select the best answer: electricity flows in a circle. it flows from the outlet to the electric device and back to the outlet. if something gets in the way of this flow, what is it called?

The radial velocity technique is effective at finding planets that are massive and close to their host stars. This method has been particularly successful in detecting gas giant planets, with masses similar to or greater than Jupiter.

The radial velocity technique is effective at finding planets by measuring the small wobbles in a star's motion, caused by the gravitational pull of orbiting planets. It is particularly effective at detecting:

1. Massive planets: The technique works best for planets with larger masses, as they cause more significant wobbles in the star's motion, making them easier to detect.

2. Close-in orbits: Planets with shorter orbital periods (i.e., close to their host star) are more easily detected because they cause more frequent wobbles, resulting in a stronger signal.

In summary, the radial velocity technique is most effective at finding massive planets with close-in orbits. However, it may be less effective for smaller planets or those with more distant orbits, as they cause weaker or less frequent wobbles in the host star's motion.

*complete question; Summarize the effectiveness of the radial velocity technique. What types of planets is it effective at finding?

More on radial velocity: https://brainly.com/question/7805265

#SPJ11

Increasing the current in the filament while keeping the accelerating voltage the same will increase the overall intensity of X-rays produced but will have no effect on the minimum energy required for an electron to knock out an inner-shell electron from a metal atom in the anode.

The minimum energy required for an electron to knock out an inner-shell electron from a metal atom in the anode is known as the work function (W). If the energy of the incident electron is less than the work function, then the inner-shell electron will not be ejected, and no X-rays will be produced.

the minimum energy required for an electron to knock out an inner-shell electron from a metal atom in the anode remains the same (assuming no change in the material or temperature of the anode). Therefore, the work function remains constant even when the current in the filament is increased.

To know more about electron:

https://brainly.com/question/1255220

#SPJ4

In the illustration, a gas from I to F. The energy contributed to the gas through heat is 474 J when the gas moves along the diagonal line from I to F.

In physics, what is heat?

In thermodynamics, heat is energy that, in some way besides through labor or the movement of matter, spontaneously flows between a system and the surroundings. Heat transfers naturally from a warmer to a cooler body when an appropriate physical pathway is present.

What category does heat fit into?

Based on this, heat is divided into two categories: hot and cold. We encounter heat energy everywhere, including in icebergs, earthquakes, and our own bodies. There is heat energy in all matter. Heat energy is the only thing that results from the movement of microscopic particles called as atoms, atoms, or ions in fluids, solids, and gases.

To know more about heat visit:

https://brainly.com/question/30909810

#SPJ1

To convert the shaft's speed and uncertainty from RPM to radians per second :

1. Convert the given speed (1000 RPM) to radians per second:
- Multiply the speed by 2π (approximately 6.2832) to convert to radians.
- Divide by 60 to convert to seconds.

2. Convert the uncertainty in speed (±100 RPM) to radians per second:
- Multiply the uncertainty by 2π (approximately 6.2832) to convert to radians.
- Divide by 60 to convert to seconds.

Now let's calculate:

1. Speed in radians per second:
(1000 RPM) * (2π radians / 1 revolution) * (1 min / 60 s) ≈ 104.72 radians/s

2. Uncertainty in speed in radians per second:
(±100 RPM) * (2π radians / 1 revolution) * (1 min / 60 s) ≈ 10.47 radians/s

So, the shaft's speed is approximately 104.72 radians per second, and the uncertainty in speed is ±10.47 radians per second.

To know more about shaft's speed:

https://brainly.com/question/12873980

#SPJ11

If you measure the speed of a shaft to be 1000 rpm /- 100 rpm, the shaft's speed is 104.72 radians/sec and the uncertainty in speed is ±10.47 radians/sec.

To convert the shaft's speed and its uncertainty into radians/sec.
Step 1: Convert the speed from RPM to radians/sec
To convert RPM to radians/sec, we use the following conversion factor: 1 RPM = 2π radians/minute. Since there are 60 seconds in a minute, we divide by 60 to get radians/sec.
Speed in radians/sec = (1000 RPM) * (2π radians/minute) / 60 sec/minute ≈ 104.72 radians/sec
Step 2: Convert the uncertainty from RPM to radians/sec
Uncertainty in radians/sec = (100 RPM) * (2π radians/minute) / 60 sec/minute ≈ 10.47 radians/sec
So, the shaft's speed is approximately 104.72 radians/sec, with an uncertainty of ±10.47 radians/sec.

