Answers
Answer:
1. It will never run out
2. It’s better for the eviroment
Explanation:
1. Coal is not a renewable source and take along time for it to form so it will soon run out
2. Burning coal releases fossil fums into the air affecting the ozone layer but using solar power dose not release anything into the air
Answer:
Renewable energy works as clean sources of energy, and don't make as much of a detrimental impact on the environment as non-renewable energy. Air pollutants are a product of some non-renewable sources, and it negatively affects the atmosphere, humans, animals, and oceans.
Also, renewable sources won't run out, unlike other sources, as they are finite and will not last forever.
I hope this helped!
Related Questions
Pendulum In this task, you’ll make a pendulum and analyze its swing. a hand holding a swinging pendulum shown in three positions Estimated time to complete: 20 minutes You will need these materials: goggles golf ball (or similar size ball) plastic sandwich bag tape hole punch or scissors 1 foot of string metal lid or pan Stay safe! Always wear your safety goggles. Part A Place the ball in the plastic bag, and twist the top so the ball is secure in the bag. Wrap the twisted portion with tape so it stays tight. Use the hole punch or scissors to poke a hole in the part of the bag that’s above the ball. Slip an end of the string through the hole, and tie a knot. This is your pendulum. Hold the loose end of the string still with one hand. With the other hand, raise the ball in an arc so that it’s almost level with the hand holding the string. With the string taut, let the ball go. What do you observe? Font Sizes Characters used: 0 / 15000 Part B Why did the pendulum stop swinging? Where did the energy go? Font Sizes Characters used: 0 / 15000 Part C Scientists have organized all forms of energy into two types—kinetic and potential. Kinetic energy is the energy of motion, and potential energy is stored energy. At the top of its swing, does the pendulum have kinetic or potential energy? Font Sizes Characters used: 0 / 15000 Part D At the bottom of its swing, does the pendulum have kinetic or potential energy? Font Sizes Characters used: 0 / 15000 Part E Think about the process of raising the pendulum to one side and letting it go. For this event, create a list of each form of energy associated with the pendulum as it cycles. Font Sizes Characters used: 0 / 15000 Part F How could you give the pendulum more energy? Font Sizes Characters used: 0 / 15000 Part G Now raise the pendulum and let it hit a metal lid or pan. When the ball strikes the lid, what forms of energy can you identify?
Answers
Answer:
A: Place the ball in the plastic bag, and twist the top so the ball is secure in the bag. Wrap the twisted portion with tape so it stays tight. Use the hole punch or scissors to poke a hole in the part of the bag that’s above the ball. Slip an end of the string through the hole, and tie a knot. This is your pendulum. Hold the loose end of the string still with one hand. With the other hand, raise the ball in an arc so that it’s almost level with the hand holding the string. With the string taut, let the ball go. What do you observe?
Mine was swaying perfectly fine. after a little bit it gradually started swinging slower until stopped.
B: Why did the pendulum stop swinging? Where did the energy go?
gravity was pulling it towards the ground, however the weight and momentum of the ball helped it keep swinging for a good while.
C: Scientists have organized all forms of energy into two types—kinetic and potential. Kinetic [THE ENERGY OF MOTION IN A BODY] energy is the energy of motion, and potential energy [THE STORED ENERGY IN AN OBJECT] is stored energy. At the top of its swing, does the pendulum have kinetic or potential energy?
when its at the very top of the swing it does have a very small amount of time until it starts going back down again but during that time it is potential energy
D: At the bottom of its swing, does the pendulum have kinetic or potential energy?
the pendulum still has kinetic energy when it is the closest to the ground since it is still swinging
E: Think about the process of raising the pendulum to one side and letting it go. For this event, create a list of each form of energy associated with the pendulum as it cycles.
when its in my hand: potential energy
when it starts swinging: kinetic energy
when its going upwards: kinetic energy
when it stops swinging: potential energy
F: How could you give the pendulum more energy?
one way you could possibly make it have more energy is if you make the string longer
G: Now raise the pendulum and let it hit a metal lid or pan. When the ball strikes the lid, what forms of energy can you identify?
