Answer:
0.83 g
Explanation:
Step 1: Write the balanced equation
Fe + CuSO₄ ⇒ Cu + FeSO₄
Step 2: Calculate the moles corresponding to 0.75 g of Fe
The molar mass of Fe is 55.85 g/mol.
[tex]0.75g \times \frac{1mol}{55.85g} = 0.013 mol[/tex]
Step 3: Calculate the moles of Cu produced from 0.013 moles of Fe
The molar ratio of Fe to Cu is 1:1. The moles of Cu produced are 1/1 × 0.013 mol = 0.013 mol.
Step 4: Calculate the mass corresponding to 0.013 moles of Cu
The molar mass of Cu is 63.55 g/mol.
[tex]0.013mol \times \frac{63.55g}{mol} = 0.83 g[/tex]
Answer:
If 0.75 grams of iron (Fe) react, 0.85 grams of copper (Cu) will be produced.
Explanation:
You know the following balanced reaction:
Fe + CuSO₄ ⇒ Cu + FeSO₄
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following quantities react and are produced:
Fe: 1 moleCuSO₄: 1 moleCu: 1 moleFeSO₄: 1 moleBeing:
Fe: 55.85 g/moleCu: 63.54 g/moleS: 32 g/moleO: 16 g/molethe molar mass of the compounds participating in the reaction is:
Fe: 55.85 g/moleCuSO₄: 63.54 g/mole + 32 g/mole+ 4* 16 g/mole= 159.54 g/moleCu: 63.54 g/moleFeSO₄: 55.85 g/mole + 32 g/mole+ 4* 16 g/mole= 151.85 g/moleThen, by stoichiometry of the reaction, the amounts of reagent and product that participate in the reaction are:
Fe: 1 mole*55.85 g/mole= 55.85 gCuSO₄: 1 mole* 159.54 g/mole= 159.54 gCu: 1mole* 63.54 g/mole= 63.54 gFeSO₄: 1 mole* 151.85 g/mole= 151.85 gThen you can apply a rule of three as follows: if 55.85 grams of Fe produces 63.54 grams of Cu, 0.75 grams of Fe how much mass of Cu does it produce?
[tex]mass of Cu=\frac{0.75 grams of Fe*63.54 grams of Cu}{55.85 grams of Fe}[/tex]
mass of Cu= 0.85 grams
If 0.75 grams of iron (Fe) react, 0.85 grams of copper (Cu) will be produced.
1-chloro-4-methyl-2-pentene undergoes hydrolysis in warm water to give a mixture of 4-methyl-2-penten-1-ol and 4-methyl-1-penten-3-ol. Draw the structure of the intermediate's resonance contributor leading to the formation of 4-methyl-1-penten-3-ol.
Answer:
Explanation:
attached here is the diagram representing the structure
if 2.22 moles of ammonia (NH3) decomposes according to the reaction shown how many moles of hydrogen (H2) are formed?
Answer:
five(5) hydrogen are formed
A small amount of red paint is mixed with water. When a laser pointer shines through the mixture, the beam is clearly visible in the mixture. This mixture is a .
Answer: Heterogeneous (Colloid)
Explanation: This is because your solution is a colloid. A colloidal solution has particles between 40 and 900 nm and as the laser light shines through the paint and Water mixture, the paint particles scatter the light because of the Tyndall Effect (Named after the physicist John Tyndall). A Colloidal Solution is a heterogeneous solution that looks like its homogeneous but is a mixture of very small particles that don't really become a solution.
A small amount of red paint is mixed with water. When a laser pointer shines through the mixture, the beam is clearly visible in the mixture. This mixture is a Heterogeneous.
What is mixture?A mixture is a substance made by combining two or more dissimilar chemical compounds that are not chemically linked in chemistry. When two or more substances are physically combined, their identities are maintained, and the mixture takes the shape of solutions, suspensions, or colloids.
Chemical elements and compounds, among others, can be mechanically blended or mixed to create mixtures without causing any chemical bonding and other chemical change, preserving the chemical characteristics and makeup of each ingredient. A small amount of red paint is mixed with water. When a laser pointer shines through the mixture, the beam is clearly visible in the mixture. This mixture is a Heterogeneous.
Therefore, the mixture is Heterogeneous mixture.
To know more about mixture, here:
https://brainly.com/question/12160179
#SPJ2
What is the mass of 3.45 moles
NO2?
