Li2S + 2 HNO3 --> 2 LiNO3 + H2S
Li2 S + H2 N2 O2 --> Li2 N2 O5 + H2 S
Li S + H2 N2 O5 -> Li N2 O5 + H2 S
Li2 S2 + H4 N4 O10 --> Li2 N4 O10 + H4 S2
Li^2 S^2 + H^4 N^4 O^10 --> Li^2 N^4 O^10 + H^4 S^2
Which is the mass of 0.13 moles of potassium chloride, KCl
Answer:
9.69 grams
Explanation:
e
Answer:
9.69g KCl
Explanation:
[tex]0.13 molesKCl\frac{74.55gKCl}{1moleKCl} =9.69gKCl[/tex]
Where are most algae found?
on the surface of lakes
growing on the ocean bottoms
floating on water world-wide
in forests around the world
Answer:
on the surface of lakes
Explanation:
Why is balance important in organisms?
6. An acidic solution of potassium dichromate is mixed with an aqueous solution of
hydrogen peroxide.
Which of the following is the correct chemical equation and is properly balanced for:
Iron III oxide reacts with potassium iodide to produce iron III iodide and potassium oxide
Answer:are there any abc or do you have to make an answer?
Explanation:
11.
The characteristics of a group of elements are listed in the table.
Characteristics of a group of Elements
• Solid at room temperature
• Good conductor of electricity
• Atoms have one valence electron
Which of these elements is in this group?
A. Sodium
B. Phosphorus
C. Bromine
D. Neon
Answer:
Sodium
Explanation:
I dont know but its a wild guess
Answer:
sodium
Explanation:
its solid at room temp, most metals are good conductor of electricity and also its in group 1A so it has one valence electron
What is the molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution?
Answer:
D
Explanation:
all ya got to do is divide the moles from the solution... so 3.0 divided by 0.25. put it in a calculator
hope this helps
The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
What is Molarity?Molarity of a given solution is known as the total number of moles of solute per litre of the solution. A solution that is 1.00 molar (written 1.00 M) contains 1.00 mole of solute for every liter of solution.
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
The unit of molarity is mol L⁻¹.
Molarity is temperature dependent because as temperature changes, volume of the solution also changes.
Given,
3.0 moles of Saline (NaCl)
Volume of solution = 0.25L
Molarity = (No. of moles of solute ÷ Volume of solution in liters)
Molarity = 3 ÷ 0.25 = 12 M
Therefore, The molarity of a solution made from dissolving 3.0 moles of Saline (NaCl) in 0.25 L of solution is 12M.
Learn more about molarity, here:
brainly.com/question/8732513
#SPJ2
HELP ASAP Will Give Brainlist
The correct answer is actually
D. requires a lot of energy to become hot.
As the definition of specific heat is "the heat required to raise the temperature of the unit mass of a given substance by a given amount."
6) What causes the stars to give off light when ignited?
Answer:
When fireworks explode in the sky, the gunpowder reactions create a lot of heat, causing the metallic substances pres- ent in the stars to absorb energy from the heat and emit light. ... These electrons absorb energy from the heat, which causes them to move from their original ground-energy state to an excited state.
Explanation:
:))
The process which generates energy in sun and other stars is nuclear fusion. The emission of light energy is thus the result of fusion reaction taking place in stars.
What is nuclear fusion?Nuclear fusion is a chemical process in which two light nuclei or isotopes of an atom fuse together to form a heavy nuclei with the release of million tons of energy.
The process in which a heavy atom breaks into lighter atoms is called nuclear fusion and it is also releasing massive energy but less than the from fusion because, the breaking of chemical bonds needs some energy to absorb.
Fusing two chemical bonds is needs no more energy and it is an energy releasing process. Millions of hydrogen atoms and its isotopes fuse together in several steps and form helium atoms.
This process of release million tons of heat energy and light energy. This will make the stars glow.
To find more about nuclear fusion, refer the link below:
https://brainly.com/question/12701636
#SPJ2
Please help! It’s due today. I’ll give brainliest
How many neutrons does calcium have?
.20. 60. 79. 40
Answer:
20
Explanation:
Atomic number/proton number = 20 (protons in nucleus)
Atomic mass number = 40 (protons + neutrons in nucleus)
40 - 20 = 20
PLSSS HELP
How is a balanced chemical reaction, like N2 +
3H2 --> 2NH3, similar to a recipe?
Answer: With each input, there is an output, a recipe requires certain ingredients, and certain amounts of each. A recipe calls for measurements, missing something can ruin it, just like a chemical formula, take something out or add something else, you get something completely different. when putting things together to make something you have to make sure what your putting in, will give you the product you want as the output.