I could hear sound energy when the two made contact but for the most part it was kinetic energy
Answer:
I could hear sound energy when the two made contact but for the most part it was kinetic energy
Explanation:
SCIENCE<3:: will give brainliest! :)
Answers
Answer:
Option two
Explanation:
im smort
Answer:
I think it's B. there is a cold air mass pushing warm air mass up and replacing it over San Francisco
1.
Which type of tide would result from this arrangement of the Sun, Moon and Earth? ________
2. How are Spring Tides different from Neap Tides? Give at least 2 reasons ________
3. Which phase of the moon comes after the one shown in the diagram below? _______
4. Which type of tides has very large high tides and very small low tides? _________
5. Which of these models shows the position of the sun moon and Earth that will have the
LARGEST effect on the tides? _________
the first picture is for number 1
the second on is for 3
the third is for 5
Please do this for everyone that needs it
Answers
Answer:
1. High Tide
2. I don't know
3. Waning Crescent
4. Spring Tides
5. I don't know
Explanation:
Answer:
1.neap tide
2.spring tides occur when the earth and the sun are in line with the new or full moon
3.first quarter
4.spring tides
5. its the diagram G
Explanation:
What are some ways scientists can study the seafloor?
Answers
Answer: A device records the time it takes sound waves to travel from the surface to the ocean floor and back again. Sound waves travel through water at a known speed. Once scientists know the travel time of the wave, they can calculate the distance to the ocean floor.
Explanation:
What’s the difference between mechanical and chemical weathering
Answers
Answer:
Mechanical weathering is the physical breakdown of rock into smaller pieces. Chemical weathering is the breakdown of rock by chemical processes.
Explanation:
Mechanical weathering (also called physical weathering) breaks rock into smaller pieces. These smaller pieces are just like the bigger rock, just smaller. That means the rock has changed physically without changing its composition. The smaller pieces have the same minerals, in just the same proportions as the original rock.
Chemical weathering is the other important type of weathering. Chemical weathering is different from mechanical weathering because the rock changes, not just in size of pieces, but in composition Chemical weathering works through chemical reactions that cause changes in the minerals.
What are the rows on the periodic table called? What are the columns called? What do you know about elements in the same group?
Answers
Answer:
Rows are called periods, columns are called groups or families, and elements in the same group have the same number of valence electrons and often show similar properties and reactivity.
Explanation:
help please ill give brainly and heart !!!!
what type of system hurricanes need to form?
A ) High pressure
B ) Jet stream
C ) Low pressure
D ) Cool Dry Air
Answers
Answer:
The answer is A ) High pressure
I hope this helps you :)
please let me know if I am wrong
Small pieces of sand hitting the side of a mountain and weathering the rock is an example of what type of weathering?
Answers
Answer: This is MECHANICAL type of weathering.
Explanation:
Weathering is defined as the process by which rocks breakdown into smaller quantities due to different atmospheric and biological activities.
There are different types of weathering which include:
--> MECHANICAL WEATHERING: This type of weathering is also called physical weathering. Here, rocks are being broken down into smaller pieces but the mineral composition of the rock remains the same. This type of weathering can occur in two ways:
• By Ice wedging: this is one of the easiest ways rocks can be broken into smaller pieces. It occurs at the earth polar regions (climate that regularly cycles above and below the freezing point) and in areas of higher elevations such as the mountains. Ice wedging of rocks occurs when water seeps into cracks, it freezes and expands. This results in wedging (splitting) the rocks apart with repeated freezing.
• By Abrasion: this is another form in which mechanical weathering occurs. Abrasion occurs when strong winds carrying pieces of sand sandblast mountain surfaces. Also moving water, gravity, biological activities can cause abrasion of rock surfaces leading to its weathering.
Therefore, small pieces of sand hitting the side of a mountain and weathering the rock is an example of mechanical weathering by abrasion.
A 15 W electric shaver is used for 3 minutes. How much energy does it use in joules?
Answers
Change in E=p*t
=15*3
=45
The answer is 45J.
Which of these is a unique use of gamma radiation?
A. Detection of thyroid cancer
O B. CT scanners
C. Smoke detectors
D. Killing bacteria
SUBMIT
Who knows
Answers
Answer:
the answer would be 'd'
Explanation:
im really good at this stuff
The unique use of gamma radiation is Killing bacteria. The correct option is D.
What is gamma radiation?Gamma radiation is a type of electromagnetic radiation that is highly energetic and has no mass or charge. It is the most penetrating form of radiation and is often emitted during radioactive decay or nuclear reactions. Gamma rays have the shortest wavelengths and highest frequencies in the electromagnetic spectrum, ranging from about 0.1 nanometers to 10 picometers in wavelength. They can cause ionization in matter, meaning they can knock electrons out of atoms or molecules, making them highly damaging to living tissue. Gamma radiation is commonly used in medical imaging and cancer treatment, as well as in industrial applications for sterilization and food preservation.
Here in the Question,
Option A. Detection of thyroid cancer: Gamma radiation is used in medical imaging techniques such as PET scans and SPECT scans to diagnose cancerous conditions, but it is not unique to the detection of thyroid cancer.
Option B. CT scanners: Gamma radiation is not used in CT (computed tomography) scanners. CT scanners use a series of X-rays to produce detailed images of the inside of the body.
Option C. Smoke detectors: Smoke detectors use a small amount of radioactive material, typically americium-241, to ionize air particles and detect the presence of smoke. While gamma radiation is a type of ionizing radiation, smoke detectors do not use gamma radiation specifically.
Option D. Killing bacteria: Gamma radiation is used in the food industry to kill bacteria and sterilize food products, such as spices, meat, and poultry. This is a unique use of gamma radiation, as it relies on its ability to destroy microorganisms at high doses while leaving no residual radiation.
Therefore, The correct answer is option D i.e Killing bacteria.
To learn more about Electromagnetic radiation click:
https://brainly.com/question/10759891
#SPJ2
A student is sitting in a chair and not moving, however, there are forces acting on her. What must be trust about the forces acting on the student?
Answers
Answer: It is trusted that the sum of all forces acting on the student, adds up to zero the student is not moving.
Explanation: the plane they give you that the plane is moving at a constant velocity of 250 m/s this means that the acceleration is zero, we substituted in the formula F=ma which will give us the Force. And knowing that its constant speed, forward force is then equal to the Air resistance. Hence we find the Air resistance force
Water can be found in solid, liquid, and gaseous states. Which two processes would result in water changing to water vapor (or steam) when boiled?
deposition and condensation
evaporation and deposition
sublimation and evaporation
condensation and melting
Answers
Answer:
sublimation and evaporation
Explanation:
evaporation is from liquid to gas and sublimation is solid to liquid, as water vapor is a gas both of these methods could be used
Can someone please give me this answer to this please
Answers
.
A .63 kg ball is moving at 4.3m/s. What is the momentum of the ball?
Answers
Answer:
Given Mas (m) =63kg
velocity (v) =4.3m/s
momentum (p) =?
p=mv
63kgx4.3m/s
270.9kg.m/s
the momentum =270.9kg.m /s
If a ball of mass 0.63 kilograms is moving at 4.3 meters/seconds, then the momentum of the ball would be 2.709-kilogram meters/second.
What is momentum?It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle.
Momentum = mass of the object × velocity of the object
As given in the problem we have to calculate the momentum of the ball if it has a mass of 0.63 kilograms and moving with a speed of 4.3 meters/seconds,
The momentum of the ball = 0.63× 4.3
=2.709 kilogram meters/second
Thus, the momentum of the ball comes out to be 2.709-kilogram meters/second.