(N = 14.01 g/mol, O = 16.00 g/mol)
Answer:
158.7 g
Its the right answer
Write the empirical formula
Answer:
[tex]1) NH_{4}IO_{3}\\2) Pb(IO_{3})_{4} \\3) NH_{4}(C_{2}H_{3}O_{2})\\4) Pb(C_{2}H_{3}O_{2})_{4}[/tex]
Explanation:
[tex]1) NH_{4}^{+}IO_{3}^{-} ---> NH_{4}IO_{3}\\2) Pb^{4+}(IO_{3}^{-})_{4} --->Pb(IO_{3})_{4} \\3) NH_{4}^{+}(C_{2}H_{3}O_{2})^{-} ---> NH_{4}(C_{2}H_{3}O_{2})\\4) Pb^{4+}(C_{2}H_{3}O_{2})^{-} _{4} --->Pb(C_{2}H_{3}O_{2})_{4}[/tex]
A chemist measures the energy change Delta H during the following
2Fe2O3(s)->4FeO(s)+O2(g).
1) this reactions is: Endothermic or exothermic.
2) suppose 94.2g of Fe2O3 react. will any heat be relased or absorbed. yes absorbed. yes releases. no.
3) If you said heat will be released or absorbed in the second part of the question. calculate how much heat will be absored or released. be sure your answer has correct number of significant digits.
Answer: 1) Endothermic
2) Yes, absorbed.
3) 166.86 kJ will be absorbed.
Explanation:
1) To determine if a reaction is endothermic (heat is absorbed by the system) or exothermic (heat is released by the system), first calculate its change in Enthalpy, which is given by:
ΔH = [tex]H_{products} - H_{reagents}[/tex]
For the reaction 2Fe₂O₃(s) ⇒ 4FeO(s) + O₂(g):
Enthalpy of Reagent (Fe₂O₃(s))
Enthalpy of formation for Fe₂O₃(s) is - 822.2 kJ/mol
The reaction needs 2 mols of the molecule, so:
H = 2(-822.2)
H = - 1644.4
Enthalpy of Products (4FeO(s) + O₂(g))
Enthalpy of formation of O₂ is 0, because it is in its standard state.
Enthalpy of formation of FeO is - 272.04 kJ/mol
The reaction produces 4 mols of iron oxide, so:
H = 4(-272.04)
H = -1088.16
Change in Enthalpy:
ΔH = [tex]H_{products} - H_{reagents}[/tex]
ΔH = - 1088.16 - (-1644.4)
ΔH = + 556.2 kJ/mol
The change in enthalpy is positive, which means that the reaction is absorving heat. Then, the chemical reaction is Endothermic.
2) When Fe₂O₃(s) reacts, heat is absorbed because it is an endothermic reaction.
3) Calculate how many mols there is in 94.2 g of Fe₂O₃(s):
n = [tex]\frac{mass}{molar mass}[/tex]
n = [tex]\frac{94.2}{160}[/tex]
n = 0.6 mols
In the reaction, for 2 mols of Fe₂O₃(s), 556.2 kJ are absorbed. Then:
2 mols --------------- 556.2 kJ
0.6 mols ------------- x
x = [tex]\frac{0.6*556.2}{2}[/tex]
x = 167 kJ
It will be absorbed 167 kJ of energy, when 94.2 g of Fe₂O₃(s) reacts.
when dissolved in water, an acid or a base breaks down into a. a proton and an electron b. two negative ions c. a positive and a negative ion d. a positive ion and a proton
Answer:
C. A positive and a negative ion
Explanation:
Acids and bases are made up of charged particles known as ions. The ions present in acids are oppositely charged and are held together by strong electrostatic forces. When acids or bases are dissolved in water, the electrostatic forces holding their individual molecules together are weakened and these ions are free to move apart in a process known as dissociation. Dissociation occurs because of the attraction between the positive and negative ions in the acid and bases and the negative and positive polarity of water.