To learn more about speed, refer:-

https://brainly.com/question/28224010

#SPJ11

One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.

This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.

Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this. Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.

learn more about temperature here:

https://brainly.com/question/7323169

#SPJ11

One should drink a lot of water to maximise evaporative water loss in order to make a day walk in the Mojave Desert, where the temperature is 49 degrees Celsius, not fatal.  Option d.

This will support hydration levels maintenance and temperature control. Wearing loose, light-colored clothing, taking breaks in the shade, and taking off your shirt to promote radiative heat loss can also help reduce surface area to maximise convection. However, it is not advised to take aldosterone-suppressing medication without a doctor's supervision.

Human physiology, which is covered in PSIO 305, teaches students how the body functions in various situations. The body may be subjected to intense heat in the Mojave Desert, which can cause dehydration and disorders associated with heat. Staying hydrated and controlling body temperature through sweating and evaporative water loss are crucial to avoiding this.

Reduce heat absorption by dressing appropriately, taking rests in the shade, and using air conditioning. Aldosterone is a hormone that controls electrolyte balance; nevertheless, taking medicine to inhibit it might have consequences and is not advised without a doctor's supervision.

learn more about temperature here:

brainly.com/question/7323169

#SPJ4

Full Question: How might you utilize your recently acquired knowledge from PSIO 305 to make a daytime hike in the 49 degree Celsius Mojave Desert non-deadly?

a. decrease surface area to maximize convection

b. all of the above

c. take medication to suppress aldosterone

d. drink lots of water to increase evaporative water loss

e. take off your shift to increase radiative heat loss

The constant acceleration required to increase the speed of the car from 20 mi/h to 52 mi/h in 3 seconds is 10.67 mi/h².

First, convert the initial and final velocities to feet per second (fps) to match the unit of acceleration:

Then, use the formula:

where a is the acceleration, vf is the final velocity, vi is the initial velocity, and t is the time interval.

Substituting the values:

Finally, convert the answer to miles per hour squared:

To learn more about constant acceleration, here

https://brainly.com/question/29349889

#SPJ4

The Mars Global Surveyor travels at a tangential velocity of about 12,219 kilometres per hour.

A Mars year is roughly twice as long as an Earth year, therefore the Mars Global Surveyor has been monitoring Mars for a number of Martian years. During this time, it has seen gully creation, fresh boulder tracks, recently produced impact craters, and dwindling amounts of carbon dioxide ice in the south polar cap.

v = 2πr / T

R = 3390 km + 405 km = 3795 km

v = 2π(3795 km) / (1.95 hours)

v ≈ 12,219 km/hour

To know more about velocity  visit:-

https://brainly.com/question/17127206

#SPJ1

Answer:

The least amount of nitrogen oxide emissions comes from on-road vehicles, as modern automobiles are equipped with catalytic converters and other emission control systems to reduce nitrogen oxide emissions. Fossil fuel combustion, industrial processes, and electricity generation are significant sources of nitrogen oxide emissions, while fires can also contribute to nitrogen oxide emissions.

Explanation:

The approximate temperature of the Sun's corona is over a million degrees Kelvin (MK), which is much hotter than the surface temperature of 6000 K.

The temperature of the Sun's corona is much hotter than its surface temperature. While the surface of the Sun has a temperature of around 6000 K, the corona can reach temperatures of over a million degrees Kelvin (MK). The exact reason for this extreme heating is still a topic of research and debate among scientists, but some theories suggest that it may be related to magnetic fields and plasma processes in the Sun's outer atmosphere.

The surface temperature of the Sun, which is approximately 6000 K, refers to the temperature of its outer layer called the photosphere. However, the temperature of the Sun's corona, which is the outermost layer, is significantly higher. The approximate temperature of the Sun's corona is between 1 to 3 million K.

To learn more about temperature, refer:-

https://brainly.com/question/30313321

#SPJ11

The temperature of the Sun's corona, which is the outermost layer of its atmosphere, is much hotter than the surface temperature.

The approximate temperature of the corona is around 1-3 million Kelvin (K).

The reason for this high temperature is not yet fully understood, but there are some possible explanations that scientists have proposed.

