a. The gravitational field strength at the surface of Mars is 3.71 m/s^2.
b. The gravitational force that Deimos would exert on a 2.50 kg object at its surface is 1.17 × 10^10 N.
c. The magnitude of the gravitational force that Mars exerts on Deimos is 1.17 × 10^10 N.
d. The magnitude of the gravitational force that Deimos exerts on Mars is equal to the gravitational force that Mars exerts on Deimos, as determined in part c.
e. The tangential speed of Deimos is 9.90 m/s.
f. The orbital period of Phobos is 7.62 days.
a. To calculate the gravitational field strength at the surface of Mars, we can use the formula:
g = G * (Mars mass) / (Mars radius)^2
Plugging in the values, where G is the gravitational constant (6.67 × 10^-11 N m^2/kg^2), we get:
g = (6.67 × 10^-11 N m^2/kg^2) * (6.40 × 10^23 kg) / (3.40 × 10^6 m)^2
g= 3.71 m/s^2.
b. To calculate the gravitational force that Deimos would exert on a 2.50 kg object at its surface, we can use the formula:
F = G * (mass of Deimos) * (mass of object) / (distance between Deimos and the object)^2
Plugging in the values, where G is the gravitational constant, we get:
F = (6.67 × 10^-11 N m^2/kg^2) * (1.48 × 10^15 kg) * (2.50 kg) / (6.29 × 10^3 m)^2
F=1.17 × 10^10 N.
c. To calculate the magnitude of the gravitational force that Mars exerts on Deimos, we can use the same formula as in part b, but with the masses and distances reversed:
F = G * (mass of Mars) * (mass of Deimos) / (distance between Mars and Deimos)^2
Plugging in the values, we get:
F = (6.67 × 10^-11 N m^2/kg^2) * (6.40 × 10^23 kg) * (1.48 × 10^15 kg) / (2.35 × 10^7 m)^2
F= 1.17 × 10^10 N.
d. The magnitude of the gravitational force that Deimos exerts on Mars is the same as the force calculated in part c.
e. To calculate the tangential speed of Deimos, we can use the formula:
v = √(G * (mass of Mars) / (distance between Mars and Deimos))
Plugging in the values, we get:
v = √((6.67 × 10^-11 N m^2/kg^2) * (6.40 × 10^23 kg) / (2.35 × 10^7 m))
v= 9.90 m/s.
f. The orbital period of a moon is proportional to the square root of its orbital radius. This means that if the orbital radius of Phobos is 9376 km, which is 31.1 times greater than the orbital radius of Deimos, then the orbital period of Phobos will be √31.1 = 5.57 times greater than the orbital period of Deimos.
The orbital period of Deimos is 30.3 hours, so the orbital period of Phobos is 30.3 * 5.57 = 169.5 hours, or 7.62 days.
To learn more about orbital period: https://brainly.com/question/14494804
#SPJ11
An important news announcement is transmitted by radio waves to people who are 300 km away and sitting next to their radios, and also by sound waves to people sitting 4.00 m from the newscaster in a newsroom. Who receives the news first? people in the newsroom both at the same time At = people next to their radios What is the difference in time At between each group of people receiving the news?
Who receives the news first and calculate the time difference between the two groups of people, we need to compare the speed of radio waves and sound waves.people sitting next to their radios will receive the news first, with a time difference (At) of approximately 1 millisecond. The people in the newsroom will receive the news approximately 11.7 milliseconds later.
The speed of light, which includes radio waves, is approximately 3.00 x 10^8 meters per second (m/s) in a vacuum. However, when radio waves travel through the Earth's atmosphere, they slow down slightly but the difference is negligible for this calculation.
On the other hand, the speed of sound depends on the medium through which it travels. In dry air at room temperature, the speed of sound is approximately 343 meters per second (m/s).
First, let's calculate the time it takes for the radio waves to travel a distance of 300 km:
Time taken by radio waves = Distance / Speed
= 300,000 m / (3.00 x 10^8 m/s)
≈ 1.00 x 10^(-3) seconds (or 1 millisecond)
Next, let's calculate the time it takes for sound waves to travel a distance of 4.00 meters:
Time taken by sound waves = Distance / Speed
= 4.00 m / 343 m/s
≈ 0.0117 seconds (or 11.7 milliseconds)
Therefore, people sitting next to their radios will receive the news first, with a time difference (At) of approximately 1 millisecond. The people in the newsroom will receive the news approximately 11.7 milliseconds later.
Learn more about radio waves at
https://brainly.com/question/13989450
#SPJ11
A woman is standing on a bathroom scale in an elevator that is not moving. The balance reads 500 N. The elevator then moves downward at a constant speed of 5 m/s. What is the reading on the scale while the elevator is descending at constant speed?
d. 500N
e. 750N
b. 250N
c. 450N
a. 100N
Two point-shaped masses m and M are separated by a distance d. If the separation d remains fixed and the masses are increased to the values 3m and 3M respectively, how will the gravitational force between them change?
d. The force will be nine times greater.
b. The force will be reduced to one ninth.
e. It is impossible to determine without knowing the numerical values of m, M, and d.
c. The force will be three times greater.
a. The force will be reduced to one third.
The reading on the scale while the elevator is descending at a constant speed is 500N (d). The gravitational force between the masses will be nine times greater when the masses are increased to 3m and 3M (d).
When the elevator is not moving, the reading on the scale is 500N, which represents the normal force exerted by the floor of the elevator on the woman. This normal force is equal in magnitude and opposite in direction to the gravitational force acting on the woman due to her weight.
When the elevator moves downward at a constant speed of 5 m/s, it means that the elevator and everything inside it, including the woman, are experiencing the same downward acceleration. In this case, the woman and the scale are still at rest relative to each other because the downward acceleration cancels out the gravitational force.
As a result, the reading on the scale remains the same at 500N. This is because the normal force provided by the scale continues to balance the woman's weight, preventing any change in the scale reading.
Therefore, the reading on the scale while the elevator is descending at a constant speed remains 500N, which corresponds to option d. 500N.
Regarding the gravitational force between the point-shaped masses, according to Newton's law of universal gravitation, the force between two masses is given by:
F = G × (m1 × m2) / r²,
where
F is the gravitational forceG is the gravitational constantm1 and m2 are the massesr is the separation distance between the massesIn this case, the separation distance d remains fixed, but the masses are increased to 3m and 3M. Plugging these values into the equation, we get:
New force (F') = G × (3m × 3M) / d² = 9 × (G × m × M) / d² = 9F,
where F is the original force between the masses.Therefore, the gravitational force between the masses will be nine times greater when the masses are increased to 3m and 3M, which corresponds to option d. The force will be nine times greater.
