Answer:
Output device
Explanation:
The screen/projector puts out data (in this case the presentation) for viewers.
Question #1
What do you use to navigate through a file by moving the view
up and down or side to side?
O Title bar
O Ribbon
O Document area
O Scroll bar
Answer:
Answer is the Scroll Bar
Explanation:
When you are in a document, the way you move around or navigate in it is by dragging the scroll bar that is to the left of your screen or at the bottom of your screen. Hope this helps!
What is the outside of an iPhone called?
Sam card tray is the answer
Your network administrator finds a virus in the network software. Fortunately, she was able to eliminate it before it resulted in a denial-of-service attack, which would have prevented legitimate users of the networked database from gaining access to the records needed. It turns out that the network software did not have adequate security protections in place. The fact that this virus was successfully inserted into the network software points to a ______ the network software.
Answer:
Vulnerability of.
Explanation:
In this scenario, your network administrator finds a virus in the network software. Fortunately, she was able to eliminate it before it resulted in a denial-of-service attack, which would have prevented legitimate users of the networked database from gaining access to the records needed. It turns out that the network software did not have adequate security protections in place. The fact that this virus was successfully inserted into the network software points to a vulnerability of the network software.
In Cybersecurity, vulnerability can be defined as any weakness, flaw or defect found in a software application or network and are exploitable by an attacker or hacker to gain an unauthorized access or privileges to sensitive data in a computer system.
This ultimately implies that, vulnerability in a network avail attackers or any threat agent the opportunity to leverage on the flaws, errors, weaknesses or defects found in order to compromise the security of the network.
Some of the ways to prevent vulnerability in a network are;
1. Ensure you use a very strong password with complexity through the use of alphanumerics.
2. You should use a two-way authentication service.
3. You should use encrypting software applications or services.
which check the functioning of all the connected hardwares including primary and secondary storage devices
Answer: The computer processor
Explanation:
The computer processor is also called the central processing unit and it's function is to analyzes data and also disperses data. It is the computer's brain as it tells the computer the kind of programs to do at a particular time.
The computer processor checks the functioning of all the connected hardwares including primary and secondary storage devices.
What is the name of a shortcut you can click to access other websites? A. A post B. A key C. HTML D. A link
Answer:
D. A link
Explanation:
I hope this helps.
Answer:
A LINK
Explanation:
I just did the test
edhesive 1.7 code practice question 1
Fix the error so that the code works correctly
input (“Enter a number: “)
print (num * 8)
How do I fix the error?
Answer:
num = int(input("Enter a number: "))
print(num * 8)
Explanation:
I highlighted the parts that are added
Since you are getting an input from the user, you need to set the result to a variable. In this case, it is num.
Since it is a number, you need to specify the its type. In this case, it may be int.
Also, the quotation marks must be written as seen.
The corrected program which ensures that the program runs correctly is written thus :
num = int(input("Enter a number: ")
#user supplied input should be assigned to the varibale num
print(num * 8)
#multiplies num by 8 and displays the output.
The num variable in the second line isn't attached to any value, therefore, it will throw an error. The user input value should be attached to the variable, 'num' The second line of code multiplies num by 8 and displays the product.Therefore, if the the user input is 3 ; the final result displayed will be : (3 × 8) = 24.
Learn more :https://brainly.com/question/15566254
The question is in the picture
Answer:
nordthaf
Explanation:
nofth
A network is:
A. A group of people or things that are individually connected to one another.
B. A number of individuals who share the same values and ideas.
C.a means of mass communication in print and other forms.
D. The main idea or information contained in a media piece.
Explanation:
The answer to this question is A
Which example of IT lifelong learning is most likely to lead to a promotion
Answer:
A supervisor learns about personal finance.
Hope the above answer helps u...
If my answer helped u mark me as brainlist..!
Follow me...✌
Answer:
A supervisor learns about personal finance.
Explanation:
what are the earliest invention in human history
Answer: Tools, Boats, Hand made bricks.
Explanation: The tools were the first technological advancement, the boats were the next, them hand made bricks for construction.
what is ovoviviparous?
Answer:
o·vo·vi·vip·a·rous
Explanation:
(of an animal) producing young by means of eggs which are hatched within the body of the parent, as in some snakes.
Suppose you have a class Ship, which was written by another programmer who used to work for your employer. Ship is used in several different applications. Ship contains a public method called getBearing() that consults gyroscopes and a compass to determine the direction in which the ship is moving and returns a Location object. You need to refactor the code to use a GPS receiver instead. You should
Answer:
Research of the GPS features and the modules and packages needed by the programming language to implement and receive data from a GPS tracker.
Explanation:
The Ship class is a blueprint that holds a data structure of a ship's location in coordinates. The location variable can be changed using the getBearing method and an instance of the ship class can be made several times for different ships in the harbor. This class depicts the power of object-oriented programming.
Refactoring is a concept in software engineering where source codes are modified to achieve code efficiency and speed. All programming language source code should be refactored where needed with the right packages or modules.
When computers are connected and operate through one main computer, it is called a _________ network. centralized client server GUI peer-peer
Answer:
the answer would be a client server
Explanation:
In a situation wherein computers are connected and operate through one main computer, it is called a client server network. Therefore, the option B holds true.
What is the significance of a client server network?A client-server network can be referred to or considered as a network wherein all the systems that are collectively a part of the computer network are controlled and handled by a single system. This single system of computers is also known as the main computer.
The main computer has access to all the data, as well as information tracking of the activities performed by the main computer. In order to access anything between the different systems, the members systems need to get authorized access through the main computer.
Therefore, the option B holds true and states regarding the significance of a client server network.
Learn more about a client server network here:
https://brainly.com/question/28099574
#SPJ2
Write code that determines the number of full days represented by the number of hours stored in the variable hours and stores that value in the variable full_days. For example, the number of full days in 50 hours is 2. Ignore any leftover hours that don't contribute to a full day. Assume the value of hours has already been initialized. Solve It!
Answer:
hours = 50
full_days = int(hours / 24)
print("The number of full days in " + str(hours) + " hours is " + str(full_days))
Explanation:
Initialize the hours
Since there are 24 hours in a full day, divide the hours by 24. Note that you need to typecast it to the int, because the result is a decimal value by default
Print the values as requested
What is true about connectionless packet switched networks? a. each datagram must contain both source and destination addresses b. without a connection, datagrams may not arrive in sequential order at the destination c. establishment of a connection between communicating points is not required prior to exchanging datagrams, thus reducing overhead communications d. all of the above are true
Answer:
d. all of the above are true
Explanation:
Connectionless Packet Switching is a term that is used in computer networking operations to describe the breaking of information exchange path into a various packet of small sizes acquired and refined over network switches and routers, which is then transferred from one subsequent node to the other. It is sometimes referred to as Datagram Networks
However, during this operation, Connectionless Packet Switching must satisfy the following amongst others:
1. each datagram must comprise both source and destination addresses
2. without a connection, datagrams may not come in sequential order at the destination
3. establishment of a connection between communicating points is not needed prior to exchanging datagrams, thus reducing overhead communications
Therefore, considering the available options, the correct answer is option D
How many bits are reserved for the Transmission Control Protocol (TCP) flags?
Explain demand paging with a proper example
Where is the video card located in a computer?
How to Print output in JavaScript
If you want to print on a page you can use
document.write();
If you want to write in console then there are multiple options
console.log() - to log information
console.error();- to log errors
console.warn(); - to log warning message
If you want to popup some information the you can use -
alert(message);
there are also various options present in alert.
or
print() essentially just calls up the native print dialog for a given window.
But as you're are thinking, it will work on any window or (i)frame.
thus if you write content to a frame, you can then call this to print it.
window.frameName.print();
note the only drawback (and its a big one), is that this calls up the print dialog... not the print preview window... thus the user doesn't really get a chance to see what they are printing and/or scale it to fit their printer/paper.
I personally wish that all browsers would implement the following to handle the above issue.
window.printPreview();
Hope this will help !!!
Answer:
Just add "document.wright();" to print text.
Which of the following is not true about templates?
It incorporates formatting elements.
They slow down the process of creating presentations.
It incoprorates layout options.
It may include content that can be modified.
What will be the result from running the following program? print grades print 92 print 80print total print 92+80
Answer:
Grades
92
80
Total
92 + 80
Explanation:
When utilizing quotations, you enable to code to print what wrote, as it is. So, instead of adding the 92 + 80, it's printed out.