For example, when an acid like hydrochloric acid is dissolved in water it dissociates into positive and negative ions as follows:
HCl(aq) -----> H+ + Cl-
When a base like sodium hydroxide is dissolved in water, it dissociates into positive and negative ions as follows:
NaOH(aq) ----> Na+ + OH-
Answer:
yeah C is correct
Explanation:
why is copper and iron are used for cooking utensils
Answer:
because according to the electron sea model they are good conductor of heat so,they can be used for cooking.
what is the molarity of a solution that contains 49.8 grams of nai and is dissolved in enough water to make 1.50 liters
Answer: The molarity of solution is 0.221 M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in L
moles of [tex]NaI[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{49.8g}{149.89g/mol}=0.332mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]Molarity=\frac{0.332mol}{1.50L}[/tex]
[tex]Molarity=0.221mol/L[/tex]
Therefore, the molarity of solution is 0.221 M
How many oxygen molecules are needed to make 10 carbon dioxide molecules according to the following balanced chemical equation? 2 CO + O2 → 2 CO2
five oxygen molecules
step by step explanation.
according to the equation,one molecule of oxygen is enough to react with two carbon molecules thus 10 carbon molecules need 5oxygen molecules
A 0.187 M weak acid solution has a pH of 3.99. Find Ka for the acid. Express your answer using two significant figures.
Answer:
5.56 × 10⁻⁸
Explanation:
Step 1: Given data
Concentration of the weak acid (Ca): 0.187 MpH of the solution: 3.99Step 2: Calculate the concentration of H⁺
We will use the following expression.
pH = -log [H⁺]
[H⁺] = antilog -pH = antilog -3.99 = 1.02 × 10⁻⁴ M
Step 3: Calculate the acid dissociation constant (Ka)
We will use the following expression.
[tex]Ka = \frac{[H^{+}]^{2} }{Ca} = \frac{(1.02 \times 10^{-4})^{2} }{0.187} = 5.56 \times 10^{-8}[/tex]
Each unknown mixture contains 5 metal constituents. Select the 5 metal ions that you have identified as being present in your mixture. Please double check your selections before you hit the submit button. a. Ca b. Co c. Cr d. Fe e. K f. Mn g. Zn
Explanation:
A metal ion is a type of atom compound that has an electric charge.
Such atoms willingly lose electrons in order to build positive ions called cations. The selected Ions are :
[tex]1. Mn^2^+\\\ 2. Ca^2^+\\\ 3. Co^2^+\\\ 4. Fe^2^-\\\ 5. K^+[/tex]
What is the half-life for the first order decay of 14C according to the reaction, 146C — 147N +e- ?
The rate constant for the decay is 1.21 x10-4 year-1
Answer:
5727 years or 5730 (rounded to match 3 sig figs) whichever one your teacher prefers
Explanation:
First Order decay has a half life formula of Half Life = Ln (2) / k = 0.693/K
Half-life = 0.693/k = 0.693/1.21 x10-4 = 5727 years or 5730 (rounded to match 3 sig figs)
This should be correct because if you google the half-life of 14 C it is ~ 5700 years
What is ductility in a solid?
Answer:
Ductility is the how stretchable a solid is under tension. If a solid is ductile, then it can be stretched into wire-like (think rubber band). Ductility is similar to malleability and physical components of solids.
Explanation:
Which pair of factors affects the force of gravity between objects
Answer:
The Answer is B. Mass and distance
Explanation:
Trust me lol
Answer:mass and distance
Explanation:
Pb(OH)Cl, one of the lead compounds used in ancient Egyptian cosmetics, was prepared from PbO according to the following recipe: PbO(s) NaCl(aq) H2O(l) --> Pb(OH)Cl(s) NaOH(aq) How many grams of PbO and how many grams of NaCl would be required to produce 10.0 g of Pb(OH)Cl
Answer:
8.59 g
2.25 g
Explanation:
According to the given situation the calculation of grams of PbO and grams of NaCL is shown below:-
Moles of Pb(OH)CL is
[tex]= \frac{Mass}{Molar\ mass}[/tex]
[tex]= \frac{10.0 g}{259.65g / mol}[/tex]
= 0.0385 mol
Mass of PbO needed is
[tex]= 0.385mol Pb(OH) Cl\times \frac{1 mol PbO}{1molpb (OH) cl} \times \frac{223.2g PbO}{1mol PbO}[/tex]
After solving the above equation we will get
= 8.59 g
Mass of NaCL needed is
[tex]= \frac{1mol\ NaCl}{1molPb\ (OH)Cl} \times \frac{58.45NaCl}{1mol NaCl}[/tex]
After solving the above equation we will get
= 2.25 g
Therefore we have applied the above formula.
Choose the situation below that would result in an endothermic ΔHsolution.
a) When |ΔHsolute| > |ΔHhydration|
b) When |ΔHsolute| is close to |ΔHhydration|
c) When |ΔHsolute| < |ΔHhydration|
d) When |ΔHsolvent| >> |ΔHsolute|
e) There isn't enough information to determine.
