of the reactants.
Answer:
Heat is released during the process.
Explanation:
From the information provided in question, the enthalpy of formation of water is –285.8 kJ/mol. This is simply an exothermic reaction.
The negative sign indicates that the enthalphy of the reactants is more than the enthalphy of the products and as such, heat is released from the system into the surroundings.
The enthalpy of formation of water is –285.8 kJ/mol means that heat is released during the process.
What is enthalpy of formation of a substance?The enthalpy of formation of a substance is the amount of heat given off or absorbed when one mole of a substance is formed from the reactants.
A positive value for enthalpy means the reaction is endothermic while a negative value for enthalpy means the reaction is endothermic.
Therefore, the enthalpy of formation of water is –285.8 kJ/mol means that the reaction is exothermic and heat is released during the process.
Learn more about exothermic reactions at: https://brainly.com/question/2924714
#SPJ2
what sentence describes all atoms of one element A. They have the same number of isotopes B. They have the same properties C. They have the same number of protons D.They have the same number of neutrons
Answer:
C. They have the same number of protons.
Explanation:
Even though in isotopes, there's uneven number of neutrons, there's always same number of protons.
Hope it helps.
To draw a Lewis structure for a polyatomic ion, begin by calculating A, the available electrons, and N, the needed electrons. What is N for CIO3-, the chlorate ion?
Answer:
N for chlorate ion is one
Explanation:
Because N is the number of electrons needed to form octet structure causing a negative charge of one, since it already has 25valence electrons
Answer: 26
Correct Answer
The products of a reaction are NaCl and H2O. What does the law of conservation of matter reveal about the reactants in the reaction? A. At least some of the reactants will include NaCl and H2O. B. The reactants will contain only Na, Cl, O, and H in some amounts. C. Na, Cl, O, H, and three other elements were the reactant elements. D. The reactants will have one Na, one Cl, one O, and two H atoms.
Answer:
D
Explanation:
total mass should be equal on both sides
it's a double do displacement reaction
HCl + NaOH --> NaCl + H2O
Which compound is used to make asphalt? a saturated hydrocarbon that has more than 35 carbons in its chain a saturated hydrocarbon that has between 17 and 35 carbons in its chain a saturated hydrocarbon that has between 5 and 8 carbons in its chain a saturated hydrocarbon that has between 1 and 2 carbons in its chain
Answer:
answer is A. a saturated hydrocarbon that has more than 35 carbons in its chain
Explanation:
edge in 2020 :)
The compound which is used to make asphalt is a saturated hydrocarbon that has more than 35 carbons in its chain.
What is asphalt?Asphalt is also known by the name of bitumen, its appearance is sticky and black or present in semi solid form of petroleum.
Asphalt is a kind of hydrocarbon means mainly formed by the composition of carbon atoms and hydrogen atoms, but in very trace quantity amount of nitrogen, sulfur and other hateroatoms are also present. It is present in complex form means both saturated and unsaturated or aliphatic and aromatic compounds are present in it. It is formed by the long carbon chain which has a number of Carbon atoms around 150.
Hence it is a saturated hydrocarbon that has more than 35 carbons.
To know more about asphalt, visit the below link:
https://brainly.com/question/431314
You are performing an
experiment in your lab. To
compare with other experiments
your results must be in moles.
During your final step you burn a
strip of magnesium (Mg), which
results in 187 grams of
magnesium oxide (MgO). How
should you enter your results?
PSP
O
A. 7.7 moles Mgo
B. 4.6 moles Mgo
C. 187 grams Mgo
D. 7536.1 moles Mgo
Resot Selection
Answer:
4.6 moles MgO
Explanation:
number of moles is equals to the mass in grams divided by RFM
RFM=16+24.3=40.3
187/40.3
=4.6 moles of MgO
During your final step you burn a strip of magnesium (Mg), which results in 187 grams of magnesium oxide (MgO) the results would be 4.6 moles Mgo. option B is correct.
What are moles?The value of one mole is given by Avogadro's number which is 2.303 × 10²³ moles but here the used weight is given so number of moles will be calculated with other formula.
