Protocols for processing emails. SMTP, POP3, IMAP
What is a protocol?
A protocol is a set of instructions for formatting and processing data on a network. Computers share a common language called network protocols. Although the software and hardware used by computers on a network can vary widely, the use of protocols allows them to communicate with each other. Just as two people from different parts of the world may not be in their original language speak languages but can still communicate via a common third language are standardized protocols like a common language that computers can use. The Internet Protocol (IP) allows computers to communicate with each other, just as the UN uses its six languages to facilitate communication between its delegates around the world. the world.
However, if one computer knows the IP and the other does not, they cannot interact.
To learn more about the protocol visit here
brainly.com/question/28446917
#SPJ4
why is packet switching in the internet analogous to driving from one city to another and asking directions along the way?
The packet switch determines the outgoing link based on the packet's destination IP address.
Asking which route to take is comparable to a packet asking, given its destination address, which outgoing link it should be forwarded on. In digital telecommunications networks, such as computer networks, packet switching is used to minimize transmission latency—the amount of time it takes for data to move across a network—increase communication reliability, and make the best use of the channel capacity that is available. Small data packets are sent between different networks using packet switching. These data "packets" or "chunks" enable quicker, more effective data transport. A file is frequently sent across a network in smaller data packets when a user does so.
Learn more about data here-
https://brainly.com/question/11941925
#SPJ4
Why might a motherboard be installed on top of spacers?
To keep the motherboard from touching the case, it sits on spacers or elevated screw holes. As long as you adhere to ESD protection guidelines, stacking circuit boards while disassembling a computer is acceptable.
What happens if motherboard standoffs are not used?They are essential for keeping the PC case and motherboard separate. An electric surge could occur if the motherboard and PC case's metal parts touch. Your motherboard may fail as a result of a short circuit caused by an electric surge. For compatibility reasons, standoffs typically come with the PC case.
A motherboard spacer: what is it?Motherboard standoffs are spacers made of metal or nylon that separate the motherboard from the motherboard tray in the PC case. Standoffs are required for each motherboard in order to keep it secure and elevated above the motherboard tray in the case. Circuit boards that are subjected to an electric current are known as motherboards.
To know more about motherboard visit :-
https://brainly.com/question/29834097
#SPJ4
describe and differentiate ways of scheduling linux commands to be executed in the future.
In a Linux system, you can schedule future tasks with the at command. The at command works with the atd daemon, just like the crontab file does with the cron daemon.
In Linux, what is scheduling?The Linux scheduler is a multi-queue scheduler, which means that there is a run queue of processes waiting for each of the logical host CPUs. In one of these run queues, each virtual CPU waits for its task to be completed. A CPU migration is the process of moving a virtual CPU from one run queue to another.
What exactly is execution planning?Automated server-side script logic known as Scheduled Script Executions or Scheduled Jobs are executed at a predetermined time or on a regular basis. When application processes require script logic to be executed according to a time schedule, use Scheduled Script Executions.
To know more about Linux system visit :-
https://brainly.com/question/28443923
#SPJ4
what is the difference between a formula and a function in excel?
A function in Excel is a calculation that has already been specified, whereas a formula is an equation created by the user.
Without a function, what good is an Excel formula?A formula is an equation that determines the value of a cell by using hard-coded numbers or cell references. Sometimes a straightforward formula is all you need to achieve the appropriate answer, but functions allow you to do much more. An Excel function is an existing, predefined formula.
What are functions and formulas?The OR function returns TRUE if any of its parameters are evaluated as TRUE, and FALSE if all of them are.
To know more about Excel visit :-
https://brainly.com/question/3441128
#SPJ4
why are carbon and silicon especially relevant to us:
Both silicon and carbon play a significant role in human life. Silicon is a key element in electronics and has been utilized by humans to create everything from arrowheads to glass.
The required details for Carbon/Silicon in given paragraph
How does the Carbon/Silicon work?
A key component of human biology is carbon. Mick Jones, formerly of The Clash and Big Audio Dynamite, and Tony James make up the rock duo Carbon/Silicon (formerly of Generation X and Sigue Sigue Sputnik). The band got its start in 2002.