Answer:
Option A - When |ΔHsolute| > |ΔHhydration|
Explanation:
A solution is defined as a homogeneous mixture of 2 or more substances that can either be in the gas phase, liquid phase, solid phase.
The enthalpy of solution can either be positive (endothermic) or negative (exothermic).
Now, we know that enthalpy is amount of heat released or absorbed during the dissolving process at constant pressure.
Now, the first step in thus process involves breaking up of the solute. This involves breaking up all the intermolecular forces holding the solute together. This means that the solute molecules are separate from each other and the process is always endothermic because it requires energy to break interaction. Thus;
The enthalpy ΔH1 > 0.
Thus, the enthalpy of the solute has to be greater than the enthalpy of hydration.
An endothermic ΔHsolution occurs when |ΔH solute| < |ΔH hydration|.
A substance dissolves in water when the solute - solvent interaction exceeds the solute - solute solute interaction. The energy required to break the bonds between solutes is the ΔHsolute and the energy released when solute - solvent interaction take place is called the ΔHhydration.
We know that when |ΔH solute| < |ΔH hydration|, energy is required to break up the solute - solute interaction and ΔHsolution is endothermic.
Learn more: https://brainly.com/question/1340582
Which element has the largest atomic radius
Answer:
Francium
Explanation:
The atomic radius increases from top to bottom in a group, and decreases from left to right across a period.
so francium (Fr) is the largest atom or has highest radii.
Hope this helps & please mark as brainiest!
Answer:
Francium has the largest atomic radius.
The general trend for atomic radii is increasing from top to bottom and decreasing from left to right so the one with the largest atomic radius will be in the bottom left of the periodic table.
Why Graphite is Diamagnetic?
Answer: Through years of studying and research ;
Graphite has shown that in weak and quantizing magnetic fields it is material is a highly anisotropie diamagnetic substance whose non-oscillating part of the magnetic suscepti- bility weakly depends on magnetic field.
Explanation:
Diamagnetism is a (very) weak form of magnetism which is caused (induced) by a change in the orbital motion of electrons mostly due to an applied magnetic field.
What is the specific heat of a 85.01 g piece of an unknown metal that exhibits a 45.2°C temperature change upon absorbing 1870 J of heat?
Answer:
[tex]0.48~\frac{J}{g~^{\circ}C}[/tex]
Explanation:
In this question, we have to remember the relationship between Q (heat) and the specific heat (Cp) the change in temperature (ΔT), and the mass (m).
[tex]Q=m*Cp*ΔT[/tex]
The next step is to identify what values we have:
[tex]Q~=~1870~J[/tex]
[tex]m~=~85.01~g[/tex]
[tex]ΔT~=~45.2~^{\circ}C[/tex]
[tex]Cp~=~X[/tex]
Now, we can plug the values and solve for "Cp":
[tex]1870~J=~85.01~g~*Cp*45.2~^{\circ}C[/tex]
[tex]Cp=\frac{1870~J}{85.01~g~*45.2~^{\circ}C}[/tex]
[tex]Cp=0.48~\frac{J}{g~^{\circ}C}[/tex]
The unknow metal it has a specific value of [tex]0.48~\frac{J}{g~^{\circ}C}[/tex]
I hope it helps!
At what geographical location would the boiling point of water be lowest?
A. Boston, Massachusetts
B. The coast of the Atlantic Ocean
C. The Dead Sea
D. The top of Mount Everest
Answer:
I think it would be the Dead Sea
Explanation:
Because the dead sea is already usually in the warmer temperatures, the boiling point of the water would be lower than the rest.
(-)-Cholesterol has a specific rotation of -32o. A mixture of ( )- and (-)-cholesterol was analyzed by polarimetry, and the observed rotation was 14o. What is the percent composition of the ( ) isomer in this mixture
Answer:
(+)-cholesterol = 71.88%
(-)-cholesterol = 28.12%
Explanation:
Asuming 1 gram of sample is dissolved in 1mL of water and the sample cell was 1dm long.
Enantiomeric excess is defined as the amount of pure enantiomer in a sample. The formula is:
ee = [α]mixture / [α]pure enantiomer.
Replacing:
ee = 14° / 32°×100 = 43.75%
As the sample is 14°, There is an excess of (+)-cholesterol and 56.25% is a 1:1 mixture of enantiomers.
That means percent composition of enantiomers is:
(+)-cholesterol = 43.75% + 56.25%/2 = 71.88%(-)-cholesterol = 56.25%/2 = 28.12%A cylindrical rod of length 1 m and radius 1 cm is submerged in water. The rod has a non-uniform mass distribution such that one half of the rod is much more massive than the other half. At which point in the rod can the buoyant force be considered to be acting?
A) at the rod's geometrical center
B) two of the given choices are correct
C) none of these
D) at the rod's center of mass
E) at the rod's center of gravity
Answer:
A) at the rod's geometrical center
Explanation:
Let us assume that the rod is replaced by water. And now this water volume is in translational and in rotational equilibrium.
Therefore, a net upward force must have been exerted by the surrounding liquid which acts at the center of mass of the water volume.
This force determines through the geometric center of the column of the cylindrical water
Moreover, the force is also independent of submerged body into it
Hence, the first option is correct
Identify which of the following are carbohydrates.
Check oh that apply
Answer:
3d and 4th
Explanation:
Carbohydrates general formula (CH2O)n.
Not 1st one because it has NH2-group.
2nd - C3H6O4, also it is acid.
3d - C3H6O3
4th - C6H12O6
Among the given compounds only compound present in 3rd option is a carbohydrate.
What are carbohydrates?Carbohydrates are the organic molecules which are made up of oxygen atom, carbon atom and hydrogen atom and general molecular formula of carbohydrates is CₙH₂ₙOₙ, where n is the number of atoms.
In the carbohydrate molecule, alcoholic group and aldehyde groups may present.
First given compound is not a carbohydrates as in that NH₃ group is present.Second given compound is also not a carbohydrate as in that carboxylic (-COOH) group is present.Third compound is a carbohydrate as in that compound same number of carbon and oxygen atoms are present and number of hydrogen atom is double to C & O atom.Fourth compound is also not a carbohydrate, as in that molecule number of carbon and oxygen atom is same but number of hydrogen is not double with respect to C & O.Hence compound C is carbohydrate.
To know more about carbohydrates, visit the below link:
https://brainly.com/question/26200989
Dinitrogen tetraoxide, a colorless gas, exists in equilibrium with nitrogen dioxide, a reddish brown gas.
One way to represent this equilibrium is:
N2O4(g)----------> 2NO2(g)
<----------
Indicate whether each of the following statements is true or false
At equilibrium at a fixed temperature, we can say that:
1. The concentration of NO2 is equal to the concentration of N2O4.
2. The rate of dissociation of N2O4 is equal to the rate of formation of N2O4.
3. The rate constant for the forward reaction is equal to the rate constant of the reverse reaction.
4. The concentration of NO2 divided by the concentration of N2O4 is equal to the same constant (regardless of initial concentrations)
Explanation:
N2O4(g) <----------> 2NO2(g)
Before proceeding,
A chemical equilibrium can be defined as a condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs.
Statement 1.
This statement is false. Equilibrium is not about equal concentrations but rather zero change in concentration of the reactants and products.
Statement 2.
This statement is True in chemical equilibrium; the forward and reverse reactions occur at equal rates.
Statement 3.
This statement is False. The rate constant for the forward reaction is not equal to the rate constant of the reverse reaction.
Statement 4.
The concentration of NO2 divided by the concentration of N2O4 is NOT equal to a constant. To obtain a constant value irregardless of the concentrations, the concentration of NO2 must be squared. This comes from the stoichiometry of the reaction
Kc= [NO2]2 / [N2O4]
This statement is false.
Determine the limiting reactant (LR) and the mass (in g) of nitrogen that can be formed from 50.0 g N 2O 4 and 45.0 g N 2H 4. Some possibly useful molar masses are as follows: N 2O 4 = 92.02 g/mol, N 2H 4 = 32.05 g/mol.
N 2O 4( l) + 2 N 2H 4( l) → 3 N 2( g) + 4 H 2O( g)
a) LR = N2O4, 45.7 g N2 formed
b) LR = N2O4, 105 g N2 formed
c) LR = N2H4, 13.3 g N2 formed
d) LR = N2H4, 59.0 g N2 formed
e) No LR, 45.0 g N2 formed
Answer:
Option A. LR = N2O4, 45.7g N2 formed
Explanation:
The balanced equation for the reaction is given below:
N2O4(l) + 2N2H4(l) → 3N2(g) + 4H2O(g)
Next, we shall determine the masses of N2O4 and N2H4 that reacted and mass of N2 produced from the balanced equation. This is illustrated below:
Molar mass of N2O4 = 92.02 g/mol
Mass of N2O4 from the balanced equation = 1 x 92.02 = 92.02 g
Molar mass of N2H4 = 32.05 g/mol
Mass of N2H4 from the balanced equation = 2 x 32.05 = 64.1g
Molar mass of N2 = 2x14.01 = 28.02g/mol
Mass of N2 from the balanced equation = 3 x 28.02 = 84.06g
Summary:
From the balanced equation above,
92.02g of N2O4 reacted with 64.1g of N2H4 to produce 84.06g of N2.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
92.02g of N2O4 reacted with 64.1g of N2H4.
