Answer:
2.34
Explanation:
Like in a cat's eye, the human pupil changes shape in response to changes in
the environment. What is the most likely function of this structure?
A. To allow humans to read
B. To allow humans to see clearly in different levels of light
C. To allow humans to see shades in color
D. To allow humans to see at varying distances
Answer:
B.
Our pupils contract and expand depending on the amount of light at any given time in order to avoid being blinded and to see better in the darkness.
Trojans are _____.
a. asteroids which fall to the Earth
b. long-period comets
c. planets with ring systems
d. asteroids affected by Jupiter's gravity
Answer:
d. asteroids affected by Jupiter's gravity
Explanation:
A Trojan horse or Trojan is a type of malware that is often disguised as legitimate software. Trojans can be employed by cyber-thieves and hackers trying to gain access to users' systems. Users are typically tricked by some form of social engineering into loading and executing Trojans on their systems.
Answer:
D
Explanation:
D is the correct answer, they are planets that are close to the center star
What needs to be taken into consideration when increasing either the acid or base concentration in order to increase the buffering capacity of a solution?
The more concentrated the buffer solution, the greater its buffer capacity.
What is an acid?An acid is any substance that in water solution tastes sour, changes blue litmus paper to red, reacts with some metals to liberate hydrogen, reacts with bases to form salts, and promotes chemical reactions.
The more concentrated the buffer solution, the greater its buffer capacity.
If the buffer capacity is 10 times larger, then the buffer solution can absorb 10 times more strong acid or base before undergoing a significant change in pH.
Hence, we need to take this into consideration when increasing either the acid or base concentration in order to increase the buffering capacity of a solution.
Learn more about acid here:
https://brainly.com/question/3700851
#SPJ2
Step 8: Measuring the Volume of Air Near 80°C
Use tongs to put the beaker (with tube and
thermometer) on the hot plate.
Temperature of gas: ___ C
Height of the column of gas: ___ cm
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, height of Column of gas is 7.4cm and temperature of Gas is 82°C or 355 K.
What is matter?Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
So as we saw that matter has some mass so mass can be measured in gram only. Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. Height of Column of gas is 7.4cm and temperature of Gas is 82°Cor 355 K.
Therefore, height of Column of gas is 7.4cm and temperature of Gas is 82°C or 355 K.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ2
Answer:
Temperature of Gas: 83C Height of the column of gas: 7.4cm
Temperature of Gas: 355K Volume of Gas: 0.93cm^3
Explanation:
This was the answer that it gave me. I hope this helps. :)))
is pyramidal molecular geometry?
A. N2
B. H2O
C. NH3
D. CCL4
Answer:
[tex]\color{Blue}\huge\boxed{Question} [/tex]
Is pyramidal molecular geometry?[tex]\color{Blue}\huge\boxed{Answer} [/tex]
B.H2OHow many moles of water are produced from the reaction of 0.224 mol oxygen according to this equation? 2H2 + O2 -> 2H2O
Answer:
0.448 mols
Explanation:
Use balanced equation:
2H2 + O2 -> 2H2O
For every one mole of oxygen, there are two moles of water
hence the molar ratio 1:2
So if there are 0.224 mols of oxygen
Water = 0.224×2
Which is 0.448 mols of H20
Today, there are ____ GMO crops currently produced in the US.
A. 120
B. 10
C. 55
D. 1000
Answer: I think that is 55
Explanation: I hope I help
5. What physical property of foam makes it a good choice to
use in life vests?
A. Foam has a relative density less than water.
B. Foam is a good thermal insulator.
C Foam is non-magnetic.
D. Foam is soluble in water.
What is happening to the electrons between several atoms of Copper?
A.nothing happens to the electrons
B.the electrons become delocalized and form a "sea"
C.they are shared between two atoms
D.the electrons are transferred from one atom to another
Answer:
[tex]\color{Blue}\huge\boxed{Answer} [/tex]
B.the electrons become delocalized and form a "sea"
Please help with this one
Answer:
15g
Explanation:
hope this helped
how many grams of Na2SO4, (molar mass =142.0 g/mol) are there in 15 mL of 0.50 m Na2SO4 solution?