To learn more about gravitational force, Visit:
https://brainly.com/question/27943482
#SPJ11
Example 8 A planet orbits a star in a year of length 4.37 x 10's, in a nearly circular orbit of radius 2.94 x 1011 m. With respect to the star, determine (a) the angular speed of the planet, (b) the tangential speed of the planet, and (c) the magnitude of the planet's centripetal acceleration. (a) Number Units m m (b) Number Units m/s (c) Number Units m/ s2
(a) The angular speed of the planet is approximately 0.144 rad/s.
(b) The tangential speed of the planet is approximately 1.27 x 10⁴ m/s.
(c) The magnitude of the planet's centripetal acceleration is approximately 5.50 x 10⁻³ m/s².
(a) The angular speed of an object moving in a circular path is given by the equation ω = 2π/T, where ω represents the angular speed and T is the time period. In this case, the time period is given as 4.37 x 10⁶ s, so substituting the values, we have ω = 2π/(4.37 x 10⁶) ≈ 0.144 rad/s.
(b) The tangential speed of the planet can be calculated using the formula v = ωr, where v represents the tangential speed and r is the radius of the orbit. Substituting the given values, we get v = (0.144 rad/s) × (2.94 x 10¹¹ m) ≈ 1.27 x 10⁴ m/s.
(c) The centripetal acceleration of an object moving in a circular path is given by the equation a = ω²r. Substituting the values, we get a = (0.144 rad/s)² × (2.94 x 10¹¹ m) ≈ 5.50 x 10⁻³ m/s².
learn more about angular speed here:
https://brainly.com/question/30402548
#SPJ11
Choose the correct statement regarding optical instruments such as eyeglasses. A near-sighted person has trouble focusing on distant objects and wears glasses that are thinner on the edges and thicker in the middle. A person with prescription of -3.1 diopters is far-sighted. A near-sighted person has a near-point point distance that is farther than usual. A person with prescription of -3.1 diopters is near-sighted. A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
The correct statement regarding optical instruments such as eyeglasses is that a near-sighted person has trouble focusing on distant objects and wears glasses with diverging lenses. The correct option is - A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
Nearsightedness is a condition in which the patient is unable to see distant objects clearly but can see nearby objects. In individuals with nearsightedness, light rays entering the eye are focused incorrectly.
The eyeball in nearsighted individuals is somewhat longer than normal or has a cornea that is too steep. As a result, light rays converge in front of the retina rather than on it, causing distant objects to appear blurred.
Eyeglasses are an optical instrument that helps people who have vision problems see more clearly. Eyeglasses have lenses that compensate for refractive errors, which are responsible for a variety of visual problems.
Eyeglasses are essential tools for people with refractive problems like astigmatism, myopia, hyperopia, or presbyopia.
A near-sighted person requires eyeglasses with diverging lenses. Diverging lenses have a negative power and are concave.
As a result, they spread out light rays that enter the eye and allow the image to be focused properly on the retina.
So, the correct statement is - A near-sighted person has trouble focusing on distant objects and wears glasses with converging lenses.
Learn more about eyeglasses here:
https://brainly.com/question/31868298
#SPJ11
At the starting gun, a runner accelerates at 1.9 m>s2 for 5.2 s. The runner’s acceleration is zero for the rest of the race. What is the speed of the runner (a) at t = 2.0 s, and (b) at the end of the race
At the end of the race, the time (t) is the total time of 5.2 seconds. To solve this problem, we can use the equations of motion. The equations of motion for uniformly accelerated linear motion are:
v = u + at
s = ut + (1/2)at^2
v^2 = u^2 + 2as
v = final velocity
u = initial velocity
a = acceleration
t = time
s = displacement
Initial velocity (u) = 0 m/s (since the runner starts from rest)
Acceleration (a) = 1.9 m/s^2
Time (t) = 5.2 s
(a) To find the speed at t = 2.0 s:
v = u + at
v = 0 + (1.9)(2.0)
v = 0 + 3.8
v = 3.8 m/s
Therefore, the speed of the runner at t = 2.0 s is 3.8 m/s.
(b) To find the speed at the end of the race:
The runner's acceleration is zero for the rest of the race. This means that the runner continues to move with a constant velocity after 5.2 seconds.
Since the acceleration is zero, we can use the equation:
v = u + at
At the end of the race, the time (t) is the total time of 5.2 seconds.
Learn more about accelerated here : brainly.com/question/32899180
#SPJ11
2. A projectile is launched vertically from the surface of the earth at a speed of VagR, where R is the radius of the earth, g is the gravitational acceleration at the earth's surface and a is a constant which can be large. (a) Ignore atmospheric resistance and integrate Newton's second law of motion once in order to find the maximum height reached by the projectile in terms of R and a. (9) (b) Discuss the special case a = 2. (1)
The maximum height reached by a projectile launched vertically from the surface of the earth at a speed of VagR is R. In the special case a = 2, the projectile will escape the gravitational field of the earth and never return.
(a)The projectile's motion can be modeled by the following equation of motion:
m*dv/dt = -mg
where, m is the mass of the projectile, v is its velocity, and g is the gravitational acceleration.
We can integrate this equation once to get:
m*v = -mgh + C
where C is a constant of integration.
At the highest point of the projectile's trajectory, its velocity is zero. So we can set v = 0 in the equation above to get:
0 = -mgh + C
This gives us the value of the constant of integration:
C = mgh
The maximum height reached by the projectile is the height it reaches when its velocity is zero. So we can set v = 0 in the equation above to get:
mgh = -mgh + mgh
This gives us the maximum height:
h = R
(b) In the special case a = 2, the projectile's initial velocity is equal to the escape velocity. This means that the projectile will escape the gravitational field of the earth and never return.
The escape velocity is given by:
∨e = √2gR
So in the case a = 2, the maximum height reached by the projectile is infinite.
To learn more about escape velocity click here; brainly.com/question/31201121
#SPJ11
. An object 1.7 cm high is held 2.5 cm from a person's cornea, and its reflected image is measured to be 0.167 cm high. Think & Prepare 1. What kind of mirror is the cornea, convex or concave?
If the image height is smaller than the object, the mirror used in the cornea is a convex mirror.
