Answer:
Question: Find out more about either one of these forms of energy
Answer:
Solar energy: This is energy generated from the sunlight, and it can be converted to other energy that can be useful. Solar energy from the sun considered a clean source of electricity can be converted to a usable electricity source or stores the light in batteries for thermal use. This energy conversion is possible through the use of solar panels attached to where the conversion would take place so as to capture the light from the sun.
Question: What is being done to make it a more efficient source of energy
Answer:
1. When using solar energy to power homes, it is more efficient to have panels on a green roof because of the characteristics of this roof not to reflect or lose more light from the sun.
2. Improvements on the type of solar cell to use for instance that are cheaper and could maximize the energy from the sun are all ways that make it more efficient.
3. Since solar panels don't produce energy at night, usage of batteries that could store electricity during the day or when the sun is not obscured would make solar more efficient.
Question: where it is being used in the United States?
Answer:
1. California
2. Nevada
3. New York
4. Texas
Your 1500kg car is stuck behind a truck traveling 27 m/s. To pass it, you speed up to 34 m/s in
6.0 s. What power is required to do this?
Answer:
P = 53375[W]
Explanation:
First, we must use the following equation of kinematics, which allows us to calculate the acceleration value.
[tex]v_{f}=v_{o}+a*t[/tex]
where:
Vf = final velocity = 34 [m/s]
Vo = initial velocity = 27 [m/s]
a = acceleration [m/s²]
t = time = 6 [s]
Now replacing:
[tex]34=27+a*6\\a=1.167[m/s^{2} ][/tex]
Now we must use Newton's second law, which tells us that the sum of forces is equal to the product of mass by acceleration. In this way, we have the following equation.
ΣF =m*a
where:
F = force [N]
m = mass = 1500 [kg]
a = acceleration = 1.167 [m/s²]
[tex]F=1500*1.167\\F=1750[N][/tex]
Power is defined as the product of force by speed. But we have two speeds, the initial and the final. We must use the average speed to be able to estimate the power needed.
[tex]V_{average}=\frac{34+27}{2} =30.5[m/s][/tex]
And the power:
[tex]P=F*V_{average}\\P=1750*30.5\\P=53375[W][/tex]
Spiderman has a mass of 80 kg. He knows his webbing will break if it is exposed to a 200 N force. What is the maximum height he can swing off of? You can assume aerodynamic forces prevent Spiderman from travelling greater than 30 m/s.
Answer:
This depends on the writers
if they want they can make spiderman deny the laws of nature
Timed! i would really appreciate some help! will try to mark brainliest!!!
For her birthday, Samantha gets a new bike. She wants all her friends to see and so begins riding up and down her street. What is her speed if she goes 40.5m in 8.6s? *
4.71 m/s
4.71 h/m
47.1 h/m
Answer:
4.71m/s
Explanation:
Given parameters:
Distance covered = 40.5m
Time taken = 8.6s
Unknown:
Speed = ?
Solution:
The speed of Samantha is the distance divided by the time taken.
Speed = [tex]\frac{Distance}{time}[/tex]
Now insert the parameters;
Speed = [tex]\frac{40.5}{8.6}[/tex] = 4.71m/s
Which of the following is true about myelin?
It inhibits neural communication.
O It cannot be affected by illness.
It is covered by axons.
It's a fatty insulation.
It slows down neuronal operations.
Answer:
It's a fatty insulation.
Explanation:
"Myelin" is a fatty substance which insulates the axons of the nerve cells. Therefore, it covers the axons. This makes choice A correct and choice C incorrect.
This allows faster neural communication or hastens the transmission of signals between neurons. This makes choice A incorrect and choice E incorrect. It doesn't inhibit neural communication nor does it slow down neuronal operation; rather, it increases both speed.
Myelin can be affected by illness. An example of this is the disease called "Multiple Sclerosis," which targets the myelin sheath.
which wave lies adjacent to the low frequency portion of the visible spectrum
a. gamma rays
b. infrared
c. x rays
d. ultraviolet rays
Answer: b. infrared
Explanation:
The visible light with the smaller frequency is associated with the color red.
While the blue is the one with the larger frequency.
Now, as the name says, infrared waves are the ones with a frequency just below the one of the red visible light.
Where the frequency of the red light is something around (4.3*10^14 Hz)
and the frequency of the infrared waves is in the range between (10^12 Hz and 10^14 Hz)
Then the correct option is b, infrared.
Ifa truck starts from rest and it has acceleration of 4 m/s for 5 second
calculate its final velocity. What will be the distance travelled by the track
during the time interval?
Answer:
Distance 50m
final velocity 20ms^-1
[tex]s = ut + \frac{1}{2} a {t}^{2} \\ = 0 \times t + \frac{1}{2} \times 4 \times {5}^{2} = 50m[/tex]
[tex]v = u + at \\ v = 0 + 4 \times 5 \\ v = 20ms^{ - 1} [/tex]
A student conducts an experiment in which an object travels across a horizontal surface while for 2 s a net force is applied to a 2 kg object that initially travels with a speed of 0.5 m/s. Data collected from the experiment are used to create the graph of the magnitude of the applied force exerted on the object as a function of time is shown. All frictional forces are considered to be negligible. Can the student use the graph and the known data to determine the momentum of the object after the force has been applied?
