Reptiles, amphibians, and fish are all cold-
blooded animals. Their body temperatures are
determined by their surroundings. How does a
cold blooded animal's ability to digest food
change in colder temperatures?
It digests food at the same rate regardless of
the temperature.
It digests food more quickly at lower
temperatures.
It digests food more slowly at lower
temperatures.

Answers

Answer 1

Answer:

it digests food more slowly at lower temperatures

Answer 2

It digests food more slowly at lower temperatures.  

• Based on the given question, it can be stated that the cold blooded animal's surroundings determine the temperature of their body and as an outcome, they possess the tendency to eat food differently.  

• It can be said that the cold blooded animals like amphibians, reptiles, and fishes all digest food more gradually at the time of cold in comparison to warmer climates.  

Thus, a cold blooded animal's tendency to digest food varies in colder temperatures as they digests food more slowly at lower temperatures.

To know more about:

https://brainly.com/question/11904373


Related Questions

c. Write a complete ionic equation for the reaction and identify the spectator ions.

Answers

Answer is 6 Na + (aq) +3 CA swaured + 6 CI- (aq)

The required  complete ionic equation of the reaction

Pb(NO3)2+2KI---->PbI2+2KNO3   is   Pb2+(aq) + 2 I−(aq) → PbI2(s)

What is ionic equation?

A chemical equation in which the electrolytes in aqueous solution are expressed as dissociated ions.

Spectator ions in above equation are as follows- K +and NO3−

Define spectator ions.

Ions that are not involved in the actual chemical reaction are called spectator ions.

Net ionic equation of given reaction isPb⁺²+2I ⁻¹⟶PbI₂It shows only the ions which involves in the chemical reaction.

Therefore, K⁺ and NO3⁻ are spectator ions.

Learn more about spectator ions ,here:

https://brainly.com/question/22277121

#SPJ2  

Two oxide of sulphur,A and B were analyzed and the results obtained showed that in oxide A,3.50g of sulphur combined with 6.00g of oxygen and in oxide B,2.80g of sulphur combined with 9.55g.Show that this result illustrate the law of multiple proportion

Answers

Answer:

See Explanaton

Explanation:

The law of multiple proportions states that when two same elements form more than a compound, the different masses of one element that combine with the same mass of the other element are in the ratio of small whole numbers.

Oxide A

3.50g of sulphur combined with 6.00g of oxygen

Oxygen:Sulphur = 6 : 3.5

Oxide B

2.80g of sulphur combined with 9.55g

Oxygen : Sulphur = 9.55 : 2.8

Therefore:

The ratio of Oxygen to Sulphur in Oxides A and B is:

[tex]\dfrac{\text{Oxygen}}{\text{Sulphur}} \implies \dfrac{6}{3.5}:\dfrac{9.55}{2.8} = \dfrac{1.7}{1}:\dfrac{3.4}{1}=1:2[/tex]

Ratio of Oxygen=1:2

There is exactly twice in Oxide B as in Oxide A.

This result illustrates the law of multiple proportions.

Which statement correctly describes a feature of the rock cycle?
PA
Rocks are preserved through the process.
Rocks change from one type to another.
Different rock groups are not related to one another.
Rocks change from one type to another in a specific order.

Answers

Answer:

It’s D

Explanation:

Answer:

D Rocks change from one type to another in a specific order.

Explanation:

How many moles of silver are equivalent to 2.408 x 10^24 atoms

Answers

i found this i hope this helps you

The mole is used to measure small particles like atoms and molecules.  The 4 moles of silver is equivalent to [tex]\bold{2.408 x 10^2^4 }[/tex] atoms.

Given here,

The number of atoms

[tex]\bold{2.408 x 10^2^4 }[/tex]

Number of moles = ?

1 mol of substance = [tex]\bold{ 6.02 x10^2^3}[/tex]

Hence,

moles of silver,

[tex]\bold {= \dfrac {2.408 x 10^2^4 } { 6.02 x10^2^3} }}\\\\\bold {= 4 mol}[/tex]

Therefore, the 4 moles of silver is equivalent to [tex]\bold{2.408 x 10^2^4 }[/tex] atoms.