Explanation:
I need help, please answer
Answer:
it explodes
Explanation:
Answer:
Mrs girl I'm sorry I don't know
I just need the points
4 Which pair of ions is isoelectronic?
A Ca2+ and 02-
B Na+ and 02-
OC Lit and Cl-
OD Mg2+ and CI-
Answer:
B. Na+ and O2-
Explanation:
Na+ plus has 10 electrons and O2- also has 10 electrons
Cyclopropene decomposes to propene when heated to 500 C, calculate rate constant for the first order reaction 0 min 1.48 mmol/L
Answer:
k = 0.0306 min-1
Explanation:
The table is given as;
Time, Concentration
0 1.48
5 1.27
10 0.98
15 0.84
The integrated rate law for a first order reaction is given as;
ln [A] = -kt + ln [Ao]
where;
[A] = Final Concentration
[Ao] = Initial Concentration
k = rate constant
t = time
In the table, taking the first two sets of values;
t = 5
k = ?
[Ao] = 1.48
[A] = 1.27
Inserting into the equation;
ln(1.27) = - k (5) + ln(1.48)
ln(1.27) - ln(1.48) = -5k
-0.1530 = -5k
k = -0.1530 / -5
k = 0.0306 min-1
If a 60 kg object is moving at a velocity of 10 m/s and it's 25 meters high off the ground what would if mechanical energy be?
Answer:
Like all questions in this sublevel, the work done by non-conservative forces must be related to the changes in energy of the object (see Physics Rules section above). In the case of the car skidding to a stop, the kinetic energy equation (see Formula Fix section below) can be used to determine the initial and final kinetic energy of the car. Since the car is on the ground, the height and potential energy can be regarded as zero.
Explanation:
A bowler lifts her bowling ball a distance of 0.5 meters using 35 joules of energy. If, on Earth, a 1.0 kilogram mass weighs 9.8 newtons, the mass of the bowling ball used by this bowler is about;
Answer:17.5
Explanation: (0.5 meters)(35 Joules) =
When the bowler lifts the bowling ball for a distance of 0.5 m, the mass of the bowling ball used by the bowler is 17.3 kg.
What is Energy?The ability to do work is called Energy.
As work done and energy has the same units. The energy required is equal to the work done.
E = W = 35 J
Force acting on the ball is equal to the weight of the ball.
F = Weight =mg
where m = mass of the bowling ball and g = acceleration due to gravity
Substituting the given energy and distance moved, we have
[tex]35 = m\times9.81\times0.5\\ m=17.3 \:\rm kg[/tex]
Therefore, the mass of the bowling ball is 17.3 kg.
Learn more about energy
https://brainly.com/question/1932868
#SPJ2
Calculate the reaction rate given the following:
After 2 minutes (120 seconds), the concentration of a product was measured to
increase from 0.0012 M to 1.48 M.
1.48 M/s
0.0123 M/s
0.0012 M/s
-0.0123 M/s
Answer:
0.0123 M/s
Explanation:
The reaction rate is the rate at which the reaction takes place and results in an increased concentration of the products. The rate of the reaction is 0.0123 M/s.
What is the reaction rate?
The reaction rate is the increase of the concentration of the product with respect to time in seconds. The rate of reaction is given by,
[tex]\rm rate = \rm \dfrac {\Delta C}{\Delta t}[/tex]
Given,
Change in product concentration = 1.478
Time period = 120 seconds
Substituting values in the above equation:
[tex]\begin{aligned} \rm rate &= \rm \dfrac {\Delta C}{\Delta t}\\\\& = \dfrac{1.478}{120}\\\\&= 0.0123 \end{aligned}[/tex]
Therefore, option B. 0.0123 M/s is the reaction rate.
Learn more about reaction rate here:
https://brainly.com/question/13440548
366 Cal to kilowatt-hours, how to convert?
Answer:
0.000425 kilowatt hour
Please Help!
How is a pure sample of cobalt obtained
True or False
All cells are the same on the inside
HELP ME!
True or False: Different substances, like shortening and soap, will melt at the same temperature. True False
Answer:
false
Explanation:
different things will have different melting points
How many molecules are in 5.60 L of oxygen gas
Answer:
5.6L of O2 means we have 0.25 moles of O2. and as 1 molecule of O2 has 2 atoms, so, 1.50575*10^23 molecules will have 2*1.50575*10^23 atoms=3.0115*10^23 atoms of O.
True or False: if chemicals behave in a similar way they are grouped together on the periodic table
Answer:
Explanation: it is true
Did the argon change state as you heated the atoms?