Yes, because the average force exerted on the object can be used with the time interval of 2 s to determine the change in momentum of the object by using Δp⃗ =F⃗ Δt.
Yes, because the area bound by the best-fit line and the horizontal axis from 0 s to 2 s can be used to determine the change in momentum of the object.
No, because the data is too scattered to determine the average force that is exerted on the object.
No, because the student needs to know the direction that the force is applied to the object because the applied force will be in the same direction as the change in momentum of the object.
Answer:
D. No, because the student needs to know the direction that the force is applied
Explanation:
The change in momentum depends on the direction of the force as well as its magnitude. Since the graph only supplies force magnitude information, it is insufficient to allow the student to calculate the change in momentum.
Which 2 statements correctly describes the theory of plate tectonics?
Answer:
B and D
Explanation:
If it has letters.
A boy starts from point A and walks 3 meters toward the south, then turns around and walks 7 meters toward the north. What is the boys placement from point A?
Answer:
-3m+7m = 4m
Explanation:
As he walks south, he is going down 3m (-3m). Then he walks up 7m (+7m).
You subtract the final position from the initial position to get displacement.
7m - 3m = 4m
Urgent Important!!
Many medications have a warning to avoid driving because.
A. they haven't been scientifically tested yet.
B. they have been proven to cause drowsiness.
C. they want to cover all their bases.
Answer:
B) they have been proven to cause drowsiness
Explanation:
B is the only answer that makes sense, as the other answers do not make sense. All medications are scientifically tested before they can be used by someone. Covering their bases would show negligence and is bad.
Hope this helps!
PS, this is biology or medical, not physics.
10.0 points
When you drop a 0.38 kg apple, Earth exerts
a force on it that accelerates it at 9.8 m/s’ to-
Ward the earth's surface. According to New-
ton's third law, the apple must
exert an equal but opposite force on earth. If the mass of the Earth is 5.98 x 10^24 kg, what is the magnitude of the Earth’s acceleration towards the apple? Answer in units or m/s^2
Answer:
6.2 ×10^-25
Explanation:
Ma = mg
a = (m/M)g
[tex]a = \frac{0.38}{5.98 \times {10}^{24} } \times 9.8 = 6.2 \times {10}^{ - 25} [/tex]
While swimming the elementary backstroke your eyes should be looking directly at..
Answer:
the ceiling
Explanation:
i dont know man but thats what my swimming instructor said, but i havent swam in like 3 years so ..
What is the difference between a mechanical wave and an electromagnetic wave?
A mechanical wave travels through empty space, while an electromagnetic wave travels through matter.
A mechanical wave has a short wavelength, while all electromagnetic waves have long wavelengths.
A mechanical wave has a high frequency, while all electromagnetic waves have low frequencies.
A mechanical wave travels through matter, while an electromagnetic wave travels through empty space.
its regular chooiseing just decide one and tell me
Answer: A a mechanical wave travels through empty space, while an electromagnetic wave travels through matter.
Explanation: A mechanical wave travels through empty space, while an electromagnetic wave travels through matter. A mechanical wave has a short wavelength, while all electromagnetic waves have long wavelengths.
DEFINE SIGNIFICANT DIGITS.
Answer:
Significant figures are the number of digits in a value, often a measurement, that contribute to the degree of accuracy of the value. We start counting significant figures at the first non-zero digit. Calculate the number of significant figures for an assortment of numbers.
Explanation:
any of the digits of a number beginning with the digit farthest to the left that is not zero and ending with the last digit farthest to the right that is either not zero or that is a zero but is considered to be exact. — called also significant figure.
Question 4 of 20 :
Select the best answer for the question.
4. What do wire junctions on a schematic without a dot mean?
A. It's main circuit wiring.
B. The wires don't touch.
C. The wires are connected.
D. The schematic isn't finished.
Mark for review (Will be highlighted on the review page)
Moyt Ouestion >>
Answer:
b
Explanation:
A car engine has power than a horse because a car engine does the same amount of work in time. Yasmin and Raj each had 10 boxes of equal weight to stack next to each other on the same shelf, at the same height and in the same arrangement. Yasmin completed the task in 2 minutes, while Raj took 3 minutes to stack his boxes. Raj applied power than Yasmin because his stacking took time to do the same amount of work.
Answer:
A car engine has more power than a horse because a car engine does the same amount of work in time. Yasmin and Raj each had 10 boxes of equal weight to stack next to each other on the same shelf, at the same height and in the same arrangement. Yasmin completed the task in 2 minutes, while Raj took 3 minutes to stack his boxes. Raj applied less power than Yasmin because his stacking took more time to do the same amount of work.
Explanation:
A car engine has more power than a horse because a car engine does the same amount of work in less time. Raj applied less power than Yasmin because his stacking took more time to do the same amount of work.
What is power?The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.
Energy divided by time represents the dimension of power. The watt (W), which equates to one joule per second, is the unit of power in the International System of Units (SI).
Another popular unit of measurement is horsepower (hp), which is equivalent to a horse's power; one mechanical horsepower is equal to around 745.7 watts.
Learn more about power here:
https://brainly.com/question/29575208
#SPJ5
What is the net force acting on this cart ?
Explanation:
There is a force of 3N acting towards the left and 2 forces of 4N each acting towards the right.
Net force = (4N) + (4N) - (3N) = 5N towards the right.
P.S. We subtract the 3N force because the forces are in opposite directions.