To know more about mole concept, refer to the link:

https://brainly.com/question/20483253

Which of the following is the best definition of a physical change?

A. Something that can be observed or measured while changing the identity of the substance.

B. A nail rusting.

C. A change that occurs without changing the identity of the substance.

D. Ice melting into water.

Answers

Answer:

the answer is D.ice melting into water

What biological sample do home pregnancy tests use to detect pregnancy?

Answers

Answer:

The biological sample that pregnancy tests use to detect pregnancy is urine

Answer:

yes

Explanation:

the urine in the the tester will find hormones to determine if pregnant or not

Phloem contains specialized cells that move sugars and other nutrients both
up and down in plants. Which object is the best model of one of these cells?
A. Water balloon

Answers

Answer:Drinking straw

Explanation: my quiz said so

The object that represents the best model of one of the phloem cells is the drinking straw.

What is Phloem?

Phloem may be defined as a type of vascular tissue in plants that significantly conducts the passage of sugars and other metabolic products from the leaves to the roots. This mediates the migration of sugar which is synthesized in the leaves during photosynthesis.

Apart from this, the phloem also regulates the movement of nutrients from the roots to the upper part of the body. This function of phloem cells shares homology with the object known as a drinking straw that mediates the transport of any fluid in both directions.

Therefore, a drinking straw is an object that represents the best model of one of the phloem cells.

To learn more about Phloem cells, refer to the link:

https://brainly.com/question/3138900

#SPJ2

Your question seems incomplete. The most probable complete question is as follows:

Can openerWater balloonDrinking StrawKitchen strainer

With carbon dioxide, what phase change takes place when pressure
increases from 1 atm to 10 atm at -40°C?
Carbon Dloxide Phase Diagram
Melting
point
Boling
point
20-
15-
Liquid
Pressure (atm)
10-
Solid
5-
Gas
0
0
00
-100
Temperature (°C)
A. A solid changes to a liquid.
B. A liquid changes to a solid.
O C. A liquid changes to a gas.
D. A gas changes to a liquid.

Answers

Answer:B. A liquid changes to a solid.

Explanation:

A Liquid changes to solid when pressure

increases from 1 atm to 10 atm at -40°C

What is the concept for this?The increase in pressure on liquid it forms a solidIf the pressure above the liquid is decreased sufficently, the liquid form a gas

How to solve this problem?Here the Freezing point is -78.33°C i.e [-109°F]above this temperature CO2 remains in liquid state

So, given at -40°C

CO2 will be in liquid state and as per the concept explained above by increasing the pressure on liquid we get the solid state

Thus , With CO2 a liquid phase change to a solid

phase when pressure increases 1 atm to 10atm at -40°C

Learn more about phase diagram here

https://brainly.com/question/1612862

#SPJ2

Tick the correct choice and give reason why you have selected the particular choice. [20] 1. A cup of hot tea is left in the same room as a bowl of ice-cream. What is likely to happen to both after some time, if both are placed on the dining table? A. The tea becomes as cold as ice cream B. The ice cream becomes warmer than the tea C. The tea cools to room temperature, the ice cream melts and warms to room temperature D. The tea becomes colder than before but not as cool as the air in the room

Answers

Answer:

C. The tea cools to room temperature, the ice cream melts and warms to room temperature.

Explanation:

The tea's temperature was higher than room temperature. The ice cream's temperature was lower than room temperature. After some time, both items will become room temperature, which results in cooling and melting.

what is the molar mass of magnesium tartrate

Answers

Answer:

172.385 g/mol

Explanation:

Magnesium Tartrate is C4H4MgO6

C - 12.01 g/mol

H - 1.01 g/mol

Mg - 24.305 g/mol

O - 16.00 g/mol

12.01(4) + 1.01(4) + 24.305 + 16(6) = 172.385 g/mol

Answer:

172.38

Explanation:

[tex]C_4H_4MgO_6\\C=12.01\\H=1.01\\Mg=24.30\\O=16.00\\\\4(12.01)+4(1.01)+24.30+6(16.00)\\48.04+4.04+24.30+96\\=172.38[/tex]

C = 12.01

H=1.01

Mg=24.30

O =16.00

4(12.01)+4(1.01)+24.30+6(16.00)

48.04 +4.04+24.30+96

=172.38

En la electrólisis del Cloruro de plomo se han depositado 2.6 gramos del metal en 20 minutos el peso atómico del plomo es 206 calculo la intensidad de la corriente eléctrica empleada AYUDENNNNN PLISSSS es para hoy!!!!!

Answers

Answer:

2.01 A

Explanation:

Para esta pregunta debemos empezar por la semi-reaccion del plomo:

[tex]Pb^+^2~_(_a_q_)~+~2e^-~->~Pb_(_s_)[/tex]

Se intercambian dos electrones en la semi-reacción del plomo. Si tenemos en cuenta la ecuación:

[tex]n=\frac{I*t}{z*F}[/tex]

Donde:

n= Moles depositados

I= Intensidad de corriente (en Amperios)

z= Numero de electrones intercambiados

F= Constante de faraday = 96484 C/mol

t=tiempo (en segundos)

Que conocemos de esta ecuación?

Los moles (se pueden calcular a partir de la masa atómica del plomo, 207.2 g/mol)

[tex]2.6~g~Pb\frac{1~mol~Pb}{207.2~g~Pb}=0.0125~mol~Pb[/tex]

El tiempo (hay que convertirlo a segundos):

[tex]20~min\frac{60~s}{1~min}=1200~s[/tex]

Z (Numero de electrones)

De acuerdo a la semi-reacción son intercambiados 2 electrones.

Por lo tanto podemos resolver para "I":

[tex]I=\frac{n*z*F}{t}=\frac{0.0125~mol*2*96484\frac{C}{mol}}{1200~s}[/tex]

[tex]I~=~2.01~\frac{C}{s}=2.01~A[/tex]

Espero que sea de ayuda!

A student weighs out a 6.64 g sample of , transfers it to a 500. mL volumetric flask, adds enough water to dissolve it and then adds water to the 500. mL tick mark. What is the molarity of cobalt(II) fluoride in the resulting solution

Answers

Answer:

the molarity of cobalt(II) fluoride in the resulting solution is = 0.137  M

Explanation:

Given that :

a student dissolves 6.64 g of CoF₂  into 500 mL of water

volume of the solution(water) = 500 mL = 0.50 L

The standard  molar mass of CoF₂ is 96.93 g/mol

number of moles of CoF₂ = mass of CoF₂/molar mass of CoF₂

number of moles of CoF₂ = 6.64 g/96.93 g/mol

number of moles of CoF₂ = 0.0685 mol

The molarity of any given substance is known to be as the number of moles of solute dissolved in one litre of solution.

Thus ;

Molarity of  cobalt(II) fluoride CoF₂ in the resulting solution is = number of moles / Volume in (L)

Molarity of  cobalt(II) fluoride CoF₂  = 0.0685 mol/ 0.50 L

= 0.137  M

Thus ; the molarity of cobalt(II) fluoride in the resulting solution is = 0.137  M

Balance the chemical equations

Answers

Answer:

Explanation:

1).  Ca(NO₃)₂ + KI → CaI + K(NO₃)₂

    This equation is incorrect.

    When Ca⁺⁺ reacts with I⁻, final product is CaI₂

    And when K⁺ react with NO₃⁻, final product is KNO₃

    Hence the equation will be,

    Ca(NO₃)₂ + KI → CaI₂ + KNO₃

    Now we have to balance this equation.

     Ca(NO₃)₂ + 2KI → CaI₂ + KNO₃

                          ↓

     Ca(NO₃)₂ + 2KI → CaI₂ + 2KNO₃

2). Ca(NO₃)₂ + KOH → CaOH + K(NO₃)₂

    This equation is incorrect,

    Since the reaction of Ca⁺⁺ with OH⁻ gives the final product     Ca(OH)₂

    And final product of K⁺ and NO₃⁻ is KNO₃

    Therefore, the equation will be,

    Ca(NO₃)₂ + KOH → Ca(OH)₂ + KNO₃

    Now we will balance this equation by changing the coefficients of the      molecules until the number of atoms on both the sides become equal.

    Ca(NO₃)₂ + KOH → Ca(OH)₂ + 2KNO₃

                                ↓

     Ca(NO₃)₂ + 2KOH → Ca(OH)₂ + 2KNO₃

3). Ca(NO₃)₂ + Na₂C₂O₄ → CaC₂O₄ + 2Na(NO₃)₂

    This equation is incorrect,

    Since the reaction of Na⁺ and NO₃⁻ gives the final product    NaNO₃.

    Therefore, the correct equation will be,

    Ca(NO₃)₂ + Na₂C₂O₄ → CaC₂O₄ + 2NaNO₃

     This equation is in the balanced form.

Calculate the payback time if she insulates the loft with 300 mm insulation when: area of loft space = 100m^2 cost of roll of 100 mm thick loft insulation that covers 8.3m^2 = £20 cost of putting the insulation into the loft = £120 savings per year = £80 per 100 mm Payback Time = installation cost divided by annual savings

Answers

Answer: Payback time = 0.0075

Explanation: Since payback time is calculated as:

payback time = [tex]\frac{installation cost}{annual savings}[/tex]

First determine the installation cost:

100 mm thick insulation covers 8.3 m². Then 300 mm covers 24.9 m².

To cover 8.3m² costs £20. Then, the cost to cover 24.9 m² is:

cost = [tex]\frac{20*24.9}{8.3}[/tex]

cost = £60

The cost of putting the insulation is £120, so the total cost is:

total cost = £60 + £120

total cost = £180

Savings per year per 100 mm thick is £80. For 300 mm, the value of annual savings is:

savings = [tex]\frac{300*80}{100}[/tex]

savings = 240

payback time = [tex]\frac{installation cost}{annual savings}[/tex]

payback time = [tex]\frac{180}{240}[/tex]

payback time = 0.75

mention gay-lussac's law of combining volumes​

Answers

Answer:

When volume is kept constant (kept the same), Gay-Lussac's law states that the pressure of gas varies directly with the temperature of the gas. The equation would be [tex]\frac{P1}{T1}=\frac{P2}{T2}[/tex], Where P is the pressure (in atm) and T is the temperature (in K°).

Explanation:

Answer:

When volume is kept constant (kept the same), Gay-Lussac's law states that the pressure of gas varies directly with the temperature of the gas. The equation would be , Where P is the pressure (in atm) and T is the temperature (in K°).

Explanation:

a heating fan is supplied with 150 j of electricity which is nonverts to 113 j of thermal energy and 37 j of sound energy
How efficient is the heating fan?

Answers

Answer:

Heating Fan is 75.33% efficient.

Explanation:

As it is mentioned that the given fan is a HEATING FAN, it means the it is used for provided heat (thermal energy) to the surrounding. Hence, its efficiency depends upon how much heat/thermal energy is provides.

We can state that.

Total Energy provided = 150 J

Useful Energy = 113 J

Wasted Energy = 37 J

The efficiency of the heating fan can be given by following formula:

Efficiency = ( Useful Energy / Total Energy ) × 100

Efficiency = ( 113 J / 150 J) × 100

Efficiency = (0.7533)× 100

Efficiency = 75.33%

Identify the correct statement regarding the strength of chemical bonds.
Weak bonds require more surface area to form than strong bonds.
A weak bond forms from a smaller change in energy compared to a strong bond.
Strong bonds occur with high temperature and weak bonds with low temperature.
Weak bonds require more heat to form than strong bonds.

Answers

Answer:

B.

Explanation:

A weak bond forms from a smaller change in energy compared to a strong bond.

A 75 lb (34 kg) boy falls out of a tree from a height of 10 ft (3 m). i. What is the kinetic energy of the boy when he hits the ground? Round your answer to the nearest joule. ii. What is the speed of the boy when he hits the ground? Round your answer to two significant figures. iii. Using the conversion factors of 1 m = 1.094 yd and 1 mi = 1760 yd, calculate the speed of the boy in miles per hour when he hits the ground.

Answers

Answer:

Kinetic energy of boy just before hitting the ground is [tex]\approx[/tex]1000 J.

Speed of boy just before hitting the ground is 7.67 m/s

or 17.16 mi/hr.

Explanation:

Given that:

Mass of boy = 75lb = 34 kg

Height, h = 10ft = 3m

To find:

Kinetic energy of boy when he hits the ground.

As per law of conservation of energy The potential energy gets converted to kinetic energy.

[tex]\therefore[/tex] Kinetic energy at the time boy hits the ground = Initial potential energy of the boy when he was at the Height 'h'

The formula for potential energy is given as:

[tex]PE = mgh[/tex]

Where m is the mass

g is the acceleration due to gravity, g = 9.8 [tex]m/s^2[/tex]

h is the height of object

Putting all the values:

PE = [tex]34 \times 9.8 \times 3 \approx 1000\ J[/tex]

Hence, Kinetic energy is [tex]\approx[/tex]1000 J.

Formula for Kinetic energy is:

[tex]KE = \dfrac{1}{2}mv^2[/tex]

where m is the mass and

v is the speed

Putting the values and finding v:

[tex]1000 = \dfrac{1}{2}\times 34 \times v^2\\\Rightarrow v^2 = 58.82\\\Rightarrow v = 7.67\ m/s[/tex]

Given that:

1 m = 1.094 yd and 1 mi = 1760 yd

[tex]\Rightarrow 1609\ m = 1\ mi[/tex]

Converting 7.67 m/s to miles/hour:

[tex]\dfrac{7.67 \times 3600}{1609}=17.16\ mi/h[/tex]

how many atoms are contained in 2.70g of aluminum provided that 32g of sulphur equals 6.02 × 10^(23)atoms​

Answers

Answer:

[tex]1.63 \times {10}^{24} [/tex]

one atom of an element = 6.02 \times {10}^{23} atom

The mass of one atom of sulphur = 32g

The mass of one atom of aluminium = 27g

so one atom of aluminium = 6.02 \times {10}^{23}

27g of AL = 6.02 \times {10}^{23} atom

2.70g of AL = X atoms

Then you cross multiply ........

and get the answer

.

sea water boiling below 100 degrees celsius true or false

Answers

Answer:

Explanation:

its true

hope this helps

plz mark as brainliest!!!!!

Answer:

True

Explanation:

Which question would most likely be studied by a physicist?
A. Were there ever any living organisms on Mars?
B. How can the forces on a space probe be controlled so it will land
on Mars?
O C. What type of substances make up the soil on Mars?
O D. Should the government spend taxpayers' money to send space
probes to Mars?

Answers

Answer:A

Explanation: Were there any living organisms is the answer because physics is the study of matter,its motion and behaviour of space and time and some other topics like energy and force.

Answer:

B

Explanation:

Forces and vectors on a probe are a physics thing

What is equilibrium?? Give examples

Answers

Answer:

it is when a state in which opposing forces or influences are balanced.

A example of equilibrium is in economics  supply and demand are equal.

Explanation:

Answer:

Compromise of 1850

Explanation:

how many moles of O2 react with .75 moles of c10h22

Answers

Answer:

2 moles

Explanation:

Which part of the electromagnetic spectrum is nearest to X-rays? microwaves infrared light gamma rays radio waves

Answers

Answer:

The correct answer to the following question will be Option A (Microwaves).

Explanation:

This tends to be a source of radiation, including some signals, infrared radiation, x-rays as well as gamma.  This appears to have a diverse variety of uses, involving communications, radar, and scheduling, but best known by most individual people. Sections of society used handheld devices, including tablets, as well as WiFi.

The other given choices are not related to the given circumstances. So that option A seems to be the appropriate one.

Answer:

its a

Explanation:

For each of the compounds, find the length of the longest carbon chain in the box provided.
CH,
CH3 -CH2-CH2-CH2-CH-CH2-CH2 - CH2 - CH3
CH,CH,CH,
HC
CH-CH2-CH3
CH,CH.CHCCH,CH,CH,
1
CH2
H.C CH.CH
CH3
<​

Answers

Answer:

In First compound the longest chain contains 7 C atoms.

In the Second compound the longest chain contains 9 C atoms.

In the Third compound the longest chin contains 7C atoms.

Explanation:

In first compound the longest chain contains 7 carbon atoms.In the second compound the longest chain contains 9 carbon atoms.In the third compound the longest chin contains 7 carbon atoms.

What is an atom?

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

what is Lfusion in the equation Q=mLfusion

Answers

Answer:

[tex]L_{\text{fusion}[/tex] is latent heat of fusion.

Explanation:

Latent heat is basically termed as hidden heat. It is defined as the amount of heat required to change 1 g of a substance at the temperature of its melting point from the solid to the liquid state at constant temperature.The formula that relates heat and latent heat of fusion is given by :

[tex]Q=mL_{\text{fusion}}[/tex]

Here,

m is mass of substance

[tex]L_{\text{fusion}[/tex] is latent heat of fusion.

After 273 m3 of ethylene oxide at 748 kPa and 525 K is cooled to 293 K, it is allowed to expand to 1100. m3. The new pressure is _____kPa

Answers

Answer:

[tex]\large \boxed{\text{104 kPa}}[/tex]

Explanation:

To solve this problem, we can use the Combined Gas Laws:

[tex]\dfrac{p_{1}V_{1} }{n_{1}T_{1}} = \dfrac{p_{2}V_{2} }{n_{2}T_{2}}[/tex]

Data:

p₁ = 748 kPa;  V₁ =   273 m³;  n₁ = n₁;  T₁ =  525 K

p₂ = ?;             V₂ = 1100. m³; n₂ =  n₁; T₂ =  293 K

Calculations:

[tex]\begin{array}{rcl}\dfrac{p_{1}V_{1}}{n_{1} T_{1}} & = & \dfrac{p_{2}V_{2}}{n_{2} T_{2}}\\\\\dfrac{\text{748 kPa}\times \text{273 m}^{3}}{n _{1}\times \text{525 K}} & = &\dfrac{p_{2}\times \text{1100. m}^{3}}{n _{1}\times \text{293 K}}\\\\\text{390.0 kPa} & = &3.754{p_{2}}\\p_{2} & = & \dfrac{\text{390.0 kPa}}{3.754}\\\\ & = & \textbf{104 kPa} \\\end{array}\\\text{The new pressure is $\large \boxed{\textbf{104 kPa}}$}[/tex]

which of the following us not a property of salt in the ionic and covalent properties lab

Answers

Explanation:

I think Low melting point

because NaCl (salt has mp 801 degC)

Water has mp 0 degC

Which is one way that a short-term environmental change will most likely affect organisms within an ecosystem? A)It will lead to larger populations. B)It will lead to speciation. C)It will lead to adaptation. D)It will lead to forced migration.

Answers

Answer:

D)It will lead to forced migration.

Explanation:

Forced migration is an involuntary, sudden movement of organisms from one geographical location to another. This is often in response to short term environmental changes such as drought, famine, etc

When an ecosystem suddenly comes under stress due to these short term environmental changes, organisms may not be left with any other choice but to move or go to new locations in the quest for survival. The organisms may not have left the ecosystem in the absence of such short term ecological stress. This is what is meant by forced migration.

Answer:

D forced migration

Explanation:

Which is one way that analyzing ice benefits scientists who study ancient climates? Scientists can analyze frozen volcanic dust to help predict eruptions. Scientists can drill deep into the ice to collect ice cores. Scientists can use pollen grains in ice to make inferences about the climate area. Scientists can study tree rings in ice to learn more about past climates.

