State and explain the three basic properties of element​

Answers

Answer 1

Answer: Some are solid, some are gaseous, a few are liquid. Some are metallic: they have a peculiar lustre; some are coloured (like sulfur) or colourless. Some have a low density; some have a high density. Some are malleable and ductile; some are brittle. Some conduct electricity and heat well; some don’t.

Many metals tend to have structural uses. Nonmetallic elements less so.

Metals tend to have crystal forms featuring close-packed centro-symmetrical structures. Nonmetallic elements tend to have crystal structures featuring more open and directionally packed structures.

Some are especially toxic; some are essential to life; some are both depending on exposure level.

Most are stable; some are less so.

Some elements are highly reactive; some are almost inert (helium, neon, and argon may be completely inert in ambient conditions).

Many metals have basic oxides; quite a few oxides of nonmetallic elements form acids when they are dissolved in water. Some elements can go both ways.

There are many generalisations you can make about metallic and nonmetallic elements, and quite a few exceptions at the margins.

Explanation:

Answer 2

Given :-

State and explain the three basic properties of element.

Answer :-

Some properties of an element can be observed only in a collection of atoms or molecules of the element. These properties include color, density, melting point, boiling point, and thermal and electrical conductivity.

[tex] \\ [/tex]

Answered by - ItzMaster


Related Questions

you have a gas that has a pressure of 2 atm and a volume of 10L. what would be the new volume if the pressure was changed to 1atm?​

Answers

Answer:

20 Liters

Explanation:

Boyles Law => ΔP ∝ 1/ΔT => P₁V₁ = P₂V₂ => V₂ = P₁V₁/P₂

P₁ = 2 atm

V₁ = 10 Liters

P₂ = 1 atm

V₂ = ?

V₂ = 2atm x 10L / 1atm = 20 Liters

Don’t have to explain please just give me an answer

Answers

Answer:

the 3rd one is the answer

Calculate the mass in grams of 2.56 × 10 −3 mol of iron.

Answers

Answer:

1.43 grams

Explanation:

Fe = 55.8 grams Fe = 1 mole Fe

2.56 • 10^-3 moles Fe / 1 • 55.8 grams Fe / 1 mole Fe = 1.43 grams Fe

Basically, you're just multiplying the molar mass of Fe (iron) by the moles of 2.56 • 10^-3 Fe, to find how many grams are in it.

2.56 • 10^-3 moles Fe = 1.43 grams Fe

Which three of the following are the laws that Mendel discovered?
Law of Heredity
The Law of Segregation
The Law of Dominance
Law of Gravity
The Law of Independent Assortment

Answers

Answer:

genetics i.e the law of heredity

Answer:Mendel proposed three laws: Law of Dominance. The Law of Segregation. Law of independent assortment.

Explanation:Gregor Johann Mendel was a scientist who is recognized as the Father and Founder of genetics. Mendel conducted many experiments on the pea plant (Pisum sativum) between 1856 and 1863. He studied the results of the experiments and deducted many observations. Thus, laws of inheritance or Mendel’s laws of inheritance came into existence. Before learning about Mendel’s laws of inheritance, it is important to understand what the experiments performed by Mendel were.

HELP PLEASE
an unknown gas has a pressure of 121.6 kPa, a volume of 31 L and a Temperature of 256K. How many moles of gas
are there?

Answers

Answer:

0.031moles

Explanation:

ok so it would help if I knew the marks but 1 mole = 1000L so if the volume was 31L then if you convert you will get that answer

The moles of gas at the given sample of gas is 1.7 moles.

What is ideal gas equation?

Ideal gas equation gives idea about the behavior of gas at different condition & represented as:

PV = nRT, where

P = pressure = 121.6 kPa = 1.2 atmV = volume = 31 Ln = moles = ?R = universal gas constant = 0.082 L.atm / K.molT = temperature = 256K

On putting all these values, we get moles as:

n = (1.2)(31) / (0.082)(256) = 37.2 / 20.9

n = 1.7 moles

Hence required moles of gas is 1.7 mole.

