More water is better but not always because access to water or sunlight is harmful to plants.
What is the importance of water?Water is an important part not only for plants to run the ecosystem it is always important but in a fixed amount not in a large quantity as access to anything is harmful t the environment as access to water can also damage the ecosystem.
Water is said to be life for plants but more water leads them not to grow in a manageable way like access to water in the soil will not allow the soil to hold the plant for growing plants will float on sol and the root will not be able to grow.
Therefore, water is essential always but in fixed quantity not in the large amount in access.
Learn more about the importance of water, here;
https://brainly.com/question/7977819
#SPJ2
chemistry semester 2
Calculate the molecular weight of guanylate at pH 7. Show your work. Draw the structures of three different tautomers of hypoxanthine. One of the nonstandard nucleotides that appears moderately often in rRNA and tRNA is dihydrouridine. Which carbon atoms within the uracil moiety of this nucleotide have two hydrogens each attached to them
Answer:
Explanation:
The molecular formula for Guanylate is [tex]\mathbf{C_{10} H_{14} N_5O_8 P}[/tex]
This is calculated by the addition of the atomic weight of all the atoms taking part in the molecule.
i.e. (10 × C) + (14 × H) + (5 × N) + ( 8 × O) + (1 × P)
= (10 × 12) + (14 × 1) + (5 × 14) + ( 8 × 16) + (1 × 30)
= 120 + 14 + 70 + 128 + 30
= 362 g/mol
The diagram for the tautomers of hypoxanthine can be seen in the image attached below.
Dihydrouridine is available and can be seen in tRNAs and rRNAs. It is an exceptionally preserved and adjusted base. It is a pyrimidine nucleoside that is shaped by the expansion of two hydrogen atoms to uridine. By the expansion of two hydrogen atoms to uridine makes it completely soaked and no presence of any two-fold or double bond.
Catalytic reduction of carbon-carbon double bonds in Dihydrouridine synthase occurs at positions 5 and 6 on the uridine base.
Hence, 5 and 6 carbon particles inside the uracil moiety of this nucleotide have two hydrogens each connected to them.
Atoms that have the same number of outer electrons
OA.
are all metallic elements.
B. must be atoms of the same element.
OC.
are all nonmetallic elements.
OD.
belong to the same family of elements.
Moby eats three-sixths of a pizza. Which fraction is equivalent to three-sixths?
Answer:
1/2
Explanation:
Half of 6 is 3 so therefore it is a half.
Two adaptations to plants are described below:
Adaptation 1: A hornwort is a nonflowering plant that produces a large number of spores instead of seeds.
Adaptation 2: A kangaroo paw has tiny, woolly hairs on it that help it hold onto water droplets.
Which statement is true about these adaptations?
Answer:
The answer is D
Explanation:
The hornwort is telling what that exact plant does and the kangaroo paw is telling what they do physically to hold onto water
The first adaptation is to the life cycle, and the second is to the physical traits thus, the kangaroo paw describes what they physically do to hold onto water, and the hornwort describes what that particular plant performs. So, the correct option is D.
What is Adaptation?A species or organism gradually grows more accustomed to its surroundings through the process of adaptation. The behavioral or physical characteristics of an animal that improve its ability to thrive in its ecosystem are referred to as adaptation. Animals can adapt by changing how they look to hide from predators (camouflage). To survive in their habitats, different species have evolved various adaptations.
In the above given example, the life cycle is the first adaptation, and the physical characteristics are the second. Therefore, the hornwort defines what that particular plant does, and the kangaroo paw represents what they physically do to hold onto water.
Therefore, the correct option is D.
Learn more about Adaptation, here:
https://brainly.com/question/28881538
#SPJ3
A sample of hydrogen gas occupies
1.0 L at 760 torr in a balloon. If the
temperature is kept constant, which
expression represents the volume of
hydrogen gas in liters when the
pressure is raised to 860 torr?
A 860 + 760
B 860 – 760
C 860 / 760
D 760 / 860
When the pressure of a sample of hydrogen gas increases from 760 torr to 860 torr, the expression D 760 / 860 represents the volume of hydrogen gas in liters.
What does Boyle's law state?Boyle's law is a law stating that the pressure of a given mass of an ideal gas is inversely proportional to its volume at a constant temperature.
A sample of hydrogen gas occupies 1.0 L at 760 torr in a balloon. We can calculate the volume when the pressure is increased to 860 torr using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = (P₁/P₂) × V₁
V₂ = (760 torr/860 torr) × 1.0 L = 0.88 L
where,
P₁ and V₁ are the initial pressure and volume.P₂ and V₂ are the final pressure and volume.When the pressure of a sample of hydrogen gas increases from 760 torr to 860 torr, the expression D 760 / 860 represents the volume of hydrogen gas in liters.
Learn more about Boyle's law here: https://brainly.com/question/469270
PLEASE ANYONE KNOW IT!!!!!
I think it's ethane. It might be wrong tho.
Predict what will be observed in each experiment below. experiment predicted observation.
1. A student sees tiny bubbles clinging to the inside of an unopened plastic bottle full of carbonated soft drink. The student squeezes the bottle.
a. The bubbles will shrink, and some may vanish.
b. The bubbles will grow, and more may appear.
c. The bubbles won't change.
d. I need more information to predict what will happen to the bubbles.
2. A student has two unopened cans containing carbonated water. Can A has been stored in the garage () and can B has been stored in the fridge (). The student opens one can at the time, both cans make a fizz.
a. Can A will make a louder and stronger fizz than can B.
b. Can B will make a louder and stronger fizz than can A.
c. The fizz will be the same for both cans.
d. There is not enough information to predict which can will make the louder fizz.
Answer:
The correct answer is -
1. a) The bubbles will shrink, some may vanish.
2. a) Can A will make a louder and stronger fizz than can B.
Explanation:
In the first question, it is given that the bottle is not opened and therefore, squeezing the bottle filled with a carbonated drink will increase the pressure on the carbonated liquid which forces the bubbles to dissolve or displace or vanish as it moves to empty space.
Thus, the correct answer would be - The bubbles will shrink, some may vanish
In the second question, there are two different conditions for two different unopened cans of carbonated water that are different temperatures one at the garage with higher temperature and one in the fridge at low temperature. As it is known that higher the temperature less will be solubility of gas in liquid so gas in can A will be less soluble which means it has more gas and it will make louder and stronger fizz than B which was stored at low temperature.
thus, the correct answer would be - Can A will make a louder and stronger fizz than can B.
Consider the structures of benzaldehyde and benzyl alcohol. Benzene ring with a CH2OH attached Benzene ring with an aldehyde group attached. These two structures can be distinguished by proton NMR. The hydrogen of the aldehyde group will appear downfield between 9 and 11 ppm and there is Choose... for the alcohol. Also, the methylene hydrogens in the benzyl position of the alcohol will be the only significant Choose... peak between the two structures.
Answer:
no equivalent peak, upfield between 0 and 3 ppm
Explanation:
NMR stands for nuclear magnetic resonance. It is a spectroscopic technique that is used for observing the local magnetic fields around an atomic nuclei. It is used to study the chemical, physical and biological properties of the matter.
In the context, the structures of the benzaldehyde and the benzyl alcohol are distinguished by the proton NMR. The hydrogen atom of aldehyde appears downfield between 9 and 11 ppm and also there is no equivalent peak for the alcohol.
The methylene hydrogens will only be significant upfield between the 0 and 3 ppm peak between the given structures.
why is a saturated solution of magnesium hydroxide less basic than a saturated solution of potassium hydroxide?
A.) magnesium hydroxide is less soluble than potassium hydroxide
B.) magnesium is less basic than potassium
C.) magnesium hydroxide solutions are just as basic as potassium hydroxide solutions
D.) when magnesium hydroxide dissolved the hydroxide ion is partially neutralized
Answer:
letter C I'm not sure to my answer but hope it can hrlp
The reason why magnesium hydroxide is less basic than a saturated solution of potassium hydroxide is that magnesium hydroxide is less soluble than potassium hydroxide.
What is a saturated solution?A saturated solution is one that contains as much solute as it can normally hold at a particular temperature.
We know that magnesium hydroxide is less soluble than potassium hydroxide. Hence, the reason why magnesium hydroxide is less basic than a saturated solution of potassium hydroxide is that magnesium hydroxide is less soluble than potassium hydroxide.
Learn more about saturated solution:https://brainly.com/question/1851822
#SPJ2
A solution contains 6 mg isopropanol dissolved in 2 kg H2O. The isopropanol concentration is
a.3% isopropanol.
b.3 M isopropanol.
c.3 m isopropanol.
d.3 ppm isopropanol.
Answer:
Option D. 3 ppm isopropanol
Explanation:
The following data were obtained from the question:
Mass of isopropanol = 6 mg
Mass of water = 2 Kg
Isopropanol concentration =?
The isopropanol concentration can be obtained as follow:
Concentration = mass isopropanol / mass of water
Isopropanol concentration = 6 mg / 2 kg
Isopropanol concentration = 3 mg/Kg
Finally, we shall convert 3 mg/Kg to ppm. This can be obtained as follow:
1 mg/Kg = 1 ppm
Therefore,
3 mg/Kg = 3 ppm
Thus, we can conclude that the concentration of isopropanol is 3 ppm.
what is conductor?
give two examples.
Answer:
Conductor is any material tht allows he flow of electrons or electric current . Ex: Metals like iron and copper.
Hope im right!!
Answer:-
Examples of conductors include metals, aqueous solutions of salts (i.e., ionic compounds dissolved in water), graphite, and the human body. Examples of insulators include plastics, Styrofoam, paper, rubber, glass and dry air.Please help due soon.
Answer:
water - Yes because the do drink water
Air - yes they need to breath or alse they would not do good
warmth - yes or they die from coldness
Light - yes to get there food
soil - yes nution for there roots
Explanation:
Hopes it helps
Can light from the sun cause ink to become visible
Yes. Light from the sun can pull energy out of the ink, causing it to become visible
___________________________________
Sorry if wrong
200.0 mL of a 0.600 M solution of KCl is diluted to 600.0 mL. What is
the new concentration of the solution?
Answer:
0.200 M
Explanation:
Begin by finding how many moles of KCl there are by using the molarity and given volume:
[tex]\frac{0.600 mol}{1000 mL} x \frac{200.0 mL}{1} = 0.12 mol KCl[/tex]
(Remember that molarity is mol/L, which is equal to mol/1000 mL.)
Next, divide the moles of KCl by the new volume (after dilution):
[tex]\frac{0.12 mol KCl}{600.0 mL} x \frac{1000 mL}{1 L} = \frac{0.200 mol KCl}{1 L} = 0.200 M[/tex]
The new concentration is 0.200 M.
The new concentration of the KCL solution is 0.200M
HOW TO CALCULATE CONCENTRATION:
The concentration or molarity in mol/L or M of a solution can be calculated using the following formula:C1V1 = C2V2
Where;
C1 = initial concentration of the solution
C2 = final concentration of the solution
V1 = initial volume of the solution
V2 = final volume of the solution
According to the information given in this question, we have the following:V1 = 200mL
V2 = 600mL
C1 = 0.600 M
C2 = ?
C2 = C1V1 ÷ V2
C2 = (0.600 × 200) ÷ 600
C2 = 120 ÷ 600
C2 = 0.2M
Therefore, the new concentration of the KCL solution is 0.200M.Learn more: https://brainly.com/question/4401006?referrer=searchResults
which statement is true about the reaction shown by this chemical equation HCl + NaOH ------> NaCl + H2O
Answer:
A. It is exothermic
Explanation:
This reaction of acid and base represents synthesis reaction because new subsatnces are produced.
What is synthesis reaction?Synthesis reactions are reactions that occur when two different atoms combines to form a different molecule. A synthesis reaction can be represented by the equation i.e. A + B → C. In this equation, the A and B represent the reactants whereas the C represents the product.
So we can conclude that option C is the correct answer which is the synthesis reaction.
Learn more about reaction here: https://brainly.com/question/26018275
seven carbon chain with CH3 attached to second and third carbon
Answer:
2,3-dimethylheptane.
CH₃ - CH - CH-CH₂-CH₂-CH₂-CH₂
| |
CH₃ CH₃
Explanation:
Hello there!
In this case, according to the given instructions, it is possible to draw the organic chemical structure by connecting seven carbon atoms along the parent chain with two methyl substituents at the second and third carbon atoms; thus, the resulting structure is:
CH₃ - CH - CH-CH₂-CH₂-CH₂-CH₂
| |
CH₃ CH₃
Furthermore, the name would be 2,3-dimethylheptane according to the IUPAC rules for nomenclature.
Best regards!
A sealed 1.0L flask is filled with 0.500 mols of I_2 and 0.500 mols of Br_2. When the container achieves equilibrium the equilibrium constant is 1.10x10^{-2}. What is the equilibrium concentration of the product, IBr?
Answer:
[IBr] = 0.049 M.
Explanation:
Hello there!
In this case, according to the balanced chemical reaction:
[tex]I_2+Br_2\rightarrow 2IBr[/tex]
It is possible to set up the following equilibrium expression:
[tex]K=\frac{[IBr]^2}{[I_2][Br_2]} =0.0110[/tex]
Whereas the the initial concentrations of both iodine and bromine are 0.50 M; and in terms of [tex]x[/tex] (reaction extent) would be:
[tex]0.0110=\frac{(2x)^2}{(0.50-x)^2}[/tex]
Which can be solved for [tex]x[/tex] to obtain two possible results:
[tex]x_1=-0.0277M\\\\x_2=0.0245M[/tex]
Whereas the correct result is 0.0245 M since negative results does not make any sense. Thus, the concentration of the product turns out:
[tex][IBr]=2x=2*0.0249M=0.049M[/tex]
Regards!
Solutions, _____ colloids, _____ light.
a) like, will not scatter
b) unlike, will not scatter
c) like, will scatter
d) unlike, will scatter
Answer: unlike, will not scatter
Explanation:
Colloids are unlike solutions because their dispersed particles are much larger than those of a solution. The dispersed particles of a colloid cannot be separated by filtration, but they scatter light, a phenomenon called the Tyndall effect.
Reduction of methanal equation
Answer:
hi
Explanation:
than you for points and thank me if you like
sea stars have radial symmetry .what does this mean?
Answer: Echinoderms usually have five appendages (arms or rays), but there are some exceptions. Radial symmetry means that the body is a hub, like a bicycle wheel, and tentacles are spokes coming out of it (think of a starfish).
Explanation:
Answer:
uesssf
Explanation:
hnjhj
Help please thank you
Answer:
It’s probably plants seed and raise crops for their food
Explanation:
Answer:
I would say b
Explanation:
A hunter would go out to hunt and gathers handle crops or find crops so b.
how many moles of C8 H18 are present in a 546.23 gram sample?
Answer:
Given:
Compound C8H18
mass of compound- 546.23 gram
To find:
number of moles =?
Solution:
let's find out the molar mass of C8H18= 12×8+18×1 = 114 gram/mole
Number of moles= given mass/molar mass
=546.23/114
= 4.7818436487 moles.
Thanks for joining brainly community!
What is the total number of molecules of hydrogen in 0.25 mole of hydrogen?
1
6.0 10^23
2.
4.5 * 10^23
3
3.0 x 10^23
4
1.5 * 10^23
0.25 mole of hydrogen contains 1.5 * 10^23 molecules of hydrogen gas.
We have to know that the number of molecules in one mole of a substance is obtained from the Avogadro's number.
We know that;
1 mole of hydrogen contains 6.02 × 10^23 molecules of hydrogen
0.25 mole of hydrogen contains 0.25 mole × 6.02 × 10^23 molecules/1 mole
= 1.5 * 10^23 molecules
Therefore, 0.25 mole of hydrogen contains 1.5 * 10^23 molecules of hydrogen gas.
Learn more about Avogadro's number: https://brainly.com/question/1445383
the work is in the photo can i get answers please (;´༎ຶٹ༎ຶ`)
Answer:
yes
Explanation:
it is
(10pts) Post-Lab Questions Answer the following questions. (2pts) Suppose the concentration of the NaOH solution was 0.5 M instead of 0.1 M. Would this titration have required more, less, or the same amount of NaOH solution for a complete reaction? Choose... (2pts) Suppose you used 0.5 M NaOH to titrate your vinegar sample instead of 0.1 M. What effect does the concentration of base added have on the reliability of the results of your titration? Choose... (2pts) Consider a 0.238 M aqueous solution of sodium hydroxide, NaOH. How many grams of NaOH are dissolved in 23.46 mL? (2pts) How many individual hydroxide ions (OH−) are found in 23.46 mL? (2pts) How many moles of sulfuric acid, H2SO4, are neutralized by 23.46 mL of 0.238 M NaOH(aq)? [Hint: begin by writing a balanced equation for this neutralization reaction.] Total: -/28 pts
Answer:
A) Less amount of NaOH will be required
B) Reliability decreases with increase in concentration of NaOH solution
C) Mass of NaOH = 0.223 g
D) Number of hydroxide ions = 3.36 × 102²¹
E)Moles of H₂SO₄ neutralized = 0.00279 moles of H₂SO₄
Explanation:
A) Since the number of moles of acetic acid in the vinegar sample is constant, the number of moles of NaOH reacting with acetic acid is constant as well.