Object height (h_o) = 1.7 cm
Object distance (u) = 2.5 cm
Image height (h_i) = 0.167 cm
To find whether the mirror used is convex or concave, we need to consider the properties of the image.
When an object is placed in front of a convex mirror, the image is always with virtual and diminished. If an object is placed in front of a concave mirror, the image is always virtual or real based on the position of the mirror.
In the given scenario, the image height is smaller than the object.
Therefore we can conclude that the cornea acts as a convex mirror.
To learn more about Convex mirror
https://brainly.com/question/33230797
#SPJ4
The dampening material in an ultrasound system is often made of
_________, and its function is to _______the pulses.
The dampening material used in an ultrasound system is often made of rubber or silicone, and its function is to absorb or reduce the intensity of the ultrasound pulses.
In an ultrasound system, the dampening material is an essential component that helps optimize the performance of the device. The material used for dampening is typically rubber or silicone, which have excellent acoustic properties. The primary purpose of the dampening material is to absorb or reduce the intensity of the ultrasound pulses emitted by the transducer.
Ultrasound pulses consist of high-frequency waves that are emitted and received by the transducer. When these pulses travel through the body, they encounter various interfaces between different tissues and organs, leading to reflections and echoes. If the ultrasound pulses were not dampened, they could bounce back and interfere with subsequent pulses, causing artifacts and reducing image quality.
By placing a layer of rubber or silicone as the dampening material in the ultrasound system, the pulses encounter resistance as they pass through the material. This resistance helps absorb or attenuate the energy of the pulses, reducing their intensity before they reach the patient's body. As a result, the echoes and reflections are less likely to interfere with subsequent pulses, allowing for clearer and more accurate imaging.
The choice of rubber or silicone as the dampening material is based on their ability to effectively absorb and attenuate ultrasound waves. These materials have properties that allow them to convert the mechanical energy of the ultrasound pulses into heat, dissipating the energy and minimizing reflection or transmission of the waves. Additionally, rubber and silicone are flexible and easily conform to the shape of the transducer, ensuring good acoustic contact and optimal dampening of the ultrasound pulses.
In conclusion, the dampening material used in an ultrasound system, typically made of rubber or silicone, serves the vital function of absorbing or reducing the intensity of ultrasound pulses. By attenuating the energy of the pulses, the dampening material helps prevent artifacts and interference, leading to improved image quality and more accurate diagnostic results.
Learn more about ultrasound here:
brainly.com/question/31609447
#SPJ11
If you wish to decrease the power produced in a heating device four times, you could:
A. decrease the current four times, while keeping the resistance the same
B. decrease the voltage four times, while keeping the resistance the same
C. The answer is not listed among the given choices
D. double the resistance, while keeping the voltage the same
If you wish to decrease the power produced in a heating device four times, you could decrease the voltage four times, while keeping the resistance the same. Option B is correct.
The power (P) in an electrical circuit can be calculated using the formula:
P = (V²) / R
Where:
P = Power
V = Voltage
R = Resistance
Since power is directly proportional to the voltage squared and inversely proportional to the resistance, decreasing the voltage four times (V/4) will result in the power being reduced by a factor of (V/4)² = 1/16 (four times four). This will achieve the desired reduction in power.
Hence Option B is correct.
Learn more about power-
brainly.com/question/11569624
#SPJ11
An alien pilot of an intergalactic spaceship is traveling at 0.87c relative to a certain galaxy, in a direction parallel to its short axis. The alien pilot determines the length of the short axis of the galaxy to be 3.0 × 10^17 km. What would the length of this axis be as measured by an observer living on a planet within the galaxy?
The length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be approximately 4.1 × 10^17 km.
The length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be longer than the length measured by the alien pilot due to the effects of length contraction. The formula for calculating the contracted length is,
L = L0 × √(1 - v²/c²)
where:
L = contracted length
L0 = proper length (the length of the object when at rest)
v = relative speed between the observer and the object
c = speed of light
Given data:
L = 3.0 × 10¹⁷ km
v = 0.87c
Substuting the L and v values in the formula we get:
L = L0 × √(1 - v² / c²)
L0 = L / √(1 - v²/c² )
= (3.0 × 10¹⁷ km) / √(1 - (0.87c)²/c²)
= (3.0 × 10¹⁷km) /√(1 - 0.87²)
= 4.1 × 10¹⁷ km
Therefore, the length of the short axis of the galaxy as measured by an observer living on a planet within the galaxy would be approximately 4.1 × 10^17 km.
To learn more about length contraction:
https://brainly.com/question/17407131
#SPJ4
Four objects are located on the Y axis: the 2.0 Kg object is 3.0 m from the origin; the 3.0 kg one is 2.5 m from the origin; the 2.5 kg one is at the origin; and the 4.0 Kg is located -0.50 m from the origin. Where is the center of mass of these objects?
The answer is, "The center of mass of these objects is located 0.83 meters from the origin."
To find out the center of mass of a set of objects, the following formula can be used:
[tex]\frac{\sum m_ix_i}{\sum m_i}[/tex]
where $m_i$ is the mass of the object, and $x_i$ is its distance from a reference point.
The values can be substituted into the formula to get the center of mass. So let's compute the center of mass of these objects:
[tex]\frac{(2.0\text{ Kg})(3.0\text{ m}) + (3.0\text{ Kg})(2.5\text{ m}) + (2.5\text{ Kg})(0.0\text{ m}) + (4.0\text{ Kg})(-0.50\text{ m})}{2.0\text{ Kg} + 3.0\text{ Kg} + 2.5\text{ Kg} + 4.0\text{ Kg}}\\=\frac{6.0\text{ Kg m}+7.5\text{ Kg m}-2.0\text{ Kg m}-2.0\text{ Kg m}}{11.5\text{ Kg}}\\=\frac{9.5\text{ Kg m}}{11.5\text{ Kg}}\\=0.83\text{ m}[/tex]
Therefore, the center of mass of the four objects is located at 0.83 meters from the origin.
The answer is, "The center of mass of these objects is located 0.83 meters from the origin."
To know more about center of mass, visit:
https://brainly.com/question/27549055
#SPJ11
7. A beam of light travels through medium x with a speed of 1.8.108 meters per seconds. Calculate the absolute index of reflection of medium X 8. Which quantity is equivalent to the product of the absolute index of refraction of water and the speed of light in water? a. wavelength of light in a vacuum b. frequency of light in water c. sine of the angle of incidence d. speed of light in vacuum. 9. When a ray light strikes a mirror perpendicular to its surface what is the angle of reflection.