Carbon/Silicon attempts to buck the conventional approach to rock & roll, much like Jones' earlier work with Big Audio Dynamite. Alan McGee, a critic, described the group as
To know more about Carbon/Silicon Visit now
https://brainly.com/question/20293317
#SPJ4
HELP ME PLEASEEEEEEEEEEE
A non-profit director presenting the impact of the organization over the past year to a possible contributor and a marketing director summarizing the most effective marketing initiatives this year to their supervisor.As a result, choice C is accurate.
What is marketing director?A marketing director is a specialist in charge of supervising each step in the planning and implementation of a specific campaign.Planning, performing analysis, and leading their team are their responsibilities, along with making sure that interactions with clients and coworkers go smoothly from start to finish.Because it is a business, a capable marketing director must be able to make the numbers.They have a keen eye for where others miss development.If they don't, though, they are the first to confess it and offer a fix before being asked.The chief marketing officer is the de facto leader of the marketing department, while the marketing director is a leader within their area of the marketing team.To learn more about marketing director refer
https://brainly.com/question/30121595
#SPJ1
A(n) ________ support system is designed to be easy to use and allows someone to obtain essential information without extensive training
An executive assistance system is created to be user-friendly and enables access to crucial information without substantial training.
What decision-support tool is utilized to facilitate group work?Along with GDSS, there are three basic types of DSS decision models: tactical, operational, and strategic. A GDSS, which includes tools to assist group meetings and collaborative work, is specifically created to serve multiple decision makers or a team of decision makers.
Which of the following systems is utilized by management and executives who require access to data in a summary format?With the use of decision support systems, managers can more easily compare and evaluate vast amounts of data by using different decision models to analyze or summarize the data.
To know more about information visit:-
https://brainly.com/question/29981375
#SPJ4
Which statement best describes elasticity?
Elasticity in cloud computing refers to the ability of a cloud system to automatically scale up or down its resources, such as computing power and storage, in response to changes in demand.
What is elasticity in cloud?
Elasticity in cloud computing refers to the ability of a cloud service to automatically adjust its capacity to meet the needs of the workload.
This can include scaling up or down the number of virtual machines, increasing or decreasing storage capacity, or adjusting the amount of network bandwidth.
This allows users to only pay for the resources they need, and can also help to improve the performance and availability of their applications.
To learn more about Elasticity, visit: https://brainly.com/question/2033894
#SPJ1
what type of value does the input function always result in?
A string is always returned by the input function. The data from the user is first converted into a string via the Python library's input function.
Input () returns a value for what reason?To encourage user interaction, the Python input () operation is used. allows queue browsing and user input. After reading the data, it turns it into a personality unit and then sends that back. after switching to character unit, returns user input
What does input mean in Python?The input() method in Python is used to collect user input. The input function turns any input you provide into a string. The input() function still converts an integer value you enter into a string.
To know more about Python visit:-
https://brainly.com/question/18502436
#SPJ4
at which layer of the osi model does a router function? A .Presentation LayerB .Transport LayerC .Network LayerD .Datalink LayerE .Application LayerF .Physical LayerG .Session Layer
A router is a popular Layer 3 device used in the network layer of the OSI Model. A router that operates at Layer 3 will look at the IP and IPX addresses of incoming data packets.
What is Layer 3's function in the OSI model?OSI Model, Layer 3: The network layer provides the practical and procedural methods of transporting variable length data sequences from a source host on one network to a destination host on another network while upholding the level of service demanded by the transport layer.
What does OSI's network layer mean?The OSI Model's foundation is thought to be the network layer. By designating a destination, it decides which logical channel (virtual circuit) is the optimal for transferring data between nodes and manages it.