To learn more about momentum from here, refer to the link;
brainly.com/question/17662202
#SPJ2
A boy pushes a 50 kilogram wagon with a force of 4 N east while an orangutan pushes the wagon
with a force of 4 N west. What is the resulting acceleration of the wagon?
Answers
A small difference between means may not be statistically significant, but it could reach statistical significance with a large sample becausea) As N increases, the standard error gets smaller, reflecting less variability in sample means, which allows greater sensitivity to detect small but significant differences.b) As N increases, distributions get more heterogeneous, allowing small differences to be detected.c) The overlap between distributions grows as sample size increases.d) The difference between means gets larger as sample size increases
Answers
Answer:
Increasing the sample size could make a small difference between means reach statistical significance because;
a) As N increases the standard error gets smaller reflecting less variability in sample means, which allows greater sensitivity to detect small but significant differences
Explanation:
The p-value of a test statistic is used to express the level of significance of the test result. A significant result is typically considered as one with a small p-value of less than or equal to 0.05 at which point we reject the null hypothesis
The p-value can be made smaller by either
1) Increasing the size of the sample (N)
2) Decreasing the standard error
3) Increasing the difference between the hypothesized parameter and the statistic of the sample
The standard error, SE, is given as follows;
[tex]SE = \dfrac{\sigma}{\sqrt{N} }[/tex]
Where;
σ = The standard deviation of the sample
n = The sample size
Therefore the standard error decreases, gets smaller, with increasing sample size, N
Therefore, the small difference between the sample mean could reach statistical significance with a large sample because as N increases the standard error gets smaller reflecting less variability in sample means, which allows greater sensitivity to detect small but significant differences.
GIVING BRAINLIEST IF YOU ANSWER CORRECTLY!! (20 pts!!)
Answers
Answer:
c 1386J
Explanation:
You use the formula MCΔT where m is mass, C is specific heat, and delta t is change in temperature
A business jet of mass 24000kg takes off when the thrust for each of two engines is 34000N. Find the acceleration.
Answers
Answer:
1.42 m/s²
Explanation:
From the question,
F = ma.................... Equation 1
Where F = force, m = mass of the jet, a = acceleration of the jet
make a the subject of the equation
a = F/m................. Equation 2
Given: F = 34000 N, m = 24000 kg
Substitute into equation 2
a = 34000/24000
a = 1.42 m/s²
A hot air balloon traveled 4 hours at a speed of 200 km/hr. What distance did it travel?
Answers
4 hours * 200 km/hour
200 km to miles: 124.274
4 * 124.274 = 497.096 miles
can a body have zero velocity and finite acceleration?Explain
Answers
Answer:
Kinda? Depends what the question is fully asking
Explanation:
Acceleration is a change in velocity. So I guess if the velocity of something is -2 m/s and its positively accelerating at a value of +1 m/s, then that means every second its velocity changes by +1m/s.
So that -2 m/s thing after one second will be going -1 m/s.
After another second it'll be going 0 m/s.
After another itll be going +1 m/s and so on.
So at one point for a brief moment, it can have an acceleration but be at 0 m/s velocity.
What is the weight of an astronaut with a mass of 75 kg on the moon? The gravitational field strength on the moon is 1.6 Nkg-1.
Answers
okay this is kinda easy
What is the gravitational field strength on the moon?
The Moon has a gravitational field strength of 1.6 N/kg.
What are the independent and dependent variables in a circuit?
