Question 4 An electron has a total energy of 4.41 times its rest energy. What is the momentum of this electron? (in keV) с 1 pts

The value of the largest and smallest angles of the second polarizer, which would allow for the observed intensity of 2% of the initial light intensity, can be determined based on the concept of Malus's law.

Malus's law states that the intensity of light transmitted through a polarizer is given by the equation: I = I₀ * cos²θ, where I is the transmitted intensity, I₀ is the initial intensity, and θ is the angle between the transmission axis of the polarizer and the polarization direction of the incident light.

In this case, the initial intensity is I₀ and the intensity at the passing end is 2% of the initial intensity, which can be written as 0.02 * I₀.

Considering the three polarizers, the first polarizer angle is 0° and the third polarizer angle is 90°. Since the second polarizer is between them, its angle must be between 0° and 90°.

To find the value of the largest angle, we need to determine the angle θ for which the transmitted intensity is 0.02 * I₀. Solving the equation 0.02 * I₀ = I₀ * cos²θ for cos²θ, we find cos²θ = 0.02.

Taking the square root of both sides, we have cosθ = √0.02. Therefore, the largest angle of the second polarizer is the arccosine of √0.02, which is approximately 81.8°.

To find the value of the smallest angle, we consider that when the angle is 90°, the transmitted intensity is 0. Therefore, the smallest angle of the second polarizer is 90°.

Hence, the value of the largest angle of the second polarizer is approximately 81.8°, and the value of the smallest angle is 90°.

learn more about "intensity":- https://brainly.com/question/28145811

#SPJ11

The total current in the circuit is 0.028 (A).

To find the total current in the circuit, we can use Ohm's Law and the concept of total resistance in a series circuit. In a series circuit, the total resistance (R_total) is the sum of the individual resistances.

Given resistors:

R1 = 78 Ω

R2 = 35 Ω

R3 = 60 Ω

R4 = 42 Ω

Total resistance (R_total) in the circuit:

R_total = R1 + R2 + R3 + R4

R_total = 78 Ω + 35 Ω + 60 Ω + 42 Ω

R_total = 215 Ω

We know that the total current (I_total) in the circuit is given by Ohm's Law:

I_total = V / R_total

where V is the voltage provided by the battery (6 V) and R_total is the total resistance.

Substituting the given values:

I_total = 6 V / 215 Ω

I_total ≈ 0.028 A

Therefore, the total current in the circuit is approximately 0.028 amperes (A).

To know more about ohm's law refer here: https://brainly.com/question/1247379#

#SPJ11

Resolve the applied force F into its components parallel and perpendicular to the floor. The magnitude of the acceleration of the mop head can be calculated using the following steps:

F_parallel = F * cos(θ)

F_perpendicular = F * sin(θ)

Calculate the frictional force acting on the mop head.

f_friction = μ * F_perpendicular

Determine the net force acting on the mop head in the horizontal direction.

F_net = F_parallel - f_friction

Use Newton's second law (F_net = m * a) to calculate the acceleration.

a = F_net / m

Substituting the given values into the equations:

F_parallel = 41.9 N * cos(49.3°) = 41.9 N * 0.649 = 27.171 N

F_perpendicular = 41.9 N * sin(49.3°) = 41.9 N * 0.761 = 31.8489 N

f_friction = 0.330 * 31.8489 N = 10.5113 N

F_net = 27.171 N - 10.5113 N = 16.6597 N

a = 16.6597 N / 2.35 kg = 7.0834 m/s²

Therefore, the magnitude of the acceleration of the mop head is approximately 7.08 m/s².

Summary: a = 7.08 m/s²

To learn more about acceleration click here.

brainly.com/question/31946450

#SPJ11

According to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).

To calculate the time dilation experienced by the passenger on the moving train, we can use the time dilation formula:

Δt' = Δt / γ

Where:

Δt' is the time measured by the passenger on the train

Δt is the time measured by an observer at rest (you, in this case)

γ is the Lorentz factor, which is given by γ = 1 / √(1 - v²/c²), where v is the velocity of the train and c is the speed of light

Given:

v = (4/5)c (velocity of the train)

Δt' = 3/5 s (time measured by the passenger)

First, we can calculate the Lorentz factor γ:

γ = 1 / √(1 - v²/c²)

γ = 1 / √(1 - (4/5)²)

γ = 1 / √(1 - 16/25)

γ = 1 / √(9/25)

γ = 1 / (3/5)

γ = 5/3

Now, we can calculate the time measured by you, the observer:

Δt = Δt' / γ

Δt = (3/5 s) / (5/3)

Δt = (3/5)(3/5)

Δt = 9/25 s

Therefore, according to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).

Read more about Time Dilation here: https://brainly.com/question/3747871

#SPJ11

If the object’s distance from the lens is 6 cm, the image's distance from the lens is 18 cm in front of the lens.

