The ratio of the path radii for the uranium-238 ions is not affected by the accelerating voltage. The ratio is solely determined by the mass of the ions and the magnitude of the magnetic field.
The ratio of the path radii for singly charged uranium-238 ions depends on the accelerating voltage.
When a charged particle enters a uniform magnetic field perpendicular to its velocity, it experiences a force called the magnetic force. This force acts as a centripetal force, causing the particle to move in a circular path.
The magnitude of the magnetic force is given by the equation:
F = qvB
Where:
F is the magnetic force
q is the charge of the particle
v is the velocity of the particle
B is the magnitude of the magnetic field
In this case, the uranium-238 ions have a charge of +1 (since they are singly charged). The magnetic force acting on the ions is equal to the centripetal force:
qvB = mv²/r
Where:
m is the mass of the uranium-238 ion
v is the velocity of the ion
r is the radius of the circular path
We can rearrange this equation to solve for the radius:
r = mv/qB
The velocity of the ions can be determined using the equation for the kinetic energy of a charged particle:
KE = (1/2)mv²
The kinetic energy can also be expressed in terms of the accelerating voltage (V) and the charge (q) of the ion:
KE = qV
We can equate these two expressions for the kinetic energy:
(1/2)mv² = qV
Solving for v, we get:
v = sqrt(2qV/m)
Substituting this expression for v into the equation for the radius (r), we have:
r = m(sqrt(2qV/m))/qB
Simplifying, we get:
r = sqrt(2mV)/B
From this equation, we can see that the ratio of the path radii is independent of the charge (q) of the ions and the mass (m) of the ions.
Therefore, the ratio of the path radii is independent of the accelerating voltage (V).
Learn more about voltage
https://brainly.com/question/32002804
#SPJ11
Question 3 An average adult inhales a volume of 0.6 L of air with each breath. If the air is warmed from room temperature (20°C = 293 K) to body temperature (37°C = 310 K) while in the lungs, what is the volume of the air when exhaled? Provide the answer in 2 decimal places.
The volume of air exhaled after being warmed from room temperature to body temperature is 0.59 L.
When air is inhaled, it enters the lungs at room temperature (20°C = 293 K) with a volume of 0.6 L. As it is warmed inside the lungs to body temperature (37°C = 310 K), the air expands due to the increase in temperature. According to Charles's Law, the volume of a gas is directly proportional to its temperature, assuming constant pressure. Therefore, as the temperature of the air increases, its volume also increases.
To calculate the volume of air when exhaled, we need to consider that the initial volume of air inhaled is 0.6 L at room temperature. As it warms to body temperature, the volume expands proportionally. Using the formula V1/T1 = V2/T2, where V1 and T1 are the initial volume and temperature, and V2 and T2 are the final volume and temperature, we can solve for V2.
V1 = 0.6 L
T1 = 293 K
T2 = 310 K
0.6 L / 293 K = V2 / 310 K
Cross-multiplying and solving for V2, we get:
V2 = (0.6 L * 310 K) / 293 K
V2 = 0.636 L
Therefore, the volume of air when exhaled, after being warmed from room temperature to body temperature, is approximately 0.64 L.
Learn more about exhale:
brainly.com/question/31758301
#SPJ11
You fire a cannon horizontally off a 50 meter tall wall. The cannon ball lands 1000 m away. What was the initial velocity?
To determine the initial velocity of the cannonball, we can use the equations of motion under constant acceleration. The initial velocity of the cannonball is approximately 313.48 m/s.
Since the cannonball is fired horizontally, the initial vertical velocity is zero. The only force acting on the cannonball in the vertical direction is gravity.
The vertical motion of the cannonball can be described by the equation h = (1/2)gt^2, where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time of flight.
Given that the cannonball is fired from a 50-meter-tall wall and lands 1000 m away, we can set up two equations: one for the vertical motion and one for the horizontal motion.
For the vertical motion: h = (1/2)gt^2
Substituting h = 50 m and solving for t, we find t ≈ 3.19 s.
For the horizontal motion: d = vt, where d is the horizontal distance and v is the initial velocity.
Substituting d = 1000 m and t = 3.19 s, we can solve for v: v = d/t ≈ 313.48 m/s.
Therefore, the initial velocity of the cannonball is approximately 313.48 m/s.
Learn more about initial velocity here; brainly.com/question/31023940
#SPJ11
Two blocks with equal mass m are connected by a massless string and then,these two blocks hangs from a ceiling by a spring with a spring constant as
shown on the right. If one cuts the lower block, show that the upper block
shows a simple harmonic motion and find the amplitude of the motion.
Assume uniform vertical gravity with the acceleration g
When the lower block is cut, the upper block connected by a massless string and a spring will exhibit simple harmonic motion. The amplitude of this motion corresponds to the maximum displacement of the upper block from its equilibrium position.
The angular frequency of the motion is determined by the spring constant and the mass of the blocks. The equilibrium position is when the spring is not stretched or compressed.
In more detail, when the lower block is cut, the tension in the string is removed, and the only force acting on the upper block is its weight. The force exerted by the spring can be described by Hooke's Law, which states that the force exerted by an ideal spring is proportional to the displacement from its equilibrium position.
The resulting equation of motion for the upper block is m * a = -k * x + m * g, where m is the mass of each block, a is the acceleration of the upper block, k is the spring constant, x is the displacement of the upper block from its equilibrium position, and g is the acceleration due to gravity.
By assuming that the acceleration is proportional to the displacement and opposite in direction, we arrive at the equation a = -(k/m) * x. Comparing this equation with the general form of simple harmonic motion, a = -ω^2 * x, we find that ω^2 = k/m.
Thus, the angular frequency of the motion is given by ω = √(k/m). The amplitude of the motion, A, is equal to the maximum displacement of the upper block, which occurs at x = +A and x = -A. Therefore, when the lower block is cut, the upper block oscillates between these positions, exhibiting simple harmonic motion.
Learn more about Harmonic motion here :
brainly.com/question/30404816
#SPJ11
Protein centrifugation is a technique commonly used to separate proteins according to size. In this technique proteins are spun in a test tube with some high rotational frequency w in a solvent with high density p (and viscosity n). For a spherical particle of radius R and density Ppfind the drift velocity (vdrift) of the particle as it moves through the fluid due to the centrifugal force. Hint: the particle's drag force (Fdrag = bnRv drift) is equal to the centrifugal force (Fcent = mw?r, where r is the molecule's distance from the rotation axis).
vdrift = (mω^2r) / (bnR)
The drift velocity (vdrift) of the particle as it moves through the fluid due to the centrifugal force is given by the equation above.