To know more about ideal gas equation, visit the below link:

https://brainly.com/question/555495

#SPJ2

Why do you think Newton’s cradle stops swinging? What does this imply about the energy in the system of pendulums?

Answers

As the balls on either end swing, eventually, the balls lose energy to many things. This includes air due to air friction, sound when they collide and finally heat upon collision.

HELP A #QUEEN OUT !!!!!!

Select the correct answer.

Which reaction is a decomposition reaction?

A.
2KClO3 → 2KCl + 3O2
B.
4Na + O2 → 2Na2O
C.
ZnS + 3O2 → 2ZnO + 2SO2
D.
2NaBr + CaF2 → 2NaF + CaBr2

Answers

A but remove the coefficients from kcl and 3

Answer: 2KClO3 → 2KCl + 3O2

Explanation: it's the only one that was broken down into more parts than the start, the rest were simply reseperated

this one : 1 → 2

b : 1 + 1 = 2

c : xy+ wz  → wy + xz

d : qwer +tyuio → qwui + tyero

ALSO I got it right

Image attached 50 points!

Answers

You know the number of moles of Mg that react: 6 moles.

You don't know (yet) how many moles of Mg₃N₂ are produced when 6 moles of Mg react.

The coefficients of each substance in the chemical equation tells us the molar ratio between the substances. The coefficient of Mg is 3, and the coefficient of Mg₃N₂ is 1 (coefficients of 1 are implied and omitted). So, for every 3 moles of Mg that react, 1 mole of Mg₃N₂ is produced.

We can use the proportion set up in the image to calculate the number of moles of Mg₃N₂ produced. In the first fraction, the green-boxed numerator should be our known number of moles of Mg, that is, 6 moles Mg. In the second fraction, we insert our molar ratio. Since we want the product of these two fractions to have the units "moles Mg₃N₂," the numerator in the second fraction should be 1 mole Mg₃N₂ and the denominator should be 3 moles Mg.

Our setup should look like this:

[tex]\frac{\textrm{6 moles Mg}}{1} \times \frac{\textrm{1 mole }\mathrm{Mg_3N_2}}{{\textrm{3 moles Mg}}} = \textrm{2 moles }\mathrm{Mg_3N_2}.[/tex]

Indeed, 2 moles of Mg₃N₂ are produced.

Answer:

2 moles of Mg₃N₂ are produced.

Explanation:

Sodium chlorate is used to produce yellow fireworks. Heating sodium chlorate creates oxygen and sodium chloride. How many moles of sodium chlorate is needed to produce 5.70 moles of oxygen?

Answers

https://www.geneva304.org/Downloads/ch%209%20key6.pd

this is what i found add an "f" at the end and search

If you have a cup of water at 35 degrees Celsius, and a bath tub of water at 35 degrees Celsius which will melt the most ice and why?

Answers

The bathtub of water would melt the most ice because it has a larger area

Clasifica cada uno de los siguientes incisos como sustancia pura (elemento y compuesto) o mezcla (homogénea y heterogénea). Explica brevemente. (a) arroz con leche (b) agua de mar (c) magnesio (d) gasolina

Answers

Answer:

Ver explicacion

Explanation:

Un arroz con leche es una mezcla heterogénea porque está compuesto por partículas sólidas de diferentes tipos y tamaños.

El agua de mar es una mezcla homogénea de sustancias todas en la misma fase.

El magnesio es una sustancia pura y es un elemento.

La gasolina es una mezcla homogénea de sustancias comúnmente utilizadas como combustible.

what ive learned about heat,sound and light​

Answers

Answer:

they are all in parts of our life and we need them each for surviving.

Explanation:

ILL GIVE BRAINLEST


What does the half-life of a radioisotope correspond to?

Answers

Answer:

To describe the rate at which the isotope will decay and give off radiation.

Explanation:

How many moles are present in 5.24g of H2O?

Answers

Answer:

The answer is 18.01528.

We assume you are converting between grams H2O and mole.