One such explanation is related to the Sun's magnetic field.

The corona is filled with plasma, which is made up of charged particles such as ions and electrons.

The Sun's magnetic field interacts with this plasma, causing it to be heated and accelerated to high velocities.

This heating occurs through a process called magnetic reconnection, which converts magnetic energy into thermal energy.

Another possible explanation is related to the waves that propagate through the Sun's atmosphere.

These waves can carry energy to the corona, heating it up in the process.

This heating occurs through a process called wave heating, where the energy of the waves is converted into thermal energy.

Despite much research, the exact mechanisms responsible for the heating of the corona are not yet fully understood.

However, continued studies and observations of the Sun's atmosphere will help scientists to gain a better understanding of this complex and fascinating phenomenon.

To know more about temperature of the Sun's corona visit link :

https://brainly.com/question/3656878

#SPJ11

The basic formula for volume is length width height, while the area of a rectangular shape is length width. The sample of vegetable oil has a volume of 0.056 L.

A measure of a thing's capability is its volume. For instance, if the brim of a cup can hold 100 ml of water, that cup is said to have a 100 ml capacity. The quantity of space occupied by a three-dimensional object is another way to measure volume.

Density is calculated as follows: mass times volume.

to determine the vegetable oil's volume. If we rearrange the formula, we obtain:  volume = mass / density

Inputting the specified values results in:

volume = 0.0505 kg / 903 kg/m³³

We divide the density from kilogrammes per cubic metre to kilogrammes per litre in order to maintain consistency between the units:

volume = 0.0505 kg / (903 kg/m³ / 1000)

volume = 0.0505 kg / 0.903 kg/L

volume = 0.056 L

To know more about density visit:-

https://brainly.com/question/15164682

#SPJ1

False. Staleness and burnout are often associated with overtraining, which occurs when an individual exceeds their capacity to recover from intense physical training or activity.

Overtraining can lead to physical and psychological symptoms, including decreased performance, fatigue, irritability, and decreased motivation. It is important for individuals to listen to their bodies and take rest and recovery periods to prevent overtraining and associated symptoms.

To know more about Overtraining, please click:

brainly.com/question/5430690

#SPJ11

The total impulse that acts on the ball when it is thrown from a height of 1.5 m and bounces to 0.85 m is 0.0189 kg m/s.

Impulse refers to the force acting on the body over time. It can also be described as the change of momentum of a body.

i.e. I = Δp = mΔv

where I is the impulse on the body

p is the momentum of the body

m is the mass of the body

v is the velocity of the body

To calculate impulse acting on the body, one needs to calculate the velocity of the ball just before and after hitting the floor

According to the third equation of motion,

[tex]2as=v^2-u^2[/tex]

where s is the displacement of the mass

u is the initial velocity

v is the final velocity

a is the acceleration

Velocity before hitting (v) = [tex]v_1[/tex]

Height or distance traveled (s) = 1.5 m

u = 0 m/s

a = g = 10 [tex]m/s^2[/tex]

[tex]2*10*1.5 = 0 - v_1^2\\30 = v_1^2\\v_1 = \sqrt{30} = 5.47 m/s[/tex]

Velocity after hitting (u) = [tex]v_2[/tex]

v = 0m/s

height (s) = 8.5 m

a = g = 10 [tex]m/s^2[/tex]

[tex]2*10*8.5=v_2^2-0\\17 = v_2^2\\v_2 = \sqrt{17} = 4.12 m/s[/tex]

Thus impulse = mass *change in velocity

= 0.014 * (5.47 - 4.12)

=0.0189 kg m/s

Learn more about Impulse:

https://brainly.com/question/28584774

#SPJ4

The total impulse (magnitude only) on the ball when it hit the floor is approximately 0.133 kg m/s

Answer -To find the total impulse on the 14-gram ball when it hit the floor, we'll first need to calculate its change in velocity.