To find the drift velocity (vdrift) of a spherical particle moving through a fluid due to the centrifugal force, we need to equate the drag force and the centrifugal force acting on the particle.
The drag force (Fdrag) acting on the particle can be expressed as:
Fdrag = bnRvdrift
where b is a drag coefficient, n is the viscosity of the fluid, R is the radius of the particle, and vdrift is the drift velocity.
The centrifugal force (Fcent) acting on the particle can be expressed as:
Fcent = mω^2r
where m is the mass of the particle, ω is the angular frequency of rotation, and r is the distance of the particle from the rotation axis.
Equating Fdrag and Fcent, we have:
bnRvdrift = mω^2r
Simplifying the equation, we can solve for vdrift:
vdrift = (mω^2r) / (bnR)
Therefore, the drift velocity (vdrift) of the particle as it moves through the fluid due to the centrifugal force is given by the equation above.
Learn more about centrifugal force:
https://brainly.com/question/954979
#SPJ11
A diverging lens has a focal length of magnitude 16.0 cm. (a) Locate the images for each of the following object distances. 32.0 cm distance cm location ---Select--- 16.0 cm distance cm location ---Select--- V 8.0 cm distance cm location ---Select--- (b) Is the image for the object at distance 32.0 real or virtual? O real O virtual Is the image for the object at distance 16.0 real or virtual? O real O virtual Is the image for the object at distance 8.0 real or virtual? Oreal O virtual (c) Is the image for the object at distance 32.0 upright or inverted? O upright O inverted Is the image for the object at distance 16.0 upright or inverted? upright O inverted Is the image for the object at distance 8.0 upright or inverted? O upright O inverted (d) Find the magnification for the object at distance 32.0 cm. Find the magnification for the object at distance 16.0 cm. Find the magnification for the object at distance 8.0 cm.
Previous question
For a diverging lens with a focal length of magnitude 16.0 cm, the image locations for object distances of 32.0 cm, 16.0 cm, and 8.0 cm are at 16.0 cm, at infinity (virtual), and beyond 16.0 cm (virtual), respectively. The images for the object distances of 32.0 cm and 8.0 cm are virtual, while the image for the object distance of 16.0 cm is real. The image for the object distance of 32.0 cm is inverted, while the images for the object distances of 16.0 cm and 8.0 cm are upright. The magnification for the object at 32.0 cm is -0.5, for the object at 16.0 cm is -1.0, and for the object at 8.0 cm is -2.0.
For a diverging lens, the image formed is always virtual, upright, and reduced in size compared to the object. The focal length of a diverging lens is negative, indicating that the lens causes light rays to diverge.
(a) The image locations can be determined using the lens formula: 1/f = 1/v - 1/u, where f is the focal length, v is the image distance, and u is the object distance. Plugging in the given focal length of 16.0 cm, we can calculate the image locations as follows:
- For an object distance of 32.0 cm, the image distance (v) is calculated to be 16.0 cm.
- For an object distance of 16.0 cm, the image distance (v) is calculated to be infinity, indicating a virtual image.
- For an object distance of 8.0 cm, the image distance (v) is calculated to be beyond 16.0 cm, also indicating a virtual image.
(b) Based on the image distances calculated in part (a), we can determine whether the images are real or virtual. The image for the object distance of 32.0 cm is real because the image distance is positive. The images for the object distances of 16.0 cm and 8.0 cm are virtual because the image distances are negative.
(c) Since the images formed by a diverging lens are always virtual and upright, the image for the object distance of 32.0 cm is upright, while the images for the object distances of 16.0 cm and 8.0 cm are also upright.
(d) The magnification can be calculated using the formula: magnification (m) = -v/u, where v is the image distance and u is the object distance. Substituting the given values, we find:
- For the object distance of 32.0 cm, the magnification (m) is -0.5.
- For the object distance of 16.0 cm, the magnification (m) is -1.0.
- For the object distance of 8.0 cm, the magnification (m) is -2.0.
Learn more about diverging lens here:
https://brainly.com/question/28348284
#SPJ11
a heat engine exhausts 22,000 J of energy to the envioement while operating at 46% efficiency.
1. what is the heat input?
2. this engine operates at 68% of its max efficency. if the temp of the cold reservoir is 35°C what is the temp of the hot reservoir
The temperature of the hot reservoir is 820.45°C.Given data:Amount of energy exhausted, Q
out = 22,000 J
Efficiency, η = 46%1. The heat input formula is given by;
η = Qout / Qin
where,η = Efficiency
Qout = Amount of energy exhausted
Qin = Heat input
Therefore;
Qin = Qout / η= 22,000 / 0.46= 47,826.09 J2.
The efficiency of the engine at 68% of its maximum efficiency is;
η = 68% / 100%
= 0.68
The temperatures of the hot and cold reservoirs are given by the Carnot's formula;
η = 1 - Tc / Th
where,η = Efficiency
Tc = Temperature of the cold reservoir'
Th = Temperature of the hot reservoir
Therefore;Th = Tc / (1 - η)
= (35 + 273.15) K / (1 - 0.68)
= 1093.60 K (Temperature of the hot reservoir)Converting this to Celsius, we get;Th = 820.45°C
Therefore, the temperature of the hot reservoir is 820.45°C.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
A horizontal wire of length 3.0 m carries a current of 6.0 A and is oriented so that the current direction is 50 ∘ S of W. The Earth's magnetic field is due north at this point and has a strength of 0.14×10 ^−4 T. What are the magnitude and direction of the force on the wire? 1.9×10 N ^−4 , out of the Earth's surface None of the choices is correct. 1.6×10 N ^−4 , out of the Earth's surface 1.9×10 N ^−4 , toward the Earth's surface 1.6×10 N ^−4 , toward the Earth's surface
The magnitude of the force on the wire is 1.9 × 10⁻⁴ N. The direction of the current is 50° south of the west. 1.9×10 N⁻⁴, out of the Earth's surface is the correct option.
Length of the horizontal wire, L = 3.0 m
Current flowing through the wire, I = 6.0 A
Earth's magnetic field, B = 0.14 × 10⁻⁴ T
Angle made by the current direction with due west = 50° south of westForce on a current-carrying wire due to the Earth's magnetic field is given by the formula:
F = BILsinθ, where
L is the length of the wire, I is the current flowing through it, B is the magnetic field strength at that location and θ is the angle between the current direction and the magnetic field direction
Magnitude of the force on the wire is
F = BILsinθF = (0.14 × 10⁻⁴ T) × (6.0 A) × (3.0 m) × sin 50°F = 1.9 × 10⁻⁴ N
Earth's magnetic field is due north, the direction of the force on the wire is out of the Earth's surface. Therefore, the correct option is 1.9×10 N⁻⁴, out of the Earth's surface.