To know more about router visit :-
https://brainly.com/question/29869351
#SPJ4
Practice with CSS. A. Write the CSS for an HTML selector footer with the following characteristics: a light-blue background color, Arial font, dark-blue text color, 10 pixels of padding, and a narrow, dashed border in a dark-blue color. B. Write the CSS for an id named notice that is configured to 80% width and centered. C. Write the CSS to configure a class that will produce a headline with a dotted line underneath it. Choose a color that you like for the text and dotted line. D. Write the CSS to configure an h1 element selector with drop-shadow text, a 50% transparent background color, and sans-serif font that is 4em in size. E. Write the CSS to configure an id named feature with small, red, Arial font; a white background; a width of 80%; and a drop shadow
Different languages are used by HTML and Cascading Style Sheets (CSS). All headings, lists, and paragraphs will appear and operate consistently.
What part does CSS play in setting up a class?A CSS class is an attribute that is used to specify a set of HTML elements in order to apply certain styling and formatting to those components using CSS.
An element called a CSS class is used to identify a group of HTML elements so that the proper styling and formatting may be applied to those elements using CSS.
Therefore, /*# represents ID selector
*/
#feature{
font-family: 'Arial';
font-size: 10px;
color: red;
background: white;
width: 80%;
filter: drop-shadow(30px 10px 4px #4444dd);
}
To know more about HTML visit:-
https://brainly.com/question/14748417
#SPJ4
What is the main purpose of trace arrows for a precedent cell?
A
* The arrows show how data has corrupted a cell.
O The arrows show from which cells data is coming.
O The arrows show where a specific error is occurring.
The arrows show where a specific error is going next.
Answer:
O The arrows show from which cells data is coming.
Explanation:
Which is the keyboard shortcut for setting up rulers in a Photoshop project?
If you are referring to Microsoft Office Excel shortcuts, the function key F2 turns the cell to edit mode.
What are the function of keyboards and laptops?Keyboards and laptops come with a function key and have own specific functions. Function key F2 is more about on modifying. Function key F2 can also be used to quickly rename a file or a folder in Windows.
A keyboard shortcut, sometimes referred to as a hotkey, is a set of one or more keys used in computers to quickly launch a software application or carry out a pre programmed operation.
Therefore, If you are referring to Microsoft Office Excel shortcuts, the function key F2 turns the cell to edit mode.
Learn more about Microsoft Office Excel on:
https://brainly.com/question/13623928
#SPJ1
write 3 different functions in c to create an array of 10 integers on the heap without causing a memory leak. hint: you will need to assign the address to a pointer that was created outside the function. remember, you can return an address or change what a pointer points to (the contents of a pointer) in a function by passing the pointer by reference or by passing the address of the pointer.
In order to prevent memory leaks, it is a good idea to write the free() statement right after the malloc() or calloc() method.
What procedure can be applied to prevent a memory leak? In order to prevent memory leaks, it is a good idea to write the free() statement right after the malloc() or calloc() method.To prevent dangling pointers, the free() statement should be followed by assigning NULL to the pointer variable.There are a few causes of memory leaks in C/C++:When the pointer loses its initial allocated value in C/C++ programming, a memory leak typically happens.Due to the allocated object's unavailability and inability to be deallocated, it becomes the source of the memory leak.Memory Leakage Factors.Using Unwanted Object Reference: These are object references that are no longer required.The garbage collector was unable to free up the memory because another object was still making references to the undesired object.Using long-lived static objects causes a memory leak as well.To learn more about memory leaks refer
https://brainly.com/question/30052440
#SPJ4
list five applications of personal computers. is there a limit to the applications of computers? do you envision any radically different and exciting applications soon? if so, what?
Five computer applications cases Education in banking industrial sectors Entertainments. Hospitals. handling data.
Do computers have a finite range of possible uses?No fixed cap exists. The quantity of system resources (such as CPU cycles, RAM, HDD seek/write activity, etc.) that each program "consumes," as well as the amount of RAM and processing power (CPU speed) you have, all have a role in how many apps can be executed at once.
What use cases exist for personal computers?Word processing, Internet browsing, Internet faxing, e-mail and other digital messaging, multimedia playback, computer game play, and programming are all frequent tasks that can be performed using software applications.
To train computer vision systems, use deep learning techniques.
To know more about Five computer applications visit :-
https://brainly.com/question/22409872
#SPJ4
the full receiving and return address, including names, along with the highest classification level and dissemination markings are required to be on the outer layer of classified documents double wrapped for mailing.