When heat is added to a substance, the molecules and atoms vibrate faster. As atoms vibrate faster, the space between atoms increases. Solids, liquids and gases all expand when heat is added. When heat leaves all substances, the molecules vibrate slower. So yes, it can if the heat is strong enough to change the objects compesistion! :)
Argon is a noble gas. It always exists in the form of gas. The boiling point of argon is very higher and thus we cant change its state, by simply heating.
What is argon ?Argon is 18th element in periodic table. It has 18 electrons and 18 protons. The mass number of argon is around 36 g/mol. Argon is included in the group 18 called the noble gases.
All the noble gases are highly stable and they are not reactive at normal conditions. They cant be easily form compounds or change their state by excitation or photochemical reaction.
Argon has higher melting point and boiling point. It cannot be easily transformed to another state by simply heating. But there occurs electron excitation, where the phase change cannot occurs.
Find more on argon:
https://brainly.com/question/133359
#SPJ3
Give one safety precaution should take during carbon and lead oxide experiment
Answer:
use safety goggles
Explanation:
plz give me brainleist
Are humans more similar to trees or bacteria? How do you know?(1 point)
A
Humans are more similar to bacteria because trees cannot move around their environment.
B
Humans are more similar to trees because bacteria are too small to see.
C
Humans are not similar to trees or bacteria. Humans are a special species that is not related to any other species on Earth.
D
Humans are more similar to trees because all plants and animals are part of the same domain.
Answer:
a
Explanation:
Answer:
Option D
Explanation:
A and B both make sense to some level.
For option A,trees can only move while bacteria and humans can both move and locomote so there's that similarity
For option B,humans and plants are not micro organisms but bacteria are so there's that similarity
Option C is just not true
Option D is the right answer thus both humans and animals are eukaryotes
how many helium atoms are in a mole of helium?
Answer:1 mole of helium gas contains 6.02 x1023 helium atoms
Explanation:I hope this helps
1. What was the mass of a sample of water if the addition of 4280 joules raised the temperature of the sample from 22.00C to 34.50C?
2. What is the specific heat of a sample of an alloy if 3750 joules of heat are released when a 315 gram sample of alloy cools from 78.00C to 28.40C?
3. The specific heat of iron is 0.448 J/g0C. What will be the final temperature if 35000 joules of heat are added to a 454 gram sample of iron at 24.00C?
4. What will be the final temperature when 8750 joules are added to 75.0 grams of water at 23.00C?
5. When 38800 joules were added to a sample of iron, specific heat 0.448 J/g0C, the temperature rose from 24.5 deg C to 178 deg C. What was the mass of the iron sample?
Explanation:
Number 1
Q = 4280J
mass = x
∆∅ = 34.5 - 22
∆∅ = 12.5°C
Specific heat capacity of water = 4200J
Q = mc∆∅
4280 = x(4200)(12.5)
4280 = 52500x
x = 4280/52500
x = 0.0815kg
Number 2
c = x
Q = 3750
m = 315g
∆∅ = 78 - 28.4
∆∅ = 49.6°C
Q = mc∆∅
3750 = 315×x×49.6
3750 = 15624x
x = 3750/15624
x = 0.2400J(g°C)-¹
Number 3
c = 0.448
Q = 35000
m = 454g
∆∅ = x
Q = mc∆∅
35000 = 454(0.448)(x)
35000 = 203.392x
x = 35000/203.392
x = 172.0815
∅2 - ∅1 = ∆∅
∅2 = ∆∅ + ∅1
∅2 = 172.0815 + 24
∅2 = 196.0815
∅2 = 196°C
Number 4
Q = 8750J
m = 75g = 0.075
c = 4200J/kg/°C
∆∅ = x
Q = mc∆∅
8750 = 0.075(4200)∆∅
8750 = 315×x
x = 8750/315
x = 27.7778
∅2 - ∅1 = 27.7778
∅2 = 27.7778 + ∅1
∅2 = 27.7778 + 23
∅2 = 50.7778
∅2 = 50.8°C
Number 5
Q = 38800J
c = 0.448J/(g°C)
∆∅ = 178 - 24.5
∆∅ = 153.5°C
m = x
Q = mc∆∅
38800 = x × 0.448 × 153.5
38800 = 68.768x
x = 38800/68.768
x = 564.2159
x = 564g
Due tonight! Please help!
Please show your work and don’t spam or delete answers
I will mark Brainliest!
Calculate the concentration in grams per liter of a 450.0 mL solution containing
0.0762 moles of iodine gas (I2)
Answer:
42.98 g/L
Explanation: