Scientists often use models to study the movement of continents. Why might scientists use a model to show this movement? A. Extremely fast movement is not easily observed directly. B. Extremely slow movement is not easily observed directly. C. Extremely complex movement is not easily observed directly. D. Extremely dangerous movement is not easily observed directly.​

Answer:

We want to have an acceleration of:

A = 1.5*g = 1.5*9.8m/s^2  = 14.7 m/s^2

When the rim is moving at 37m/s while spinning.

Now, in circular motion we have two accelerations.

Tangential acceleration, that is the one related to the change of speed, as we have a speed of 37m/s, we can assume that is constant, then the tangential acceleration is zero.

Centripetal acceleration, is the one related to the change in direction, is perpendicular to the velocity vector and is the one that allows the circular motion.

I suppose that in this problem we want to have a  centripetal acceleration of 14.7m/s^2

The equation for the centripetal acceleration is:

Ac = v^2/r

Where v = velocity and r = radius.

then we must solve:

14.7m/s^2 = (37m/s)^2/r

r = (37m/s)^2/14.7m/s^2 = 93.13 m

Answer:

given us,

initial velocity (u)= 45m/s

time(t)= 1 min

final velocity (v)=?

here,

average acceleration = v-u/t

= v- 45/1

v= 45/1

:. v=45m/s

:. the average acceleration of the car in m/s^2 is 45m/s

Explanation:

we can use acceleration formula

Answer:

Positive

Explanation:

Tbh I dont have an explanation I just wanted to give the answer but its for sure correct!

Answer:

force×distance

Explanation:

work is the ability of an object to move a distance as a result of the force being applied

Answer:

a

Explanation:

it increases with increasing height

Answer:

Explanation:

According to equation of motion;

\sum F = ma

m is the mass of the body

a is the acceleration

\sum F = Fm - Ff (along the horizontal)

Fm is the moving force

Ff is the frictional force

Given;

Fm = 12N

Ff = nR = nmg

Ff = n(4)(9.8)

Ff = 39.2n

Substitute the given value into the expression above;

Fm - Ff = ma

12 - 39.2n = 4(2)

-39.2n = 8-12

-39.2n = -4

n = 4/39.2

n = 0.1

Hence the coefficient of kinetic friction between the table and jug is 0.1

Answer:

Both the initial and final substances are composed of atoms because all matter is composed of atoms. According to the law of conservation of matter, matter is neither created nor destroyed, so we must have the same number and kind of atoms after the chemical change as were present before the chemical change.

Explanation:

Answer:

The law of conservation of atoms is simple but it has a great affect. An atom cannot be destroyed by such a force. Matter/atoms can't be created by any means. An atom exits only by nature and not by force.

Hope this helped! Please mark brainliest! Have a great day!

Answer:

a = 0.98J

Explanation:

PE = mgh

PE = 0.1 x 9.8 x 1

PE = 0.98J

(a) The potential energy of the car at the beginning of the experiment is 9.8(m) J.

(b) The kinetic energy of the car for group a is 3.125(m) J.

(c) The kinetic energy of the car for group b is 4.5(m) J.

The potential energy of the car is calculated as follows;

P.E = mgh

where;

P.E = m x 9.8 x 1

P.E = 9.8(m) J

K.E = ¹/₂mv²

K.E = ¹/₂ x m x (2.5)²

K.E = 3.125(m) J

K.E = ¹/₂mv²

K.E = ¹/₂ x m x (3)²

K.E = 4.5(m) J

Learn more about kinetic energy here:https://brainly.com/question/25959744

#SPJ2

Answer:

The reactivity of metals increases as you move left in a period and as you move down in a group, so Marie needs to know the period and group of the element inside each box. Boxes that show locations in groups 1 or 2 or in period 8 contain the most reactive elements.

Explanation:

Answer:

The Group Number of the elements.

Explanation:

If Marie knew the group number of the elements, then she could determine the amount of valence electrons each element has and their reactivity rate. For example, if one box tells her that an element is located in group 18, then she could determine that the element is not very reactive. This is because elements in group 18 have 8 valence electrons, which makes them stable/unreactive.

Hope this helps!

Answer:

The diagram doesn’t tell you anything about the force on the asteroid. It only gives information about the force on the planet and the moon.

Explanation:

Answer:

A divergent boundary occurs when two tectonic plates move away from each other. Along these boundaries, earthquakes are common and magma (molten rock) rises from the Earth's mantle to the surface, solidifying to create new oceanic crust. When two plates come together, it is known as a convergent boundary.

Explanation:

Answer:

F₃ = 122.88 N

θ₃ = 20.63°

Explanation:

First we find the components of F₁:

For x-component:

F₁ₓ = F₁ Cos θ₁

F₁ₓ = (50 N) Cos 60°

F₁ₓ = 25 N

For y-component:

F₁y = F₁ Sin θ₁

F₁y = (50 N) Sin 60°

F₁y = 43.3 N

Now, for F₂. As, F₂ acts along x-axis. Therefore, its y-component will be zero and its x-xomponent will be equal to the magnitude of force itself:

F₂ₓ = F₂ = 90 N

F₂y = 0 N

Now, for the resultant force on ball to be zero, the sum of x-components of the forces and the sum of the y-component of the forces must also be equal to zero:

F₁ₓ + F₂ₓ + F₃ₓ = 0 N

25 N + 90 N + F₃ₓ = 0 N

F₃ₓ = - 115 N

for y-components:

F₁y + F₂y + F₃y = 0 N

43.3 N + 0 N + F₃y = 0 N

F₃y = - 43.3 N

Now, the magnitude of F₃ can be found as:

F₃ = √F₃ₓ² + F₃y²

F₃ = √[(- 115 N)² + (- 43.3 N)²]

F₃ = 122.88 N

and the direction is given as:

θ₃ = tan⁻¹(F₃y/F₃ₓ) = tan⁻¹(-43.3 N/-115 N)

θ₃ = 20.63°

If no heat is lost to the surroundings, the final temperature of the system is 100 C°,  At the final temperature, 0.0214 kg and 0.219 kg kilograms are there of steam and how many of liquid water

heat can be defined as the form of energy that is spontaneously transferred from one object to another object as the differences in temperatures is otherwise called as heat transfer.

The Heat transfer occurs  upto the  equilibrium point of an object has been reached.

Internal Energy is the total amount of energy of all the molecules of a body is the internal energy within the object.

Specific Heat or heat capacity, is   the amount of energy required to produce a unit change in its temperature.

For more details  heat,  visit

brainly.com/question/13411214

#SPJ5

If a  ball is thrown horizontally at a height of 2.20 meters at a velocity of 65.0 m/s. Assuming no air resistance, then the distance traveled by the ball horizontally when it hit the ground would be  43.55 meters.

There are three equations of motion given by Newton,

v = u + at

S = ut + 1/2 × a × t²

v² - u² = 2 × a × s

As given in the problem If a ball is thrown horizontally at a height of 2.20 meters at a velocity of 65.0 m/s. Assume no air resistance.

S = ut + 1/2 × a × t²

2.2 = 0 + 0.5 × 9.8 ×  t²

t² = 2.2 / 4.9

t = 0.67 seconds

The horizontal displacement of the ball = 0.67 × 65

                                                                  = 43.55 meters

Thus, the distance traveled by the ball horizontally when it hit the ground would be  43.55 meters.

To learn more about equations of motion here, refer to the link given below ;

brainly.com/question/5955789

#SPJ2

Answer:

E, F, A, C

Explanation:

They cannot change the way a trait is observed

Mutations could change protein shape(A), could cause genetic disorders and harm you(E), could actually be beneficial and cause adaptations to your environment(F), or they could be neutral in which no changes are observantly notable(C).

Hope this helps

Answer:

The magnitude and direction of the resultant is 8.66 N and [tex]60^{\circ}[/tex] south of East.

The magnitude and direction the equilibrant is 8.66 N and [tex]60^{\circ}[/tex] North of West respectively.

Explanation:

Let

[tex]P=5\ \text{N}\ \text{south}[/tex]

[tex]Q=5\ \text{N}\ 30^{\circ}\ \text{south of east}[/tex]

[tex]\theta[/tex] = Angle between P and Q = [tex]60^{\circ}[/tex]

Magnitude of resultant

[tex]R=\sqrt{P^2+Q^2+2PQ\cos\theta}\\\Rightarrow R=\sqrt{5^2+5^2+2\times 5\times 5\cos60^{\circ}}\\\Rightarrow R=8.66\ \text{N}[/tex]

Direction is given by

[tex]\theta=\tan^{-1}\dfrac{Q\sin\theta}{P+Q\sin\theta}\\\Rightarrow \theta=\tan^{-1}\dfrac{5\sin60^{\circ}}{5+5\sin60^{\circ}}\\\Rightarrow \theta=30^{\circ}[/tex]

The magnitude and direction of the resultant is 8.66 N and [tex]30^{\circ}+30^{\circ}=60^{\circ}[/tex] south of East.

The magnitude and direction the equilibrant is 8.66 N and [tex]60^{\circ}[/tex] North of West.

Answer:

I don't know the answer

Answer:

koj ruam zog

Explanation:

Answer:

the answer of 7th question

Make sure your dishwasher is full before you use it – running a half-empty dishwasher wastes large amounts of energy

Try to use a cooler temperature

Consider drying your clothes outside if it’s warm instead of using the dryer

Turn off the fan when you leave a room

Close your drapes or drop your window shades during the day.

Wash your clothes in cold water.

Wrap or cover foods and drinks in the refrigerator.

Always use the cold water faucet, unless you really want hot water.

the answer of 10th question

Static electricity is used in pollution control by applying a static charge to dirt particles in the air and then collecting those charged particles on a plate or collector of the opposite electrical charge. These devices are commonly known as “electrostatic precipitators.

Answer: thermal energy

Explanation: hope this helps

Answer:

Mechanical advantage = 20

Explanation:

Given:

Output force = 8,000 N

Input force = 400 N

Find:

Mechanical advantage

Computation:

Mechanical advantage = Output force / Input force

Mechanical advantage = 8,000 / 400

Mechanical advantage = 20

Answer:

Output varies

Explanation:

Here the outputs of gallons of gasoline and flight fuel is mentioned of two refineries namely Refinery EM and Refinery CG. The output has been mentioned with respect to one barrel of crude oil. So, one barrel of crude is used by both the refineries.

So, here the output (gallons of gasoline and flight fuel) varies while the input (one barrel of crude oil) remains constant.

Answer:

TRUE

Explanation:

The answer is true.

Balance forces acting on a body will not change the motion of the body because the body experiences no net resultant force in one direction. When any body experiences equal forces with opposite directions, the net force or the resultant force experience by the body is zero.

In case of an unbalanced forces, there is a net force acting in one direction and so it causes the body to change in its state of motion in the direction of the net force.

Answer:

Formula for mass: m=f/a

m=600/3

The mass is 200.

Explanation:

Hope this helps!

Answer: c living in a camber in an under water habitat

Explanation:

Answer:

the acceleration of gravity is 1.62

Explanation:

w=mg

141=87g

141/87=87g/87

1.62=g

Answer: Terminal velocity is achieved, therefore, when the speed of a moving object is no longer increasing or decreasing; the object's acceleration (or deceleration) is zero.

Explanation:.

Answer: Terminal velocity is achieved, therefore, when the speed of a moving object is no longer increasing or decreasing; the object's acceleration (or deceleration) is zero.

As others have said, 8 seconds to get to 90% of terminal velocity. But if you're falling from outer space, you could reach speeds much higher than terminal velocity, and slow down when you reach the atmosphere. If coming in from a long distance, you'll burn up like a meteorite.

Explanation:

Answer:

no one ever amswers my questions

The others are:

Ampere

Mol

Candela

Answer:

hope it is helpful to you

Answer:

mag aral ka bubu

Explanation:

ang tanga mu hahahahhaha luko nandyan lang naman yan hahahhahahahahahahhahahahahahahahhahahahahahaahahahahahahahhahahahahahahahahahahahahaahhahahaahahhaahha09561782