On the outer layer of classified documents double-wrapped for shipping, the whole receiving and return address, including names, as well as the highest security level and dissemination markings, are necessary. Loss, compromise, or suspicion of compromise are all components of a security violation.
Receiving Addressindicates the address(es) on the relevant blockchain that has been designated, as the Company may transfer or refund any proceeds from the auctions to bidders.
Return AddressWhen sending letters by postal service, a return address explicitly includes the sender's address. It gives the recipient (and occasionally authorized intermediates) a way to decide how to react to the message's sender, if necessary.
To know more about receiving and returning visit here
https://brainly.com/question/14814266
#SPJ4
Explain how you would filter the dog dataset using traversal to have a filtered list of dogs who live long lives.
This is within code. Org Unit 5 Lesson 10. 7
In such a dataset, the data tree's deepest level would contain the individual canines who lived the longest lifetimes.
Explain dataset ?In such a dataset, the data tree's deepest level would contain the individual canines who lived the longest lifetimes.In order to add all of the nodes at the deepest level to a new list, you would have to navigate the tree.Therefore, all of the canines who lived the longest lives will be included in this list.The deepest node would be reached by moving along the farthest left side of the tree. Then, you would need to go back and go along the tree's left-right node to determine whether it continues further.Each time you succeed in reaching the deepest node, add it to the list.
To learn more about dataset refer
https://brainly.com/question/28168026
#SPJ4
the cost to ship a package is a flat fee of 75 cents plus 25 cents per pound. 1. declare a const named cents per pound and initialize with 25. 2. get the shipping weight from user input storing the weight into shipweightpounds. (remember %d is used to read in an integer from the user.) 3. using flat fee cents and cents per pound constants, assign shipcostcents with the cost of shipping a package weighing shipweightpounds. c programming
The price of shipping a package containing c programming that weighs shipweight pounds
const int CENTS_PER_POUND = 25;
int shipweight pounds;
printf ("Enter the shipping weight in pounds: ");
scanf ("%d", &shipweigh tpounds);
int shipcostcents = 75 + (shipweight pounds * CENTS_PER_POUND);
What is weight?It is a measurement of the heaviness of an object, and is determined by the gravitational pull of the Earth or other celestial objects on the object. Weight is measured in Newtons, kilograms, and pounds, depending on the system of measurement used. Weight is affected by the mass of the object, its location in the universe, and the gravitational pull of the Earth or other celestial bodies on the object.
To learn more about weight
https://brainly.com/question/28800918
#SPJ4
You are troubleshooting a computer system and want to review some of the motherboard configuration settings. Where is most of this data stored?
BIOS/UEFI ROM
CMOS RAM
DIMM RAM
HDD
Based on data on the EEPROM chip, the majority of systems will automatically establish storage settings (speed, voltage, and timing, including latency).
What is computer ?A computer is a device that may be configured to automatically perform series of mathematical or logical operations (computation). Modern digital computers are capable of running programmes, which are generalised sets of operations. These apps give computers the ability to carry out a variety of tasks. A computer is a minimally functional computer that contains the peripheral devices, system software (primary software), and hardware required for proper operation. This phrase may also apply to a collection of connected computers that work as a unit, such as a network or group of computers. The sole purpose of early computers was to perform computations. Since ancient times, simple manual tools like the calculator have supported humans in performing computations.
To know more about computer visit:
brainly.com/question/21474169
#SPJ1
Which freeze panes option should you choose to freeze the first column and the first row?
Click the Freeze Panes drop-down arrow under Windows Group on the View tab. Choose Freeze First Column or Freeze Top Row.
Which option for freezing the first column and first row should you select?pause the top row ensures that as you browse through a worksheet, just the top row is visible. First Column Freeze keeps the first column of a worksheet visible just as you navigate through it. Use the Freeze Panes option to freeze any number of rows and columns.
In Excel, how can I freeze the top column and top row?Microsoft Excel now enables you to freeze both rows and columns simultaneously in addition to locking columns and rows separately. This is how: Choose a cell to the right of the last row, below.