You can learn more about magnitude at: brainly.com/question/31022175
#SPJ11
Diamagnets have the property that they "dampen" the effects of an external magnetic field by creating an opposing magnetic field. The diamagnet thus has an induced dipole moment that is anti-aligned, such that the induced north pole is closer to the north pole creating the external field. An application of this is that diamagnets can be levitated (Links to an external site.).
Now, the mathematics of generally describing a force by a non-uniform field on a dipole is a little beyond the scope of this course, but we can still work through an approximation based on energy. Essentially, whenever the theoretical loss of gravitational potential energy from "falling" no longer can "pay the cost" of increasing the magnetic potential energy, the object no longer wants to fall.
Suppose a diamagnetic object floats above the levitator where the magnitude of the magnetic field is 18 T, which is inducing* a magnetic dipole moment of 3.2 μA⋅m2 in the object. The magnetic field 2.0 mm below the object is stronger with a magnitude of 33 T. What is the approximate mass of the floating object?
Give your answer in units of g (i.e., x10-3 kg), and use g = 9.81 m/s2. You may assume the object's size is negligible.
The approximate mass of the floating object is approximately 37.99 grams.
To solve this problem, we can use the concept of potential energy. When the diamagnetic object floats above the levitator, the gravitational potential energy is balanced by the increase in magnetic potential energy.
The gravitational potential energy is by the formula:
[tex]PE_gravity = m * g * h[/tex]
where m is the mass of the object, g is the acceleration due to gravity, and h is the height from the reference point (levitator) to the object.
The magnetic potential energy is by the formula:
[tex]PE_magnetic = -μ • B[/tex]
where μ is the magnetic dipole moment and B is the magnetic field.
In equilibrium, the gravitational potential energy is equal to the magnetic potential energy:
[tex]m * g * h = -μ • B[/tex]
We can rearrange the equation to solve for the mass of the object:
[tex]m = (-μ • B) / (g • h)[/tex]
Magnetic dipole moment [tex](μ) = 3.2 μA⋅m² = 3.2 x 10^(-6) A⋅m²[/tex]
Magnetic field above the object (B1) = 18 T
Magnetic field below the object (B2) = 33 T
Height (h) =[tex]2.0 mm = 2.0 x 10^(-3) m[/tex]
Acceleration due to gravity (g) = 9.81 m/s²
Using the values provided, we can calculate the mass of the floating object:
[tex]m = [(-3.2 x 10^(-6) A⋅m²) • (18 T)] / [(9.81 m/s²) • (2.0 x 10^(-3) m)][/tex]
m = -0.03799 kg
To convert the mass to grams, we multiply by 1000:
[tex]m = -0.03799 kg * 1000 = -37.99 g[/tex]
Since mass cannot be negative, we take the absolute value:
m ≈ 37.99 g
Therefore, the approximate mass of the floating object is approximately 37.99 grams.
Learn more about gravitational potential energy from the given link
https://brainly.com/question/15896499
#SPJ11
13-1 4 pts Calculate the power delivered to the resistor R= 2.3 in the figure. 2.0 £2 www 50 V 4.0 Ω 20 V W (± 5 W) Source: Serway and Beichner, Physics for Scientists and Engineers, 5th edition, Problem 28.28. 4.0 52 R
The power delivered to resistor R of resistance 2.3 ohms and across which a potential difference of 20 V is applied is 173.91 W.
The given circuit diagram is shown below: We know that the power delivered to a resistor R of resistance R and across which a potential difference of V is applied is given by the formula:
P=V²/R {Power formula}Given data:
Resistance of the resistor, R= 2.3
Voltage, V=20 V
We can apply the above formula to the given data and calculate the power as follows:
P = V²/R⇒ P = (20)²/(2.3) ⇒ P = 173.91 W
Therefore, the power delivered to the resistor is 173.91 W.
From the given circuit diagram, we are supposed to calculate the power delivered to the resistor R of resistance 2.3 ohms and across which a potential difference of 20 V is applied. In order to calculate the power delivered to the resistor, we need to use the formula:
P=V²/R, where, P is the power in watts, V is the potential difference across the resistor in volts, and R is the resistance of the resistor in ohms. By substituting the given values of resistance R and voltage V in the above formula, we get:P = (20)²/(2.3)⇒ P = 400/2.3⇒ P = 173.91 W. Therefore, the power delivered to the resistor is 173.91 W.
Therefore, we can conclude that the power delivered to resistor R of resistance 2.3 ohms and across which a potential difference of 20 V is applied is 173.91 W.
To know more about resistance visit
brainly.com/question/32301085
#SPJ11
The resistive force that occurs when the two surfaces do side across each other is known as _____
The resistive force that occurs when two surfaces slide across each other is known as friction.
Friction is the resistive force that opposes the relative motion or tendency of motion between two surfaces in contact. When one surface slides over another, the irregularities or microscopically rough surfaces of the materials interact and create resistance.
This resistance is known as friction. Friction occurs due to the intermolecular forces between the atoms or molecules of the surfaces in contact.
The magnitude of friction depends on factors such as the nature of the materials, the roughness of the surfaces, and the normal force pressing the surfaces together. Friction plays a crucial role in everyday life, affecting the motion of objects, enabling us to walk, drive vehicles, and control the speed of various mechanical systems.
To learn more about resistive force
Click here brainly.com/question/30526425
#SPJ11
Solve the following word problems showing all the steps
math and analysis, identify variables, equations, solve and answer
in sentences the answers.
A ship traveling west at 9 m/s is pushed by a sea current.
which moves it at 3m/s to the south. Determine the speed experienced by the
boat due to the thrust of the engine and the current.
A ship is traveling west at a speed of 9 m/s.The sea current moves the ship to the south at a speed of 3 m/s. Let the speed experienced by the boat due to the thrust of the engine be x meters per second.
Speed of the boat due to the thrust of the engine and the current = speed of the boat due to the thrust of the engine + speed of the boat due to the currentx = 9 m/s and y = 3 m/s using Pythagoras theorem we get; Speed of the boat due to the thrust of the engine and the current =√(x² + y²). Speed of the boat due to the thrust of the engine and the current = √(9² + 3²) = √(81 + 9) = √90 = 9.4868 m/s. Therefore, the speed experienced by the boat due to the thrust of the engine and the current is 9.4868 m/s.
Learn more about speed:
brainly.com/question/13943409
#SPJ11
Problem no 9: Draw pendulum in two positions: - at the maximum deflection - at the point of equilibrium after pendulum is released from deflection Draw vectors of velocity and acceleration on both figures.
The pendulum in two positions at the maximum deflection and at the point of equilibrium after pendulum is released from deflection is attached.
What is a pendulum?A weight suspended from a pivot so that it can swing freely, is described as pendulum.
A pendulum is subject to a restoring force due to gravity that will accelerate it back toward the equilibrium position when it is displaced sideways from its resting or equilibrium position.
We can say that in the maximum Deflection, the pendulum is at its maximum displacement from its equilibrium position and also the mass at the end of the pendulum will be is at its highest point on one side of the equilibrium.
Learn more about a pendulum at:
https://brainly.com/question/27187715
#SPJ4
Assignment: Fluid Statics Fluid statics, or hydrostatics, studies fluids at rest. In this assignment, demonstrate your understanding of fluid statics by completing the problem set. Instructions Your task is to complete the questions below. Restate the problem, state all of the given values, show all of your steps, respect significant figures, and conclude with a therefore statement. Submit your work to the Dropbox when you are finished. Questions 1. You have three samples of substances. For each you know the mass and the volume. Find the names of the substances. (18 marks total) a. m = 195 g ; V = 25 cm? (6 marks) b. m = 10.5g ; V = 10 cm. (6 marks) c. m = 64.5 mg; V = 50.0 cm. (6 marks) 2. Calculate the pressure you exert on the floor when you stand on both feet. You may approximate the surface area of your shoes. Show all your work. (9 marks) 3. A car of mass 1.5 x 10kg is hoisted on the large cylinder of a hydraulic press. The area of the large piston is 0.20 m2, and the area of the small piston is 0.015 m2. (13 marks total) a. Calculate the magnitude of the force of the small piston needed to raise the car with slow speed on the large piston. (8 marks) b. Calculate the pressure, in Pascals and Kilopascals, in this hydraulic press. (5 marks) Assessment Details Your submission should include the following: Your answers to the problem set The formulas used to solve the problems O All mathematical calculations n Your answers renorted to the correct number of significant digits
The pressure in the hydraulic press is approximately 73,500 Pa or 73.5 kPa.
Given:
a. m = 195 g, V = 25 cm³
b. m = 10.5 g, V = 10 cm³
c. m = 64.5 mg, V = 50.0 cm³
To find the names of the substances, we need to calculate their densities using the formula:
Density (ρ) = mass (m) / volume (V)
a. Density (ρ) = 195 g / 25 cm³ = 7.8 g/cm³
The density of the substance is 7.8 g/cm³.
b. Density (ρ) = 10.5 g / 10 cm³ = 1.05 g/cm³
The density of the substance is 1.05 g/cm³.
c. Density (ρ) = 64.5 mg / 50.0 cm³ = 1.29 g/cm³
The density of the substance is 1.29 g/cm³.
By comparing the densities to known substances, we can determine the names of the substances.
a. The substance with a density of 7.8 g/cm³ could be aluminum.
b. The substance with a density of 1.05 g/cm³ could be wood.
c. The substance with a density of 1.29 g/cm³ could be water.
Therefore:
a. The substance with m = 195 g and V = 25 cm³ could be aluminum.
b. The substance with m = 10.5 g and V = 10 cm³ could be wood.
c. The substance with m = 64.5 mg and V = 50.0 cm³ could be water.
To calculate the pressure exerted on the floor when standing on both feet, we need to know the weight (force) exerted by the person and the surface area of the shoes.
Given:
Weight exerted by the person = ?
Surface area of shoes = ?
Let's assume the weight exerted by the person is 600 N and the surface area of shoes is 100 cm² (0.01 m²).
Pressure (P) = Force (F) / Area (A)
P = 600 N / 0.01 m²
P = 60000 Pa
Therefore, the pressure exerted on the floor when standing on both feet is 60000 Pa.
Given:
Mass of the car (m) = 1.5 x 10³ kg
Area of the large piston (A_large) = 0.20 m²
Area of the small piston (A_small) = 0.015 m²
a. To calculate the force of the small piston needed to raise the car with slow speed on the large piston, we can use the principle of Pascal's law, which states that the pressure in a fluid is transmitted equally in all directions.
Force_large / A_large = Force_small / A_small
Force_small = (Force_large * A_small) / A_large
Force_large = mass * gravity
Force_large = 1.5 x 10³ kg * 9.8 m/s²
Force_small = (1.5 x 10³ kg * 9.8 m/s² * 0.015 m²) / 0.20 m²
Force_small ≈ 11.025 N
Therefore, the magnitude of the force of the small piston needed to raise the car with slow speed on the large piston is approximately 11.025 N.
b. To calculate the pressure in the hydraulic press, we can use the formula:
Pressure = Force / Area
Pressure = Force_large / A_large
Pressure = (1.5 x 10³ kg * 9.8 m/s²) / 0.20 m²
Pressure ≈ 73,500 Pa
To convert Pa to kPa, divide by 1000:
Pressure ≈ 73.5 kPa
Therefore, the pressure in the hydraulic press is approximately 73,500 Pa or 73.5 kPa.
Learn more about Fluid Statics Fluid statics here-
brainly.com/question/33297314
#SPJ11
When one person shouts at a football game, the sound intensity level at the center of the field is 60.8 dB. When all the people shout together, the intensity level increases to 88.1 dB. Assuming that each person generates the same sound intensity at the center of the field, how many people are at the game?
Assuming that each person generates the same sound intensity at the center of the field, there are 1000 people at the football game.
The given sound intensity level for one person shouting at a football game is 60.8 dB and for all the people shouting together, the intensity level is 88.1 dB.
Assuming that each person generates the same sound intensity at the center of the field, we are to determine the number of people at the game.
I = P/A, where I is sound intensity, P is power and A is area of sound waves.
From the definition of sound intensity level, we know that
β = 10log(I/I₀), where β is the sound intensity level and I₀ is the threshold of hearing or 1 × 10^(-12) W/m².
Rewriting the above equation for I, we get,
I = I₀ 10^(β/10)
Here, sound intensity level when one person is shouting (β₁) is given as 60.8 dB.
Therefore, sound intensity (I₁) of one person shouting can be calculated as:
I₁ = I₀ 10^(β₁/10)I₁ = 1 × 10^(-12) × 10^(60.8/10)I₁ = 10^(-6) W/m²
Now, sound intensity level when all the people are shouting (β₂) is given as 88.1 dB.