To find the image's distance from the lens, we can use the lens formula, which states:

1/f = 1/v - 1/u

where:

f is the focal length of the lens,

v is the image distance from the lens,

u is the object distance from the lens.

Height of the object (h₁) = 4 cm (positive, as it is above the principal axis)

Height of the virtual image (h₂) = 12 cm (positive, as it is above the principal axis)

Object distance (u) = 6 cm (positive, as the object is in front of the lens)

Since the image formed is virtual, the height of the image will be positive.

We can use the magnification formula to relate the object and image heights:

magnification (m) = h₂/h₁

= -v/u

Rearranging the magnification formula, we have:

v = -(h₂/h₁) * u

Substituting the given values, we get:

v = -(12/4) * 6

v = -3 * 6

v = -18 cm

The negative sign indicates that the image is formed on the same side of the lens as the object.

Learn more about distance -

brainly.com/question/26550516

#SPJ11

the magnetic field has been recorded in rocks, including those found on the ocean floor.

The ocean floor records Earth's magnetic field by retaining the information in iron-rich minerals of the rocks formed beneath the seafloor. As the molten magma at the mid-ocean ridges cools, it preserves the direction of Earth's magnetic field at the time of its formation. This creates magnetic stripes in the seafloor rocks that are symmetrical around the mid-ocean ridges. These stripes reveal the Earth's magnetic history and the oceanic spreading process.

How is the ocean floor a recorder of the earth's magnetic field?

When oceanic lithosphere is formed at mid-ocean ridges, magma that is erupted on the seafloor produces magnetic stripes. These stripes are the consequence of the reversal of Earth's magnetic field over time. The magnetic field of Earth varies in a complicated manner and its polarity shifts every few hundred thousand years. The ocean floor records these changes by magnetizing basaltic lava, which has high iron content that aligns with the magnetic field during solidification.

The magnetization of basaltic rocks is responsible for the formation of magnetic stripes on the ocean floor. Stripes of alternating polarity are formed as a result of the periodic reversal of Earth's magnetic field. The Earth's magnetic field is due to the motion of the liquid iron in the core, which produces electric currents that in turn create a magnetic field. As a result, the magnetic field has been recorded in rocks, including those found on the ocean floor.

Learn more about ocean  and  magnetic field https://brainly.com/question/14411049

#SPJ11

The speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.

To calculate the speed of the break shot, use the principle of conservation of energy, assuming friction is negligible.

Given:

Height of the table surface from the floor (h) = 0.710 m

Distance from the table's edge to where the ball landed (d) = 4.15 m

World speed record for the break shot = 32 mph (about 14.3 m/s)

To calculate the speed of the break shot (vo), equate the initial kinetic energy of the ball with the potential energy at its maximum height:

(1/2)mv₀² = mgh

where m = mass of the ball, g = acceleration due to gravity (9.8 m/s²), and h = height of the table surface.

Solving for v₀:

v₀ = √(2gh)

Substituting the given values:

v₀ = √(2 × 9.8 × 0.710) m/s

v₀ ≈ 9.80 m/s

So, the speed of the break shot (vo) is approximately 9.80 m/s.

Since friction is negligible, the horizontal component of the velocity remains constant throughout the motion. Therefore:

v₁ = d / t

where t = time taken by the ball to reach the ground.

To find t, use the equation of motion:

h = (1/2)gt²

Solving for t:

t = √(2h / g)

Substituting the given values:

t = √(2 × .710 / 9.8) s

t ≈ 0.376 s

Substituting the values of d and t, now calculate v₁:

v₁ = 4.15 m / 0.376 s

v₁ ≈ 11.02 m/s

Therefore, the speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.

Find out more on speed here: https://brainly.com/question/13943409

#SPJ4

Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.

The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.

In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.

To know more about electric visit:

https://brainly.com/question/31173598

#SPJ11

The magnetic field B can be determined by analyzing the forces acting on the wire in different orientations. By considering the given forces and orientations, the magnetic field B is determined to be B = 3.6i - 3.6j + 0k T.

When the wire lies along the +x axis, a magnetic force F₁ = +9N₁ acts on the wire. Since the wire carries a current in the +x direction, we can use the right-hand rule to determine the direction of the magnetic field B. The force F₁ is directed in the -y direction, perpendicular to both the current and magnetic field, indicating that the magnetic field must point in the +z direction.

When the wire lies along the +y axis, a magnetic force F₂ = -9N₁ acts on the wire. Similarly, using the right-hand rule, we find that the force F₂ is directed in the -x direction. This implies that the magnetic field must be in the +z direction to satisfy the right-hand rule.

Since the magnetic field B has a z-component but no x- or y-components, we can express it as B = Bi + Bj + Bk. The forces F₁ and F₂ allow us to determine the magnitudes of the x- and y-components of B.

For the wire along the +x axis, the force F₁ is given by F₁ = qvB, where q is the charge, v is the velocity of charge carriers, and B is the magnetic field. The magnitude of F₁ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₁ is given by 9N₁ = 5A * B, which leads to B = 1.8 N₁/A.

Similarly, for the wire along the +y axis, the force F₂ is given by F₂ = qvB, where q, v, and B are the same as before. The magnitude of F₂ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₂ is given by 9N₁ = 5A * B, which leads to B = -1.8 N₁/A.

Combining the x- and y-components, we find that B = 1.8i - 1.8j + 0k N₁/A. Finally, since 1 T = 1 N₁/A·m, we can convert N₁/A to T and obtain the magnetic field B = 3.6i - 3.6j + 0k T.

Learn more about Magnetic Field here:

brainly.com/question/14848188

#SPJ11

The magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at:

a) point (0,8) m is approximately 3.75 × 10⁻⁹ T,

b) point (10,0) m is approximately 3 × 10⁻⁹ T and

c) point (10,8) m is approximately 2.68 × 10⁻⁹ T.

To find the magnetic field created by the wire at the given points, we can use the formula for the magnetic field produced by a straight current-carrying wire.

The formula is given by:

B = (μ₀ × I) / (2πr),

where

B is the magnetic field,

μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),

I is the current, and

r is the distance from the wire.

The wire lies along the x-axis, and the point of interest is above the wire. The distance from the wire to the point is 8 meters. Substituting the values into the formula:

B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 8 m),

B = (0.6 × 10⁻⁷ T·m) / (16 m),

B = 3.75 × 10⁻⁹ T.

Therefore, the magnetic field created by the wire at point (0,8) meters is approximately 3.75 × 10⁻⁹ T.

The wire lies along the x-axis, and the point of interest is to the right of the wire. The distance from the wire to the point is 10 meters. Substituting the values into the formula:

B = (4π × 10⁻⁷ T·m/A ×0.6 A) / (2π × 10 m),

B = (0.6 * 10⁻⁷ T·m) / (20 m),

B = 3 × 10⁻⁹ T.

Therefore, the magnetic field created by the wire at point (10,0) meters is approximately 3 × 10⁻⁹ T.

The wire lies along the x-axis, and the point of interest is above and to the right of the wire. The distance from the wire to the point is given by the diagonal distance of a right triangle with sides 8 meters and 10 meters. Using the Pythagorean theorem, we can find the distance:

r = √(8² + 10²) = √(64 + 100) = √164 = 4√41 meters.

Substituting the values into the formula:

B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 4√41 m),

B = (0.6 × 10⁻⁷ T·m) / (8√41 m),

B ≈ 2.68 × 10⁻⁹ T.

Therefore, the magnetic field created by the wire at point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.

Hence, the magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at a) point (0,8) meters is approximately 3.75 × 10⁻⁹ T, b) point (10,0) meters is approximately 3 × 10⁻⁹ T and c) point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.

Learn more about Magnetic field from the given link:

https://brainly.com/question/30830460

#SPJ11

The diameter of the wire is 0.47 mm.

The resistance of a wire is given by the following formula

R = ρl/A`

here:

* R is the resistance in ohms

* ρ is the resistivity in Ω⋅m

* l is the length in meters

* A is the cross-sectional area in meters^2

The cross-sectional area of a circular wire is given by the following formula:

A = πr^2

where:

* r is the radius in meter

Plugging in the known values, we get:

4.40 Ω = 1.59 × 10^-6 Ω⋅m * 23.0 m / πr^2

r^2 = (4.40 Ω * π) / (1.59 × 10^-6 Ω⋅m * 23.0 m)

r = 0.0089 m

d = 2 * r = 0.0178 m = 0.47 mm

The diameter of the wire is 0.47 mm.

Learn more about diameter with the given link,

https://brainly.com/question/28162977

#SPJ11

The maximum potential energy of the system is 0.5 J.

The given frequency, f = 5 Hz. The given amplitude, A = 20 cm = 0.2 m

The mass of the object, m = 0.250 kg

We can find the maximum potential energy of the system using the following formula: Umax = (1/2)kA²where k is the spring constant.

We know that the frequency of oscillation can be expressed as: f = (1/2π)√(k/m)

Rearranging the above formula, we get: k = (4π²m)/T² where T is the time period of oscillation.

We know that T = 1/f. Substituting this value in the above equation, we get:

k = (4π²m)/(1/f²)

k = 4π²mf².

Using this value of k, we can now find Umax.

Umax = (1/2)kA²

Substituting the given values, we get:

Umax = (1/2) x 4π² x 0.250 x (5)² x (0.2)²

Umax = 0.5 J

Therefore, the maximum potential energy of the system is 0.5 J.

Learn more about Potential energy

https://brainly.com/question/9349250

#SPJ11

If a 1m rod is travelling in region where there is a uniform magnetic field of 0.1T, going into the page, then the current circulating in the rod is 0.02A and the direction of the current is in a clockwise direction.