To know more about freeze visit:-
https://brainly.com/question/27912878
#SPJ4
given the following decision variables: x1: number of hyperlinks to produce x2: number of fastlinks to produce x3: number of speedlinks to produce x4: number of microlinks to produce x5: number of etherlinks to produce what is the objective function?
A. Max [(189-136)X1+(149-101)X2+(129-96)X3+(169-137)X4+(139-101)X5] is the correct objective function. It represents the objective of maximizing the profit, where the profit is the difference between the selling price and the production cost of each type of link.
The profit for Hyperlinks is (189-136)X1, for FastLinks is (149-101)X2, for SpeedLinks is (129-96)X3, for MicroLinks is (169-137)X4 and for EtherLinks is (139-101)X5. The objective is to maximize the total profit by choosing the optimal values of the decision variables (X1, X2, X3, X4, X5).
Option B. Min [(189-136)X1+(149-101)X2+(129-96)X3+(169-137)X4+(139-101)X5] would represent the objective of minimizing the profit, which is opposite of what is given in the problem statement.
Option C. Max (189X1+149X2+129X3+169X4+139X5) doesn't consider the production cost and thus will not give the correct profit value.
Option D. Min (136X1+101X2+96X3+137X4+101X5) would represent the objective of minimizing the production cost, which is not the same as maximizing the profit.
Learn more about objective function: https://brainly.com/question/29185392
#SPJ4
If a fan is installed in a computer case so that it blows the wrong direction , what problem can this cause ?
Dust and debris may result if a fan is installed in a computer case such that it blows in the wrong direction.
Can the direction of a PC case fan be reversed?Not possible. To be able to reverse the rotation, which practically all computer fans cannot accomplish, a fan must be made to spin in both directions. The PCB in these brushless fans only changes the phases in one direction.
How can I turn my computer's fans in a different direction?It's possible that you can just remove the fan, flip it over to the opposite side (or right-side up, as it were), and then screw it back in. Most fans can be set up facing either way.
To know more about computer visit:-
https://brainly.com/question/15707178
#SPJ4
How do I fix Excel ran out of resources while attempting to calculate one or more formulas?
To cope with the formula reference issue, the simplest course of action is to separate the particular spreadsheet tab that is causing the mistake. Just make a new tab and duplicate all the tabs to accomplish this.
Excel has run out of memory. How do I repair this?Consider turning off or removing any installed macros or add-ins. This might aid with memory clearing. Another option is to increase the memory available to Excel.
Ref mistakes in Excel: what causes them?When a formula references an invalid cell, it returns the #REF! error. The most frequent cause of this is the deletion or pasting over of cells that were used as references in formulas.
To know more about formula reference visit :-
https://brainly.com/question/10777550
#SPJ4
java declare double variables x1, x2, x3, and x4, and read each variable from input in that order. find the average of x1, x2, x3, and x4 and assign the result to avgnumber.
The required program or the code for given question is given below.
What is code for finding the Average?#include <iostream>
#include<iomanip>
using namespace std;
int main()
{
double avgValue;
double x1,x2,x3,x4;
cout<<"Enter values of x1, x2, x3 and x4 : " ;
cin >> x1 >> x2 >> x3 >> x4;
avgValue = (x1+x2+x3+x4)/4;
cout << fixed << setprecision(2) << avgValue << endl;
return 0;
}
to know more about double datatype, visit
https://brainly.com/question/24802096
#SPJ4
Question # 3 Dropdown Complete the sentence. During the phase of a software development project, developers create a detailed plan that specifically defines how each of the needed features will be implemented.
Answer: D
Explanation:
"During the "requirements and analysis" phase of a software development project, developers create a detailed plan that specifically defines how each of the needed features will be implemented."
The requirements gathering and analysis phase is a crucial step in the software development process. It involves collecting detailed information about each requirement and understanding its purpose. The focus of this phase is to determine the best way to fulfill each requirement and to plan for testing.
During this phase, input from testers is also valuable as they contribute to the analysis of the requirements. Additionally, this step includes a key decision-making aspect, the buy vs build decision. It is important to evaluate whether it is more cost-effective to purchase a third-party product instead of building one from scratch.