Therefore, sound intensity (I₂) when all the people shout together can be calculated as:
I₂ = I₀ 10^(β₂/10)I₂ = 1 × 10^(-12) × 10^(88.1/10)I₂ = 10^(-3) W/m²
Let's assume that there are 'n' number of people at the game.
Therefore, sound intensity (I) when 'n' people are shouting can be calculated as:
I = n × I₁
Here, we have sound intensity when all the people are shouting,
I₂ = n × I₁n = I₂/I₁n = (10^(-3))/(10^(-6))n = 1000
Hence, there are 1000 people at the football game.
Learn more about sound intensity https://brainly.com/question/14349601
#SPJ11
A car is placed on a hydraulic lift. The car has a mass of 1598 kg. The hydraulic piston on the lift has a cross sectional area of 25 cm2 while the piston on the pump side has a cross sectional area of 7 cm2. How much force in Newtons is needed
on the pump piston to lift the car?
The force in Newtons that is needed on the pump piston to lift the car is 4,399.69 N.
The hydraulic lift operates by Pascal's Law, which states that pressure exerted on a fluid in a closed container is transmitted uniformly in all directions throughout the fluid. Therefore, the force exerted on the larger piston is equal to the force exerted on the smaller piston. Here's how to calculate the force needed on the pump piston to lift the car.
Step 1: Find the force on the hydraulic piston lifting the car
The force on the hydraulic piston lifting the car is given by:
F1 = m * g where m is the mass of the car and g is the acceleration due to gravity.
F1 = 1598 kg * 9.81 m/s²
F1 = 15,664.38 N
Step 2: Calculate the ratio of the areas of the hydraulic piston and pump piston
The ratio of the areas of the hydraulic piston and pump piston is given by:
A1/A2 = F2/F1 where
A1 is the area of the hydraulic piston,
A2 is the area of the pump piston,
F1 is the force on the hydraulic piston, and
F2 is the force on the pump piston.
A1/A2 = F2/F1A1 = 25 cm²A2 = 7 cm²
F1 = 15,664.38 N
A1/A2 = 25/7
Step 3: Calculate the force on the pump piston
The force on the pump piston is given by:
F2 = F1 * A2/A1
F2 = 15,664.38 N * 7/25
F2 = 4,399.69 N
Therefore, the force needed on the pump piston to lift the car is 4,399.69 N (approximately).Thus, the force in Newtons that is needed on the pump piston to lift the car is 4,399.69 N.
Learn more about force https://brainly.com/question/12785175
#SPJ11
A larger number of pixels per unit area, which produces superior picture quality, defines high resolution. Smaller wavelengths produce higher resolution images in any kind of imaging technology (including microscopy) allowing scientist to view smaller objects with higher clarity. Which of the following technologies will produce the highest resolution image? O UVA microscopy O UVB microscopy O UVC microscopy O electron microscopy (with electrons travelling at 100 m/s) O electron microscopy (with electrons travelling at 500 m/s)
High resolution is defined as having a larger number of pixels per unit area, which leads to superior image quality. Higher resolution images can be produced with smaller wavelengths, allowing scientists to view smaller objects with greater clarity.
Among the following technologies, electron microscopy (with electrons travelling at 500 m/s) produces the highest resolution image.Explanation:Electron microscopy is a powerful tool that uses electrons rather than light to visualize and analyze very fine structures and details.
Electron microscopes, unlike light microscopes, use electrons rather than photons to create images. Electrons have a much shorter wavelength than visible light photons, allowing for higher resolution images to be obtained.
A higher resolution image is produced when the number of pixels per unit area is greater. Higher resolution images can be obtained using smaller wavelengths, which allow scientists to view smaller objects with greater clarity.
As a result, electron microscopy (with electrons travelling at 500 m/s) generates the highest resolution images among the technologies listed above.
To know more about number visit;
brainly.com/question/3589540
#SPJ11
A patient of mass X kilograms is spiking a fever of 105 degrees F. It is imperative to reduce
the fever immediately back down to 98.6 degrees F, so the patient is immersed in an ice bath. How much ice must melt for this temperature reduction to be achieved? Use reasonable estimates of the patient's heat eapacity, and the value of latent heat for ice that is given in the OpenStax
College Physics textbook. Remember, convert temperature from Fahrenheit to Celsius or Kelvin.
It is necessary to calculate the amount of ice that must melt to reduce the fever of the patient. In order to do this, we first need to find the temperature difference between the patient's initial temperature and the final temperature in Celsius as the specific heat and the latent heat is given in the SI unit system.
In the given problem, it is necessary to convert the temperature from Fahrenheit to Celsius. Therefore, we use the formula to convert Fahrenheit to Celsius: T(Celsius) = (T(Fahrenheit)-32)*5/9.Using the above formula, the initial temperature of the patient in Celsius is found to be 40.6 °C (approx) and the final temperature in Celsius is found to be 37 °C.Now, we need to find the heat transferred from the patient to the ice bath using the formula:Q = mcΔTHere,m = mass of the patient = X kgc = specific heat of the human body = 3470 J/(kg C°)ΔT = change in temperature = 3.6 C°Q = (X) * (3470) * (3.6)Q = 44.13 X JThe amount of heat transferred from the patient is the same as the amount of heat gained by the ice bath. This heat causes the ice to melt.
Let the mass of ice be 'm' kg and the latent heat of fusion of ice be L = 3.34 × 105 J/kg. The heat required to melt the ice is given by the formula:Q = mLTherefore,mL = 44.13 X Jm = 44.13 X / L = 0.1321 X kgThus, 0.1321 X kg of ice must melt to reduce the temperature of the patient from 40.6 °C to 37 °C.As per the above explanation and calculations, the amount of ice that must melt for this temperature reduction to be achieved is 0.1321 X kg.
To know more about SI unit system visit:
https://brainly.com/question/9496237
#SPJ11
An evacuated tube uses an accelerating voltage of 31.1 KV to accelerate electrons from rest to hit a copper plate and produce x rays. Non-relativistically, what would be the speed of these electrons?
An evacuated tube uses an accelerating voltage of 31.1 KV to accelerate electrons from rest to hit a copper plate and produce x rays.velocity^2 = (2 * 31,100 V * (1.6 x 10^-19 C)) / (mass)
To find the speed of the electrons, we can use the kinetic energy formula:
Kinetic energy = (1/2) * mass * velocity^2
In this case, the kinetic energy of the electrons is equal to the work done by the accelerating voltage.