Explanation:


???????????????????????

Answers

Answer:

B and D

Explanation:

Bc it has more fat than the other

1) Which New York State landscape region is located at 42 N, 75 W?
A) Erie-Ontario Lowlands
B) Hudson-Mohawk Lowlands
C) the Catskills
D) Tug Hill Plateau

Answers

Answer:C) the Catskills

Explanation:

Difine the term compound​

Answers

Answer:

Its when like two pure substances are like combined into one.

Explanation:

Determine the volume of the product containing carbon produced when 15.0 g of C2H2 are reacted with an excess of oxygen gas

Answers

Answer:

25.8 L

Explanation:

Step 1: Write the balanced equation for the complete combustion of acetylene

C₂H₂ + 2.5 O₂ ⇒ 2 CO₂ + H₂O

Step 2: Calculate the moles corresponding to 15.0 g of C₂H₂

The molar mass of C₂H₂ is 26.04 g/mol.

15.0 g × 1 mol/26.04 g = 0.576 mol

Step 3: Calculate the moles of CO₂ produced from 0.576 moles of C₂H₂

The molar ratio of C₂H₂ to CO₂ is 1:2. The moles of CO₂ produced are 2/1 × 0.576 mol = 1.15 mol.

Step 4: Calculate the volume corresponding to 1.15 moles of CO₂

At standard temperature and pressure, 1 mole of CO₂ occupies 22.4 L.

1.15 mol × 22.4 L/1 mol = 25.8 L

Name the following base: NaOH

Answers

Answer:

Arrhenius Base

Explanation:

"NaOH is an Arrhenius base because it dissociates in water to give the hydroxide (OH-) and sodium (Na+) ions. An Arrhenius acid is therefore any substance that ionizes when it dissolves in water to give the H+, or hydrogen, ion. ... Acids provide the H+ ion; bases provide the OH- ion; and these ions combine to form water."

==================================================================

Hope I Helped, Feel free to ask any questions to clarify :)

Have a great day!

More Love, More Peace, Less Hate.

    -Aadi x

When the pressure is in a certain gas cylinder with a volume of 4.50 L reaches 500atm, the cylinder is likely to explode. If this cylinder contains 40.0 moles of argon at 25.0°C, is it on the verge of exploding? Calculate the pressure

Answers

Answer:

The cylinder is nit on the verge of exploding.

Explanation:

Temperature= 25.0°C

The conversion of T(°C) to T(K) is shown below:

T(K) = T(°C)+ 273.15

So,

T=(25.0 + 273.15) K = 298.15 K

Volume= 4.50 L

Moles= 40.0 mol

Using ideal gas equation as:

PV  = nRT

where,

P is the pressure

V is the volume

n is the number of moles

T is the temperature

R is gas constant having value = 0.0821 Latm/ K. mol x 298.15 K

⇔ P= 217.58 atm

Pressure limit = 500 atm .

What plants need in order for photosynthesis to occur

A) Photosynthesis
B)Products
C)Chloroplasts
D)Glucose

Answers

Answer:

for photosynthesis to occur you need chloroplasts, light, water and carbon dioxide. hopefully that helps

⦁ Find the concentration of H+, OH-, PH and POH of 0.03 M of magnesium hydroxide which ionizes to the extent of only 1 /3 in aqueous solution.

Answers

Answer:

[tex]pH=12.3\\\\pOH=1.7\\[/tex]

[tex][H^+]=5x10^{-13}M[/tex]

[tex][OH^-]=0.02M[/tex]

Explanation:

Hello there!