We have been given the following information :

Velocity of the rod = 4m/s

Magnetic field = 0.1T

Resistance of the resistor = 20Ω

Let's use the formula : V = I * R to find the current through the rod.

Current flowing in the rod, I = V/R ... equation (1)

The potential difference created in the rod due to the motion of the rod in the magnetic field, V = B*L*V ... equation (2)

where

B is the magnetic field

L is the length of the rod

V is the velocity of the rod

Perpendicular distance between the rod and the magnetic field, L = 1m

Using equation (2), V = 0.1T * 1m * 4m/s = 0.4V

Substituting this value in equation (1),

I = V/R = 0.4V/20Ω = 0.02A

So, the current circulating in the rod is 0.02A

Direction of the current is as follows: the rod is moving inwards, the magnetic field is going into the page.

By Fleming's right-hand rule, the direction of the current is in a clockwise direction.

Thus, the current circulating in the rod is 0.02A and the direction of the current is in a clockwise direction.

To learn more about magnetic field :

https://brainly.com/question/7802337

#SPJ11

(18 / 1000) / [(3.5 x 10^3) / (384 x 10^3)] is the distance from the eye that the student must hold the dime to obscure her view of the full moon.

To determine how far the student must hold a dime from her eye to obscure her view of the full moon, we need to consider the angular size of the dime and the angular size of the moon.

The angular size of an object is the angle it subtends at the eye. We can calculate the angular size using the formula:

Angular size = Actual size / Distance

Let's calculate the angular size of the dime first. The diameter of the dime is given as 18 mm. Since we want the angular size in radians, we need to convert the diameter to meters by dividing by 1000:

Dime's angular size = (18 / 1000) / Distance from the eye

Now, let's calculate the angular size of the moon. The diameter of the moon is given as 3.5 x 103 km, and it is located 384 x 103 km away:

Moon's angular size = (3.5 x 103 km) / (384 x 103 km)

To obscure the view of the full moon, the angular size of the dime must be equal to or greater than the angular size of the moon. Therefore, we can set up the following equation:

(18 / 1000) / Distance from the eye = (3.5 x 103 km) / (384 x 103 km)

Simplifying the equation, we find:

Distance from the eye = (18 / 1000) / [(3.5 x 103) / (384 x 103)]

After performing the calculations, we will obtain the distance from the eye that the student must hold the dime to obscure her view of the full moon.

Learn more about full moon from below link

brainly.com/question/9622304

#SPJ11

The potential difference between the capacitor plates will remain the same, which is 400 V.

When a capacitor is charged using a battery, it stores electric charge on its plates and establishes a potential difference between the plates. In this case, the capacitor was initially charged using a 400 V battery. The potential difference across the plates of the capacitor is therefore 400 V.

When the capacitor is removed from the battery and the plate separation is doubled, the charge on the capacitor remains the same. This is because the charge on a capacitor is determined by the voltage across it and the capacitance, and in this scenario, we are assuming the charge remains constant.

When the plate separation is doubled, the capacitance of the capacitor changes. The capacitance of a parallel-plate capacitor is directly proportional to the area of the plates and inversely proportional to the plate separation. Doubling the plate separation halves the capacitance.

Now, let's consider the equation for a capacitor:

C = Q/V

where C is the capacitance, Q is the charge on the capacitor, and V is the potential difference across the capacitor plates.

Since we are assuming the charge on the capacitor remains constant, the equation becomes:

C1/V1 = C2/V2

where C1 and V1 are the initial capacitance and potential difference, and C2 and V2 are the final capacitance and potential difference.

As we know that the charge remains the same, the initial and final capacitances are related by:

C2 = C1/2

Substituting the values into the equation, we get:

C1/V1 = (C1/2)/(V2)

Simplifying, we find:

V2 = 2V1

So, the potential difference across the plates of the capacitor after doubling the plate separation is twice the initial potential difference. Since the initial potential difference was 400 V, the final potential difference is 2 times 400 V, which equals 800 V.

Therefore, the correct answer is D. 800 V.

To learn more about  potential difference  click here:

brainly.com/question/23716417

#SPJ11

The value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².

Angular displacement, Δθ = 13.9°

Time interval, Δt = 55 ms = 0.055 s

To convert the angular displacement from degrees to radians:

θ (in radians) = Δθ × (π/180)

θ = 13.9° × (π/180) ≈ 0.2422 radians

Now we can calculate the angular acceleration:

α = Δθ / Δt

α = 0.2422 radians / 0.055 s ≈ 4.4036 rad/s²

Therefore, the value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².

The angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s². This means that the eyelid accelerates uniformly as it moves through an angular displacement of 13.9° during a time interval of 55 ms.

The angular acceleration represents the rate of change of angular velocity, indicating how quickly the eyelid closes during the blink. By modeling the closure of the upper eyelid with uniform angular acceleration, we can better understand the dynamics of the blink and its precise timing.