Therefore, 50g of N2O4 will react with = (50 x 64.1)/92.02 = 34.83g of N2H4.
From the calculations made above, we can see that only 34.83g out 45g of N2H4 is required to react completely with 50g of N2O4.
Therefore, N2O4 is the limiting reactant and N2H4 is the excess reactant.
Finally, we shall determine the mass of N2 produced from the reaction.
In this case the limiting reactant will be used as it will produce the maximum yield of N2 since all of it is used up in the reaction.
The limiting reactant is N2O4 and the mass N2 produced can be obtained as illustrated below:
From the balanced equation above,
92.02g of N2O4 reacted to produce 84.06g of N2.
Therefore 50g of N2O4 will react to produce = (50 x 84.06)/92.02 = 45.7g of N2.
Therefore, 45.7g of N2 were produced from the reaction.
At the end of the day,
The limiting reactant is N2O4 and 45.7g of N2 were produced from the reaction.
Based on the type or types of intermolecular forces, predict the substance in each pair that has the higher boiling point Given the molecules propane (C3H8) and n-butane (C4H10)_________ has the higher boiling point mainly due to_______ Given the molecules diethyl ether (CH3 CH2OCH2 CH3) and 1-butanol (CH3 CH2CH2 CH2OH) higher boiling point mainly due to______________ .
Answer:
See explanation
Explanation:
-) Given the molecules propane (C3H8) and n-butane (C4H10) n-butane has the higher boiling point mainly due to a larger chain of carbons.
In this question, in propane, we have a chain of three carbons. In butane, we have fourth carbons. If we have more carbons we will have more interactions. If we have more interactions we have to give more energy to go from liquid to gas, therefore we will have a higher boiling point.
-) Given the molecules diethyl ether (CH3 CH2OCH2 CH3) and 1-butanol (CH3 CH2CH2 CH2OH) 1-butanol has a higher boiling point mainly due to hydrogen bonding.
In the case of butanol, we have the "OH" group. If we have a hydrogen bond to a heteroatom (O, S, P, or N) we will have the presence of this type of interaction between molecules. If we have more interactions we have to give more energy to go from liquid to gas, therefore we will have a higher boiling point.
I hope it helps!
Describe the formation of an aqueous libr solution when solid libr dissolves in water
Fill in the blanks with words given below.
K and I atoms
K and IF ions
dissociation
atoms
KI molecules
polar dilution
hydration
molecules ions
nonpolar
At the_______ surface of the solid _____________are pulled into solution by___________ the water molecules, where the______________ process surrounds separate with water molecules.
Answer and Explanation:
The water is a polar solvent which dissolves into the LiBr molecules and converts into [tex]Li^+[/tex] and [tex]Br^-[/tex] ions far from the solid also into the solution, when they are hydrated.
Now, the complete words are as given below:-
The [tex]K^+[/tex] and [tex]I^-[/tex] ions at the surface of the solid are pulled into the solution by the polar water molecules, where the hydration process surrounds separate ions with water molecules.
LiBr has been the ionic compound and has been dissociated in the water by the force of the polar water molecules. The water molecules that have been polar in nature exert the force onto the ionic compounds and help in the dissociation.
At the dissociation surface of the solid KI molecules, are pulled into the solution by the polar water molecules, where the hydration process surrounds ions and separates them with water molecules.
For more information about the hydration process, refer to the link:
https://brainly.com/question/939764
A student wants to prepare a salt starting with H2SO4. Select all of the compound types that can react with H2SO4 to form a salt.
1. salt
2. acid
3. acid salt
4. basic oxide
5. base
6. metal
7. acidic oxide
Answer:
4 and 6 would work for this
which factor is most responsible for the fact that water is a liquid rather than a gas at room temperature
The answer is Hydrogyn bonding. It keeps the water molocules bonded together and in a liquid state, without it it'd be in a gashious state.
Answer:Hydrogen bonds keep them together in room temperature, hope this helps!
Explanation:
<!> Brainliest is appreciated! <!>