Answer:
1.1 g Na2SO4
Explanation:
First convert mL to L. Then multiply by the Molarity to get moles, then multiply by the molar mass to get grams.
15 mL x 1 L x 0.50 mol Na2SO4 x 142 g = 1.1 g
10^3 mL 1 L mol Na2SO4
In a formula unit, there are 48 gram of Na2SO4 atoms of each element. In terms of molar mass (gram mass unit): 45.98 g Na2SO4 in total 142.04 g sodium sulphate
How many moles of Na2SO4 are there?A mole of sodium sulphate is created when two moles of sodium (45.98 g), one mole of sulphur (32.06 g), and four moles of oxygen (64.00 g) are combined (142.04 g).
The atomic mass of sodium sulphite is equal to 10 moles times the molecular mass, or 1260 grams. Consequently, 1260 grams are the mass of 10 moles of sodium sulphite (Na2SO4).
We first obtain the atomic weights of the different elements in a periodic table in order to compute the molar mass of a molecule. Then, we multiply the total number of atoms by each one's atomic mass. Finally, we calculate the molar mass by combining all the atomic masses.
To learn more about Na2SO4 refer to:
https://brainly.com/question/3047839
#SPJ2
3 attempts left
Check my work
Enter your answer in the provided box.
The pressure inside a 1.0 L balloon at 25°C was 750 mm Hg. What is the pressure (in mmHg) inside the
balloon when it is cooled to -65°C and expands to 3.3 L in volume?
mm Hg
Answer:
shhsss×<×>×××<××××
Explanation:
4×738×8<#329×
What is the force being applied to an object with a mass of 12 KG and an acceleration of 4M/S
Answer:
48 newtons
Explanation:
One liter of helium gas has a mass of 2.3 grams at STP. True or false
Answer:
n=V/Vm
n=1/22.4
n=0.044 moles He
m=n×M
m=0.044×4
m=0.178 g False
Which of the following galaxies do not have a regular structure?
A. Elliptical and barred spiral galaxies
B. Irregular and elliptical galaxies
C. Spiral galaxies
D. Irregular galaxies
Answer: D
Explanation: Irregular galaxies
Answer:
Your answer is D
Explanation:
Irregular galaxies do not have a regular structure.
Given a volume of 47.8 mL of gas at STP, _______________ moles of O2 exist
An unknown compound was found to be soluble in concentrated sulfuric acid; however, the 2,4-DNP, chromic acid, and potassium permanganate gave negative results. The only positive result detected was the ferrous hydroxide test. What is the most likely functional group present in such compound
Explanation:
2,4-DNP is negative: aldehyde and ketone absent
Chromic acid is negative: alcohol absent.
KMnO4 test negative: alkene absent
The only positive result is for Fe(OH)2.
Nitro group-containing compounds react with ferrous hydroxide to give amine and ferric hydroxide red ppt. Hence given compound contains the nitro group (-NO2).
What is the molar mass of AlCl3
Answer:
133.34 g/moles
Explanation:
but to make life easy it could be 133.4 g/ moles as well
The combustion of coal, a fossil fuel, to produce electrical energy produces a by-product, sulfur dioxide, which is emitted into the atmosphere. Sulfur dioxide will mix with the components in the atmosphere to produce _____.
Forest Fires
Global warming
Acid Rain
Algae growing in ponds and lakes
How should I write balanced net ionic equation for this reaction?
0.10 M Cu(NO3)2 + 0.010 M Cu(NO3)2
Because they're the same compound, I'm not sure how to write a net ionic equation for them. Any help is appreciated!
Answer:
Explanation:
Assumptions
They would ionize completely, or you must assume that. The volumes must be the same as well.0.11M Cu(NO3)2 ===> 0.11MCu2+ + 0.22 NO3-Note
The concentrations would merely add. All things change if the assumptions I've made are not true.
Due today please answer! Can we better understand plastics by using Periodic Table?
Answer is in a photo. I can only upload it to a file hosting service. link below!
bit.[tex]^{}[/tex]ly/3a8Nt8n
Answer:
I think not
Explanation:
Plastics can be understand through the knowledge of its types and structure than periodic table.
Which of the following molecules has a bent shape?
O A. CO2
O B. H20
O C. BeCl2
O D. NH3
a 55g block of metal has a specific heat of 0.45 J/g°C. What will be the temperature change of this metal if 450 J of heat energy are added
Answer:
18.18C
Explanation: Write whats below to show your work :D
m=55
C=0.45
Q=450zj
ch.temp=?
Q=mct
450 = (55)(.45)T
450 = 24.75
/24.75 = /24.75 (cancels out)
18.18 is the answer
Hope this helps! did it with my teacher.
Please write the answer in format below
Answer:
0.95 L
Explanation:
Step 1: Given data
Concentration of the Mg(NO₃)₂ solution (C): 0.32 M (0.32 mol/L)
Mass of Mg(NO₃)₂ (solute): 45 g
Step 2: Calculate the moles corresponding to 45 g of Mg(NO₃)₂
The molar mass of Mg(NO₃)₂ is 148.33 g/mol.
45 g Mg(NO₃)₂ × 1 mol Mg(NO₃)₂ /148.33 g Mg(NO₃)₂ = 0.303 mol Mg(NO₃)₂
Step 3: Calculate the volume of solution that contains 0.303 moles of Mg(NO₃)₂
The concentration of the solution is 0.32 M, that is, there are 0.32 moles of Mg(NO₃)₂ per liter of solution.
0.303 mol Mg(NO₃)₂ × 1 L Solution / 0.32 mol Mg(NO₃)₂ = 0.95 L
the color of an object that absorbs all colors except red
Answer:
The color black absorbs most colors, while white reflects most colors.
What is the molarity (M) of a solution that has 0.50 moles of solute dissolved in 1.0
liter of solution?
Answer:
it is 0.50=0.5 M
Explanation:
Molarity definition is measure the concentration of solution.
and the rule is
molarity(M)= moles of solute/volume of solution in liters
Ex: 2.1 M MgCl2= 2.1 mole MgCl2/ L MgCl2 solution
Which type of formula shows an element symbol for each atom and a line for each bond between atoms?
structural
molecular
empirical
ionic
Answer: structural
Explanation:
When metals and non metals combine in fixed proportion then a chemical compound is formed. Structural formula shows an element symbol for each atom and a line for each bond between atoms. The correct option is option A.
What is chemical formula?Chemical formula is a formula where cation and anion combine to form a molecule in fixed proportion. Metals combine in form of cation and non metals combine in form of anion.
Cation is the species that give electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral.
Out of given structural is a 3D representation of any chemical formula, in which symbol of each element is shown .Along with symbol line for each bond between atoms is also shown.
Therefore, the correct option is option A.
To learn more about Chemical formula, here:
https://brainly.com/question/28522480
#SPJ2
Why is it expensive to bring electricity into urban areas?
Answer:
Power plants are not located in cities. Power has to travel a long distance over power lines to reach cities.
Explanation:
a wave machine creates ripples of water. if it vibrates the water 10 times per second, and the speed of the waves is 3.0 m/s, what is the wavelength?
Explanation is in a file
bit.[tex]^{}[/tex]ly/3a8Nt8n
How are compositional layers distinguished?
Explanation:
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layers
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition Depth
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicates
The Earth has different compositional and mechanical layers. Compositional layers are determined by their components, while mechanical layers are determined by their physical properties.Information about the compositional layersLayer Definition DepthCrust :The outermost solid layer of a rocky planet or natural satellite. Chemically distinct from the underlying mantle. 0-100km silicatesMantle :A layer of the Earth (or any planet large enough to support internal stratification) between the crust and the outer core. It is chemically distinct from the crust and the outer core. The mantle is not liquid. It is, however, ductile, or plastic, which means that on very long time scales and under pressure it can flow. The mantle is mainly composed of aluminum and silicates. 100-2900km iron and magnesium silicatesCore: The innermost layers of the Earth. The Earth has an outer core (liquid) and an inner core (solid). They are not chemically distinct from each other, but they are chemically distinct from the mantle. The core is mainly composed of nickel and iron. 2900-6370km meta