Answer:
False
Explanation:
Many abused drugs are prescription drugs.
please if you know help
the formula of copper sulfate crystals is CuSo4.5H2O. 400ml of 0.02mol/l copper (ii) sulfate solution is needed to be prepered .
a. calculate the molar mass of the solute .
b. calculate the mass of the solute that sould be weighted to prepare this solution .
c. describe in details the steps of preperation of the solution
Answer: a. 249.5 g/mol
b. 1.996 g
c. Measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve in water until the volume is 400 ml
Explanation:
Molar mass is the sum of atomic masses of all the elements present.
Thus molar mass of [tex]CuSO_4.5H_2O[/tex] = 1(63.5)+1(32)+4(16)+5(18) = 249.5 g/mol
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{given mass of solute}\times 1000}{\text {Molar mass of solute}}\times \text{Volume of solution in ml}}[/tex]
[tex]0.02mol/L=\frac{x\times 1000}{249.5g/mol\times 400}[/tex]
[tex]x=1.996 g[/tex]
c. We need to measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve it in water to make the volume 400 ml.
Which is the correct formula for the ionic compound that results from these two atoms? PLS HELP!!!
Answer:
If I am not wrong is C x2y5
Explanation:
The concept of valency is used here to determine the formula of the ionic compounds. The number of valence electrons in 'X' is 2 and that of 'Y' is 5. The formula is X₃Y₂. The correct option is D.
What is an ionic compound?The crystalline solids which are formed by neatly packed ions of opposite charges are defined as the ionic compounds. These compounds are formed by the combination of metals with non-metals.
The combining capacity of an element is given by valency. The elements belonging to the same group have the same valency. It is related to how many electrons are in the outer shell.
Here the number of valence electrons in 'X' = 2
The number of valence electrons in 'Y' = 5
The element 'X' need 6 electrons to attain the octet and 'Y' needs 3 electrons to attain the octet.
X - 6
Y - 3
The formula of the ionic compound is X₃Y₂.
To know more about ionic compound, visit;
https://brainly.com/question/3222171
#SPJ2
How do the terms denature, catalyst, active site, and substrate relate to each other
Explanation:
The enzyme 's active site binds to the substrate. Increasing the temperature generally increases the rate of a reaction, but dramatic changes in temperature and pH can denature an enzyme, thereby abolishing its action as a catalyst. ... When an enzyme binds its substrate it forms an enzyme-substrate complex.
friend,please mark my answer in brainliest answersfriend,please follow me friend,please thanks this answerfriend,please vote it 5 starThe rock in a particular iron ore deposit contains 78% Fe2O3 by mass. How many kilograms of the rock must a mining company process to obtain 1.0 x 103 kg of iron?
Answer:
103 so easy so free dogwater
Explanation:
Mass percentage does not have any unit as numerator and denominator contains the same unit. The mass of rock is 2.56×10⁶g when it contains 1.0 x 10³ kg of iron in it.
What is percentage by mass?Mass percentage represents the the percentage of each element that is making a particular compound.
Mathematically,
Percentage of mass = (component’s mass ÷ total mass) x 100%
Percentage of mass of ferric oxide is = 78% by mass in rock
From this we can interpret the following
100 g of rock contains = 78gram ferric oxide
(100÷78)g of rock contains= 1 gram of ferric oxide
mass of iron in rock =1.0 x 10³ kg = 1.0 x 10⁶ g
(100÷78)×1.0 x 10⁶ g of rock = 1.28×10⁶g of ferric oxide
now 1 mole of ferric oxide contains 2 atoms of iron, so the total mass of iron is 1.28×10⁶g ×2=2.56×10⁶g of iron.
Therefore the mass of rock is 2.56×10⁶g when it contains 1.0 x 10³ kg of iron in it.
To learn more about mass percentage, here:
https://brainly.com/question/27429978
#SPJ2
Describe particle movement in solid,liquid and gas
Answer:
In a solid, they're really close together and vibrate a LITTLE, in a liquid they're kinda close together but change movement because water will change shape depending on the container they're in. For gas they are spread far from each other and vibrate A LOT
Explanation:
What’s the answer???
Answer:
Well I know that the first one is true.
Explanation:
Answer:
1. TRUE
2. FALSE
3. C
Explanation:
24) Which of these lists the order of sublevels by INCREASING energy? *
3d, 4s, 4p
4s, 3d, 4p
4p, 3d, 4s
4s, 4p, 3d
Answer:
4s, 3d, 4p
Explanation:
(3d,4s,4p) and (4p, 3d, 4s) both are decreasing energy, while (4s,4p,3d) is incorrect order it should be (4s,3d,4p).
1. How are atoms held together? What is the attraction between?
Answer:
the atom is held together by the electrostatic attraction between the positively charged nucleus and the negatively charged electrons surrounding it, the stability within chemical bonds is also due to electrostatic attractions.
Explanation:
Answer:
Some type of bond (example: hydrogen bonds between water)
Polarity can also hold atoms together
hope this Helped!
Please help!!!
Which statement about the manufacture of aluminium by electrolysis is correct?
А Aluminium ions are oxidised to aluminium by gaining electrons.
B Aluminium is extracted from its ore hematite. .
с Molten cryolite is used to dissolve the aluminium oxide.
D Oxygen is formed at the negative electrode.
Molten cryolite is used to dissolve the aluminum oxide is correct.
What is electrolysis?
Electrolysis is a process used to split molecules by passing an electric current through a solution containing ions. It works because the ions in the solution are attracted to the opposite charge of the electrodes in the electrolysis cell. The ions travel towards the electrodes and are either removed from the solution (oxidation) or released into it (reduction). This process is used in a variety of industries, such as metals refining, wastewater treatment, and electroplating.
The process of extracting aluminum from its ore, usually bauxite, involves electrolysis. In this process, the ore is dissolved in molten cryolite and an electric current is passed through it, leading to the oxidation of aluminum ions at the anode and the reduction of oxygen at the cathode. The aluminum is then extracted as a molten metal.
Therefore, option C is the correct answer.
To learn more about electrolysis the link
https://brainly.com/question/12054569
#SPJ1
Why are constellations and predictable locations in the night sky but planets are hard to find
Answer:
Because you can see the stars everynight pretty much, but the planets you need a telescope for. Plus, the planets are moving everynight making night and day so they all move! :)
Explanation:
Hope this helps! Brainliest plz?
how do we know that all the continents were all together at one point in time. writing prompt and it has to be at least 7 sentences
Answer:
We can tell by how the continents look. Scientists who propose the pangea theory have said this. You can see for yourself because all the continents look like puzzle pieces you could put together. Scientists can also tell from the species. For example, let's say a scientist found a bone of a creature at the edge of a continent, the edge of another would have the same species. They have also calculated that the continents in itself are still splitting apart, but very slowly. The reason they split up was because tectonic plate movements.
7. Cecilia puts two magnetic toy trains very close to each other on a track. What will happen next, and
why.
9. What is the atomic number of the atom in the diagram above?
Answer:
the atomic number of the atom can be determine through the number of protons in the nucleus
The protons are usually the atomic number.
Which of the following reactions is NOT properly classified?
(A) Synthesis - MgO + CO2 → MgCO3
(8) Decomposition - 2 Fe(OH)3 → Fe2O3 + 3 H2O
(c) Combustion - CO2 + 2 H2O → CH4 + 2 02
(D) Synthesis – 2 Na + Cl2 → 2 NaCl
How hot is magma?
27 points
Answer:
2200 degrees Fahrenheit
Explanation:
700°C to 1300C where's my points at
On the periodic table, what is a group? For the main groups, what characteristic
do the elements have in common?
In modern times, we know that the elements in a given group (also known as a family or column) have the same number of valence electrons, with ground state configurations having a consistent pattern, for instance:
F 1s2 2s2 2p5, Cl 1s2 2s2 2p6 3s2 3p5, Br 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p5, etc.
Of course, the ground state configurations play a major role in determining how an element reacts and what compounds it forms. Thus, the elements in a given group have similar properties.
The structure of the table also predicts how the properties vary. For instance, atomic radius increases down a group as does metallic character.
Hope this helps have a awesome day/night✨Explanation:
(SCIENCE) HURRY HELP!!
Anabolic steroids are especially dangerous for teenagers whose bones are still growing.
true or false
Answer:
True
Explanation:
Generally makes sense.
What is the main purpose of the excretory system?