According to the laws of reflection, the angle of incidence is equal to the angle of reflection. Hence, when the incident angle is 0 degrees, the angle of reflection is also 0 degrees.
7. Absolute index of reflection of medium X can be defined as the ratio of speed of light in vacuum to the speed of light in medium X. It is given that the speed of light in medium X is 1.8.10^8 meters per second. The speed of light in vacuum is 3.0.10^8 meters per second.
Therefore, the absolute index of reflection of medium X is given by:
NX = Speed of light in vacuum/ Speed of light in medium
X= 3.0.10^8/ 1.8.10^8= 1.67.8.
The quantity which is equivalent to the product of the absolute index of refraction of water and the speed of light in water is the wavelength of light in water.9. When a ray of light strikes a mirror perpendicular to its surface, the angle of reflection is 0 degree as the angle between the normal to the surface of the mirror and the incident ray is 90 degrees.
According to the laws of reflection, the angle of incidence is equal to the angle of reflection. Hence, when the incident angle is 0 degrees, the angle of reflection is also 0 degrees.
Therefore, the answer is 0 degree.
learn more about incidence here
https://brainly.com/question/30402542
#SPJ11
As a new electrical technician, you are designing a large solenoid to produce a uniform 0.130 T magnetic field near the center of the solenoid. You have enough wire for 3000 circular turns. This solenoid must be
52.0 cm long and 2.80 cm in diameter.
What current will you need to produce the necessary field?
The magnetic field produced inside a solenoid is given asB=μ₀(n/l)I ,Where,μ₀= 4π×10^-7 T m A^-1is the permeability of free space,n is the number of turns per unit length,l is the length of the solenoid, andI is the current flowing through the wire.The solenoid has 3000 circular turns and is 52.0 cm long and 2.80 cm in diameter, and the magnetic field produced near the center of the solenoid is 0.130 T.Thus,The length of the solenoid,l= 52.0 cm = 0.52 mn= 3000 circular turns/lπd²n = 3000 circular turns/π(0.028 m)²I = ?The magnetic field equation can be rearranged to solve for current asI= (Bμ₀n/l),whereB= 0.130 Tμ₀= 4π×10^-7 T m A^-1n= 3000 circular turns/π(0.028 m)²l= 0.52 mThus,I= (0.130 T×4π×10^-7 T m A^-1×3000 circular turns/π(0.028 m)²)/0.52 m≈ 5.49 ATherefore, the current required to produce the required magnetic field is approximately 5.49 A.
The answer is a current of 386 A will be necessary. We know that the solenoid must produce a magnetic field of 0.130 T and that it has 3000 circular turns. We can determine the number of turns per unit length as follows: n = N/L, where: N is the total number of turns, L is the length
Substituting the given values gives us: n = 3000/(0.52 m) = 5769 turns/m
We can use Ampere's law to determine the current needed to produce the necessary field. According to Ampere's law, the magnetic field inside a solenoid is given by:
B = μ₀nI,where: B is the magnetic field, n is the number of turns per unit length, I is the current passing through the solenoid, μ₀ is the permeability of free space
Solving for the current: I = B/(μ₀n)
Substituting the given values gives us:I = 0.130 T/(4π×10⁻⁷ T·m/A × 5769 turns/m) = 386 A
I will need a current of 386 A to produce the necessary magnetic field.
Learn more about magnetic field: https://brainly.com/question/14411049
#SPJ11
"Why might a low metalicity environment lead to larger black
holes forming?
In a low metallicity environment, where the abundance of heavy elements like carbon, oxygen, and iron is relatively low, the formation of larger black holes can be influenced by several factors.
First, low metallicity implies that there is less material available to cool and fragment, leading to the formation of massive stars. Massive stars are more likely to undergo core-collapse supernovae, leaving behind massive stellar remnants that can potentially evolve into black holes.Secondly, metal-rich environments can enhance the efficiency of mass loss through stellar winds, reducing the mass available for black hole formation. In contrast, low metallicity environments have weaker winds, allowing more mass to be retained by the stars, contributing to the formation of larger black holes.Furthermore, low metallicity environments also have lower opacity, which facilitates the accretion of mass onto the forming black holes. This increased accretion can lead to the growth of black holes to larger sizes over time. Overall, the combination of these factors in a low metallicity environment can favor the formation and growth of larger black holes.Learn more about the black holes:
brainly.com/question/6037502
#SPJ11
A block with a mass m is floating on a liquid with a massdensity . The block has a cross-sectional area and
height . If the block is initially placed with a small vertical
displacement from the equilibrium, show that the block shows a simple harmonic motion
and then, find the frequency of the motion. Assume uniform vertical gravity with the
acceleration g
When a block with a mass of m is floating on a liquid with a mass density of ρ, the block has a cross-sectional area of A and an
acceleration
of g.
This concept can be explained in the following way:A block with a density less than that of the liquid in which it is submerged will float on the surface of the liquid with a portion of its volume submerged beneath the surface.
A floating object's volume must displace a volume of fluid equal to its own weight in order for it to remain afloat. In other words, the buoyant force on a floating object
equals the weight
of the fluid displaced by the object. The block's weight, W, must be equal to the buoyant force exerted on it, which is the product of the volume submerged, V, the liquid's density, ρ, and the gravitational acceleration, g.
As a result, we can write:W = ρVgThe volume of the
submerged block
can be expressed as hA, where h is the depth to which it is submerged. As a result, we can write V = hA. Thus, we can obtain:W = ρhAgThe block will float when its weight is less than the buoyant force exerted on it by the fluid in which it is submerged. This is when we have W < ρVg.
to know more about
acceleration
pls visit-
https://brainly.com/question/2303856
#SPJ11
Suppose 1018 electrons start at rest and move along a wire brough a + 12-V potential difference. (a) Calculate the change in clectrical potential energy of all the electrons. (b) The final speed of the electrons is 0.10 m/s.
Suppose 10¹⁸ electrons start at rest and move along a wire brough a + 12 V potential difference.
(a) The change in electrical potential energy of all the electrons is -1.92 x 10⁻¹ Joules.
(b) The final speed of the electrons is 0.10 m/s is 4.55 x 10⁻³³ Joules.
(a) To calculate the change in electrical potential energy of all the electrons, we can use the formula:
ΔPE = q * ΔV
where ΔPE is the change in electrical potential energy, q is the charge, and ΔV is the change in potential difference.
Given:
Number of electrons (n) = 10¹⁸
Charge of one electron (q) = -1.6 x 10⁻¹⁹ C
Change in potential difference (ΔV) = +12 V (positive because the electrons move from a higher potential to a lower potential)
Substituting the values into the formula:
ΔPE = (10¹⁸) * (-1.6 x 10⁻¹⁹ C) * (+12 V)
= -1.92 x 10⁻¹ J
The change in electrical potential energy of all the electrons is approximately -1.92 x 10⁻¹ Joules.
(b) The final speed of the electrons is given as 0.10 m/s. To calculate the change in kinetic energy, we need to know the mass of the electrons. The mass of one electron is approximately 9.1 x 10⁻³¹ kg.
Change in kinetic energy (ΔKE) = (1/2) * m * (v²)
where m is the mass of one electron and v is the final speed of the electrons.
Substituting the values into the formula:
ΔKE = (1/2) * (9.1 x 10⁻³¹ kg) * (0.10 m/s)²
= 4.55 x 10⁻³³ J
The change in kinetic energy of all the electrons is approximately 4.55 x 10⁻³³ Joules.
To know more about potential difference here
https://brainly.com/question/23716417
#SPJ4
(a) The change in electrical potential energy of all the electrons is 1.92 x 10^-18 J.
(b) The final speed of the electrons is 0.10 m/s.
(a) To calculate the change in electrical potential energy of all the electrons, we use the formula ΔPE = qΔV, where q is the charge on an electron and ΔV is the change in potential difference.
Given:
q = 1.6 x 10^-19 C (charge on an electron)
ΔV = 12 V (change in potential difference)
Using the formula, we have:
ΔPE = qΔV
ΔPE = (1.6 x 10^-19 C) x (12 V)
ΔPE = 1.92 x 10^-18 J
Therefore, the change in electrical potential energy of all the electrons is 1.92 x 10^-18 J.
(b) The final speed of the electrons is given as 0.10 m/s.
The question does not explicitly ask for the current flowing through the wire, but it can be determined using the formula I = neAv, where n is the number of electrons, e is the charge on one electron, and A is the area of the cross-section of the wire. However, the area of the wire is not provided, so we cannot calculate the current accurately.
If we assume the area of the cross-section of the wire to be 1 mm^2 (0.000001 m^2), then we can calculate the current as follows:
Given:
n = 1.01 x 10^18 (number of electrons)
e = 1.6 x 10^-19 C (charge on one electron)
A = 0.000001 m^2 (assumed area of the cross-section of the wire)
Using the formula, we have:
I = neAv
I = (1.01 x 10^18) x (1.6 x 10^-19 C) x (0.000001 m^2)
I = 1.6224 A
Therefore, the current flowing through the wire is 1.6224 A.
Please note that the resistance of the wire is not provided in the question, so we cannot calculate it accurately without that information.
Additionally, the time taken by the electrons to travel through the wire is not explicitly asked in the question, but if we assume the length of the wire to be 1 m and the final velocity of the electrons to be 0.10 m/s, we can calculate the time as follows:
Given:
l = 1 m (length of the wire)
v = 0.10 m/s (final velocity of the electrons)
Using the formula, we have:
t = l / v
t = 1 m / 0.10 m/s
t = 10 s
Therefore, the time taken by the electrons to travel through the wire is 10 seconds.
Learn more about electrical potential energy:
https://brainly.com/question/24284560
#SPJ11
In the figure(Figure 1) the coefficient of static friction between mass mA and the table is 0.43, whereas the coefficient of kinetic friction is 0.33.What value of mAmA will keep the system moving at constant speed?
To keep the system moving at a constant speed, the applied force must balance the frictional forces acting on the system.
The maximum static frictional force is given by the equation F_static = μ_static * N, where μ_static is the coefficient of static friction and N is the normal force. The kinetic frictional force is given by F_kinetic = μ_kinetic * N. Since the system is moving at a constant speed, the applied force must equal the kinetic frictional force. Therefore, to find the value of mA that keeps the system moving at a constant speed, we can set the applied force equal to the kinetic frictional force and solve for mass mA.
F_applied = F_kinetic
mA * g = μ_kinetic * (mA + mB) * g
By substituting the given values for μ_kinetic and solving for mass mA, we can find the value that keeps the system moving at a constant speed.
Learn more about speed here:
brainly.com/question/17661499
#SPJ11
The half-life of 14C is 5730 yr, and a constant ratio of 14C/12C = 1.3 x 10-12 is maintained in all living tissues. A fossil is found to have 14c/12C = 3.07 x 10-13. How old is the fossil? Your response differs from the correct answer by more than 10%. Double check your calculations. yr Need Help? Read It
The fossil's age can be determined using the concept of radioactive decay and the known half-life of 14C. The estimated age of the fossil is approximately 8522 years.
Given that the ratio of 14C/12C in living tissues is maintained at 1.3 x 10-12 and the fossil's ratio is measured to be 3.07 x 10-13, we can calculate its age.
By comparing the ratios, we can see that the fossil has undergone a decrease in the amount of 14C relative to 12C. The decrease in the ratio occurs due to the radioactive decay of 14C over time. Since the half-life of 14C is 5730 years, we can calculate the number of half-lives that have passed by taking the logarithm of the ratio change:
log(3.07 x 10-13 / 1.3 x 10-12) / log(0.5) = -0.448 / -0.301 = 1.487
Therefore, the fossil is approximately 1.487 half-lives old. Multiplying this by the half-life of 5730 years gives us the age of the fossil:
1.487 x 5730 years ≈ 8522 years
So, the estimated age of the fossil is approximately 8522 years.
Learn more about radioactive decay here; brainly.com/question/30416114
#SPJ11
A 10.9-V battery, 5.09-resistor, and a 3.5-H inductor are connected in series. After the current in the circuit has reached Is maximum valor, calculate the following (a) the power being supplied by the battery w (b) the power being delivered to the resistor w (c) the power being delivered to the Inductor w (d) the energy stored in the magnetic ned of the inductor
It can be seen that the circuit is a series circuit, hence the current passing through the circuit is same in the entire circuit. Let the current in the circuit be I. The voltage drop across the resistor is given by IR.
Hence the time derivative of current is zero, i.e., di/dt = 0.Substituting this in the above equation, we get V = I max R. This gives the value of I max = 10.9/5.09The value of I max is 2.14 A.
Power supplied by the battery; The power supplied by the battery is given by;
P = VI
Where
V = 10.9 V and
I = 2.14 A
Substituting these values, we get;
P = 23.3 W
Power delivered to the resistor; The power delivered to the resistor is given by;
P = I²R
Where
I = 2.14 A and
R = 5.09 ohm
Substituting these values, we get;
P = 24.6 W
Power delivered to the inductor; The power delivered to the inductor is given by;
P = I²L(di/dt)
I = 2.14 A,
L = 3.5 H and
di/dt = 0
Substituting these values, we get; P = 0
Energy stored in the magnetic field of the inductor; The energy stored in the magnetic field of the inductor is given by;
W = (1/2)LI²
Where
I = 2.14 A and
L = 3.5 H
Substituting these values, we get; W = 16.46 J
To know more about circuit visit:
https://brainly.com/question/15449650
#SPJ11
Required information Sheena can row a boat at 2.00 mi/h in still water. She needs to cross a river that is 1.20 mi wide with a current flowing at 1.80 mi/h. Not having her calculator ready, she guesses that to go straight across, she should head upstream at an angle of 25.0* from the direction straight across the river. In order to go straight across, what angle upstream should she have headed?
Sheena should have headed upstream at an angle of approximately 42.99° in order to go straight across the river.
Let's consider the velocities involved in this scenario. Sheena's velocity in still water is given as 2.00 mi/h, and the velocity of the river current is 1.80 mi/h.
To determine the resultant velocity required for the boat to move straight across the river, we can use vector addition. The magnitude of the resultant velocity can be found using the Pythagorean theorem:
Resultant velocity = [tex]\sqrt{(velocity of the boat)^2 + (velocity of the current)^2}[/tex].
Substituting the given values, we have:
Resultant velocity = [tex]\sqrt{(2.00^2 + 1.80^2)}\approx2.66 mi/h.[/tex]
Now, let's determine the angle upstream that Sheena should have headed. We can use trigonometry and the tangent function. The tangent of the angle upstream can be calculated as:
tan(angle upstream) = [tex]\frac{(velocity of the current) }{(velocity of the boat)}[/tex].
Substituting the given values, we have:
tan(angle upstream) = [tex]\frac{1.80}{2.00} = 0.9[/tex].
To find the angle upstream, we can take the inverse tangent (arctan) of both sides:
angle upstream ≈ arctan(0.9) ≈ 42.99°.
Therefore, Sheena should have headed upstream at an angle of approximately 42.99° in order to go straight across the river.
Learn more about upstream here: brainly.com/question/29574700
#SPJ11
The power of a toaster can be determined if which of the following values are known? A the dimensions of the toaster B C the resistance of the toaster's insulation the voltage applied to the toaster and the toaster's temperature D the current through the circuit and the voltage applied to the toaster
The power of a toaster can be determined if the current through the circuit and the voltage applied to the toaster are known. The correct answer is option d.
Power (P) is calculated using the formula P = I × V, where I represents the current and V represents the voltage. By measuring or obtaining these values, the power consumption of the toaster can be determined. The current can be measured using an ammeter, and the voltage can be measured using a voltmeter.
Once these measurements are obtained, simply multiply the current and voltage values together to calculate the power. This information is crucial for understanding the toaster's energy consumption, as it allows you to assess its efficiency and make comparisons with other devices.
The correct answer is option d.
To know more about voltage refer to-
https://brainly.com/question/32002804
#SPJ11
Predict how much torque is affecting this simple motor. The area inside the rectangle is 15 cm2, the current it carries is 9 A, the magnetic field has a magnitude of 20 * 10-3 T, and the angle between the area vector and the magnetic field is 1.0 radians.
The torque affecting the simple motor can be predicted as 6 * 10⁻⁷ m² * T * sin(1.0 radians).
The torque (τ) affecting the motor can be calculated using the formula:
τ = A * B * sin(θ)
where:
A is the area of the rectangle (15 cm²),
B is the magnitude of the magnetic field (20 * 10^-3 T),
θ is the angle between the area vector and the magnetic field (1.0 radians).
Substituting the given values into the formula, we have:
τ = 15 cm² * 20 * 10^-3 T * sin(1.0 radians)
To simplify the calculation, we convert the area from cm² to m²:
τ = (15 cm² * 10^-4 m²/cm²) * 20 * 10^-3 T * sin(1.0 radians)
τ = 3 * 10^-4 m² * 20 * 10^-3 T * sin(1.0 radians)
τ = 6 * 10^-7 m² * T * sin(1.0 radians)
To learn more about area -
brainly.com/question/29813972
#SPJ11
Oscillations in the elevator Gravity stretches an elastic thin wire of 1 m length by 15.5 mm as 500 g mass is attached. Determine the oscillation period, if the wire is initially stretched a little more. Which length does a pendulum thread need to have, if the pendulum should have the same period? Now put the pendulum into an elevator. The elevator accelerates and is going up: The velocity increases linearly in time during the first 3 s until reaching 24 m/s. Sketch the deflections of the pendulum versus time t in the elevator frame of reference 0.5 s before the elevator starts until 0.5 s after the start. The initial deflection is 1°. How will the deflection amplitude change qualitatively? What sort of motions of the pendulum can be observed if the elevator is going down with 9.81 m/s²?
If the elevator is going down with an acceleration of 9.81 m/s² (equal to the acceleration due to gravity), the pendulum will not experience any additional pseudo-force.
To determine the oscillation period of the elastic wire, we can use Hooke's law:
F = k * x
where F is the force, k is the spring constant, and x is the displacement.
Given that the wire is stretched by 15.5 mm (or 0.0155 m) with a 500 g (or 0.5 kg) mass attached, we can calculate the force:
F = m * g = 0.5 kg * 9.81 m/s^2 = 4.905 N
We can now solve for the spring constant:
k = F / x = 4.905 N / 0.0155 m = 316.45 N/m
The oscillation period can be calculated using the formula:
T = 2π * √(m / k)
T = 2π * √(0.5 kg / 316.45 N/m) ≈ 0.999 s
If the wire is initially stretched a little more, the oscillation period will remain the same since it depends only on the mass and the spring constant.
To find the length of the pendulum thread that would have the same period, we can use the formula for the period of a simple pendulum:
T = 2π * √(L / g)
Where L is the length of the pendulum thread and g is the acceleration due to gravity (approximately 9.81 m/s²).
Rearranging the formula, we can solve for L:
L = (T / (2π))^2 * g = (0.999 s / (2π))^2 * 9.81 m/s² ≈ 0.248 m
Therefore, the pendulum thread needs to have a length of approximately 0.248 m to have the same period as the elastic wire.
If the pendulum is put into an elevator that is accelerating upwards, the deflection of the pendulum versus time will change. Initially, before the elevator starts, the deflection will be 1°. As the elevator accelerates upwards, the deflection will increase due to the pseudo-force acting on the pendulum. The deflection will follow a sinusoidal pattern, with the amplitude gradually increasing until the elevator reaches its maximum velocity. The deflection will then start decreasing as the elevator decelerates or comes to a stop.
If the elevator is going down with an acceleration of 9.81 m/s² (equal to the acceleration due to gravity), the pendulum will not experience any additional pseudo-force. In this case, the pendulum will behave as if it is in a stationary frame of reference, and the deflection will follow a simple harmonic motion with a constant amplitude, similar to the case without any acceleration.
Learn more about oscillation here:
https://brainly.com/question/12622728
#SPJ11
7. 7. A 1000Kg car moves at 10m/s, determine the momentum of the
car.
The momentum of the car is 10,000 kg·m/s
The momentum of an object is calculated by multiplying its mass by its velocity. In this case, the car has a mass of 1000 kg and is moving at a velocity of 10 m/s.
The momentum (p) of the car can be calculated using the formula:
p = mass × velocity
Substituting the given values, we have:
p = 1000 kg × 10 m/s
p = 10,000 kg·m/s
Therefore, the momentum of the car is 10,000 kg·m/s. Momentum is a vector quantity, meaning it has both magnitude and direction. In this case, the direction of the momentum will be the same as the direction of the car's velocity.
Learn more about momentum here:
https://brainly.com/question/1042017
#SPJ11
A thick layer of an unknown transparent liquid sits on top of water.
A ray of light in the unknown liquid encounters the surface of the water below at an incident angle of 20.0°. The ray refracts to an angle of 22.1°. If the index of refraction of water is 1.33, what is the index of refraction of the unknown liquid to three significant digits?
The index of refraction of the unknown transparent liquid is 1.21. When a ray of light goes from one medium into another, it bends or refracts at the boundary of the two media. The angle at which the incident ray approaches the boundary line is known as the angle of incidence, and the angle at which it refracts into the second medium is known as the angle of refraction.
The index of refraction for a material is a measure of how much the speed of light changes when it passes from a vacuum to the material. It may also be stated as the ratio of the speed of light in a vacuum to the speed of light in the material. It may also be used to determine the degree to which light is bent or refracted when it passes from one material to another with a different index of refraction. The following is the answer to the question:A ray of light travelling through the unknown transparent liquid has an incident angle of 20.0° and is then refracted to 22.1° upon reaching the water below.
The index of refraction for the unknown transparent liquid can be found using the following equation:
n1sinθ1 = n2sinθ2
where,θ1 is the angle of incidence,θ2 is the angle of refraction,n1 is the index of refraction of the first medium,n2 is the index of refraction of the second medium.
By substituting the values of θ1, θ2, and n1 into the above equation, we get:
n2 = n1 sin θ1 / sin θ2n1 = 1.33 (given)
n2 = n1 sin θ1 / sin θ2
= 1.33 sin 20.0° / sin 22.1°
= 1.21 to three significant figures.
To know more about refraction visit:-
https://brainly.com/question/13088981
#SPJ11
2. Two closeby speakers produce sound waves. One of the speakers vibrates at 400 Hz. What would be the frequency of the other speaker, which produces 10 Hz of beats? A. 10 Hz B. 390 Hz C. 410 Hz
Summary:
The frequency of the other speaker would be 390 Hz. When two closeby speakers produce sound waves, a phenomenon known as beats can occur. Beats are the periodic variations in the intensity or loudness of sound that result from the interference of two waves with slightly different frequencies.
Explanation:
In this case, if one speaker vibrates at 400 Hz and the beats have a frequency of 10 Hz, it means that the frequency of the other speaker is slightly different. The beat frequency is the difference between the frequencies of the two speakers. So, by subtracting the beat frequency of 10 Hz from the frequency of one speaker (400 Hz), we find that the frequency of the other speaker is 390 Hz.
To understand this concept further, let's delve into the explanation. When two sound waves with slightly different frequencies interact, they undergo constructive and destructive interference, resulting in a periodic variation in the amplitude of the resulting wave. This variation is what we perceive as beats. The beat frequency is equal to the absolute difference between the frequencies of the two sound waves. In this case, the given speaker has a frequency of 400 Hz, and the beat frequency is 10 Hz. By subtracting the beat frequency from the frequency of the given speaker (400 Hz - 10 Hz), we find that the frequency of the other speaker is 390 Hz. This frequency creates the interference pattern that produces the 10 Hz beat frequency when combined with the 400 Hz wave. Therefore, the correct answer is B. 390 Hz.
Learn more about Periodic Variations here brainly.com/question/15295474
#SPJ11
(a) In brief terms, provide an account of nuclear instability, making use of the Nuclear chart "Segré chart" to illustrate your answer. (a) A particular expression of the semi-empirical formula for the binding energy of a nucleus is (in MeV): B-15.5 A-16.842) - 0.72 Z+/A!) – 19(N=Z)'/A Discuss the origin of each ten
Nuclear instability refers to the tendency of certain atomic nuclei to undergo decay or disintegration due to an imbalance between the forces that hold the nucleus together and the forces that repel its constituents.
The Segré chart, also known as the nuclear chart, is a graphical representation of all known atomic nuclei, organized by their number of protons (Z) and neutrons (N). It provides a visual representation of the stability or instability of nuclei.
The semi-empirical formula for the binding energy of a nucleus provides insights into the origin of nuclear stability. The formula is given by B = (15.5A - 16.842) - 0.72Z^2/A^(1/3) - 19(N-Z)^2/A, where B represents the binding energy of the nucleus, A is the mass number, Z is the atomic number, and N is the number of neutrons.
The terms in the formula have specific origins. The first term, 15.5A - 16.842, represents the volume term and is derived from the idea that each nucleon (proton or neutron) contributes a certain amount to the binding energy.
The second term, -0.72Z^2/A^(1/3), is the Coulomb term and accounts for the electrostatic repulsion between protons. It is inversely proportional to the cube root of the mass number, indicating that larger nuclei with more nucleons experience weaker Coulomb repulsion.