Answers

Answer:

The correct option is;

Scientists can drill deep into the ice to collect ice cores which contain trapped atmospheric gases

Explanation:

The study of past climates also known as paleoclimatology, is accomplished by acquiring information from proxy data sources which are physical environment characteristics that are preserved through time to remake the conditions of past climate

Past physical environmental characteristics, from which information about ancient climate can be gained are stored in nature's climate variability records including, ice cores, rings in tree stems, fossil pollen, sediments found in the waters of the ocean

The proxy sources provide a means of understanding the conditions of ancient climate before advent of climate measurement.

Therefore, one way that analyzing ice benefits scientists who study ancient climates is that scientists can drill deep into the ice to collect ice cores which contain trapped atmospheric gases from past climates.

Answer: B: Scientists can study the layers of ice cores to gather information about past atmospheric composition.

Explanation: Got it right on a test!

Other Questions
Adams Manufacturing allocates overhead to production on the basis of direct labor costs. At the beginning of the year, Adams estimated total overhead of $396,000; materials of $410,000 and direct labor of $220,000. During the year Adams incurred $418,000 in materials costs, $413,200 in overhead costs and $224,000 in direct labor costs. Compute the predetermined overhead rate. A boy is twirling a model airplane on a string 4 feet long. if he twirls the plane at 0.25 revolutions per minute, how far does the plane travel in 4 minutes? round to the nearest tenth. Select the correct answer.Which detail is present in the passage and in the illustration?OATom convincing Ben to let him have his appleB.Ben begging Tom to let him paint the fenceC. Ben bragging to Tom about going swimmingD. Tom using a paintbrush to whitewash the fence How many sharps/flats are in the following i. G major ii. D major iii. B flat major iv. F major he price of a pair of headphones is $39.99 before tax. Dalton bought the headphones for 30% off. He then paid 6% sales tax on the discounted price. Part A: How much did Dalton pay in sales tax? Show all work and steps in your solution. (5 points) Part B: What is the total amount that Dalton paid for the headphones? Show all work and steps in your solution Jose buys candy that costs $8 per pound. He will spend at least $48 on candy. What are the possible numbers of pounds he will buy? Use p for the number of pounds Jose will buy. Write your answer as an inequality solved for p. At the beginning of the year, Ann and Becky own equally all of the stock of Whitman, Inc., an S corporation. Whitman generates a $120,000 loss for the year. On the 189th day of the year, Ann sells her half of the Whitman stock to her son, Scott. Becky's stock basis is $41,300. How much of the Whitman loss belongs to Ann and Becky Drag each label to the correct location. Match the climate zones to their relative temperature levels. (coldest zonehottest zonemoderate temperature zone) You are the manager of a project that has an operating leverage rating of 2.8 and a required return of 14 percent. Due to the current state of the economy, he expects sales to decrease by 7 percent next year. What change should you expect in operating cash flows next year given your sales forecast? describe briefly one problem caused by the expansion of metals. Place the following statements into the correct categories.Canal constructed to Red SeaThe Old KingdomProsperity and trade increasedGreat Pyramids were constructedKingdom fell to Hyksos invaders The technology environment would include studies of family changes. social engineering. information technology. minimum wage laws. customer service. There are orange, yellow and blue sweets in a box. The ratio of thenumber of orange, yellow and blue sweets in the box is 7:5:4. Whatpercentage of the sweets are blue? *4%25%35%O 16% Write In (4/9) in terms of In 2 and In 3.A)21n 2 - 21n 3B)4In 2 - 4In 3C) 3(In 2 - In 3)D)In2 2 - 4In 3 geometry! please help How many different 7-digit PIN codes using only the digits 0-9 are possible? P = {4,5,8, 11, 13) andQ = {11, 12, 13, 15, 17, 19).a An element is selected at random from P.What is the probability that it is odd? An object in a certain direction with an acceleration in the perpendicular direction How many 4-digit numbers divisible by 5, all of the digits of which are even, are there? WILL MARK BRAINLIEST NEEED ASAP Milton Industries expects free cash flow of $5 million each year. Milton's corporate tax rate is 35%, and its unlevered cost of capital is 15%. The firm also has outstanding debt of $19.05 million, and it expects to maintain this level of debt permanently. What is the value of Milton Industries without leverage? What is the value of Milton Industries with leverage?