Question 6 options:
To cause movement of the body
To respond to stimuli
To transport nutrients
To remove waste products
Answer:
To remove waste products
Explanation:
I think
Answer:
to remove waste products
name the following compound Mol2
Answer:
you cant answer this
Explanation:
you left something out of the question
Which of the following will dissolve most rapidly?
A) Sugar cubes in cold water
B) powdered sugar in hot water
C) powdered sugar in cold water
D) sugar cubes in hot water
Answer:
The correct answer to your Question is B.
Explanation:
Hope you have a great day :)
The substance from the options that will dissolve most rapidly is : ( B ) Powdered sugar in hot water.
Factors responsible for solubilityIncrease in temperature, state of solute and volume will determine the rate at which solubility occurs. The powdered sugar is in less solid state when compared to sugar cubes and therefore will dissolve most rapidly in hot water than a sugar cubes in hot water.
Hence we can conclude that The substance from the options that will dissolve most rapidly is : ( B ) Powdered sugar in hot water.
Learn more about solubility : https://brainly.com/question/23946616
#SPJ2
What’s the answer????
Answer:
1. C
2. A
3. A
Explanation:
This environment has a lot of trees high temperatures and high humidity all year long which environment is this describing
Answer:
Rainforest
Explanation:
rainforests tend to have high humidity, explaining why you always sweat there. and including high temps.
What size volumetric flask would you use to create a 1.25 M solution using 29.75 g of MgCl2?
Answer:
250 ml
Explanation: I got it right on the lab.
The size of the volumetric flask that would you use to create a 1.25 M solution using 29.75 g of MgCl₂ is 250mL.
How do we calculate volume of the solution?
Volume (V) in liter of the solution will be calculated by using the molarity (M) formula as:
M = n/V, where
n is the moles of the solute and it will be calculated by using mass as:
n = W/M, where
W = given mass
M = molar mass
Moles of 29.75g of MgCl₂ = 29.75g / 95g/mol = 0.313 mol
Given that molarity of solution = 1.25M
On putting values on the equation of molarity we will get the value of volume as:
V = 0.313 / 1.25 = 0.2504 L = 250mL
For the preparation of 250 mL of MgCl₂ solution we required the volumetric flask of 250 mL.
Hence volumetric flask of 250mL is required.
To know more about volumetric flask, visit the below link:
https://brainly.com/question/24196698
#SPJ2
An alloy of sodium and potassium is used as a coolant due to its
A.high thermal conductivity
B.physical state
C.high reactivity
D.all except c
Answer:
A
Explanation:
Because It's dense meaning that it doesn't burn
Explanation:
https://youtu.be/f_kgUUaMZlw
How would you calculate an object’s mechanical energy?
After one week there was a white solid but no liquid in the dish. What had happened to the water in the dish?
Answer:
it disappeared loll jk
it obviously dried
well you may Mark me as brainliest
Hey.... If I got a question in my exams of which metal does not react with hydrochloric acid and I write gold as the answer, will I get full marks on that questiona dn the whole exam paper in total????
Answer:
I think you would pretty much get the answer wrong.
You won´t get full credit. sorry for your wrong test answer, :(
Explanation:
The correct answer would be copper and mercury do NOT react with hydrochloric acid.
2NaHCO3 + 3CaCl2 → CaCO3 + 2NaCl + H2O + CO2
Which statement is true about the equation above?
There are 3 chlorines on the reactant side and 3 chlorines on the product side of this equation.
There are 3 chlorines on the reactant side and 3 chlorines on the product side of this equation.
There are 3 calciums on the reactant side and 2 calciums on the product side of this equation.
There are 3 calciums on the reactant side and 2 calciums on the product side of this equation.
There are the same number of oxygen atoms in the reactants and the products. There are the same number of oxygen atoms in the reactants and the products.
This equation does not follow the law of conservation of mass.
Answer:
There are the same number of oxygen atoms in the reactants and the products
Explanation:
However the equation is not balanced
3 Ca on one side and 1 on the other
HELP ME WILL MARK BRAINIEST
Nitrogen is an element. What is the smallest particle of nitrogen that has all the properties of nitrogen?
Answer:
The structure of the atom.
Explanation:
The correct answer is - The structure of the atom.
Reason -
An atom is the smallest unit of matter that retains all of the chemical properties of an element.