Initial velocity (v1) can be found using the equation: v1 = √(2gh1), where g is the acceleration due to gravity (9.81 m/s^2) and h1 is the initial height (1.5 m).

v1 = √(2 * 9.81 * 1.5) ≈ 5.42 m/s (downward)

Final velocity (v2) can be found similarly: v2 = √(2gh2), where h2 is the final height (0.85 m).

v2 = √(2 * 9.81 * 0.85) ≈ 4.09 m/s (upward)

Now, we can calculate the change in velocity (∆v) by summing the magnitudes of v1 and v2:

∆v = 5.42 + 4.09 = 9.51 m/s

To find the total impulse, we'll use the equation: Impulse = m∆v, where m is the mass of the ball (converted to kg).

m = 14 g * (1 kg / 1000 g) = 0.014 kg

Impulse = 0.014 kg * 9.51 m/s ≈ 0.133 kg m/s

The total impulse (magnitude only) on the ball when it hit the floor is approximately 0.133 kg m/s.

To learn more about Impulse , click on this -

brainly.com/question/30466819

#SPJ11

The formula I = P/E holds true for calculating the current in a circuit, and can be verified by substituting the values of power and voltage into the equation.

This statement confirms that the correct formula for calculating the current in a circuit is I = P/E, which is derived from the rule that power is equal to voltage multiplied by current. The validity of the formula can be checked by substituting the values of power and voltage into the equation, which should yield the correct value of current.

It is important to understand and use the correct formula for calculating current in a circuit, as it is a fundamental concept in electrical engineering and plays a crucial role in designing and analyzing electrical systems.

To know more about current, here

brainly.com/question/13076734

#SPJ4

To determine the spacing of the melanin rods in the feather assuming this to be the first-order diffraction, we need to use the equation:
d sinθ = mλ

where d is the spacing of the melanin rods, θ is the diffraction angle, m is the order of diffraction, and λ is the wavelength of the incident light.

Assuming the first-order diffraction, m = 1.

The diffraction angle can be determined from the equation:
sinθ = λ / (2 * a)

where a is the width of the feather.

Without knowing the width of the feather or the wavelength of the incident light, it is not possible to determine the spacing of the melanin rods.

Therefore, the answer is: Not enough information is given to determine the spacing of the melanin rods in the feather.

To know more about first-order diffraction:

https://brainly.com/question/29826222

#SPJ11

Weight is defined as the force on an object that results from acceleration or gravity.

It can be calculated as:

W=mg

W= weight of an object (Newtons)

m = mass of the object (kilograms)

g = gravity (m/s^2)

given the information we can rearrange for m:

[tex]m=\frac{3920N}{9.8m/s^2}[/tex]

[tex]m=400 kg[/tex]

As the temperature of a volume of air increases, the air molecules move faster, making them more tightly packed and thus increasing the air's density. false

As the temperature of a volume of air increases, the air molecules move faster, which causes them to spread out and occupy a larger volume. This decrease in the air's density is due to the fact that the pressure of the gas is determined by the number of gas molecules present in a given volume, and an increase in temperature reduces the number of molecules per unit volume, resulting in a decrease in density.

This relationship is described by the ideal gas law, which states that the pressure of a gas is inversely proportional to its volume, and directly proportional to its temperature and the number of molecules present.

Learn more about temperature

https://brainly.com/question/11464844

#SPJ4

False. The air molecules move more quickly when the temperature of a volume of air rises, which causes them to spread out more and decrease the density of the air.

The mass of a gas's molecules and how tightly they are packed affect the gas' density. The average kinetic energy of a gas's molecules rises as its temperature rises, which causes the molecules to move faster and farther away from one another. This indicates that the density of the gas is decreasing since there are less molecules present in a given amount of gas. On the other hand, as a gas's temperature drops, its molecules move more slowly and pack closer together, increasing the gas' density.

learn more about density here:

https://brainly.com/question/952755

#SPJ11

If the environmental air temperature decreases at a rate of 8°C/km, the atmosphere would be considered absolutely stable.

Here's a step-by-step explanation:

1) The stability of the atmosphere refers to its tendency to resist or promote vertical motion of air parcels.

2) When the temperature of the air decreases with height at a rate of less than 6.5°C/km, the atmosphere is considered absolutely stable.

3) When the temperature of the air decreases with height at a rate between 6.5°C/km and 10°C/km, the atmosphere is considered conditionally unstable.

4) When the temperature of the air decreases with height at a rate greater than 10°C/km, the atmosphere is considered absolutely unstable.

5)In this case, the temperature of the air is decreasing at a rate of 8°C/km, which is less than the threshold for conditionally unstable and absolutely unstable conditions.