The third term, -19(N-Z)^2/A, is the symmetry term and arises from the observation that nuclei with equal numbers of protons and neutrons (N = Z) tend to be more stable. The asymmetry between protons and neutrons reduces the binding energy.
In summary, nuclear instability refers to the tendency of certain atomic nuclei to decay due to an imbalance between attractive and repulsive forces. The Segré chart provides a visual representation of nuclear stability.
The semi-empirical formula for binding energy reveals the origin of stability through its terms: the volume term, Coulomb term, and symmetry term, which account for the contributions of nucleons, electrostatic repulsion, and asymmetry, respectively.
Learn more about asymmetry here
brainly.com/question/30639121
#SPJ11
A uniform 10kg, 2m, horizontal tree branch is attached to a tree on the left side. At the far right end, a vine is wrapped around the branch and is pulling on it at an angle of 20° above the positive z-axis. Two birds are perched on the branch: a .02kg bird. Im from the left end of the branch and a .05kg bird .3m from the right end of the branch. The birds and branch are completely motionless. (a) What's the tension in the vine? (b) What are the z and y components of the support force exerted by the tree on the branch?
(a) The tension in the vine is equal to the weight of the branch plus the weights of the birds on the branch. (b) The z-component of the support force exerted by the tree on the branch is equal to the tension in the vine, while the y-component is the sum of the weights of the branch and the birds.
(a) The tension in the vine can be determined by considering the equilibrium of forces acting on the branch. Since the birds and the branch are motionless, the net force in the vertical direction must be zero. First, let's find the vertical components of the weights of the birds:
Weight of the first bird = m1 * g = 0.02 kg * 9.8 m/s^2 = 0.196 N
Weight of the second bird = m2 * g = 0.05 kg * 9.8 m/s^2 = 0.49 N
The total vertical force acting on the branch is the sum of the weights of the birds and the tension in the vine:
Total vertical force = Weight of first bird + Weight of second bird + Tension in the vine
Since the branch is in equilibrium, the total vertical force must be zero:
0.196 N + 0.49 N + Tension in the vine = 0
Solving for the tension in the vine:
Tension in the vine = -(0.196 N + 0.49 N) = -0.686 N
Therefore, the tension in the vine is approximately 0.686 N.
(b) The support force exerted by the tree on the branch has both z and y components.
The z-component of the support force can be determined by considering the equilibrium of torques about the left end of the branch. Since the branch and birds are motionless, the net torque about the left end must be zero.
The torque due to the tension in the vine is given by:Torque due to tension = Tension in the vine * Distance from the left end of the branch to the point of application of tension
Since the branch is in equilibrium, the torque due to the tension must be balanced by the torque due to the support force exerted by the tree. Therefore:
Torque due to support force = -Torque due to tension
The y-component of the support force can be found by considering the vertical equilibrium of forces. Since the branch and birds are motionless, the net force in the vertical direction must be zero.
The z and y components of the support force exerted by the tree on the branch can be determined by solving these equations simultaneously.
Given the values and distances provided, the specific magnitudes of the z and y components of the support force cannot be determined without additional information or equations of equilibrium.
To learn more about tension in the vine, Click here:
https://brainly.com/question/13339690
#SPJ11
In a well, water table depth is 500ft, reservoir depth is
4000ft. the average pressure gradient of the formation brine is
0.480psi/ft. what is the reservoir pressure in this well?
The reservoir pressure in the well is approximately 956551.1 psi where the water table depth is 500ft and the reservoir depth is 4000ft.
Given data: Depth of water table = 500 ft
Reservoir depth = 4000 ft
Average pressure gradient of formation brine = 0.480 psi/ft
Formula used: P = Po + ρgh where P = pressure at a certain depth
Po = pressure at the surfaceρ = density of fluid (brine)g = acceleration due to gravity
h = depth of fluid (brine)
Let's calculate the reservoir pressure using the given data and formula.
Pressure at the surface (Po) is equal to atmospheric pressure which is 14.7 psi.ρ = 8.34 lb/gal (density of brine)g = 32.2 ft/s²Using the formula,
P = Po + ρghP = 14.7 + 8.34 × 32.2 × (4000 - 500)P = 14.7 + 8.34 × 32.2 × 3500P = 14.7 + 956536.4P = 956551.1 psi
Therefore, the reservoir pressure in the well is approximately 956551.1 psi.
More on reservoir pressure: https://brainly.com/question/29618842
#SPJ11
7. Two massive objects (M1=M2=N#)kg attract each other with a force 0.128 N. What happens to the force between them if the separation between their centers is reduced to one-eighth its. original value? (Hint: F=GM2M1/R2 ) The force is now equal to : a) 3.6 N b) 42 N c) 8.2 N d) 96 N e) None of these is true
The correct answer to the question “Two massive objects (M1=M2=N#)kg attract each other with a force 0.128 N.
What happens to the force between them if the separation between their centers is reduced to one-eighth its.
original value?” is that the force is now equal to 8.2 N.
What is the gravitational force?
The force of attraction between two objects because of their masses is known as gravitational force.
The formula to calculate gravitational force is
F = Gm₁m₂/d²
where,F = force of attraction between two masses
G = gravitational constant
m₁ = mass of the first object
m₂ = mass of the second object
d = distance between the two masses.
As per the question given, the gravitational force (F) between two objects
M1=M2=N#
= N kg is 0.128 N.
Now, we are to find the new force when the distance between their centers is reduced to one-eighth of its original value.
So, we can assume that the distance is now d/8,
where d is the initial distance.
Using the formula of gravitational force and plugging the values into the formula, we have,
0.128 = G × N × N / d²
⇒ d² = G × N × N / 0.128
d = √(G × N × N / 0.128)
On reducing the distance to 1/8th, the new distance between the objects will be d/8.
Hence, we can write the new distance as d/8, which means new force F' is given as
F' = G × N × N / (d/8)²
F' = G × N × N / (d²/64)
F' = G × N × N × 64 / d²
Now, substituting the values of G, N, and d, we get
F' = 6.67 × 10^-11 × N × N × 64 / [(√(G × N × N / 0.128)]²
F' = 6.67 × 10^-11 × N × N × 64 × 0.128 / (G × N × N)
F' = 8.2 N
Thus, the new force between the two objects is 8.2 N.
Therefore, option C is correct.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11