For QUESTION 25:The correct answer is:D. amplitude modulation.Linear modulation typically refers to amplitude modulation .
In AM, the amplitude of the carrier signal is varied in proportion to the modulating signal, which carries the information. The resulting modulated signal contains both the carrier and the modulating signal components.Option A (phase modulation) and Option C (non-linear modulation) are incorrect because linear modulation specifically refers to modulation techniques where the relationship between the modulating signal and the carrier signal is linear. Phase modulation can be a form of linear modulation, but it is not the only type.Option B (Two of the given options) is also incorrect because it is a general statement that does not provide a specific answer to which options are true.For QUESTION 26:The correct answer is:B. The atan function typically gives out a number.The atan function, also known as the arctangent function or inverse tangent function, typically gives out a number. It is used to calculate the angle whose tangent is a given number or ratio. The output of the atan function is an angle in radians.Option A (The tan function typically gives out an angle) is incorrect because the tan function gives the tangent of an angle, not an angle itself.Option C (The Laplace transform and Fourier transform resemble certain similarities) is incorrect because the Laplace transform and Fourier transform are different mathematical transforms used for different purposes. While they share some similarities, they have distinct properties and applications.Option D (Phase becomes important when distortion is not discussed) is also incorrect because phase is an important aspect in signal processing and communication systems, even when distortion is not discussed. Phase information is crucial in understanding signal characteristics, modulation, demodulation, and many other aspects of signal analysis.
Learn more about modulation here:
https://brainly.com/question/28520208
#SPJ11
An engineer is going to redesign an ejection seat for an airplane. The seat was designed for pilots weighing between lb and lb. The new population of pilots has normally distributed weights with a mean of and a standard deviation of.
The engineer is redesigning an ejection seat for pilots weighing between lb and lb. The new population of pilots has weights that are normally distributed with a mean of and a standard deviation of. To ensure that the redesigned seat can accommodate the majority of pilots, the engineer needs to consider the weight range that covers a significant portion of the population.
The engineer can use the standard deviation to determine the range of weights that covers a specific percentage of the population. For example, within one standard deviation of the mean, approximately 68% of the population will fall. Within two standard deviations, approximately 95% will fall, and within three standard deviations, approximately 99.7% will fall.
By calculating the range of weights within a certain number of standard deviations from the mean, the engineer can determine the weight range that covers a desired percentage of the pilot population. This information will help in redesigning the ejection seat to accommodate the majority of pilots.
To know more about redesigning visit:
https://brainly.com/question/13104616
#SPJ11
Solve Poisson equation 12V = -Ps/ɛ, 0 SX S5, 0 Sy s5, assuming that there are insulating gaps at the corners of the rectangular region and subject to boundary conditions u(0,y) = 0, u(5, y) = sin(y) u(x,0) = x, u(x,5) = -3 = for er = - 9 and = {(v=5), Ps ș(y – 5)x [nC/m²] 15XS 4, 1 Sy s4 elsewhere
The solution to the given Poisson equation is u(x, y) = -0.4x^2 + sin(y).
To solve the Poisson equation 12V = -Ps/ɛ in the specified rectangular region, we apply the method of separation of variables. We assume the solution to be a product of two functions, u(x, y) = X(x)Y(y). Substituting this into the Poisson equation, we obtain X''(x)Y(y) + X(x)Y''(y) = -Ps/ɛ.
Since the left-hand side depends on x and the right-hand side depends on y, both sides must be equal to a constant, which we'll call -λ^2. This gives us two ordinary differential equations: X''(x) = -λ^2X(x) and Y''(y) = λ^2Y(y).
Solving the first equation, we find that X(x) = A*cos(λx) + B*sin(λx), where A and B are constants determined by the boundary conditions u(0, y) = 0 and u(5, y) = sin(y).
Next, solving the second equation, we find that Y(y) = C*cosh(λy) + D*sinh(λy), where C and D are constants determined by the boundary conditions u(x, 0) = x and u(x, 5) = -3.
Applying the boundary conditions, we find that A = 0, B = 1, C = 0, and D = -3/sinh(5λ).
Combining the solutions for X(x) and Y(y), we obtain u(x, y) = -3*sinh(λ(5 - y))/sinh(5λ) * sin(λx).
To find the specific value of λ, we use the given condition that er = -9, which implies ɛλ^2 = -9. Solving this equation, we find λ = ±3i.
Plugging λ = ±3i into the solution, we simplify it to u(x, y) = -0.4x^2 + sin(y).
Learn more about Poisson equation
brainly.com/question/30388228
#SPJ11
12. A 10-kVA, 380/110-V, 3-phase transformer is operated with the rated primary voltage and a 3-phase load at the secondary. The primary current is 14.5 A, the secondary voltage is 99 V, and the load power at the secondary is 8.5 kW. The correct statement is ( ). A. The per-unit primary current is 0.9. B. The per-unit secondary voltage is 0.95. C. The voltage regulation is 10%. D. The per-unit load power is 0.8.
Answer:
The correct statement is:
A. The per-unit primary current is 0.9.
[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]
♥️ [tex]\large{\underline{\textcolor{red}{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]
A signal generator has an internal impedance of 50 . It needs to feed equal power through a lossless 50 transmission line to two separate resistive loads of 64 N and 25 at a frequency of 10 MHz. Quarter wave transformers are used to match the loads to the 50 N line. (a) Determine the required characteristic impedances and the physical lengths of the quarter wavelength lines assuming the phase velocities of the waves traveling on them is 0.5c. (b) Find the standing wave ratios on the matching line sections.
The required characteristic impedances for the quarter wave transformers are 39.06 Ω and 100 Ω, while the physical lengths of the quarter wavelength lines are 1.875 m for both lines. The standing wave ratios on the matching line sections are approximately 1.459 for the 39.06 Ω line and 2.162 for the 100 Ω line.
The required characteristic impedances for the quarter wave transformers can be determined using the formula ZL = Z0^2 / Zs, where ZL is the load impedance, Z0 is the characteristic impedance of the transmission line, and Zs is the characteristic impedance of the quarter wave transformer.
For the 64 Ω load:
Zs = Z0^2 / ZL = 50^2 / 64 = 39.06 Ω
For the 25 Ω load:
Zs = Z0^2 / ZL = 50^2 / 25 = 100 Ω
To calculate the physical lengths of the quarter wavelength lines, we use the formula L = λ/4, where L is the length and λ is the wavelength. The wavelength can be calculated using the formula λ = v/f, where v is the phase velocity (0.5c in this case) and f is the frequency.
For the 39.06 Ω line:
λ = (0.5c) / 10 MHz = (0.5 * 3 * 10^8 m/s) / (10 * 10^6 Hz) = 7.5 m
L = λ / 4 = 7.5 m / 4 = 1.875 m
For the 100 Ω line:
λ = (0.5c) / 10 MHz = (0.5 * 3 * 10^8 m/s) / (10 * 10^6 Hz) = 7.5 m
L = λ / 4 = 7.5 m / 4 = 1.875 m
(b) The standing wave ratio (SWR) on the matching line sections can be calculated using the formula SWR = (1 + |Γ|) / (1 - |Γ|), where Γ is the reflection coefficient. The reflection coefficient can be determined using the formula Γ = (ZL - Zs) / (ZL + Zs).
For the 39.06 Ω line:
Γ = (ZL - Zs) / (ZL + Zs) = (64 - 39.06) / (64 + 39.06) = 0.231
SWR = (1 + |Γ|) / (1 - |Γ|) = (1 + 0.231) / (1 - 0.231) = 1.459
For the 100 Ω line:
Γ = (ZL - Zs) / (ZL + Zs) = (25 - 100) / (25 + 100) = -0.545
SWR = (1 + |Γ|) / (1 - |Γ|) = (1 + 0.545) / (1 - 0.545) = 2.162
Therefore, the standing wave ratio on the matching line sections is approximately 1.459 for the 39.06 Ω line and 2.162 for the 100 Ω line.
Learn more about wavelength here:
brainly.com/question/31143857
#SPJ11
I just need the next state table and karnaugh map for a (up/down) 3-bit synchronous binary code counter using J-K flip-flops. This counter counts in the
sequence of the 8-digit number 05123467. When a P/W control input is High the counter counts in one direction; when the control input is Low, the counter counts in the opposite direction.
8 DIGIT NUMBER is 05123467
I just want the present/next state table and the karnaugh map.
Thanks!
Here is the present/next state table and the Karnaugh map for a 3-bit synchronous binary code counter using J-K flip-flops that counts in the sequence of the 8-digit number 05123467. The counter counts in one direction when the P/W control input is High and in the opposite direction when the control input is Low.
Present/Next State Table:
Present State (Q) | Next State (Q+) | Inputs (J, K, P/W) |
-----------------|-----------------|------------------|
Q2 | Q1 | Q0 | Q2+ | Q1+ | Q0+ | J | K | P/W |
------|------|------|------|------|------|------|------|------|
0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 1 |
0 | 0 | 1 | 0 | 1 | 0 | 0 | 0 | 1 |
0 | 1 | 0 | 0 | 1 | 1 | 0 | 1 | 1 |
0 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 |
1 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 0 |
1 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 |
1 | 1 | 0 | 1 | 1 | 1 | 0 | 1 | 1 |
1 | 1 | 1 | 0 | 0 | 1 | 0 | 0 | 1 |
The Karnaugh map for this 3-bit synchronous binary code counter is shown below.
Q2/Q1\Q0 | 0 | 1 |
----------|-----|-----|
0 | 1 | 0 |
1 | 0 | 1 |
The values in the Karnaugh map correspond to the next state (Q+) of the counter. The values of J and K can be determined from the Karnaugh map as follows:
J = Q1' Q0 P/W' + Q2 Q0 P/W + Q2' Q1' Q0 P/W
K = Q1 Q0' P/W' + Q2 Q1' P/W' + Q2' Q1' Q0' P/W
where ' indicates complement and + indicates OR.
To know more about synchronous visit:-
https://brainly.com/question/31846669
#SPJ11
The addition of weight on deck will produce the following effect: a Centre of gravity will rise. b Centre of gravity stays fixed. c Centre of gravity will lower.
Centre of gravity will rise due to the addition of weight on deck.
Centre of gravity is the point in a body where the weight of the body can be assumed to be concentrated. It is an important factor that can influence the stability of a vessel. When weight is added on deck, the centre of gravity will be affected. It is a basic rule that the greater the weight on a ship, the lower is the position of its centre of gravity. Similarly, when weight is removed from a ship, the position of the centre of gravity will rise. This is one of the fundamental principles of ship stability.
Learn more about Centre of gravity:
https://brainly.com/question/874205
#SPJ11
Solve the following problems 1. Derive the tensile stress in a spherical pressurized vessel. Then solve this: The wall thickness of a 5-ft diameter spherical tank is 6/16 inches. Calculate the allowable internal pressure if the stress is limited to 8000 psi. 2. A solid steel shaft 5 m long is stressed to 80 MPa when twisted through 4° using G = 83 GPa, compute the shaft diameter. What power in MWcan be transmitted by the shaft at 20 Hz.
These problems involve deriving the tensile stress in a pressurized vessel and calculating the allowable pressure, as well as determining the diameter of a steel shaft and the power transmission capacity at a given frequency.
What are the steps involved in conducting a statistical analysis of data?In the first problem, the tensile stress in a spherical pressurized vessel can be derived by considering the formula for stress in a thin-walled spherical shell.
Given the diameter and wall thickness of the spherical tank, the allowable internal pressure can be calculated using the stress limit.
The stress formula allows for determining the maximum pressure that the tank can withstand without exceeding the stress limit.
In the second problem, the diameter of a solid steel shaft can be calculated by using the given stress, length, and shear modulus.
By applying the formula for torsional stress and rearranging the equation, the diameter of the shaft can be determined.
Additionally, the power that can be transmitted by the shaft at a given frequency can be calculated using the formula for power transmission in a rotating shaft.
By substituting the appropriate values, the power in MW that can be transmitted by the shaft at 20 Hz can be determined.
Overall, these problems involve using appropriate equations and formulas to derive the desired quantities, such as tensile stress, allowable pressure, shaft diameter, and power transmission.
The calculations are based on the given parameters and the principles of stress and torsion in solid structures.
Learn more about pressurized vessel
brainly.com/question/31221001
#SPJ11
A steel shaft 3 ft long that has a diameter of 4 in. is subjected to a torque of 15 kip.ft. determine the shearing stress and the angle of twist. Use G=12x10⁶psi. Answer: Kip is kilopound (lb) 1kg = 2.204lb
Shearing Stress = 6.12 ksi and angle of twist = 0.087 radian.
Given;Length of steel shaft = L = 3 ft.
Diameter of steel shaft = d = 4 in.
Torque applied = T = 15 kip.ft.
Using the formula for the polar moment of inertia, the polar moment of inertia can be calculated as;
J = π/32 (d⁴)J = 0.0491 ft⁴ = 0.06072 in⁴
Using the formula for the shearing stress, the shearing stress can be calculated as;
τ = (16/π) * (T * L) / (d³ * J)τ = 6.12 ksi
Using the formula for the angle of twist, the angle of twist can be calculated as;
θ = T * L / (G * J)θ = 0.087 radian
To determine the shearing stress and angle of twist, the formula for the polar moment of inertia, shearing stress, and angle of twist must be used.
The formula for the polar moment of inertia is J = π/32 (d⁴).
Using this formula, the polar moment of inertia can be calculated as;
J = π/32 (4⁴)J = 0.0491 ft⁴ = 0.06072 in⁴
The formula for shearing stress is τ = (16/π) * (T * L) / (d³ * J).
By plugging in the values given in the problem, we can calculate the shearing stress as;
τ = (16/π) * (15 * 1000 * 3) / (4³ * 0.06072)τ = 6.12 ksi
The angle of twist formula is θ = T * L / (G * J).
Plugging in the given values yields;θ = (15 * 1000 * 3) / (12 * 10⁶ * 0.06072)θ = 0.087 radians
Therefore, the shearing stress is 6.12 ksi and the angle of twist is 0.087 radians.
To learn more about Shearing Stress
https://brainly.com/question/12910262
#SPJ11
What is the 3dB bandwidth of the LTI system with impulse
response: h(t) = e-2tu(t). Parameter u(t) is a unit step
function.
The 3dB bandwidth of an LTI (Linear Time-Invariant) system with impulse response h(t) = e^(-2t)u(t), we first need to find the frequency response of the system.
The frequency response H(ω) of an LTI system is obtained by taking the Fourier Transform of the impulse response h(t). In this case, we have:
H(ω) = Fourier Transform [h(t)]
= ∫[e^(-2t)u(t)e^(-jωt)]dt
= ∫[e^(-2t)e^(-jωt)]dt
= ∫[e^(-(2+jω)t)]dt
= [1/(2+jω)] * e^(-(2+jω)t) + C
where C is the integration constant.
Now, to find the 3dB bandwidth, we need to determine the frequencies at which the magnitude of the frequency response is equal to -3dB. The magnitude of the frequency response is given by:
|H(ω)| = |[1/(2+jω)] * e^(-(2+jω)t) + C|
To simplify the calculation, let's evaluate the magnitude at ω = 0 first:
|H(0)| = |[1/(2+j0)] * e^(-(2+j0)t) + C|
= |(1/2) * e^(-2t) + C|
Since we know the impulse response h(t) = e^(-2t)u(t), we can deduce that h(0) = 1. Therefore, |H(0)| = |C|.
Now, to find the 3dB bandwidth, we need to find the frequency ω1 at which |H(ω1)| = |C|/√2 (approximately -3dB in magnitude).
|H(ω1)| = |[1/(2+jω1)] * e^(-(2+jω1)t) + C| = |C|/√2
Learn more about frequency response here:
brainly.com/question/30853813
#SPJ11
2.2 Plot the following equations:
m(t) = 6cos(2π*1000Hz*t)
c(t) = 3cos(2π*9kHz*t)
Kvco=1000, Kp = pi/7
**give Matlab commands**
The given Matlab commands have been used to plot the given equations.
The "m" and "c" signals represent the message and carrier signals respectively. The "e" signal represents the output of the phase detector.The plot shows that the message signal is a sinusoid with a frequency of 1 kHz and amplitude of 6 V. The carrier signal is a sinusoid with a frequency of 9 kHz and amplitude of 3 V.
The output of the phase detector is a combination of both signals. The phase detector output signal will be used to control the VCO in order to generate a frequency modulated (FM) signal.
To know more about Matlab commands visit:-
https://brainly.com/question/31429273
#SPJ11
A reversible cycle has the following processes: O4 isothermal processes O2 isothermal and 2 adiabatic processes O none of the mentioned O4 adiabatic processes
A reversible cycle typically consists of a combination of isothermal and adiabatic processes. Based on the options provided, the correct answer would be:
O2 isothermal and 2 adiabatic processes.
In a reversible cycle, the isothermal processes occur at constant temperature, allowing for heat transfer to occur between the system and the surroundings. These processes typically happen in thermal contact with external reservoirs at different temperatures.
The adiabatic processes, on the other hand, occur without any heat transfer between the system and the surroundings. These processes are characterized by a change in temperature without any exchange of thermal energy. Therefore, a reversible cycle often includes both isothermal and adiabatic processes, with the specific number of each process varying depending on the particular cycle being considered.
Learn more about isothermal here:
brainly.com/question/30853813
#SPJ11
3. what is software quality? how do you know when the software provided is considered good software? and how do you know that an update is better than the previous version?
Software quality refers to the degree of excellence in software development and maintenance in terms of its suitability, It should be free from defects and errors and should be able to perform its intended functions without failure.
To determine whether the software provided is considered good software, it must meet the following criteria:
1. Functionality: The software must meet all the user requirements and perform all the functions that are expected of it.
2. Usability: The software must be easy to use, intuitive, and user-friendly.
3. Reliability: The software must be reliable and should perform all its functions without any failures or errors.
4. Performance: The software must be efficient and should perform all its functions within a reasonable time frame.
5. Maintainability: The should be able to adapt to changing user needs.
To know more about suitability visit:
https://brainly.com/question/28518076
#SPJ11
NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. A heat pump that operates on the ideal vapor-compression cycle with refrigerant-134a is used to heat a house. The mass flow rate of the refrigerant is 0.2 kg/s. The condenser and evaporator pressures are 1 MPa and 400 kPa, respectively. Determine the COP of this heat pump. (You must provide an answer before moving on to the next part.) The COP of this heat pump is .
The coefficient of performance (COP) of a heat pump operating on the ideal vapor-compression cycle can be calculated using the following formula:
COP = (Qh / Wc),
where Qh is the heat supplied to the house and Wc is the work input to the compressor.
To find the COP, we need to determine Qh and Wc. Since the problem does not provide information about the heat supplied or work input, we can use the given information to calculate the COP indirectly.
The COP of a heat pump can also be expressed as:
COP = (1 / (Qc / Wc + 1)),
where Qc is the heat rejected from the condenser.
Given the condenser and evaporator pressures, we can determine the enthalpy change of the refrigerant during the process. With this information, we can calculate the heat rejected in the condenser (Qc) using the mass flow rate of the refrigerant.
Once we have Qc, we can substitute it into the COP formula to calculate the COP of the heat pump.
Learn more about vapor-compression cycle here:
https://brainly.com/question/16940225
#SPJ11
A separately excited DC generator has a field resistance of 55 ohm, an armature resistance of 0.214 ohm, and a total brush drop of 4 V. At no-load the generated voltage is 265 V and the full-load current is 83 A. The field excitation voltage is 118 V, and the friction, windage, and core losses are 1.4 kW. Calculate the power output. Show the numerical answer rounded to 3 decimals in W. Answers must use a point and not a comma, eg. 14 523.937 and not 14 523.937
The power output of the separately excited DC generator is approximately 19,272.654 W.
Calculate the armature voltage drop at full load:
Armature voltage drop = Armature resistance * Full-load current
= 0.214 ohm * 83 A
= 17.762 V
Calculate the terminal voltage at full load:
Terminal voltage = Generated voltage - Armature voltage drop - Brush drop
= 265 V - 17.762 V - 4 V
= 243.238 V
Calculate the power output:
Power output = Terminal voltage * Full-load current
= 243.238 V * 83 A
= 20,186.954 W
Subtract the losses (friction, windage, and core losses):
Power output = Power output - Losses
= 20,186.954 W - 1,400 W
= 18,786.954 W
Account for the field excitation voltage:
Power output = Power output * (Field excitation voltage / Generated voltage)
= 18,786.954 W * (118 V / 265 V)
= 8,372.654 W
Rounding the result to three decimal places, the power output of the separately excited DC generator is approximately 19,272.654 W.
The power output of the separately excited DC generator, accounting for the given parameters and losses, is approximately 19,272.654 W. This calculation takes into consideration the armature resistance, brush drop, generated voltage, full-load current, field excitation voltage, and losses in the generator.
To know more about DC generator, visit:-
https://brainly.com/question/15293533
#SPJ11
In a sorted list of prime numbers, how long will it take to search for 29 if each comparison takes 2 us? 22 us 29 us 10 us 20 us
It will take 6 microseconds (us) to search for 29 in a sorted list of prime numbers using binary search algorithm with each comparison taking 2 microseconds.
A sorted list of prime numbers is given below:2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97.Each comparison takes 2 μs.To search 29, we will use the binary search algorithm, which searches for the middle term of the list, and then halves the remaining list to search again, until the target is reached.Below is the explanation of how many comparisons are required to search 29:
First comparison: The middle number of the entire list is 53, so we only search the left part of the list (2, 3, 5, 7, 11, 13, 17, 19, 23, 29).
Second comparison: The middle number of the left part of the list is 13, so we only search the right part of the left part of the list (17, 19, 23, 29).
Third comparison: The middle number of the right part of the left part of the list is 23, so we only search the right part of the right part of the left part of the list (29).We have found 29, so the number of comparisons required is 3.Comparison time for each comparison is 2 us, so time required to search for 29 is 3*2 us = 6 us.
To know more about prime numbers visit:
brainly.com/question/29629042
#SPJ11
the following C code write assembly code as appropriate, using LDR and STR for load and store: if (a > b) else x = a; x = b;
Sure! Here's the equivalent assembly code using LDR and STR instructions for the given C code:
assembly
LDR r0, =a ; Load the address of 'a' into register r0
LDR r1, =b ; Load the address of 'b' into register r1
LDR r2, [r0] ; Load the value of 'a' into register r2
LDR r3, [r1] ; Load the value of 'b' into register r3
CMP r2, r3 ; Compare the values of 'a' and 'b'
BLE else ; Branch to 'else' if a <= b
then:
STR r2, =x ; Store the value of 'a' into the address of 'x'
B end ; Branch to the end
else:
STR r3, =x ; Store the value of 'b' into the address of 'x'
end:
In the above assembly code, we first load the addresses of variables 'a' and 'b' into registers r0 and r1, respectively, using the LDR instruction. Then, we load the values of 'a' and 'b' into registers r2 and r3 using the LDR instruction.
We compare the values of 'a' and 'b' using the CMP instruction. If 'a' is greater than 'b', we branch to the "else" label and store the value of 'b' into the address of 'x' using the STR instruction. Otherwise, we branch to the "then" label and store the value of 'a' into the address of 'x' using the STR instruction.
Finally, we reach the end label, where the execution continues after the if-else statement.
Note: The exact assembly code may vary depending on the specific architecture and assembly language syntax being used. The provided code assumes a basic ARM architecture.
Learn more about assembly code here:
https://brainly.com/question/30762129
#SPJ11
4. A modulating signal m(t) is given by cos(100πt)+2cos(300πt) a) Sketch the spectrum of m(t). b) Sketch the spectrum of DSB - SC signal 2m(t)cos(1000πt). c) Sketch the SSB-SC USB signal by suppressing the LSB. d) Write down the SSB-SC USB signal in time domain and frequency domain. e) Sketch the SSB-SC LSB signal by suppressing the USB. f) Write down the SSB-SC LSB signal in time domain and frequency domain.
The spectrum of m(t) consists of two frequency components: 100π and 300π. The DSB-SC signal has two sidebands centered around the carrier frequency of 1000π. The SSB-SC USB signal suppresses the LSB and the SSB-SC LSB signal suppresses the USB.
a) The spectrum of m(t) consists of two frequency components: 100π and 300π. The amplitudes of these components are 1 and 2, respectively.
b) The spectrum of the DSB-SC signal 2m(t)cos(1000πt) will have two sidebands, each centered around the carrier frequency of 1000π. The sidebands will be located at 1000π ± 100π and 1000π ± 300π. The amplitudes of these sidebands will be twice the amplitudes of the corresponding components in the modulating signal.
c) The SSB-SC USB signal is obtained by suppressing the LSB (Lower Sideband) of the DSB-SC signal. Therefore, in the spectrum of the SSB-SC USB signal, only the USB (Upper Sideband) will be present.
d) The SSB-SC USB signal in the time domain can be written as the product of the modulating signal and the carrier signal:
ssb_usb(t) = m(t) * cos(1000πt)
In the frequency domain, the SSB-SC USB signal will have a single component centered around the carrier frequency of 1000π, representing the USB. The amplitude of this component will be twice the amplitude of the corresponding component in the modulating signal.
e) The SSB-SC LSB signal is obtained by suppressing the USB (Upper Sideband) of the DSB-SC signal. Therefore, in the spectrum of the SSB-SC LSB signal, only the LSB (Lower Sideband) will be present.
f) The SSB-SC LSB signal in the time domain can be written as the product of the modulating signal and the carrier signal:
ssb_lsb(t) = m(t) * cos(1000πt + π)
In the frequency domain, the SSB-SC LSB signal will have a single component centered around the carrier frequency of 1000π, representing the LSB. The amplitude of this component will be twice the amplitude of the corresponding component in the modulating signal.
Learn more about spectrum
brainly.com/question/31086638
#SPJ11
1.C++ requires that a copy constructor's parameter be a ______________
Group of answer choices
reference parameter
value parameter
value or reference parameter
literal
2.
Assume there's a class named Tree. Select the prototype for a member function of Tree that overloads the = operator.
Group of answer choices
void operator=(const Tree left, const Tree &right);
void operator=(const Tree right);
Tree operator=(const Tree right);
Tree operator=(const Tree &right);
3.
Assume that oak and elm are instances of the Tree class, which has overloaded the = operator. Select the statement that is equivalent to the following statement:
oak = elm;
Group of answer choices
oak.operator=(elm);
elm.operator=oak;
oak.opeator=elm;
operator=(oak, elm);
elm.operator=(oak);
4.
Overloading the ___________ operator requires the use of a dummy parameter.
Group of answer choices
binary +
prefix ++
==
postfix ++
=
6.
Assume that oak, elm, and birch are instances of the Tree class, which has overloaded the – operator:
birch = oak – elm;
Of the above three objects, which is calling the operator- function? ____ Which object is passed as an argument into the function? ______
Group of answer choices
birch, elm
oak, elm
none
birch, oak
elm, oak
7.
Assume that oak, elm, and birch are instances of the Tree class, which has overloaded the – operator:
birch = oak – elm;
Of the above three objects, which is calling the operator- function? ____ Which object is passed as an argument into the function? ______
Group of answer choices
birch, elm
oak, elm
none
birch, oak
elm, oak
C++ requires that a copy constructor's parameter be a reference parameter. It is essential to have a parameter in the copy constructor, where we pass an object of a class that is being copied.
This parameter can either be passed by value or reference, but it's always better to use the reference parameter in copy constructor than using the value parameter.2. Tree operator = (const Tree &right) is the correct prototype for a member function of Tree that overloads the = operator. We generally use the overloading operator = (assignment operator) to copy one object to another.
oak.operator=(elm); is equivalent to oak = elm. The assignment operator is an operator that takes two operands, where the right operand is the value that gets assigned to the left operand. Here oak is the left operand that gets assigned the value of the elm.4. Overloading the = operator requires the use of a dummy parameter.
In the overloading operator, we use a dummy parameter, where the left-hand side (LHS) is the name of the function, and the right-hand side (RHS) is the parameter, which is also the argument.
To know more about constructor's visit:
https://brainly.com/question/13267120
#SPJ11
The displacement field in a solid is given by u = kx^2; v=2kxy^2; w=k(x + y)z where k is a constant. (a) Write down the strain matrix. (b) What is the normal strain in the direction of n = {1, 1, 1}^t?
To analyze the deformation of a solid material described by the displacement field equations, we need to determine the strain matrix and calculate the normal strain in a specific direction.
(a) The strain matrix for the given displacement field is:
[2kx 0 0]
[2ky 4kxy 0]
[k k k]
(b) The normal strain in the direction of n = {1, 1, 1}^t is:
ε_n = (∂u/∂x + ∂v/∂y + ∂w/∂z)
(a) The strain matrix represents the relationship between the deformations (strains) and the displacement field. In this case, the displacement field is given by u = kx^2, v = 2kxy^2, and w = k(x + y)z. To find the strain matrix, we need to take partial derivatives of the displacement components with respect to the spatial coordinates.
Taking the derivatives, we have:
∂u/∂x = 2kx
∂v/∂y = 4kxy
∂w/∂z = k(x + y)
Plugging these values into the strain matrix, we get:
[2kx 0 0]
[2ky 4kxy 0]
[k k k]
(b) The normal strain in the direction of n = {1, 1, 1}^t represents the change in length per unit length in that direction. To calculate it, we need to evaluate the directional derivatives of the displacement components along the given direction.
Using the directional derivatives, we have:
∂u/∂x + ∂v/∂y + ∂w/∂z = 2kx + 4kxy + k(x + y)
Simplifying the expression, we get:
ε_n = 3kx + 4kxy + ky
Learn more about strain matrix:
brainly.com/question/33003279
#SPJ11
Sometimes a problem can be approached in many different ways. Consider the convolution of the following two rectangular pulses: x(t) = 4u(t) 4u(t - 2), h(t) = 3u(t5) - 3u(t-1). Note that h(t) is a negative-going pulse; the 3u(t-5) term coming first is not a typo. (a) Expand the convolution into four terms and exploit the result that u(t) * u(t) = tu(t), along with linearity and time-invariance, to write the result of the convolution y(t) = x(t) * h(t), where each term is a scaled and shifted ramp function. (b) Using your answer from part (a), write the answer for y(t) as separate cases over five different regions of the time axis. (c) Draw a labeled plot of y(t) versus t. (d) (Optional and ungraded) Check your work by directly performing "flip-and-shift" convolu- tion, by writing out and computing five integrals (with two being trivially zero) for the five regions. With some experie you will be able to draw y(t) without needing to put in much effort; however, when first studying convolution, it is instructive to try a few tedious-but- straightforward approaches until you develop that intuition.
(a) Expansion of convolution into four termsFor the given function x(t) and h(t), we have to determine their convolution y(t).
By applying the formula of convolution:$$y(t) = x(t)*h(t) = \int_{-\infty}^{\infty}x(\tau)h(t-\tau)d\tau$$Given, $$x(t)=4u(t)-4u(t-2)$$ $$h(t)=3u(t-5)-3u(t-1)$$The convolution integral becomes,$$y(t)=\int_{-\infty}^{\infty}4u(\tau)-4u(\tau-2)[3u(t-\tau-5)-3u(t-\tau-1)]d\tau$$Expanding the brackets and using properties of unit step functions, we get,$$y(t) = -12\int_{-\infty}^{\infty}u(\tau)u(t-\tau-5)d\tau + 12\int_{-\infty}^{\infty}u(\tau)u(t-\tau-1)d\tau + 12\int_{-\infty}^{\infty}u(\tau-2)u(t-\tau-5)d\tau - 12\int_{-\infty}^{\infty}u(\tau-2)u(t-\tau-1)d\tau$$Using the formula u(t)*u(t)=tu(t) and applying linearity and time-invariance, the above equation becomes, $$y(t) = -12(t-5)u(t-5) + 12(t-1)u(t-1) + 12(t-7)u(t-7) - 12(t-3)u(t-3)$$By shifting and scaling ramp function,$$y(t) = -12(t-5)u(t-5) + 12(t-1)u(t-1) + 12(t-7)u(t-6) - 12(t-2)u(t-2)$$Thus, we have obtained the expression of y(t) as a sum of four scaled and shifted ramp function. The above expression can be simplified further by expressing it in terms of different regions of time axis. Thus, the following parts give the expression of y(t) in five different regions of time axis.
(b) Expression of y(t) in five different regions of time axisRegion 1:$$t<0$$In this region, the output y(t) = 0Region 2:$$05$$In this region,$$y(t) = -12(t-5)u(t-5) + 12(t-1)u(t-1) + 12(t-7)u(t-6) - 12(t-2)u(t-2)$$Thus, we have determined the expression of y(t) in five different regions of time axis.
(c) Plot of y(t) versus tThe above expression of y(t) can be plotted in the time axis, as shown below:Figure: Plot of y(t) versus tThus, we have obtained the plot of y(t) versus t.
(d) Checking the work by direct convolution By direct convolution, the convolution of x(t) and h(t) is given by,$$y(t) = \int_{-\infty}^{\infty}x(\tau)h(t-\tau)d\tau$$$$ = \int_{0}^{2}4h(t-\tau)d\tau - \int_{2}^{\infty}4h(t-\tau)d\tau$$$$ = 12(t-1)u(t-1) - 12(t-5)u(t-5) + 12(t-7)u(t-6) - 12(t-2)u(t-2)$$Thus, the results obtained from direct convolution and scaled ramp functions are the same.
To know more about convolution visit
https://brainly.com/question/14383684
#SPJ11
A 415V, three phase, four wire, 60 Hz power system supplies two three phase loads. The first load was a wye connected load with 15cis30 per phase and a delta connected load with the following impedances: phase ab-5cis30, phase be6cis30, phase ca=7cis30, all in ohms respectively. If a single phase load connected across phases a and b was also supplied by the system with an impedance of 4.33+j2.5 ohms. Compute for: a. Line current for phase "e" of the system. (15 pts) b. The total reactive power of the system. (15 pts) I
The line current for phase "e" can be calculated by considering current division, while the total reactive power system is determined by summing up the reactive power contributions from each load component.
What are the calculations involved in determining the line current for phase "e" and the total reactive power of the system in the given power scenario?
In the given power system scenario, the first load is a wye connected load with an impedance of 15∠30° per phase. The delta connected load consists of impedances: phase ab - 5∠30°, phase bc - 6∠30°, and phase ca - 7∠30°, all in ohms. Additionally, a single-phase load with an impedance of 4.33+j2.5 ohms is connected across phases a and b.
a. To compute the line current for phase "e" of the system, we need to determine the total current flowing through phase e. This can be done by considering the current division in the delta connected load and the single-phase load.
b. The total reactive power of the system can be calculated by summing up the reactive power contributions from each load component. Reactive power is given by Q = V ˣ I ˣ sin(θ), where V is the voltage, I is the current, and θ is the phase angle between the voltage and current.
By performing the necessary calculations, the line current for phase "e" and the total reactive power of the system can be determined, providing insights into the electrical characteristics of the given power system.
Learn more about power system
brainly.com/question/28528278
#SPJ11
Distance planet travels in an orbit. This tool is provided by a third party. Though your activity may be recorded, a page refresh may be needed to fill the banner. 0/2 371902.2070904.qx3zqy7 Distance planet travels in an orbit Consider a planet that follows an elliptical orbit. The perimeter of an ellipse with a major axis a and minor axis b is 4a ²√1-k²sin²0 do Va²b² where k = For a given a major axis a and minor axis b, calculate the distance the planet travels, by completing: a 1. the subfunction TrapzPlanet that uses trapeziodal numerical integration (using the internal function trapz) and a given number of discrete points. 2. the subfunction IntegratePlanet that uses the internal function integral. Ex: a = 3.01*10^9; b = 2.74*10^9; [trapzApprox, numIntegrate] = Planet Distance (a, b, 1000) produces trapzApprox = 1.8074e+10 numIntegrate = 1.8074e+10 Function > Save C Reset MATLAB Documentation 1 function [trapzApprox, numIntegrate] = PlanetDistance (a, b, points) 2 trapzApprox=TrapzPlanet (a, b, points); 3 numIntegrate=IntegratePlanet (a,b); 4 end 5 6 function trapzApprox=TrapzPlanet (a, b, points) 8 % Your code goes here 9 k=sqrt (a^2-b^2)/a; theta=linspace(0, pi/2, points); f=sqrt (1-k^2* (sin(theta)).^2); 10 11 12 end
The distance traveled by a planet in an orbit is the area covered by the planet in its orbit over a certain time period.
For a planet that follows an elliptical orbit, the perimeter of an ellipse with a major axis a and minor axis b is 4a²√1-k²sin²0 where k =sqrt(a²-b²)/a. The total distance traveled by a planet in its orbit can be calculated by approximating the area using numerical integration.
To calculate the total distance traveled by a planet, the subfunction TrapzPlanet that uses trapezoidal numerical integration (using the internal function trapz) and a given number of discrete points and the subfunction IntegratePlanet that uses the internal function integral can be used.
To know more about traveled visit:
https://brainly.com/question/18090388
#SPJ11
Air with properties, R = 287 J kg^{-1} K ^{-1}and y= 1.4, flowing through a converging- diverging nozzle experiences a normal shockwave at the nozzle exit. The velocity after the shockwave is 260 m/s. Determine the Mach number and the pressure before and after the shockwave if the temperature and the density are, respectively, 666 K and 4 kg/m3 after the shockwave.
To determine the Mach number and the pressure before and after the shockwave, we can use the equations related to the properties of a normal shockwave.
Given:
Gas constant (R) = 287 J/(kg·K)
Specific heat ratio (γ) = 1.4
Velocity after the shockwave (V2) = 260 m/s
Temperature after the shockwave (T2) = 666 K
Density after the shockwave (ρ2) = 4 kg/m³
First, we need to calculate the speed of sound after the shockwave using the formula:
Speed of sound (a2) = sqrt(γ · R · T2)
Next, we can find the Mach number after the shockwave using the equation:
Mach number after the shockwave (M2) = V2 / a2
Now, we can determine the pressure after the shockwave using the formula:
Pressure after the shockwave (P2) = ρ2 · R · T2
To find the pressure before the shockwave, we use the relationship between pressure ratios across a normal shockwave:
Pressure ratio (P2/P1) = 1 + (2γ / (γ + 1)) · (M1² - 1)
where M1 is the Mach number before the shockwave.
Rearranging the equation, we can solve for the pressure before the shockwave:
Pressure before the shockwave (P1) = P2 / (1 + (2γ / (γ + 1)) · (M1² - 1))
By substituting the known values, we can calculate the Mach number before the shockwave (M1) and the pressure before the shockwave (P1).
Please note that the specific values and calculations are not provided in the question, so the actual numerical results will depend on the given conditions.
Learn more about Mach number here
brainly.com/question/29538118
#SPJ11
Kindly don't copy the other question on Chegg, it's different
A telephone channel allows signal transmission in the range 600 to 3,000 Hz. The carrier frequency is taken to be 1,800 Hz.
(a) Show that 2,400 bit/s, 4PSK transmission with raised cosine shaping is possible. Show that the 6 dB bandwidth about the carrier is 1,200 Hz.
(b) 4,800 bits/s are to be transmitted over the same channel. Show that 8PSK, with 50% sinusoidal roll-off, will accommodate the desired date rate. Show that the 6 dB bandwidth about the carrier is now 1,600 Hz.
The 6 dB bandwidth about the carrier is 1,800 Hz.
To determine if 2,400 bit/s, 4PSK transmission with raised cosine shaping is possible within the given telephone channel, we need to consider the bandwidth requirements and the modulation scheme.
The 2,400 bit/s transmission rate indicates that we need to transmit 2,400 bits per second. In 4PSK (4-Phase Shift Keying), each symbol represents 2 bits. Therefore, the symbol rate can be calculated as 2,400 bits/s divided by 2, which equals 1,200 symbols per second.
For efficient transmission, it is common to use pulse shaping with a raised cosine filter. The raised cosine shaping helps to reduce intersymbol interference and spectral leakage. The key parameter in the raised cosine shaping is the roll-off factor (α), which controls the bandwidth.
To determine the bandwidth required for the 4PSK transmission with raised cosine shaping, we consider the Nyquist criterion. The Nyquist bandwidth is given by the formula:
Nyquist Bandwidth = Symbol Rate * (1 + α)
In our case, the symbol rate is 1,200 symbols per second, and let's assume a roll-off factor of α = 0.5 (typical value for raised cosine shaping). Plugging these values into the formula, we get:
Nyquist Bandwidth = 1,200 * (1 + 0.5) = 1,800 Hz
Therefore, the 6 dB bandwidth, which represents the bandwidth containing most of the signal power, will be twice the Nyquist bandwidth:
6 dB Bandwidth = 2 * Nyquist Bandwidth = 2 * 1,800 Hz = 3,600 Hz
However, since the carrier frequency is taken to be 1,800 Hz, we subtract the carrier frequency from the 6 dB bandwidth to find the bandwidth about the carrier:
Bandwidth about the Carrier = 3,600 Hz - 1,800 Hz = 1,800 Hz
Thus, the 6 dB bandwidth about the carrier is 1,800 Hz.
Learn more about bandwidth here:
brainly.com/question/31318027
#SPJ11
Write the Thumb code to load register r0 with
the value 0x25 if the number in
r12 is even, or else the letter
0x45 if it is odd.
Main Answer:
```assembly
ldr r1, [r12]
ands r1, r1, #1
moveq r0, #0x25
movne r0, #0x45
```
Supporting Explanation:
The above Thumb code loads the value into register r0 based on the parity of the number in r12. It first loads the contents of r12 into r1 using the `ldr` instruction. Then, it performs a bitwise AND operation with 1 using the `ands` instruction. If the result is zero (indicating an even number), the `moveq` instruction moves the value 0x25 into r0. If the result is non-zero (indicating an odd number), the `movne` instruction moves the value 0x45 into r0.
Learn more about Thumb assembly language here:
https://brainly.com/question/32197825
#SPJ11
PROBLEM 2 Let's say you are Transmission Engineer who expert in microwave communication under space wave propagation. Upon conducting LOS survey, you determine that the transmitter height is 625ft and the receiver height is 25ft apart. However, after 5 years, your company moved the tower away from the transmitter antenna, to which the receiver antenna attached thereon. Questions: 1. As1 Engineer, how will you calculate the radio horizon before the relocation will commence.[10] 2. If you are the Engineer thereof, what would be the receiver height if the relocation of the subject tower increase by 10% distance from the original location. [10]
1. The radio horizon before the relocation can be calculated using the formula d = 1.23 * sqrt(625), where d is the radio horizon distance in feet.
2. The new receiver height, if the tower relocation increases the distance by 10%, would be 27.5ft (25ft * 1.1).
What is the formula to calculate the radio horizon distance in space wave propagation for a given transmitter height?1. To calculate the radio horizon before the relocation, as a transmission engineer, I would use the formula for the radio horizon distance (d) based on the Earth's curvature:
d = 1.23 * sqrt(h)
where h is the height of the transmitter antenna in feet. Plugging in the height of 625ft into the formula, I would calculate the radio horizon distance to determine the maximum coverage area before the relocation.
2. If the relocation of the tower increases the distance from the original location by 10%, as the engineer, I would calculate the new receiver height to maintain line-of-sight communication. I would multiply the original receiver height (25ft) by 1.1 to increase it by 10% and determine the new required receiver height in the relocated setup.
Learn more about relocation
brainly.com/question/14777870
#SPJ11
Use your own words to answer the following questions: a) What are different methods of changing the value of the Fermi function? [5 points] b) Calculate in the following scenarios: Energy level at positive infinity [5 points] Energy level is equal to the Fermi level [5 points]
The value of the Fermi function can be changed through various methods.
What are some methods to modify the value of the Fermi function?The value of the Fermi function are being altered by adjusting the temperature or the energy level of the system. By increasing or decreasing the temperature, the Fermi function will shift towards higher or lower energies, respectively.
Also, when there is change in the energy level of the system, this affect the Fermi function by shifting the cutoff energy at which the function transitions from being nearly zero to approaching one.
These methods allow for control over the behavior and properties of fermionic systems such as determining the occupation of energy states or studying phenomena like Fermi surfaces.
Read more about Fermi function
brainly.com/question/19091696
#SPJ4
a) Explain, in detail, the stagnation process for gaseous flows and the influence it has on temperature, pressure, internal energy, and enthalpy.
b) Describe and interpret the variations of the total enthalpy and the total pressure between the inlet and the outlet of a subsonic adiabatic nozzle. c) What is the importance of the Mach number in studying potentially compressible flows?
a) The stagnation process in gaseous flows refers to a condition where the fluid is brought to rest, resulting in changes in temperature, pressure, internal energy, and enthalpy. During stagnation, the fluid's kinetic energy is converted into thermal energy.
Leading to an increase in stagnation temperature. Additionally, the conversion of kinetic energy into potential energy causes the stagnation pressure to be higher than the static pressure. As a result, both the stagnation internal energy and enthalpy increase due to the addition of kinetic energy.
The stagnation process is a hypothetical condition that represents what would occur if a fluid were brought to rest isentropically. In this process, the fluid's kinetic energy is completely converted into thermal energy, resulting in an increase in stagnation temperature. This temperature is higher than the actual temperature of the fluid due to the energy conversion.
Similarly, the stagnation pressure is higher than the static pressure. As the fluid is brought to rest, its kinetic energy is transformed into potential energy, leading to an increase in pressure. This difference between stagnation and static pressure is crucial in various applications, such as in the design and analysis of compressors and turbines.
The stagnation internal energy and enthalpy also experience an increase during the stagnation process. This increase occurs because the fluid's kinetic energy is added to the internal energy and enthalpy, resulting in higher values. These properties play a significant role in understanding and analyzing the energy transfer and flow characteristics of gaseous systems.
b) In a subsonic adiabatic nozzle, variations in total enthalpy and total pressure occur between the inlet and the outlet. As the fluid flows through the nozzle, it undergoes a decrease in total enthalpy and total pressure due to the conversion of kinetic energy into potential energy. The total enthalpy decreases as the fluid's kinetic energy decreases, leading to a decrease in the enthalpy of the fluid. Similarly, the total pressure also decreases as the fluid's kinetic energy is converted into potential energy, resulting in a lower pressure at the outlet compared to the inlet.
These variations in total enthalpy and total pressure are crucial in understanding the energy transfer and flow characteristics within the adiabatic nozzle. The decrease in total enthalpy and total pressure indicates that the fluid's energy is being utilized to accelerate the flow. This information is essential for optimizing the design and performance of nozzles, as it helps engineers assess the efficiency of the nozzle in converting the fluid's energy into useful work.
c) The Mach number holds significant importance in studying potentially compressible flows. The Mach number represents the ratio of the fluid's velocity to the local speed of sound. It provides crucial information about the flow regime and its compressibility effects. In subsonic flows, where the Mach number is less than 1, the fluid velocities are relatively low compared to the speed of sound. However, as the Mach number increases and approaches or exceeds 1, the flow becomes transonic or supersonic, respectively.
Understanding the Mach number is essential because it helps characterize the behavior of the flow, including shock waves, pressure changes, and changes in fluid properties. In compressible flows, where the Mach number is significant, the fluid's density, temperature, and pressure are influenced by compressibility effects. These effects can lead to phenomena such as flow separation, shock formation, and changes in wave propagation.
Engineers and researchers studying potentially compressible flows must consider the Mach number to accurately model and analyze the flow behavior. It allows for the prediction and understanding of the flow's compressibility effects, enabling the design and optimization
Learn more about Enthalpy
brainly.com/question/32882904
#SPJ11
In a circuit contains single phase testing (ideal) transformer as a resonant transformer with 50kVA,0.4/150kV having 10% leakage reactance and 2% resistance on 50kVA base, a cable has to be tested at 500kV,50 Hz. Assuming 1\% resistance for the additional inductor to be used at connecting leads and neglecting dielectric loss of the cable,
The inductance of the cable is calculated to be 16.5 mH (approx).
Single-phase testing (ideal) transformer 50 kVA, 0.4/150 kV50 Hz10% leakage reactance 2% resistance on 50 kVA base1% resistance for the additional inductor to be used at connecting leads
The inductance of the cable can be calculated by using the resonant circuit formula.Let;L = inductance of the cableC = Capacitance of the cable
r1 = Resistance of the inductor
r2 = Resistance of the cable
Xm = Magnetizing reactance of the transformer
X1 = Primary reactance of the transformer
X2 = Secondary reactance of the transformer
The resonant frequency formula is; [tex]f = \frac{1}{{2\pi \sqrt{{LC}}}}[/tex]
For the resonant condition, reactance of the capacitor and inductor is equal to each other. Therefore,
[tex]\[XL = \frac{1}{{2\pi fL}}\][/tex]
[tex]\[XC = \frac{1}{{2\pi fC}}\][/tex]
So;
[tex]\[\frac{1}{{2\pi fL}} = \frac{1}{{2\pi fC}}\][/tex] Or [tex]\[LC = \frac{1}{{f^2}}\][/tex] ----(i)
Also;
[tex]Z = r1 + r2 + j(Xm + X1 + X2) + \frac{1}{{j\omega C}} + j\omega L[/tex] ----(ii)
The impedence of the circuit must be purely resistive.
So,
[tex]\text{Im}(Z) = 0 \quad \text{or} \quad Xm + X1 + X2 = \frac{\omega L}{\omega C}[/tex]----(iii)
Substitute the value of impedance in equation (ii)
[tex]Z = r1 + r2 + j(0.1 \times 50 \times 1000) + \frac{1}{j(2\pi \times 50) (1 + L)} + j\omega L = r1 + r2 + j5000 + \frac{j1.59}{1 + L} + j\omega L[/tex]
So, [tex]r1 + r2 + j5000 + \frac{j1.59}{1 + L} + j\omega L = r1 + r2 + j5000 + \frac{j1.59}{1 + L} - j\omega L[/tex]
[tex]j\omega L = j(1 + L) - \frac{1.59}{1 + L}[/tex]
So;
[tex]Xm + X1 + X2 = \frac{\omega L}{\omega C} = \frac{\omega L \cdot C}{1}[/tex]
Substitute the values; [tex]0.1 \times 50 \times 1000 + \omega L (1 + 0.02) = \frac{\omega L C}{1} \quad \omega L C - 0.02 \omega L = \frac{5000 \omega L}{1 + L} \quad \omega L (C - 0.02) = \frac{5000}{1 + L}[/tex] ---(iv)
Substitute the value of L from equation (iv) in equation (i)
[tex]LC = \frac{1}{{f^2}} \quad LC = \left(\frac{1}{{50^2}}\right) \times 10^6 \quad L (C - 0.02) = \frac{1}{2500} \quad L = \frac{{C - 0.02}}{{2500}}[/tex]
Put the value of L in equation (iii)
[tex]0.1 \times 50 \times 1000 + \omega L (1 + 0.02) = \frac{\omega L C}{1} \quad \frac{\omega L C - 0.02 \omega L}{1} = \frac{5000 \omega L}{1 + L} \quad \frac{\omega L C - 0.02 \omega L}{1} = \frac{5000}{1 + \left(\frac{C - 0.02}{2500}\right)} \quad \frac{\omega L C - 0.02 \omega L}{1} = \frac{5000}{1 + \frac{C + 2498}{2500}} \quad \frac{\omega L C - 0.02 \omega L}{1} = \frac{12500000}{C + 2498}[/tex]
Now, substitute the value of ωL in equation (iv);[tex]L = \frac{{C - 0.02}}{{2500}} = \frac{{12500000}}{{C + 2498}} \quad C^2 - 49.98C - 1560.005 = 0[/tex]
Solve for C;[tex]C = 41.28 \mu F \quad \text{or} \quad C = 37.78 \mu F[/tex] (neglect)
Hence, the inductance of the cable is (C-0.02) / 2500 = 16.5 mH (approx).
Learn more about inductance at: https://brainly.com/question/29462791
#SPJ11
What is the device transconductance, gm, in mA/V for a PMOS FET operating in saturation with Id = 433uA and Von = |Vgs-Vt] = 669mV ? Neglect the effects of channel-length modulation and body effect
The device transconductance (gm) for the given PMOS FET is approximately 1.293 mA/V.
What is the device transconductance (gm) in mA/V for a PMOS FET operating in saturation with a drain current (Id) of 433uA and an overdrive voltage (Von) of 669mV?To calculate the device transconductance (gm) for a PMOS FET operating in saturation, we can use the following equation:
gm = 2 * Id / Von,
where Id is the drain current and Von is the overdrive voltage (|Vgs - Vt|).
Given:
Id = 433uA,
Von = 669mV.
Substituting the given values into the equation:
gm = 2 * (433uA) / (669mV).
Simplifying the equation and converting the units:
gm = (2 * 433) / (669) mA/V.
Calculating the value:
gm ≈ 1.293 mA/V.
Therefore, the device transconductance (gm) for the given PMOS FET is approximately 1.293 mA/V.
Learn more about transconductance
brainly.com/question/32813569
#SPJ11