Select the correct answer.
Which statement best describes how chemical equations demonstrate conservation of mass?
A.
The number of reactants is the same as the number of products.
B.
The compounds are the same on each side of the reaction.
C.
The number of atoms of each element is the same on each side of the equation.
D.
The state of matter is the same on each side of the equation.
Answers
"C" is correct.
The Law of Conservation of Mass states that matter can be neither created nor destroyed. This is evident in chemical equations as you will always start and end with the same amount of atoms of every element. They are all still there; they have just been rearranged.
Answer: C) The number of atoms of each element is the same on each side of the equation.
Explanation: Mass cannot be created nor destroyed.
Related Questions
PLEASE ME!!!! ANSWER IF YOU KNOW THE ANSWER
Answers
Answer:
organism 1
Explanation:
the arrow points away from it so that means that it is being eaten and it always starts from a producer so organism 1 is likely a producer :)
Using this illustration, what is the chemical formula? Picture and possible answers are below.
Answers
The answer is It is NH3.....
How much water must be added to 40.0 g of CaCl2 to produce a solution that is 35.0 wt% CaCl2?
Answers
The mass of water present in the solution is 21.5 g.
What is concentration?Concentration refers to the amount of solute in a solution. There are various ways of expressing concentration such as;
Molar concentrationMass concentrationPercentage concentrationWe have the following information;
Percent concentration = 35.0 %
mass of solute = 40.0 g
Mass of water = ?
So;
35 = x/40 + x × 100/1
35 = 100x/40 + x
35(40 + x) = 100x
1400 + 35x = 100x
1400 = 100x - 35x
1400 = 65x
x = 1400/65
x = 21.5 g
Hence the mass of water is 21.5 g.
Learn more about percent concentration: https://brainly.com/question/1600559
When we look at heat transfer problems that include phase transitions, there can bemanynec-essary steps. Consider a material of massmthat undergoes two phase transitions: from solid toliquid and then from liquid to gas. It starts at an initial temperature ofT0(well below the meltingtemperature ofTm) and it heated until it is a gas at a temperature ofTf(well above the boilingtemperature ofTv). How many different steps (simple temperature changes or phase transitions)of heat transfer would you need for this problem
Answers
Answer:
There would be 3 temperature changes and 2 phase transitions
Explanation:
The temperature of the material would first increase from T0 to Tm (its melting point)- This is one temperature change.
It would the change from solid to liquid at its melting point Tm.- This is one phase transition.
Its temperature would then increase from its melting point Tm to its boiling point Tv -This is another temperature change.
It would then change from liquid to gas at its boiling point Tv - This is another phase transition.
Finally, its temperature would then increase from its boiling point to T(f) - This is the third temperature change.
So, there would be 3 temperature changes and 2 phase transitions
Which of these is a learned behavior of a dog?
1.Begging for food
2.Drinking water
3.Panting on a hot day
4.Chewing on a bone
Answers
Weathering (breaking off sediments upriver), erosion (moving the sediments down river) and finally deposition caused the changes in the river.
What helps hold sediments in place to prevent erosion?
Answers
Answer:
Explanation:
Maintaining a healthy, perennial plant cover.
Mulching.
Planting a cover crop – such as winter rye in vegetable gardens. ...
Placing crushed stone, wood chips, and other similar materials in heavily used areas where vegetation is hard to establish and maintain.???
An unknown amount of sodium azide (NaN3) reacts and produces 0.033 moles of nitrogen gas. What mass of sodium metal is produced
Answers
Answer:
Mass of sodium metal is 130.87 gram
Explanation:
The complete reaction is
2 NaN3 --> 2 Na + 3 N2
We know that PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
On substituting the given values, we get
[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2
Sodium azide's molar mass
3.02 *(2/3) = 2.013 moles
Mass = 2.03 * 65.01 = 130.87 gram
if the original volume of a gas was 300 ml at 0.250 atm and 400.0 k what is the volume of the gas at 2.00 atm
Answers
Answer:
the answer is 18.75
a substance made up of only atoms of one type is called
Answers
Answer: chemical element
Explanation: A chemical element is a substance that contains only one type of atom, which is the smallest particle of an element.