6) Therefore, the atmosphere is considered absolutely stable.

Overall, when the environmental air temperature decreases at a rate of 8°C/km, the atmosphere is considered absolutely stable, because the rate of temperature decrease is less than the threshold for conditionally unstable and absolutely unstable conditions.

To know more about Temperature :

https://brainly.com/question/11464844

#SPJ11

The factor by which the moment of inertia changed is equal to the ratio of the angular speed squared, i.e. (7.5 rad/s)2 / (5 rad/s)2.

The moment of inertia (I) is an important physical quantity which describes the rotational inertia of an object. It is a measure of an object's resistance to change in its angular motion.

A rotating object's moment of inertia is influenced by the distribution of its mass. Stretching out one's arms causes a change in the moment of inertia because it alters the mass distribution of the person seated on a revolving stool.

The change in the moment of inertia (ΔI) is equal to the difference between the original moment of inertia (I1) and the new moment of inertia (I2).

ΔI = I1 - I2

Given that the angular speed of the person decreased from 7.5 rad/s to 5 rad/s, we can calculate the change in the moment of inertia:

ΔI = (7.5 rad/s)2 / I1 - (5 rad/s)2 / I2

Thus, the factor by which the moment of inertia changed is given by:

Factor = I2 / I1 = (7.5 rad/s)2 / I1 / (5 rad/s)2 / I2

Therefore, the factor by which the moment of inertia changed is equal to the ratio of the angular speeds squared.

To learn more about speeds visit:

https://brainly.com/question/13943409

#SPJ4

As the object distance becomes larger, the image distance approaches the focal length of the lens, while the object distance approaches infinity.

In optics, the relationship between object distance (u), image distance (v), and focal length (f) is given by the lens equation, 1/f = 1/v + 1/u. When the object distance becomes much larger than the focal length, i.e., u >> f, the image distance v approaches the focal length f. This means that the image is formed at a distance from the lens that is approximately equal to the focal length. On the other hand, as the object distance approaches infinity, the image distance approaches the same value as the focal length. This phenomenon is known as the "far point" of the lens and is used to correct for certain types of vision problems, such as nearsightedness.

Therefore, As the object distance becomes larger, the image distance approaches the focal length of the lens, while the object distance approaches infinity.

Learn more about focal length

brainly.com/question/29870264

#SPJ11

The intensity of the helium-neon laser beam is 27.93 W/m² when projected onto a circular spot with a diameter of 3.38 mm.

The intensity (I) of a laser beam is defined as the power (P) per unit area (A) of the beam, and is given by:

I = P / A

where

P = power of the laser beam

A = area of the circular spot

The area of the circular spot can be found using its diameter (d):

A = π (d/2)² = π (3.38 mm/2)² = 8.95 x [tex]10^-^6[/tex] m²

Substituting the given values:

I = (0.250 mW) / (8.95 x [tex]10^-^6[/tex] m²) = 27.93 W/m²

Note that the power was converted from milliwatts to watts.

Therefore, the intensity of the laser beam is 27.93 W/m².

Learn more about Intensity

brainly.com/question/17323212

#SPJ11

Increasing the pressure inside the extruder barrel is not a function of the screen pack and breaker plate.

The screen pack and breaker plate have several functions, including:
1. Filtering out contaminants and impurities from the molten plastic.
2. Creating uniform melt flow.
3. Reducing pressure fluctuations.
However, they do not serve to increase the pressure inside the extruder barrel.

Learn more about extruder barrels here: https://brainly.com/question/20344049

#SPJ11

Roadblock advertising".refers to a method for scheduling media in which the airwaves (both cable and network tv channels) are flooded to make it virtually impossible to miss the ads.

The term you are looking for is "roadblock advertising". It is a method of scheduling media where an advertisement is broadcasted on multiple channels simultaneously, aiming to reach a large audience in a short period.

This strategy can create a "roadblock" effect, as the ads dominate all available time slots across different channels, making it difficult for viewers to avoid them. While it can be an effective way to ensure a high frequency of exposure, it can also be seen as intrusive and annoying to some viewers, leading to a backlash against the advertiser.

Learn more about Roadblock advertising

https://brainly.com/question/29842268

#SPJ4

Roadblocking refers to a method for scheduling media in which the airwaves (both cable and network TV channels) are flooded to make it virtually impossible to miss the ads.