A strip of magnesium (Mg), which results in 187 grams of magnesium oxide (MgO) number of moles will be,
n = W / M
where , n = number of moles
W = given weight
M = molar mass
substituting the values in equation,
n = 187 / 40.30
n = 4.6 moles
Therefore, final step you burn a strip of magnesium (Mg), which results in 187 grams of magnesium oxide (MgO) the results would be 4.6 moles Mgo. option B is correct.
Learn more about moles, here:
https://brainly.com/question/2697881
#SPJ5
Bird wings and dragonfly wings are both used for flight.
Answer:
Yes
Explanation:
What's the question?
Answer:
yes, they both use it to fllight.
Explanation:
As they are adapted to flight to various places to catch their prey and be safe from various type of harms.
hope it helps..
Determine the new pressure of a sample of hydrogen gas if the volume and moles are constant, the initial pressure is 6.0 atm, and it is heated from 15°C to 30.°C. PLEASE HELP ASAP! THANK U SO MUCH!
6.3 atm
5.7 atm
12 atm
3.0 atm
Answer:
6.3 atm.
Explanation:
Data obtained from the question include:
Initial pressure (P1) = 6 atm
Initial temperature (T1) = 15°C = 15°C + 273 = 288K
Final temperature (T2) = 30°C = 30°C + 273 = 303K
Final pressure (P2) =..?
Since the volume and number of mole of the hydrogen gas sample is constant, the following equation will used to obtain the new pressure:
P1/T1 = P2/T2
6/288 = P2 /303
Cross multiply
288 x P2 = 6 x 303
Divide both side by 288
P2 = (6 x 303) /288
P2 = 6.3 atm
Therefore, the new pressure of the hydrogen gas sample is 6.3 atm.
Which is the electron configuration for zinc?
1. 1s22s22p63s23p64s2308
2. 1s22s22p63s23p64513d10
3. 1s22s22p53s23p64523010
4. 1s22s22p63s23p64523010
Answer:
The electron configuration for zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. To find electron configuration, simply follow the periodic table from top to bottom, left to right (basically increasing atomic number) until you reach the element you are looking for.
Which best explains why a firework being ignited is an example of an exothermic reaction and not an endothermic reaction?
A)The fireworks produce colors.
B)The fireworks give off heat.
C)Igniting the fireworks requires energy
D)Igniting the fireworks makes an odor.
Answer:B
Explanation:
TOOK DA TEST
As the firework releases heat, it is considered as exothermic reaction. The correct option is B.
What is exothermic reaction?An exothermic reaction is one in which the energy required to break bonds in the reactants is less than the energy released when new bonds form in the products.
Energy is constantly released during an exothermic reaction, often in the form of heat. Exothermic reactions characterize all combustion reactions.
Endothermic reactions are chemical reactions that produce products by absorbing heat energy from their surroundings.
Exothermic reactions are important in forensic science, particularly in the investigation of fires and explosions.
Endothermic refers to a chemical reaction that requires heat and results in cooling of the surroundings.
As fireworks are releasing energy in the form of heat, it can be called as an exothermic reaction.
Thus, the correct option is B.
For more details regarding exothermic reaction, visit:
https://brainly.com/question/10373907
#SPJ6
how many bonds are present in NCl3
What goes in the rest?
Answer:
E. Mass number
H. Ion
F. Isotopes
I hope you have a great day. I'm sorry that I didn't know C or I.
In which two places is aggregate generally found? A.floodplains and alluvial fans B.alluvial fans and mines C.mines and beneath the topsoil D.beneath the topsoil and above the topsoil ED2020
Answer:
A.floodplains and alluvial fans .
Explanation:
Hope it helps.
Answer:A)
Explanation:
Calculate the mass (in grams) of hydrogen gas produced when 33.61 g of
diborane (B2H) reacts with excess water.
B Holg) + 6H2O(1)→ 2 H3B03(s) + 6H2(g)
Only enter numerical value without units.
Answer:
14.40g of H2
Explanation:
The balanced equation for the reaction is given below:
B2H6(g) + 6H2O(l) → 2H3BO3(s) + 6H2(g)
Next, we shall determine the mass of B2H6 that reacted and the mass of H2 produced from the balanced equation. This is illustrated below:
Molar mass of B2H6 = (2x11) + (6x1) = 28g/mol
Mass of B2H6 from the balanced equation = 1 x 28 = 28g
Molar mass of H2 = 2x1 = 2g/mol
Mass of H2 from the balanced equation = 6 x 2 = 12g
From the balanced equation above,
28g of B2H6 reacted to produce 12g of H2.