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 24
Answers
Answer:
There are 0.311 moles of gas in the tank
Explanation:
Complete question
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 241 K. Find the number of moles of the gas
Solution
As we know
[tex]PV = nRT[/tex]
where P is the pressure of the gas in atm
V is the volume in liters
n is the number of moles
R is the gas constant = 0.08206 L·atm/K·mol
and T is the temperature in Kelvin
Substituting the given values in above equation, we get -
[tex]1.71 * 3.60 = n * 0.08206 * 241\\n = 0.311[/tex]
There are 0.311 moles of gas in the tank
What molecules are affected by injury to the pancreas?
Answers
Answer:
Causative/sensitizing factors of pancreatic injury include refluxed bile acids, alcohol, and pH. They largely mediate downstream events such as elevated intracellular Ca2+ via influx through TRPC3 channels and release from IP3 and ryanodine-sensitive Ca2+ stores.
Explanation:
Name the following alkyne:
CH3CH2C = C - CI
Answers
Answer:
The answer was be 1-chloro-1-butyne
Explanation:
In other words the answer is option letter A
You welcome have a nice day.
The name of the given alkyne, CH₃CH₂C = C – CI is 1 chloro 1 butyne.
The correct option is A.
What are alkynes?Alkynes are unsaturated hydrocarbons, that have carbon-carbon triple bonds.
Chlorobutyne is colorless and is liquid at room temperature and pressure.
It is polar, but still slightly soluble in water.
Thus, the correct option is A, 1 chloro 1 butyne.
Learn more about 1 chloro 1 butyne.
https://brainly.com/question/26210366
10 How does no-till farming help the environment?
A It decreases soil erosion.
C It increases fertilizer use.
B It increases soil removal.
D It decreases crop yield.
Answers
Answer: Answer is A it will decrease soil erosion
Explanation:it just will trust me
Answer:
A.
Explanation:
the soil will not loosen when u till it
A ballon is filled with 1.22 L of gas at 286 K is heated until the volume is 2.86 L while the pressure remains constant. What is the temperature of the gas in kelvin?
Answers
Answer:
670.45 K
Explanation:
Given that,
Initial volume, V₁ = 1.22 L
Initial temperature, T₁ = 286 K
Final volume, V₂ = 2.86 L
We need to find the new temperature of the gas. The relation between the volume and the temperature is given by :
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\T_2=\dfrac{V_2T_1}{V_1}\\\\T_2=\dfrac{2.86\times 286}{1.22}\\\\T_2=670.45\ K[/tex]
So, the new temperature of the gas is equal to 670.45 K.
why does the sky appear orang or red at sunset and sunrise?
Answers
Answer:
Because the sun is low on the horizon, sunlight passes through more air at sunset and sunrise than during the day, when the sun is higher in the sky. More atmosphere means more molecules to scatter the violet and blue light away from your eyes.
8. Calculate the pH of a solution if the [OH-] concentration is 0.015 M.
A) 1.82
B) 8.82
C) 12.18
D) 4.32
Answers
Answer:
1.82
Explanation:
pH is given by the equation
The speed of sound in water is 350m/s. If a sound wave has the frequency of 50Hz.
What would the wavelength of the wave be?
Answers
Answer:
Explanation
Let, Wavelength = W,
Given, frequency (f) = 50 Hz, wave velocity (V) = 342 m/s
We know, V = f × W
=> 342 = 50 × W
=> W = 342/50 metre
=> W = 6.84 metre
Please someone help me and all of the terms do not have to eh used
Answers
Answer:
The correct answer is -
1. D. mold
2. A. Cast
3. F. trace fossil
4. C. original material fossils
5. B. fossil record.
Explanation:
Mold is the impression of an organism in a rock that occurs due to the complete dissolving of the organism and only an impression left in sedimentary rocks.
The cast is a fossil copy of an organism in a rock that takes place when water-containing minerals fill the molds and creates a three-dimension copy of the fossil.
Trace fossils are the fossils that are preserved in such a manner that records of biological activity stored only instead of remains of plants or animals.
Storing originals animals or parts of the remaining such as tissue of an organism in natural form is known as original-material fossils.
Fossil records are the fossils ever found or discovered on the earth.
Someone help me out with this brain pop ⚠️
Answers
If a lab requires you to use 1.25 mol oxygen gas in a chemical reaction, how many molecules of oxygen will you need?
Answers
Answer:
7.53*10²³ molecules of oxygen will you need.