Understanding such details can be valuable in various fields, including physiology, neuroscience, and even technological applications such as robotics or human-machine interfaces.

Learn more about acceleration at: https://brainly.com/question/460763

#SPJ11

The mass of the box is approximately 55.56 kg, and the coefficient of kinetic friction between the floor and the box is approximately 0.117.

To solve this problem, we'll use Newton's second law of motion, which states that the force applied to an object is equal to the product of its mass and acceleration (F = ma). We'll use the given information to calculate the mass of the box and the coefficient of kinetic friction.

(a) Calculating the mass of the box:

Using the first scenario where Mary applies a force of 25 N with an acceleration of 0.45 m/s²:

F₁ = 25 N

a₁ = 0.45 m/s²

We can rearrange Newton's second law to solve for mass (m):

F₁ = ma₁

25 N = m × 0.45 m/s²

m = 25 N / 0.45 m/s²

m ≈ 55.56 kg

Therefore, the mass of the box is approximately 55.56 kg.

(b) Calculating the coefficient of kinetic friction:

In the second scenario, Mary applies a force of 86 N, and the acceleration of the box changes to 0.65 m/s². Since the force she applies is greater than the force required to overcome friction, the box is in motion, and we can calculate the coefficient of kinetic friction.

Using Newton's second law again, we'll consider the net force acting on the box:

F_net = F_applied - F_friction

The applied force (F_applied) is 86 N, and the mass of the box (m) is 55.56 kg. We'll assume the coefficient of kinetic friction is represented by μ.

F_friction = μ × m × g

Where g is the acceleration due to gravity (approximately 9.81 m/s²).

F_net = m × a₂

86 N - μ × m × g = m × 0.65 m/s²

Simplifying the equation:

μ × m × g = 86 N - m × 0.65 m/s²

μ × g = (86 N/m - 0.65 m/s²)

Substituting the values:

μ × 9.81 m/s² = (86 N / 55.56 kg - 0.65 m/s²)

Solving for μ:

μ ≈ (86 N / 55.56 kg - 0.65 m/s²) / 9.81 m/s²

μ ≈ 0.117

Therefore, the coefficient of kinetic friction between the floor and the box is approximately 0.117.

To know more about kinetic friction refer to-

https://brainly.com/question/30886698

#SPJ11

(i) To determine the value of the product KΦ, we can use the formula below:

Full-load developed torque = (KΦ * armature current * field flux) / 2Φ

= (2 * Full-load developed torque) / (Armature current * field flux)

Given, Full-load developed torque = 22 Nm, Armature current = I, a = Full-load armature current = ?

Field flux = φ = (Φ * field current) / Number of poles

Field current = If = 1.0 A, Number of poles = P = ?

As the number of poles is not given, we cannot determine the field flux. Thus, we can only calculate KΦ when the number of poles is known. In order to find the full-load armature current, we can use the formula below:

Full-load developed torque = (KΦ * armature current * field flux) / 2Armature current

= (2 × Full-load developed torque) / (KΦ * field flux)

Given, Full-load developed torque = 22 Nm, Armature resistance = R, a = 1 Ω, Armature voltage = E, a = 280 V, Field current = If = 1.0 A, Number of poles = P = ?

Field flux = φ = (Φ * field current) / Number of poles

No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?

Back emf at no-load = Eb = Vt = Ea

Full-load armature current = ?

We know that, Vt = Eb + Ia RaVt = Eb + Ia Ra

=> 280 = Eb + Ia * 1.0

=> Eb = 280 - Ia

Full-load speed (Nl) can be determined using the formula below:

Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl

=>  (Ea - Ia Ra) / KΦ

Nl = (280 - Ia * 1.0) / KΦ

Substituting the value of KΦ from the above equation in the formula of full-load developed torque, we can determine the full-load armature current.

Full-load developed torque = (KΦ * armature current * field flux) / 2

=> armature current = (2 * Full-load developed torque) / (KΦ * field flux)

Substitute the given values in the above equation to calculate the value of full-load armature current.

(ii) Given, full-load developed torque = 22 Nm, Armature current = ?,

Field flux = φ = (Φ * field current) / Number of poles

Field current = If = 1.0 A, Number of poles = P = ?

No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?

We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl

=>  (280 - Ia * 1.0) / KΦ

We need to calculate the value of Kphi to determine the full-load speed.

(iii) Given, full-load developed torque = 22 Nm, Armature current = Ia = Full-load armature current

Field flux = φ = (Φ * field current) / Number of poles

Number of poles = P = ?

Armature resistance = Ra = 1.0 Ω, Armature voltage = Ea = 280 V, Field current = If = 0.9 A,

Full-load speed = Nl = ?

We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl

=> (280 - Ia * 1.0) / KΦ

For this, we need to calculate the value of KΦ first. Since we know that the developed torque is unchanged, we can write:

T ∝ φ

If T ∝ φ, then T / φ = k

If k is constant, then k = T / φ

We can use the above formula to calculate k. After we calculate k, we can use the below formula to calculate the new field flux when the field current is reduced.

New field flux = (Φ * field current) / Number of poles = k / field current

Once we determine the new field flux, we can substitute it in the formula of full-load speed (Nl) = (Ea - Ia Ra) / KΦ to determine the new full-load speed.

Learn more about "Field Flux" refer to the link : https://brainly.com/question/10736183

#SPJ11

Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.

The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.

Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.

The following are some points to keep in mind during the Millikan Oil Drop Experiment:

Oil droplets are produced using an atomizer by spraying oil droplets into a container.

When oil droplets reach the top, they are visible through a microscope.

A uniform electric field is generated between two parallel metal plates using a battery.

The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets. 

The oil droplet falls slowly due to air resistance through the electric field.

As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.

Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.

To know more about fundamental charge of the electron, visit:

https://brainly.com/question/32913598

#SPJ11

When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.

Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.

The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.

When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.

Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.

Learn more about Electric field, refer to the link:

https://brainly.com/question/11482745

#SPJ4

The magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.

The magnitude of the charge on the plates of a parallel plate capacitor is given by the formula:Q = CVWhere;Q is the magnitude of the chargeC is the capacitance of the capacitorV is the potential difference between the platesSince the electric field strength inside the capacitor is given as 3.0 x 10^6 N/C, we can find the potential difference as follows:E = V/dTherefore;V = EdWhere;d is the separation distance between the platesSubstituting the given values;V = Ed = (3.0 x 10^6 N/C) x (1.6 x 10^-3 m) = 4.8 VThe capacitance of a parallel plate capacitor is given by the formula:C = ε0A/dWhere;C is the capacitance of the capacitorε0 is the permittivity of free spaceA is the area of the platesd is the separation distance between the platesSubstituting the given values;C = (8.85 x 10^-12 F/m)(π(7.6 x 10^-2 m/2)^2)/(1.6 x 10^-3 m) = 4.69 x 10^-11 FThus, the magnitude of the charge on the plates is given by;Q = CV= (4.69 x 10^-11 F) (4.8 V)= 2.25 x 10^-10 CTherefore, the magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.

Learn more about electric field :

https://brainly.com/question/11482745

#SPJ11

The terminal speed of the sphere is 17.71 m/s. It would have to be dropped from a height of 86.77 m to reach this speed if it fell without air resistance.

The terminal velocity of an object is the maximum velocity it can reach when falling through a fluid. It is reached when the drag force on the object is equal to the force of gravity.

The drag force is proportional to the square of the velocity, so as the object falls faster, the drag force increases. Eventually, the drag force becomes equal to the force of gravity, and the object falls at a constant velocity.

The terminal velocity of the sphere can be calculated using the following formula:

v_t = sqrt((2 * m * g) / (C_d * A * rho_f))

where:

v_t is the terminal velocity in meters per second

m is the mass of the sphere in kilograms

g is the acceleration due to gravity (9.8 m/s^2)

C_d is the drag coefficient (0.500 in this case)

A is the cross-sectional area of the sphere in meters^2

rho_f is the density of the fluid (1.20 kg/m^3 in this case)

The mass of the sphere can be calculated using the following formula:

m = (4/3) * pi * r^3 * rho

where:

m is the mass of the sphere in kilograms

pi is a mathematical constant (3.14)

r is the radius of the sphere in meters

rho is the density of the sphere in kilograms per cubic meter

The cross-sectional area of the sphere can be calculated using the following formula:

A = pi * r^2

Plugging in the known values, we get the following terminal velocity for the sphere:

v_t = sqrt((2 * (4/3) * pi * (8.00 cm)^3 * (1.14 g/cm^3) * 9.8 m/s^2) / (0.500 * pi * (8.00 cm)^2 * 1.20 kg/m^3)) = 17.71 m/s

The height from which the sphere would have to be dropped to reach this speed if it fell without air resistance can be calculated using the following formula:

h = (v_t^2 * 2 / g)

where:

h is the height in meters

v_t is the terminal velocity in meters per second

g is the acceleration due to gravity (9.8 m/s^2)

Plugging in the known values, we get the following height:

h = (17.71 m/s)^2 * 2 / 9.8 m/s^2 = 86.77 m

To learn more about terminal speed click here: brainly.com/question/30556510

#SPJ11

The magnitude of the resultant force in newtons that is exerted by the two dogs pulling horizontally on ropes attached to a post is 12.6 N.

The sum of the two vectors gives the resultant vector. The formula to find the resultant force, R is R = √(A² + B² + 2AB cosθ).

Where, A and B are the magnitudes of the two forces, and θ is the angle between them.

The magnitude of the resultant force is 12.6 N. Let's derive this answer.

Given;

The force exerted by Dog A, A = 11.1 N

The force exerted by Dog B, B = 5.7 N

The angle between the two ropes, θ = 36.2°

Now we can use the formula to find the resultant force, R = √(A² + B² + 2AB cosθ).