Roadblocking is a technique used in advertising where a particular advertisement is broadcast simultaneously across all available media channels, such as television, radio, and the Internet, in order to reach the maximum possible audience.

In the context of television advertising, roadblocking involves buying up all available ad slots across multiple networks or channels at the same time, so that viewers are exposed to the same ad multiple times in a short period of time. This can be an effective way to create a sense of urgency and increase the impact of an advertising campaign.

However, roadblocking can also be seen as a controversial tactic, as it can be perceived as intrusive and annoying to viewers who feel bombarded by the same ad repeatedly. It can also be expensive for advertisers, as they must pay a premium to secure all available ad slots at the same time.

To learn more about broadcast, refer:-

https://brainly.com/question/7352892

#SPJ11

Sure, here are the steps to rank the fictitious stars based on their brightness as seen from Jupiter:

Determine the distance of each star from Jupiter. The closer a star is to Jupiter, the brighter it will appear in the sky.

Use the inverse square law to calculate the relative brightness of each star as seen from Jupiter.

The inverse square law states that the brightness of an object decreases with the square of its distance from the observer.

So, if star A is twice as far away from Jupiter as star B, it will appear four times dimmer than star B.

Rank the stars based on their relative brightness.

The star that appears brightest from Jupiter will be ranked first, while the star that appears dimmest will be ranked last.

Keep in mind that the brightness of a star also depends on its intrinsic brightness, or luminosity.

A star with a higher luminosity will appear brighter than a star with a lower luminosity, even if they are at the same distance from Jupiter.

However, since the set of stars is fictitious and we do not have information about their intrinsic brightness, we cannot take this factor into account in our ranking.

Overall, to rank the fictitious stars based on their brightness as seen from Jupiter, we need to consider their distance from Jupiter and use the inverse square law to calculate their relative brightness.

To know more about  fictitious stars :

https://brainly.com/question/15156213

#SPJ11

We can use the formula for Newton's second law (F = ma) to find the mass of the merry-go-round, given the force and assuming that it accelerates uniformly.

The angular acceleration of the merry-go-round can be found using the formula:

angular acceleration = (final angular speed - initial angular speed) / time

angular acceleration = [tex](0.5250 rev/s - 0 rev/s) / 5.00 s = 0.105 rev/s^2[/tex]

Then, using the formula for torque (τ = Iα) and the moment of inertia of a solid disk (I = 0.5MR^2), we can find the torque exerted on the merry-go-round. Assuming that the torque comes from a person pushing on the edge of the disk, we can estimate the force exerted as F = τ / R, where R is the radius of the disk.

To know more about Newton's second law, here

brainly.com/question/13447525

#SPJ4

If its mass is 500 kg and the acceleration due to gravity is 10 m/s^2, the weight of the elevator would be 5000 N (Newtons) .

To calculate the weight of the elevator, we can use the formula:

weight = mass * acceleration due to gravity

Given that the mass of the elevator is 500 kg and the acceleration due to gravity is 10 m/s^2, we can substitute these values into the formula and calculate the weight:

weight = 500 kg * 10 m/s^2

= 5000 N

Therefore, the weight of the elevator would be 5000 N (Newtons) if its mass is 500 kg and the acceleration due to gravity is 10 m/s^2.

To know more about acceleration due to gravity, here

brainly.com/question/13860566

#SPJ4

--The complete Question is, What would be the weight of the elevator if its mass is 500 kg, assuming that the acceleration due to gravity is 10 m/s^2? --

When you add a third slit to a two-slit, with the same slit separation, and shine the same laser beam on the three slits, the three-slit pattern will be different from compared to the double-slit pattern.

In a double-slit pattern, you will observe alternating bright and dark fringes due to the constructive and destructive interference of the light waves. In the three-slit pattern, the interference becomes more complex due to the additional slit. This results in a pattern with sharper and more closely spaced bright fringes, surrounded by regions of darkness, and weaker secondary peaks in between. The central maximum in the three-slit pattern will also be brighter and narrower than in the double-slit pattern.