Given that the accelerating voltage is 31.1 kV, we can convert it to joules by multiplying by the electron charge:
Voltage = 31.1 kV = 31.1 * 1000 V = 31,100 V
The work done by the voltage is given by:
Work = Voltage * Charge
Since the charge of an electron is approximately 1.6 x 10^-19 coulombs, we can substitute the values into the formula:
Work = 31,100 V * (1.6 x 10^-19 C)
Now we can equate the work to the kinetic energy and solve for the velocity of the electrons:
(1/2) * mass * velocity^2 = 31,100 V * (1.6 x 10^-19 C)
We know the mass of an electron is approximately 9.11 x 10^-31 kg.
Solving for velocity, we have:
velocity^2 = (2 * 31,100 V * (1.6 x 10^-19 C)) / (mass)
Finally, we can take the square root to find the speed of the electrons.
To know more about accelerating refer here:
https://brainly.com/question/32899180#
#SPJ11
Two forces act on a body of 4.5 kg and displace it by 7.4 m. First force is of 9.6 N making an angle 185° with positive x-axis whereas the second force is 8.0 N making an angle of 310°. Find the net work done by these forces. Answer: Choose... Check
the net work done by the given forces is approximately -15.54 J, or -15.5 J (rounded to one decimal place).-15.5 J.
In physics, work is defined as the product of force and displacement. The unit of work is Joule, represented by J, and is a scalar quantity. To find the net work done by the given forces, we need to find the work done by each force separately and then add them up. Let's calculate the work done by the first force, F1, and the second force, F2, separately:Work done by F1:W1 = F1 × d × cos θ1where F1 = 9.6 N (force), d = 7.4 m (displacement), and θ1 = 185° (angle between F1 and the positive x-axis)W1 = 9.6 × 7.4 × cos 185°W1 ≈ - 64.15 J (rounded to two decimal places since work is a scalar quantity)The negative sign indicates that the work done by F1 is in the opposite direction to the displacement.Work done by F2:W2 = F2 × d × cos θ2where F2 = 8.0 N (force), d = 7.4 m (displacement), and θ2 = 310° (angle between F2 and the positive x-axis)W2 = 8.0 × 7.4 × cos 310°W2 ≈ 48.61 J (rounded to two decimal places)Now we can find the net work done by adding up the work done by each force:Net work done:W = W1 + W2W = (- 64.15) + 48.61W ≈ - 15.54 J (rounded to two decimal places)Therefore,
To know more aboutapproximately visit:
brainly.com/question/31360664
#SPJ11
quick answer
please
A 24-volt battery delivers current to the electric circuit diagrammed below. Find the current in the resistor, R3. Given: V = 24 volts, R1 = 120, R2 = 3.00, R3 = 6.0 0 and R4 = 10 R2 Ri R3 Ro a. 0.94
The current in resistor R3 is 0.94 amperes. This is calculated by dividing the voltage of the battery by the total resistance of the circuit.
The current in the resistor R3 is 0.94 amperes.
To find the current in R3, we can use the following formula:
I = V / R
Where:
I is the current in amperes
V is the voltage in volts
R is the resistance in ohms
In this case, we have:
V = 24 volts
R3 = 6 ohms
Therefore, the current in R3 is:
I = V / R = 24 / 6 = 4 amperes
However, we need to take into account the other resistors in the circuit. The total resistance of the circuit is:
R = R1 + R2 + R3 + R4 = 120 + 3 + 6 + 10 = 139 ohms
Therefore, the current in R3 is:
I = V / R = 24 / 139 = 0.94 amperes
Learn more about current here:
https://brainly.com/question/1220936
#SPJ4
What is the height of the shown 312.7 g Aluminum cylinder whose radius is 7.57 cm, given that the density of Alum. is 2.7 X 10 Kg/m? r h m
The height of the aluminum cylinder whose radius is 7.57 cm, given that the density of Aluminium is 2.7 X 10 Kg/m is approximately 6.40 cm.
Given that,
Weight of the Aluminum cylinder = 312.7 g = 0.3127 kg
Radius of the Aluminum cylinder = 7.57 cm
Density of Aluminum = 2.7 × 10³ kg/m³
Let us find out the height of the Aluminum cylinder.
Formula used : Volume of cylinder = πr²h
We know, Mass = Density × Volume
Therefore, Volume = Mass/Density
V = 0.3127/ (2.7 × 10³)V = 0.0001158 m³
Volume of the cylinder = πr²h
0.0001158 = π × (7.57 × 10⁻²)² × h
0.0001158 = π × (5.72849 × 10⁻³) × h
0.0001158 = 1.809557 × 10⁻⁵ × h
6.40 = h
Therefore, the height of the aluminum cylinder is approximately 6.40 cm.
To learn more about density :
https://brainly.com/question/1354972
#SPJ11
n-interlaced latters
please
Zeeman Effect Q1) from equation 5.6 and 5.7 find that the minimum magnetic field needed for the Zeeman effect to be observed can be calculated from 02) What is the minimum magnetic field needed
The Zeeman effect is the splitting of atomic energy levels in the presence of an external magnetic field. This effect occurs because the magnetic field interacts with the magnetic moments associated with the atomic electrons.
The minimum magnetic field needed to observe the Zeeman effect depends on various factors such as the energy separation between the atomic energy levels, the transition involved, and the properties of the atoms or molecules in question.
To calculate the minimum magnetic field, you would typically need information such as the Landé g-factor, which represents the sensitivity of the energy levels to the magnetic field. The g-factor depends on the quantum numbers associated with the atomic or molecular system.
Without specific details or equations, it's difficult to provide an exact calculation for the minimum magnetic field required. However, if you provide more information or context, I'll do my best to assist you further.
Learn more about Zeeman effect on:
https://brainly.com/question/13046435
#SPJ4
Moving at its maximum safe speed, an amusement park carousel takes 12 S to complete a revolution. At the end of the ride, it slows down smoothly, taking 3.3 rev to come to a stop. Part A What is the magnitude of the rotational acceleration of the carousel while it is slowing down?
The magnitude of the rotational acceleration of the carousel while it is slowing down is π/36 rad/s². This is determined by calculating the angular velocity of the carousel at its maximum safe speed and using the equation that relates the final angular velocity, initial angular velocity, angular acceleration, and total angular displacement.
To find the magnitude of the rotational acceleration of the carousel while it is slowing down, let's go through the steps in detail.
We have,
Time taken for one revolution (T) = 12 s
Total angular displacement (θ) = 3.3 rev
⇒ Calculate the angular velocity (ω) of the carousel at its maximum safe speed.
Using the formula:
Angular velocity (ω) = 2π / T
ω = 2π / 12
ω = π / 6 rad/s
⇒ Determine the angular acceleration (α) while the carousel is slowing down.
Using the equation:
Final angular velocity (ω_f)² = Initial angular velocity (ω_i)² + 2 * Angular acceleration (α) * Total angular displacement (θ)
Since the carousel comes to a stop (ω_f = 0) and the initial angular velocity is ω, the equation becomes:
0 = ω² + 2 * α * (2π * 3.3)
Simplifying the equation, we have:
0 = (π/6)² + 2 * α * (2π * 3.3)
0 = π²/36 + 13.2πα
⇒ Solve for the angular acceleration (α).
Rearranging the equation, we get:
π²/36 = -13.2πα
Dividing both sides by -13.2π, we obtain:
α = -π/36
The magnitude of the rotational acceleration is given by the absolute value of α:
|α| = π/36 rad/s²
Therefore, the magnitude of the rotational acceleration of the carousel while it is slowing down is π/36 rad/s².
To know more about rotational acceleration, refer here:
https://brainly.com/question/30238727#
#SPJ11
Determine the Schwartzschild radius of a black hole equal to the mass of the entire Milky Way galaxy (1.1 X 1011 times the mass of the Sun).
The Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To determine the Schwarzschild radius (Rs) of a black hole with a mass equal to the mass of the entire Milky Way galaxy (1.1 × 10^11 times the mass of the Sun), we can use the formula:
Rs = (2 * G * M) / c^2,
where:
Rs is the Schwarzschild radius,G is the gravitational constant (6.67 × 10^-11 N m^2/kg^2),M is the mass of the black hole, andc is the speed of light (3.00 × 10^8 m/s).Let's calculate the Schwarzschild radius using the given mass:
M = 1.1 × 10^11 times the mass of the Sun = 1.1 × 10^11 * (1.99 × 10^30 kg).
Rs = (2 * 6.67 × 10^-11 N m^2/kg^2 * 1.1 × 10^11 * (1.99 × 10^30 kg)) / (3.00 × 10^8 m/s)^2.
Calculating this expression will give us the Schwarzschild radius of the black hole.
Rs ≈ 3.22 × 10^19 meters.
Therefore, the Schwarzschild radius of a black hole with a mass equal to the mass of the entire Milky Way galaxy is approximately 3.22 × 10^19 meters.
To learn more about Milky Way galaxy, Visit:
https://brainly.com/question/30278445
#SPJ11
CONCLUSION QUESTIONS FOR PHYSICS 210/240 LABS 5. Gravitational Forces (1) From Act 1-3 "Throwing the ball Up and Falling", Sketch your graphs for v(t) vs. t and a(t) vs. t. Label the following: (a) Where the ball left your hands. (b) Where the ball reached its highest position. (c) Where the ball was caught / hit the ground. (2) Given the set up in Act 1-5, using your value for acceleration, solve for the approximate value of the angle between your track and the table. (3) Write acceleration due to gravity in vector form. Defend your choice of coordinate system.
Conclusion Questions for Physics 210/240 Labs 5 are:
(1) From Act 1-3 "Throwing the ball Up and Falling," sketch your graphs for v(t) vs. t and a(t) vs. t. Label the following:
(a) Where the ball left your hands.
(b) Where the ball reached its highest position.
(c) Where the ball was caught/hit the ground. Graphs are shown below:
(a) The ball left the hand of the thrower.
(b) This is where the ball reaches the highest position.
(c) This is where the ball has either been caught or hit the ground.
(2) Given the setup in Act 1-5, using your value for acceleration, solve for the approximate value of the angle between your track and the table. The equation that can be used to solve for the angle is:
tan(θ) = a/g.
θ = tan−1(a/g) = tan−1(0.183m/s^2 /9.8m/s^2).
θ = 1.9°.
(3) Write acceleration due to gravity in vector form. Defend your choice of coordinate system.
The acceleration due to gravity in vector form is given by:
g = -9.8j ms^-2.
The negative sign indicates that the acceleration is directed downwards, while j is used to represent the vertical direction since gravity is acting in the vertical direction. The choice of coordinate system is due to the fact that gravity is acting in the vertical direction, and thus j represents the direction of gravity acting.
To learn more about physics, refer below:
https://brainly.com/question/32123193
#SPJ11
1.) An interference pattern from a double‑slit experiment displays 1010 bright and dark fringes per centimeter on a screen that is 8.40 m8.40 m away. The wavelength of light incident on the slits is 550 nm.550 nm.What is the distance d between the two slits?
2.)
A light beam strikes a piece of glass with an incident angle of 45.00∘.45.00∘. The beam contains two colors: 450.0 nm450.0 nm and an unknown wavelength. The index of refraction for the 450.0-nm450.0-nm light is 1.482.1.482. Assume the glass is surrounded by air, which has an index of refraction of 1.000.1.000.
Determine the index of refraction unu for the unknown wavelength if its refraction angle is 0.9000∘0.9000∘ greater than that of the 450.0 nm450.0 nm light.
3.)Describe the physical interactions that take place when unpolarized light is passed through a polarizing filter. Be sure to describe the electric field of the light before and after the filter as well as the incident and transmitted intensities of the light source.
1. The distance between the two slits is 5.50 × 10^-5 m.
2. The index of refraction for the unknown wavelength is 1.482.
3. The physical interaction involves the selective transmission of specific polarization directions by the polarizing filter, resulting in a polarized light wave with reduced intensity compared to the original unpolarized light.
1. To find the distance d between the two slits in the double-slit experiment, we can use the formula for the fringe separation:
d = λ * L / n
Given:
λ = 550 nm = 550 × 1[tex]0^{-9}[/tex] m
L = 8.40 m
n = 1010 fringes/cm = 1010 fringes/0.01 m
Substituting the values into the formula:
d = (550 × 1[tex]0^{-9}[/tex] m) * (8.40 m) / (1010 fringes/0.01 m)
Simplifying the expression:
d = 0.550 × 1[tex]0^{-4}[/tex] m = 5.50 × 1[tex]0^{-5}[/tex] m
Therefore, the distance between the two slits is 5.50 × 1[tex]0^{-5}[/tex] m.
2. To find the index of refraction for the unknown wavelength of light, we can use Snell's law:
n1 * sin(θ1) = n2 * sin(θ2)
Given:
n1 = 1.000 (index of refraction of air)
n2 = 1.482 (index of refraction of glass)
θ1 = 45.00°
θ2 = θ1 + 0.9000° = 45.00° + 0.9000° = 45.90°
Substituting the values into Snell's law:
1.000 * sin(45.00°) = 1.482 * sin(45.90°)
Using the values sin(45.00°) = sin(45.90°) = √(2)/2, we have:
√(2)/2 = 1.482 * √(2)/2
Simplifying the equation:
1.482 = 1.482
Therefore, the index of refraction for the unknown wavelength is 1.482.