Substituting the given values,

R = √(11.1² + 5.7² + 2(11.1)(5.7) cos36.2°)

R = √(123.21 + 32.49 + 2(11.1)(5.7) × 0.809)

R = √(155.7)R = 12.6 N

Therefore, the magnitude of the resultant force is 12.6 N.

Learn more about the resultant vector: https://brainly.com/question/28188107

#SPJ11

Part (a) The magnitude of the acceleration of the rocket is 3.52 m/s².

Part (b) The kinetic energy before the thrusters are fired is 1.62 x 10⁶ J, and after the thrusters are fired, it is 3.56 x 10⁶ J.

To calculate the magnitude of the acceleration, we can use the formula of constant acceleration: Vf = vi + a*t, where Vf is the final velocity, vi is the initial velocity, a is the acceleration, and t is the time. Rearranging the formula to solve for acceleration, we have a = (Vf - vi) / t.

Substituting the given values, we get a = (31.8 m/s - (-25.7 m/s)) / 18.1 s = 57.5 m/s / 18.1 s ≈ 3.52 m/s².

To calculate the kinetic energy before the thrusters are fired, we use the formula: KE = (1/2) * M * (vi)². Substituting the given values, we get KE = (1/2) * 2000 kg * (-25.7 m/s)² ≈ 1.62 x 10⁶ J.

Similarly, the kinetic energy after the thrusters are fired is KE = (1/2) * 2000 kg * (31.8 m/s)² ≈ 3.56 x 10⁶ J.

learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.

(a) The momentum of an electron with a total energy of 2.38 times its rest energy:

E² = (pc)² + (mc²)²

Given that the total energy is 2.38 times the rest energy, we have:

E = 2.38mc²

(2.38mc²)² = (pc)² + (mc²)²

5.6644m²c⁴ = p²c² + m²⁴

4.6644m²c⁴ = p²c²

4.6644m²c² = p²

Taking the square root of both sides:

pc = √(4.6644m²c²)

p = √(4.6644m²c²) / c

p = √4.6644m²

p = 2.16m

The momentum of the electron is 2.16 times its rest momentum.

(b)

To calculate the wavelength of a proton with a speed of 48 km/s:

λ = h / p

The momentum of the proton can be calculated using the formula:

p = mv

p = (1.6726219 × 10⁻²⁷) × (48,000)

p = 8.0333752 × 10⁻²³ kg·m/s

The wavelength using the de Broglie wavelength formula:

λ = h / p

λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )

λ ≈ 8.2462 × 10⁻¹²

λ ≈ 8246 pm

The wavelength of the proton is 8246 picometers.

To know more about the wavelength:

https://brainly.com/question/32900586

#SPJ4

The radius of the central sheave necessary to make the fall time exactly 3 s is approximately 345.622 mm.

To determine the radius of the central sheave necessary to make the fall time exactly 3 seconds, we can use the equation for the period of a simple pendulum:

T = 2π√(L/g)

where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.

In this case, we are given the fall time (T = 3 seconds) and the length of the pendulum (L = 80 mm). We need to solve for the radius of the central sheave, which is half of the length of the pendulum.

Using the equation for the period of a simple pendulum, we can rearrange it to solve for L:

L = (T/(2π))^2 * g

Substituting the given values:

L = (3/(2π))^2 * 9.8 m/s^2 (approximating g as 9.8 m/s^2)

L ≈ 0.737 m

Since the length of the pendulum is twice the radius of the central sheave, we can calculate the radius:

Radius = L/2 ≈ 0.737/2 ≈ 0.3685 m = 368.5 mm

Therefore, the radius of the central sheave necessary to make the fall time exactly 3 seconds is approximately 345.622 mm (rounded to three decimal places).

To learn more about sheave, click here:

https://brainly.com/question/8901975

#SPJ11

Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact

Two solid disks of equal masses, which were initially separated with some distance between them, are used as clutches. The two disks have the same radius (R = 0.45m).

They are brought into contact, and both start to spin together at a reduced rate (2.67 rad/s) within 1.6 seconds. Following are the solutions to the asked questions:a) Initial velocity of the first disk

We can determine the initial velocity of the first disk by using the equation of motion. This is given as:

v = u + at

Where,u is the initial velocity of the first disk,a is the acceleration of the disk,t is the time for which the disks are in contact,and v is the final velocity of the disk. Here, the final velocity of the disk is given as:

v = 2.67 rad/s

The disks started from rest and continued to spin with 2.67 rad/s after they were brought into contact.

Thus, the initial velocity of the disk can be found as follows:

u = v - atu

= 2.67 - (0.25 × 1.6)

u = 2.27 rad/s

Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact

The acceleration of the disks can be found as follows:

α = (ωf - ωi) / t

Where,ωi is the initial angular velocity,ωf is the final angular velocity, andt is the time for which the disks are in contact. Here,

ωi = 0,

ωf = 2.67 rad/s,and

t = 1.6 s.