The intensity distribution in the three-slit pattern is due to the combined effect of the three individual wave sources. The pattern is created by the superposition of these waves, which constructively and destructively interfere at different points, creating a more intricate pattern. The three-slit pattern differs from the double-slit pattern by having sharper, more closely spaced bright fringes, a narrower central maximum, and weaker secondary peaks. The overall intensity distribution is more complex due to the interference of the three individual wave sources.

know more about intensity here:

https://brainly.com/question/22279695

#SPJ11

The number 12 tells us that the mirror is a concave mirror, as this is the only type of mirror that can produce an image of a real object that is magnified.

An image that has been enlarged is reflected back from a concave mirror's shallow inward curve, which concentrates light rays into a single point.

Contrast this with a convex mirror, which has a curved outer surface that spreads the light rays out, giving the image less clarity.

A magnification of 12 indicates that the size of the image is 12 times larger than the size of the object. Magnification is computed by dividing the size of the image by the size of the object.

Complete Question:

An  object is placed in front of a mirror, and the magnification of the system is 12. What does this number tell you about the nature of the mirror?

To learn more about  concave mirror visit:

https://brainly.com/question/27841226

#SPJ4

The speed of the raft immediately after the diver jumps is 0.6 m/s.

After the swimmer jumps, the momentum of the system is still conserved, but it is no longer zero, since the swimmer is now moving. We can use the equation:

(m1v1 + m2v2)before = (m1v1 + m2v2)after

We want to solve for v2, velocity of the raft immediately after the jump.

Before jump, velocity of  raft is zero, so we can simplify  equation to:

m1v1 = m2v2

Substituting in  values we know, we get:

60 kg * 1.5 m/s = 150 kg * v2

Simplifying, we get:

v2 = (60 kg * 1.5 m/s) / 150 kg = 0.6 m/s

So the speed of the raft immediately after the diver jumps is 0.6 m/s.

To know more about momentum, here

brainly.com/question/30677308

#SPJ4

This is a very large amount of time, approximately [tex]3.6 x 10^5[/tex] years, which is not feasible for the astronauts.

We can use the conservation of momentum to solve this problem. Initially, the system (two astronauts and the laser) is at rest, so the total momentum is zero. When the laser is fired and the astronaut is propelled towards the shuttle, she gains some momentum in the direction of the shuttle, and the system as a whole gains an equal and opposite momentum.

First, we need to find the momentum gained by the astronaut. We can use the formula for the momentum of a photon:

p = h / λ

where p is the momentum, h is the Planck constant, and λ is the wavelength of the laser light. We are given the power of the laser (121.0 W), but we also need to know the energy of each photon. We can use the formula:

E = hc / λ

where E is the energy of a photon, c is the speed of light, and λ is the wavelength of the laser light. Rearranging this formula, we get:

λ = hc / E

Substituting the values and converting to SI units, we get:

[tex]λ = (6.626 x 10^-34 J s)(3.00 x 10^8 m/s) / (6.63 x 10^-19 J) = 3.13 x 10^-7 m[/tex]

Using this wavelength, we can find the momentum gained by the astronaut:

[tex]p = h / λ = (6.626 x 10^-34 J s) / (3.13 x 10^-7 m) = 2.12 x 10^-27 kg m/s[/tex]

This is the momentum gained by the astronaut in one photon.

To find the time it takes for the astronaut to reach the shuttle, we can use the impulse-momentum theorem:FΔt = Δp

where F is the force exerted by the laser, Δt is the time for which the force is applied, and Δp is the change in momentum of the astronaut. We can rearrange this formula to solve for Δt:

Δt = Δp / FThe force exerted by the laser can be found by dividing the power by the speed of light:

[tex]F = P / c = 121.0 W / 3.00 x 10^8 m/s = 4.03 x 10^-7 N[/tex]

Substituting the values, we get:

[tex]Δt = Δp / F = (2.12 x 10^-27 kg m/s) / (4.03 x 10^-7 N) = 5.27 x 10^-21 s[/tex]

This is the time it takes for the astronaut to gain the momentum needed to reach the shuttle. However, this time does not include the time it takes for the astronaut to travel the distance to the shuttle. We can use the average velocity of the astronaut to find this time:

v_avg = Δx / Δtwhere Δx is the distance to the shuttle. Substituting the values, we get:

[tex]v_avg = (39.4 m - 19.7 m) / (5.27 x 10^-21 s) = 3.80 x 10^22 m/s[/tex]

Learn more about the astronauts.

https://brainly.com/question/11244838

#SPJ4