Explanation:
Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number applies to any substance.
You can then apply the following rule of three: if by definition of Avogadro's Number 1 mole of oxygen gas contains 6.023*10²³ molecules, 1.25 moles contains how many molecules?
[tex]amount of molecules=\frac{1.25 moles*6.023*10^{23}molecules }{1 mole}[/tex]
amount of molecules= 7.53*10²³
7.53*10²³ molecules of oxygen will you need.
which reacts faster, rock salt or grains of salt? Why?
Answers
Answer:
salt
Explanation:
because it has a much larger volume ratio
The results of photosynthesis as glucose and oxygen
A) Photosynthesis
B)Products
C)Chloroplasts
D)Glucose
Answers
Answer:
Products
Explanation:
CH3(ch2)2C(ch3)3 IUPAC name please?
Answers
Answer:
Explanation:
The name is of the compound is 3,3,4,4-tetramethylhexane.
IS ANYONE GOOD WITH CHEMISTRY???! i need help lol
Answers
Answer:
Help with what?
Explanation:
Answer:
help with whattt
Explanation:
um
The hammerhead shark can reproduce both sexually and asexually. What characteristic of the offspring would suggest that they were produced
through sexual reproduction? Offspring are-
all the same gender.
genetically diverse.
produced in small number.
produced very slowly.
Answers
Answer: I think it is ‘Genetically diverse’
Explanation:
What do plants do that requires Energy?
Answers
Answer:
Photosynthesis
Explanation:
Photosynthesis uses energy from light to convert water and carbon dioxide molecules into glucose (sugar molecule) and oxygen. The oxygen is released, or “exhaled”, from leaves while the energy contained within glucose molecules is used throughout the plant for growth, flower formation, and fruit development.
10. Air is a homogenous mixture of gases. Oxygen is 20% by volume of air typically. What
amount of moles of oxygen is present in 20 L of air at STP?
Answers
Answer:
893 moles
Explanation:
An ideal gas at STP occupies 22.4 liters. Calculating Oxygen as if it were an ideal gas there are . 893 moles of Oxygen in 20.0 liters.
Given this balanced equation: CS2 + 3 O2 CO2 + 2 SO2
Calculate how many moles of SO2 can be produced with when given 4 moles of CS2.
58.67 g
Now calculate how many moles of SO2 can be produced with when given 4 moles of O2.
Which one is the limiting reactant (4 moles CS2 or 4 moles of O2)? How do you know?
Answers
Answer: The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
Explanation:
1. Write the chemical symbol for each of the following elements.
Aluminum
Beryllium
Calcium
Flourine
Neon
Nitrogen
Silicon
Silfur
2. Write the name of the element for each of the following symbols.
Ar
B
Li
Na
Fe
3. What is the atomic number for the following elements?
C
Fe
Pb
O
N
Zn
Answers
Answer:
Chemical symbol:
Aluminum:Al
Berylium: Be
Calcium: Ca
Flourine: F
Neon: Ne
Nitrogen: N
Silicon: Si
Silfur: S
Element name
Ar: Argon
B: Boron
Li: Lithium
Na: Sodium
Fe: Iron
Atomic number
C:6
Fe: 26
Pb: 82
O: 8
N: 7
Zn: 30
Answer:
aluminum- Al
beryllium- Be
calcium- Ca
flourine- F
neon- Ne
nitrogen- N
silicon- Si
sulfur- S
_____________________________________________________
Ar- argon
B- boron
Li- lithium
Na- sodium
Fe- iron
______________________________________________________
C- 6
Fe- 26
Pb- 82
O- 8
N- 7
Zn- 30
Explanation:
A student adds 5400.0mL of 0.15M NaOH to 201.2mL of 4.0M NaOH. What is the final [NaOH]?
Answers
Answer:
0.287 M
Explanation:
Multiply the concentration of each solution by the volume of each (in liters) to get the moles of NaOH in that solution.
0.15 M • 5.4000 L = 0.81 mol NaOH
4.0 M • 0.2012 L = 0.80 mol NaOH
Add the mol of NaOH together to get the total --> 0.81 + 0.80 = 1.61 mol NaOH
Divide by the total volume of solution (5400.0 mL + 201.2 mL = 5,601.2 mL = 5.6012 L)
1.61 mol / 5.6012 L = 0.287 M NaOH