Substituting these values, we have:

α = (2.67 - 0) / 1.6α

= 1.67 rad/s²

Therefore, the acceleration of the disk together when they came in contact is 1.67 rad/s².c) Does the value of the masses matter for this problem?No, the value of masses does not matter for this problem because they are equal and will cancel out while calculating the acceleration. So the value of mass does not have any effect on the given problem.

To know more about disk visit;

brainly.com/question/27897748

#SPJ11

(a) The work done by a force is given by the equation:

Work = Force * Distance * cos(theta)

In this case, the force applied is 150 N and the distance moved is 5.50 m. Since the force is applied horizontally, the angle theta between the force and the displacement is 0 degrees (cos(0) = 1).

So the work done by the 150 N force is:

Work = 150 N * 5.50 m * cos(0) = 825 J

Therefore, the work done by the 150 N force is 825 Joules (J).

(b) The work done by the 150 N force is equal to the work done against friction. The work done against friction can be calculated using the equation:

Work = Force of friction * Distance

Since the block moves at a constant speed, the net force acting on it is zero. Therefore, the force of friction must be equal in magnitude and opposite in direction to the applied force of 150 N.

So the force of friction is 150 N.

The coefficient of kinetic friction (μk) can be determined using the equation:

Force of friction = μk * Normal force

The normal force (N) is equal to the weight of the block, which is given by:

Normal force = mass * gravity

where gravity is approximately 9.8 m/s².

Substituting the values:

150 N = μk * (47.5 kg * 9.8 m/s²)

Solving for μk:

μk = 150 N / (47.5 kg * 9.8 m/s²) ≈ 0.322

Therefore, the coefficient of kinetic friction between the block and the floor is approximately 0.322.

To know more about work done click this link -

brainly.com/question/32263955

#SPJ11

The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. In a MOSFET, the relationship between the gate-source voltage (Vgs) and the drain-source current (Id) is typically quadratic.

BJT (Bipolar Junction Transistor): The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. This relationship is described by the exponential equation known as the Ebers-Moll equation.

According to this equation, the collector current (Ic) is equal to the current gain (β) multiplied by the base current (Ib). Mathematically,

it can be expressed as [tex]I_c = \beta \times I_b.[/tex]

The current gain (β) is a parameter specific to the transistor and is typically greater than 1. Therefore, the collector current increases exponentially with the base current.

MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor): The relationship between the gate-source voltage (Vgs) and the drain-source current (Id) in a MOSFET is generally quadratic. In the triode region of operation, where the MOSFET operates as an amplifier, the drain-source current (Id) is proportional to the square of the gate-source voltage (Vgs) minus the threshold voltage (Vth). Mathematically,

it can be expressed as[tex]I_d = k \times (Vgs - Vth)^2,[/tex]

where k is a parameter related to the transistor's characteristics. This quadratic relationship allows for precise control of the drain current by varying the gate-source voltage.

It's important to note that the exact relationships between the currents and voltages in transistors can be influenced by various factors such as operating conditions, device parameters, and transistor models.

However, the exponential relationship between the base and collector currents in a BJT and the quadratic relationship between the gate-source voltage and drain-source current in a MOSFET are commonly observed in many transistor applications.

To learn more about Bipolar Junction Transistor here brainly.com/question/29559044

#SPJ11

Let's assume your body is mostly composed of hydrogen atoms, which have an atomic number of 1. Therefore, each hydrogen atom has 1 proton.

The order of magnitude of the number of protons in your body can be estimated by considering the number of atoms in your body and the number of protons in each atom.

First, let's consider the number of atoms in your body. The average adult human body contains approximately 7 × 10^27 atoms.

Next, we need to determine the number of protons in each atom. Since each atom has a nucleus at its center, and the nucleus contains protons, we can use the atomic number of an element to determine the number of protons in its nucleus.

For simplicity, let's assume your body is mostly composed of hydrogen atoms, which have an atomic number of 1. Therefore, each hydrogen atom has 1 proton.

Considering these values, we can estimate the number of protons in your body. If we multiply the number of atoms (7 × 10^27) by the number of protons in each atom (1), we find that the order of magnitude of the number of protons in your body is around 7 × 10^27.

It's important to note that this estimation assumes a simplified scenario and the actual number of protons in your body may vary depending on the specific composition of elements.

to learn more about proton

https://brainly.com/question/12535409

#SPJ11

The statement "Atoms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms

Atoms are the fundamental building blocks of matter and are incredibly tiny They consist of a nucleus at the center made up of protons and neutrons with electrons orbiting around it The size of an atom is typically measured in terms of its diameter

They are said to be smallest pasrticles that make up matter. Hence we have to conclude that toms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms

Read more on atoms here https://brainly.com/question/17545314

#SPJ4