Answers
Answer:
Ideal independent sources can be batteries, DC generators or time-varying AC voltage supplies from alternators.
current dependable
Explanation:
Like all planets, the planet Venus orbits the Sun in periodic motion and simultaneously spins about its axis. Just as on Earth, the time to make one complete orbit (i.e., the period of orbit) is what defines a year. And the time to make one complete revolution about its axis (i.e., the period of rotation) is what defines a day. The period of orbit for the Earth is 365.25 days and the period of rotation is 24 hours (1.00 day). But when these same values for Venus are expressed relative to Earth, it is found that Venus has a period of orbit of 225 days and a period of rotation of 243 days. So for Venus inhabitants, a day would last longer than a year! Determine the frequency of orbit and the frequency of rotation (in Hertz) on Venus. Ans: A marine weather station detects waves which are 9.28 meters long and 1.65 meters high and travel a distance of 50.0 meters in 21.8 seconds. Determine the speed and the frequency of these waves. Ans:
Answers
Answer:
a) F = 5.14 10⁻⁸ Hz, f = 4.76 10-8 Hz, b) v = 2.29 m / s, f = 42.5 Hz
Explanation:
a)This problem has two parts.
For the calculations relative to the planet Venus, we use that the period and the frequency are related
f = 1 / T
frequency of the orbit around the Sun
Let's reduce the period to the SI system
T = 225 days (24h / 1days) (3600 s / 1h) = 1.94 10⁷ s
F = 1 / 1.94 10⁷
F = 5.14 10⁻⁸ Hz
rotation frequency
T = 243 d = 2.1 107 s
f = 1 / T
f = 1 / 2.1 107
f = 4.76 10-8 Hz
b) give the data of some marine waves
the speed of the wave can be found with kinematics
v = x / t
v = 50.0 / 21.8
v = 2.29 m / s
If the wavelength is L = 9.28m
this distance is the distance between two consecutive ridges or valleys
λ / 2 = L
λ = 2L
λ = 2 9.28
λ = 18.56 m
the speed of the wave is
v = λ f
f = v /λ
f = 2.29 / 18.56
f = 42.5 Hz
What is the density of a substance of volume 3 m3and mass 9 kg?
Answers
Answer:
Density = 3 kg/m³
Explanation:
Given the following data;
Volume = 3m³
Mass = 9 kg
To find the density;
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the formula;
[tex]Density = \frac{mass}{volume}[/tex]
Substituting into the formula, we have;
[tex]Density = \frac{9}{3}[/tex]
Density = 3 kg/m³
Please sb help me fr
Answers
Answer:
I think it might be box 1. Hope this is right have a good day
me lo traduses plis no se ingles solo escribe lo que dice en la guia
During which moon phase do spring tides occur?
new moon and full moon
first quarter and third quarter
waxing gibbous and waning gibbous
waxing crescent and waning crescent
pls help it is on edge
Answers
Answer:
The Full Moon and New Moon
Explanation:
Where inside an atom are protons and neutrons located?
Answers
Answer:
They are located in the core
Explanation:
Answer:
Inside the nucleus.
Explanation:
There are three subatomic particles. Protons have a charge of 1+, a mass of 1amu, and are found in the nucleus. Neutrons do not have a charge, have a mass of 1amu, and are found in the nucleus. Electrons have a charge of 1-, have negligible mass, and can be found orbiting the nucleus in the electron cloud.
Someone help me extra points & brainlest
Answers
Answer:
75 m
Explanation:
A ____ changes mechanical energy into ____. A____changes electric energy into _____. _____changes the voltage of an
Answers
Answer:
An electric current into a magnetic field
Explanation:
:) please give a heart if this helped you in any way. ;O)
I walked my dog 100 meters North to the end of the block, and 50 meters East to the park. After the park, I walked 60 meters South to my friend’s house.
What is the total distance traveled?
Is the displacement of my journey scalar or vector?
Answers
Answer:
Explanation:
What is the total displacement of a student who walks 3 blocks east, 2 blocks north ... The displacement of the car at the end of this 1.0-second interval is ... Compared to the total distance traveled by the player, the magnitude of the ... Then she turns and walks 30. meters south to an art classroom. ... What is a scalar quantity?