Volume = number of moles / concentration
Assuming, number of moles = 1, concentration = 0.1 M
Volume = 1/0.1 = 10
With increase in concentration,
Volume = 1/0.5 = 2
Therefore, less amount of NaOH will be required
B) An increase in concentration of base added will results in lesser volume of based used. This will result in an increase in percentage error as well as decrease innthe accuracy of determining the endpoint. Hence, reliability decreases
C) mass = concentration × volume × molar mass
Molar mass of NaOH = 40.0 g, volume of NaOH = 23.46 mL = 0.02346 L, concentration = 0.238 M
Mass of NaOH = 0.238 × 0.02346 × 40
Mass of NaOH = 0.223 g
D) number of moles of NaOH in 0.223 g = 0.233/40 = 0.00558 moles
1 mole of NaOH produces 1 mole of hydroxide ions; 0.00558 moles of NaOH will produce 0.00558 moles of hydroxide ions
Number of hydroxide ions in 0.00558 moles = 0.00558 × 6.02 × 10²³
Number of hydroxide ions = 3.36 × 102²¹
E) H₂SO₄ + 2 NaOH ----> Na₂SO₄ + 2 H₂O
1 mole of H₂SO₄ requires 2 moles of NaOH for complete neutralization
There are 0.00558 moles of NaOH in 23.46 mL of 0.238 M NaOH solution.
Moles of H₂SO₄ required to neutralize 0.00558 moles of NaOH = 0.00558/2
Moles of H₂SO₄ neutralized = 0.00279 moles of H₂SO₄
The value of Avogadro number is
When a sample of gas was placed in a sealed container with a volume of 3.35 L and heated to
75°C, the gas vaporized and the resulting pressure inside the container was 17atm. How
many moles of the gas were present?. Single line text.
Answer:
Explanation:What is the demand factor for three commercial ranges?
1. What do the colors indicate about the change in average temperature over time from 1884 to
2012?
The colors used to indicate the change in average temperature over time from 1884 to 2012 can vary depending on the specific visualization or representation being used. However, in many temperature visualizations, a common color scheme is employed to represent temperature anomalies or changes relative to a reference period.
In this color scheme, cooler temperatures are often represented by shades of blue or green, while warmer temperatures are depicted by shades of yellow, orange, or red. The intensity or darkness of the colors may also correspond to the magnitude of the temperature change.
For example, if a visualization shows a map with regions colored in blue or green, it suggests that those areas experienced a cooling trend or had lower average temperatures during the specified time period. Conversely, if the map shows regions colored in yellow, orange, or red, it indicates a warming trend or higher average temperatures.
By examining the distribution of colors on the visualization, one can gain insights into the spatial patterns and changes in average temperatures over the specified time frame.
To know more about average temperature here
https://brainly.com/question/31080273
#SPJ2
if you understand please help me x
Answer:
1. Percentage yield is 64.75%
2. Atom economy is 48.39%
Explanation:
1. Determination of the percentage yield
Experimental yield = 24.8 g
Theoretical yield = 38.3 g
Percentage yield =?
Percentage yield = Experimental yield /Theoretical yield × 100
Percentage yield = 24.8 / 38.3 × Percentage yield = 2480 / 38.3
Percentage yield = 64.75%
2. Determination of the atom economy.
The balanced equation for the reaction is given below:
6CO₂ + 6H₂O —> C₆H₁₂O₆ + 6O₂
Next, we shall determine the mass of CO₂, H₂O and C₆H₁₂O₆ from the balanced equation.
Molar mass of CO₂ = 12 + (16×2)
= 12 + 32
= 44 g/mol
Mass of CO₂ from the balanced equation = 6 × 44 = 264 g
Molar mass of H₂O = (2×1) + 16
= 2 + 16
= 18 g/mol
Mass of H₂O from balanced equation = 6 × 18 = 108 g
Molar mass of C₆H₁₂O₆ = (6×12) + (12×1) + (6×16)
= 72 + 12 + 96
= 180 g/mol
Mass of C₆H₁₂O₆ from the balanced equation = 1 × 180 = 180 g
Next, we shall determine the total mass of the reactants. This is illustrated below:
Mass of CO₂ = 264 g
Mass of H₂O = 108 g
Total mass of reactants =?
Total mass of reactant = Mass of CO₂ + Mass of H₂O
Total mass of reactant = 264 + 108
Total mass of reactant = 372 g
Finally, we shall determine the atom economy. This can be obtained as follow:
Mass of desire atom (C₆H₁₂O₆) = 180 g
Total mass of reactants = 372 g
Atom economy =.?
Atom economy = mass of desire atom / total mass of reactant × 100
Atom economy = 180/372 × 100
Atom economy = 48.39%