I hope this helped!
Good luck <3
For what purpose are high-level programming languages used for
1. Give control over the hardware to execute tasks quickly
2. Provide code that controls the computers hardware
3. Translate low-level programming languages into machine code
4. Write programs for general applications
Answer:
To speed up the compiler during run time
Explanation:
Write a MATLAB function named average_of_scores_with_drops The function will have two inputs and two return values. The first input will be a list of scores. The second input will be a postive integer representing the number of scores to drop. It will not be larger than the length of the list. Your function should determine the average of the scores after dropping the specified number of lowest scores. The first return value must be a real number equal to the average score. The second return value must be the number of items that were averaged. Notes: Example Test Case: SCORES
Answer:
-%Define the function.
function [avg, ele_left] = average_of_scores_with_drops(input_list, drop_element)
%Sort the list.
input_list = sort(input_list);
%Compute the length of the list.
len_list = length(input_list);
%Declare and initialize the variable.
sum = 0;
%Increase the element to be drop by 1.
i = drop_element + 1;
%begin the for loop.
for k = i : length(input_list)
%Add the elements.
sum = sum + input_list(k);
%End of the for loop.
end
%Compute the elements left after dropping the dropped element.
ele_left = length(input_list) - drop_element;
%Compute the average of the elements left.
avg = sum/ele_left;
%End of the function defined.
end
%Run the following code in the command prompt.
%Call the function and return the average
%score and the number of elements
%whose average is computed.
[average_score , number_of_items] = average_of_scores_with_drops([8 6 1 2 3 5 10], 2)
SAMPLE OF OUTPUT
average_score = 6.40000000000000
number_of_items = 5
Which of these browsers was the first widely adopted?
1. Internet Explorer
2. Chrome
3. Firefox
4. Netscape
Answer:
netscape
Explanation:
When performing actions between your computer and one that is infected with a virus, which of the following offers No risk of your computer becoming infected?
A. Printing to the same printer as infected computer
B. Accepting email attachments sent from an infected computer
C. Sharing Word documents with an infected computer
D. Sharing removable disks with an infected computer
Answer:
d
Explanation:
The correct option is D: Sharing removable disks with an infected computer
Removable disks are disks that use to keep data as well transfer data or information from one computer to another computer.
With Removable disks a computer infected with a virus cannot infect another Computer as the what the user does is to simply insert the USB port of the Removable disks into the computer which inturn enable the transfer of data to the computer to take place .
Learn more about Removable disks here:
https://brainly.com/question/4327670
The person who Oversee the direct work of employees and is responsible for the day-to-day tasks the employees complete is likely
Answer: Operational Manager
Answer: operational manager
Explanation: APEX
briefly explain the usage of the MS PowerPoint
Answer:
PowerPoint is a computer program that allows you to create and show slides to support a presentation. You can combine text, graphics and multi-media content to create professional presentations.
Answer:
Making your presentation more interesting through the use of multimedia can help to improve the audience's focus. PowerPoint allows you to use images, audio and video to have a greater visual impact. These visual and audio cues may also help a presenter be more improvisational and interactive with the audience.
Naseer has inserted an image into his document but needs the image to appear on its own line.
Which option should he choose?
•Top and Bottom
•Tight
•Through
•In front of text
Answer:
Top and Bottom
Explanation:
took the test
Answer: A
Explanation:
Which of the following could be defined as a general-purpose computing device that enables workers to create, manage, store, search for, and process information? MP3 player. Hard drive. Flash drive. Personal computer.
Answer:
It's personal computer
Explanation:
I got it right on my assignment
Which of the following is used to encrypt web application data?
a. MD5
b. AES
c. SHA
d. DHA
Answer:
b. AES
Explanation:
AES is an acronym for Advanced Encryption Standard and it is a cryptographic or symmetric block cipher that is based on a substitution-permutation network (SPN) used for the encryption of sensitive data over the internet or web. AES uses a key length of 128, 192 or 256 bits and a block length of 128 bits to encrypt data on web applications.
It is an encryption standard of the government of the United States of America and is supported by the National Institute of Standards and Technology (NIST).
Hence, AES is used to encrypt web application data and it uses an algorithm developed by Vincent Rijmen and Joan Daemen, known as the Rijndael algorithm.