In this case, according to the given ionization of magnesium hydroxide, it is possible for us to set up the following reaction:

[tex]Mg(OH)_2(s)\rightleftharpoons Mg^{2+}(aq)+2OH^-(aq)[/tex]

Thus, since the ionization occurs at an extent of 1/3, we can set  up the following relationship:

[tex]\frac{1}{3} =\frac{x}{[Mg(OH)_2]}[/tex]

Thus, x for this problem is:

[tex]x=\frac{[Mg(OH)_2]}{3}=\frac{0.03M}{3}\\\\x= 0.01M[/tex]

Now, according to an ICE table, we have that:

[tex][OH^-]=2x=2*0.01M=0.02M[/tex]

Therefore, we can calculate the H^+, pH and pOH now:

[tex][H^+]=\frac{1x10^{-14}}{0.02}=5x10^{-13}M[/tex]

[tex]pH=-log(5x10^{-13})=12.3\\\\pOH=14-pH=14-12.3=1.7[/tex]

Best regards!

Baby Mice

Seif's pet mouse had babies. Five of the babies were black and two were white. The
father mouse was black. The mother mouse was white. Seif and his friends wondered
why the mice were different colors. These were their ideas
Jerome: Baby mice inherit more traits from their fathers than their mothers
Alexa: The baby mice got half their traits from their father and half from their mother.
Juner Male traies are stronger than female traits.
Seif Rack mke have more traies than white mice.
Fiona: The black baby mice are probably make and the white baby mice are probably
female
India, Paver in die for colo don't matter what whine will
Consider Seif and his friends responses/ideas. Answer the
following questions:

1. Which friend has the correct answer about how traits are inherited in this method of reproduction?

2. Is this type of reproduction asexual or sexual? How do you know? (use details from the texti

Answers

Answer:

I would say for #1 Fiona and for #2 sexual

Explanation:

Please give brailiest

A mass of 0.30 kg is attached to a spring that has a spring constant of 210 N/m. What will be the period of this system?

Answers

Answer:

its A hope this helps

Explanation:

PLEASE HELP!!!!! 10 POINTS!!
What electron could have quantum numbers n=3, l=0, ml=0, ms=-1/2

Answers

Answer:

Explanation:

It is a 3s electron

Materials that do not allow electrons to flow easily are called _____________.

Answers

Answer:

Materials that do not let current flow easily are called insulators.

Most nonmetal materials such as plastic, wood and rubber are insulators

What is the charge of a Li ion?
A. +1
B. +2
C. -1
D.-2

Answers

Answer:

A

Explanation:

because the charge of Li ion is +1 well I don't know the explanation yet but I'm sure about the answer

PLEASE HELO DOES ANYONE KNOW THE RIGHT ANSWER ??

Answers

Answer:

the last one because matter is the amount of space

How is a molecule and compound similar? How are they different from each other?

Answers

Answer:

A molecule is a group of two or more atoms held together by chemical bonds. A compound is a substance which is formed by two or more different types of elements which are united chemically in a fixed proportion. All molecules are not compounds. All compounds are molecules.

Explanation:

Compare a low-dose rate internal radiation treatment to a high dose rate internal treatment. What do you think are the positives and negatives of each?

Answers

Internal radiation is also called brachytherapy. A radioactive implant is put inside the body in or near the tumor. Getting the implant placed is usually a painless procedure. Depending on your type of cancer and treatment plan, you might get a temporary or a permanent implant. Internal radiation therapy (brachytherapy) allows a higher dose of radiation in a smaller area than might be possible with external radiation treatment. It uses a radiation source that’s usually sealed in a small holder called an implant. Different types of implants may be called pellets, seeds, ribbons, wires, needles, capsules, balloons, or tubes. No matter which type of implant is used, it is placed in your body, very close to or inside the tumor. This way the radiation harms as few normal cells as possible.

During intracavitary radiation, the radioactive source is placed in a body cavity (space) , such as the rectum or uterus.
With interstitial radiation, the implants are placed in or near the tumor, but not in a body cavity. The implant procedure is usually done in a hospital operating room designed to keep the radiation inside the room. You’ll get anesthesia, which may be either general (where drugs are used to put you into a deep sleep so that you don’t feel pain) or local (where part of your body is numbed).

One or more implants is put into the body cavity or tissue with an applicator, usually a metal tube or a plastic tube called a catheter. Imaging tests (an x-ray, ultrasound, MRI, or CT scan) are usually used during the procedure to find the exact place the implant needs to go.