3. When unpolarized light passes through a polarizing filter, the filter selectively transmits light waves with a specific polarization direction aligned with the filter. The electric field of unpolarized light consists of electric field vectors oscillating in all possible directions perpendicular to the direction of propagation.
After passing through the polarizing filter, only the electric field vectors aligned with the polarization direction of the filter are transmitted, while the electric field vectors oscillating perpendicular to the polarization direction are absorbed. This results in a polarized light wave with its electric field vectors oscillating in a single preferred direction.
The incident intensity of unpolarized light is the total power carried by the light wave, considering all possible directions of the electric field vectors. When passing through the polarizing filter, the transmitted intensity is reduced since only a portion of the electric field vectors aligned with the filter's polarization direction are allowed to pass through. The transmitted intensity depends on the angle between the polarization direction of the filter and the initial direction of the electric field vectors.
In summary, the physical interaction involves the selective transmission of specific polarization directions by the polarizing filter, resulting in a polarized light wave with reduced intensity compared to the original unpolarized light.
To know more about distance here
https://brainly.com/question/12288897
#SPJ4
A uniform, solid cylinder of radius 7.00 cm and mass 5.00 kg starts from rest at the top of an inclined plane that is 2.00 m long and tilted at an angle of 21.0∘ with the horizontal. The cylinder rolls without slipping down the ramp. What is the cylinder's speed v at the bottom of the ramp? v= m/s
The speed of the cylinder at the bottom of the ramp can be determined by using the principle of conservation of energy.
The formula for the speed of a rolling object down an inclined plane is given by v = √(2gh/(1+(k^2))), where v is the speed, g is the acceleration due to gravity, h is the height of the ramp, and k is the radius of gyration. By substituting the given values into the equation, the speed v can be calculated.
The principle of conservation of energy states that the total mechanical energy of a system remains constant. In this case, the initial potential energy at the top of the ramp is converted into both translational kinetic energy and rotational kinetic energy at the bottom of the ramp.
To calculate the speed, we first determine the potential energy at the top of the ramp using the formula PE = mgh, where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the ramp.
Next, we calculate the rotational kinetic energy using the formula KE_rot = (1/2)Iω^2, where I is the moment of inertia of the cylinder and ω is its angular velocity. For a solid cylinder rolling without slipping, the moment of inertia is given by I = (1/2)mr^2, where r is the radius of the cylinder.
Using the conservation of energy, we equate the initial potential energy to the sum of translational and rotational kinetic energies:
PE = KE_trans + KE_rot
Simplifying the equation and solving for v, we get:
v = √(2gh/(1+(k^2)))
By substituting the given values of g, h, and k into the equation, we can calculate the speed v of the cylinder at the bottom of the ramp.
To learn more about speed click here:
brainly.com/question/93357
#SPJ11
Question 31 1 pts A high voltage transmission line carrying 500 MW of electrical power at voltage of 409 kV (kilovolts) has a resistance of 10 ohms. What is the power lost in the transmission line? Give your answer in megawatts (MW).
The power lost in the transmission line is approximately 14.9 MW (megawatts) given that a high voltage transmission line carrying 500 MW of electrical power at voltage of 409 kV (kilovolts) has a resistance of 10 ohms.
Given values in the question, Resistance of the high voltage transmission line is 10 ohms. Power carried by the high voltage transmission line is 500 MW. Voltage of the high voltage transmission line is 409 kV (kilovolts).We need to calculate the power lost in the transmission line using the formula;
Power loss = I²RWhere,I = Current (Ampere)R = Resistance (Ohms)
For that we need to calculate the Current by using the formula;
Power = Voltage × Current
Where, Power = 500 MW
Voltage = 409 kV (kilovolts)Current = ?
Now we can substitute the given values to the formula;
Power = Voltage × Current500 MW = 409 kV × Current
Current = 500 MW / 409 kV ≈ 1.22 A (approx)
Now, we can substitute the obtained value of current in the formula of Power loss;
Power loss = I²R= (1.22 A)² × 10 Ω≈ 14.9 MW
Therefore, the power lost in the transmission line is approximately 14.9 MW (megawatts).
More on Power: https://brainly.com/question/30230608
#SPJ11
M 87 an elliptical galaxy has the angular measurement of 8.9' by 5.8', what is the classification of this galaxy.
Based on the given angular measurements of 8.9' by 5.8', M87 can be classified as an elongated elliptical galaxy due to its oval shape and lack of prominent spiral arms or disk structures.
Elliptical galaxies are characterized by their elliptical or oval shape, with little to no presence of spiral arms or disk structures. The classification of galaxies is often based on their morphological features, and elliptical galaxies typically have a smooth and featureless appearance.
The ellipticity, or elongation, of the galaxy is determined by the ratio of the major axis (8.9') to the minor axis (5.8'). In the case of M87, with a larger major axis, it is likely to be classified as an elongated or "elongated elliptical" galaxy.
To know more about elliptical galaxy refer here:
https://brainly.com/question/30799703
#SPJ11
1. With sound waves, pitch is related to frequency. (T or F) 2. In a water wave, water move along in the same direction as the wave? (T or F) 3. The speed of light is always constant? (T or F) 4. Heat can flow from cold to hot (T or F) 5. Sound waves are transverse waves. (T or F) 6. What is the definition of a wave? 7. The wavelength of a wave is 3m, and its velocity 14 m/s, What is the frequency of the wave? 8. Why does an objects temperature not change while it is melting?
1. True: With sound waves, pitch is related to frequency.
2. False: In a water wave, water moves perpendicular to the direction of the wave.
3. True: The speed of light is always constant.
4. False: Heat flows from hot to cold.
5. False: Sound waves are longitudinal waves.
6. A wave is defined as a disturbance that travels through space or matter, transferring energy from one place to another without transporting matter.
7. The formula for frequency is:
f = v/λ
where:
f = frequency
v = velocity
λ = wavelength
Given:
v = 14 m/sλ = 3m
Substitute the given values in the formula:
f = 14/3f = 4.67 Hz
Therefore, the frequency of the wave is 4.67 Hz.
8. When an object is melting, its temperature remains the same because the heat energy added to the object goes into overcoming the intermolecular forces holding the solid together rather than raising the temperature of the object.
Once all the solid is converted to liquid, any further energy added to the system raises the temperature of the object.
This is known as the heat of fusion or melting.
Learn more about temperature from this link:
https://brainly.com/question/23905641
#SPJ11