Finally, we shall determine the mass of H2 produced when 33.61g of B2H6 reacted with excess water. This can be obtained as follow:
From the balanced equation above,
28g of B2H6 reacted to produce 12g of H2.
Therefore, 33.61g of B2H6 will react to produce = (33.61 x 12)/28 = 14.40g of H2.
Therefore, 14.40g of H2 were produced from the reaction.
hi:) how to do question 3?:)
Answer:
5
Explanation:
Distilled water has a pH of 7 while CO2 is slightly acidic and therefore if we combine both substances we should get a pH just below 7 which if 5
Answer:
A) 5
Explanation:
5
The pH of distilled water immediately after distillation is 7, but within hours after distillation, it has absorbed carbon dioxide from the atmosphere and become acidic with a pH of 5
How can we tell the difference between gases like hydrogen, oxygen, and carbon dioxide cause they all look to same?
Answer:
The critical chemical difference is that CO2 contains one atom of carbon and two atoms of oxygen, whilst CO has one carbon and one oxygen atom.
4. Which change to a DNA molecule would have the least effect on an organism?
A: an addition to a base sequence at the beginning of a gene
B: a substitution in a base sequence that does not code for a protein
C: a substitution that creates a "stop" code in the middle of a gene
D: a deletion from a base sequence in the middle of a gene
Answer: Change in a single nitrogen base in the DNA sequence will not have any significant effect on the organism.
So A
Explanation:
This is known as point mutation and it does not have any significant change in the protein and it is least harmful type of DNA mutation.
How many grams of carbon dioxide does a hummingbird emit daily?
Answer:
3.5 g CO2
Explanation:
A hummingbird emits up to 3.5 grams of CO2 a day.
Equation:7.9 x 10‒2mol CO2x (44.01 g CO2/ 1 mol CO2)
=3.5 grams
Hope this helps!
what’s the mass of 0.0485 moles of Na2CO3
Answer:5.1g
Explanation:number of moles of Na2co3 is 0.0485 and it molar mass = 23×2+12+16×3=106
n=m/M
Therefore m= n×M
m= 0.0485×106
=5.141g
The mass of 0.0485 moles of Na2CO3 of 5.141 grams.
What is mass?Mass is defined as a dimensionless number used to describe the mass of a particle or item. Inertia, or the body's resistance to acceleration when a net force is applied, is also measured by this term. The strength of an object's gravitational pull to other bodies is also influenced by its mass. The kilogram serves as the SI's fundamental mass unit. Mass is a physical body's total amount of matter. Gravity and inertia, which are the two main forces influencing how objects move in space, make mass crucial.
Mass can be calculated as
Mass = molar mass x number of moles
Molar mass = 23 x 2 + 12 + 16 x 3
= 106 grams
Mass = 106 x 0.0485
= 5.141 grams
Thus, the mass of 0.0485 moles of Na2CO3 of 5.141 grams.
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
Which answer below correctly identifies the type of change and the explanation for the boiling of water?
o physical change because even though the change caused the temperature of the water to
increase, the water's physical properties remained exactly the same
o physical change because even though gas formation was observed, the water was undergoing a
state change, which means that its original properties are preserved
chemical change because gas formation was observed, which indicated that the water was
transformed into a different substance
O chemical change because a temperature change was observed, which indicated that the water
was transformed into a different substance
Answer:
O chemical change because a temperature change was observed, which indicated that the water
Explanation:
I have taken this class
What type of nuclear decay is shown by the reaction below?
2390 → He + 23% Th
O A. Fusion
B. Alpha
C. Beta
D. Gamma
Answer:
B. Alpha
Explanation:
Alpha decays always split into an element and He.
Beta decays always split into an element and e- (eletrons).
Gamma decays always split into an element and radiation.
1.1 The elements with the lowest ionization energy of all element are
O The noble gases
O The alkali metals
O The alkaline earth metals
O The halogens
Answer:
O The alkali metalsThe elements with the lowest ionization energy of all element are alakli metals
Explanation:
According to research,
The element with the lowest ionization energy is cesium (Cs). Cesium has atomic number 55 and is in the fifth row of the periodic table.
Caesium is a soft, silvery-golden alkali metal .