Before being placed, implants are kept in containers that hold the radiation inside so it can’t affect others. The health professionals handling the implants may wear special gear that protects them from exposure once the implants are taken out of the container. High-dose-rate (HDR) brachytherapy allows a person to be treated for several minutes at a time with a powerful radioactive source that’s put in the applicator. The source is removed after 10 to 20 minutes. This may be repeated twice a day over a few days, or once a day over the course of a few weeks. The radioactive material is not left in your body. The applicator might be left in place between treatments, or it might be put in before each treatment.

People getting HDR sometimes stay in the hospital if it involves multiple day treatments and if the applicator is left in place. There may be special precautions to take after the treatment, so be sure to talk to the cancer care team about this. In this approach, the implant gives off lower doses of radiation over a longer period.

Some implants are left in from 1 to a few days and then removed. You’ll probably have to stay in the hospital, sometimes in a special room, during treatment. For larger implants, you might have to stay in bed and lie still to keep it from moving.

Some smaller implants (such as the seeds or pellets) are left in place and never taken out. Over the course of several weeks they stop giving off radiation. The seeds or pellets are about the size of rice grains and rarely cause problems. If your implants are to be left in, you may be able to go home the same day they’re put in. There may be special precautions to take, so be sure to talk to the cancer care team about this.




Other Questions
What similarities do you see between Sacco and Vanzetti and the case of Billy Glaze? What is an equation of the line that passes through the point (- 2, 7) and is perpendicular to the line x - 4y = 24 ? Pls help . A bus leaves the school to take students on a field trip. The bus travels 10 kilometers south, 10 kilometers west, another 5 kilometers south and 15 kilometers north. To return to the school, in which direction does the bus have to travel? How many kilometers must it travel in that direction? How was Florida granted statehood?A. It was added at the same time as Maine in order to keep balance in congressfreeB. It was admitted 6 years after requesting to join as a slave state when lowa was added asstateC. It was admitted 6 years after requesting to join as a free state when lowa was added as a slavestateD. It was accepted right away as a slave state What is the name of the first female prime Minister of Canada Another name for a single-celled organism isA. uni-cellularB. one cellularC. multi-cellularD. eukaryotic I need help with this Spanish please 3. Which ordered pair is the solution to the following system of equations?y = x + 4x+y=2 The volume of a gas-filled balloon is 20.0 L at 60 atm pressure. What volume in liters will the balloon have at 30 atm? A data set is made up of the values 6, 6, 7, 10, and 11. The table shows the distance between each value and the mean of 8. Data value Distance between value and mean 6 6 2 2 1 7 3 Sum of distances What is the mean absolute deviation (MAD) of the data set? A. 3B. 8 C. 5 D. 2 I got the lateral I just need help with the total surface area find the arc length if you need to read the passed this is on newsela Whats the value of 42(2+5)3 (05.03 LC)A polygon is shown:A polygon MNOPQR is shown. The top vertex on the left is labeled M, and rest of the vertices are labeled clockwise starting from the top left vertex labeled, M. The side MN is parallel to side QR. The side MR is parallel to side PQ. The side MN is labeled as 3 units. The side QR is labeled as 7 units. The side MR is labeled as 3 units, and the side NO is labeled as 2 units.The area of polygon MNOPQR = Area of a rectangle that is 9 square units + Area of a rectangle that is ___ square units. (Input whole numbers only, such as 8.)Numerical Answers Expected! Find the area of the figure shown below and choose the appropriate result.A. 96 mm^2B. 102 mm^2C. 90 mm^2D. 140 mm^2 Contrast primary succession and secondary succession. Give anexample of each. How is information for a specific protein carried on the DNA molecule?a. as a sequence of nucleotidesb. in the double helix shape of the condensed chromosomec. in the ratio of adenines to thyminesd. as a pattern of phosphates and sugars The area of the triangle below is 25/72 square meters. What is the length of the base? How many moles are present in 5.24g of H2O?