Learn more about software development project here: brainly.com/question/26135704
#SPJ1
what additional type of license must be purchased for each client device or user that will be accessing the server when using windows server 2016 standard or datacenter editions?
Client Access Licenses (CALs) user that will be accessing the server when using windows server 2016 standard or datacenter editions.
What is datacenter edition?
The Microsoft server operating system known as Windows Server Datacenter Edition is designed for line-of-business applications that need the highest levels of scalability and availability, server consolidation, big data warehouses, and OLTP (online transaction processing).
Additionally, the Storage Spaces Direct software-defined storage functionality and support for software-defined networking are absent from the standard version. Virtual-machine licencing is the primary distinction between the Standard and Datacenter editions. An infinite number of Windows Server containers are supported by both editions.
Similar to Standard, Datacenter demands CALs but permits an unlimited number of virtual machines to be run simultaneously. It will typically be less expensive to get simply the standard licence if you are operating fewer VMs on a physical server because the cost of a Datacenter licence is significantly greater than that of a standard licence.
Read more about datacenter edition:
https://brainly.com/question/14526761
#SPJ4
assume that a runner runs 14 kilometers in 45 minutes and 30 seconds. write a program that displays the average speed in miles per hour. (note 1 mile is equal to 1.6 kilometers.
Mercury orbits the Sun at a speed of 30 kilometers per second. At this time, Mercury will move in 2 seconds.= 48 + 2 miles. equals 96 kilometers.
Mercury travels around the Sun at a speed of 48 kilometers per second. Mercury will travel 96 kilometers in 2 seconds. What is an object's speed? The ratio of the distance an object travels to the time it takes to cover that distance is the object's speed. Mercury orbits the Sun at a speed of 30 kilometers per second. Therefore, the rate of Mercury's orbital motion around the Sun in kilometers per second= 30 divided by 1.6 km/s. 48 kilometers per second. At this time, Mercury will move in 2 seconds. = 48 + 2 miles. equals 96 kilometers. Mercury travels around the Sun at a speed of 48 kilometers per second. Mercury will travel 96 kilometers in 2 seconds.
Learn more about Speed here:
https://brainly.com/question/4955980
#SPJ4
is the open( ) system call in unix absolutely essential? what would the consequences be of not having it?
No, it is not necessary to use the open() system call on Unix. Since the open() system call is used to open a file and assign it a file descriptor, without it the system would have trouble handling files.
The required details for system in given paragraph
What is a system?
A A System is an organized set of elements working together to achieve a common goal. It can refer to different components like a physical system, a business system, a computer system or a social system. Systems typically include input, processing, output, and feedback loops that help the system adapt to changing conditions.
Without the open() system call, applications would not be able to interact with files, limiting their functionality would .
To learn more about system
brainly.com/question/22946942
#SPJ4
what two large studies helps to inform the risk of sudden cardiac death as a result of exercise and guided the acsm preparticipation screening algorithm?
Exercise preparticipation questionnaires, according to research, may lower the risk of acute myocardial infarction (AMI) or sudden cardiac death (SCD).
What is sudden cardiac death (SCD)?
SCA and SCD refer to the sudden cessation of cardiac activity with hemodynamic collapse, which is typically caused by sustained ventricular tachycardia/ventricular fibrillation. These events are most common in patients with structural heart disease (which may or may not have been diagnosed previously), particularly coronary heart disease. (See "Pathophysiology and Etiology of Sudden Cardiac Arrest" for more information.)If an intervention (e.g., defibrillation) or spontaneous reversion restores circulation, the event is called SCA (or aborted SCD), and if the patient dies, the event is called SCD [1]. However, the term SCD is still used to describe both fatal and nonfatal cardiac arrests. The specific causes of SCA differ depending on the population studied and the patient's age (table 1). SCA is caused most commonly by hemodynamic collapse caused by primary ventricular fibrillation (VF) or ventricular tachycardia (monomorphic or polymorphic) degenerating into VF.To learn more about sudden cardiac death (SCD) refer to:
brainly.com/question/28040866
#SPJ4
how long do you have to unsend a message on iphone?
Answer:
depending on who your texting
Explanation: