plz help!!!!!!

This equation for the reaction when solid magnesium and solid lead (II) oxide are heated together is:

Mg(s)+Pb(s) => MgO(s)+Pb(s)

a)what does tell you about the position of lead in the reactivity series? explain your answer.
b)rewrite equation as an ionic equation ​

Answers

Answer 1

this shows that magnesium is higher in the reactivity series than lead.

I don't think there can be an ionic equation written because both components are in solid form and neither is in an aqeuos state.

Answer 2

Reactivity series is the progression of the metals based on the activity. In a reaction between magnesium and lead (II) oxide, it can be said that lead is at a lower position in the reactivity series.

What is reactivity series?

Reactivity series is the depiction of the metals in a decreasing order based on their ability to displace the other metal in the reaction. More reactive species are placed at the upper position, while the less reactive species are placed at the lower positions.

In the series, magnesium is placed at the upper part of the series and has high reactivity, whereas lead is placed at the lower level with low reactivity. hence, in the reaction, Mg replaces Pb and forms a bond with oxygen.

The reaction between magnesium and lead (II) oxide cannot be written in the ionic form as all the reactants and the products are in the solid state and not in an aqueous state.

Therefore, lead is at a lower level of reactivity series.

Learn more about the reactivity series here:

https://brainly.com/question/24866635

#SPJ5


Related Questions

hello:) I’m a little confused because the textbook says it forms water but the notes from my school says that it forms salt and water :/

Answers

Answer:

Yes, it form Salt and Water

What is the shape of a molecule of CH4?
O A. Trigonal-bipyramidal
O B. Bent
O C. Trigonal-pyramidal
O D. Tetrahedral

Answers

Answer:

D. Tetrahedral

Explanation:

the reason is because four electron pairs are distributed.

We learned about three career opportunities in the field of pulp and paper in class. Pick one career and find out the education, training, and experience required for this profession. Write about what you found and explain why this profession might interest you

Answers

Answer:

Pulp and Paper technology is a specialist field of chemical engineering which involves the study of the processes required for the conversion of raw materials such as wood, into pulp and paper products.

Paper and pulp manufacturing is a growing and dynamic industry so it requires a wide variety of personnel - from unskilled and semi-skilled workers to tradesmen, technicians and engineers - to control all the processes and develop new ones.

I choose to be a chemist in the field of paper and pulp. Requirements and compulsory Subjects: Physical Sciences, Mathematics, Engiineering and Technology.

Chemists are responsible for quality control and they study the influence of various chemicals on pulp and paper. Chemical and mechanical engineers develop new production methods.

I'll like to be a chemist in the field of paper and pulp because they perform the major role in the chemical properties of the paper and pulp.

Explanation:

Hope it helps.

Answer:

PLATO ANSWER

Explanation:

A reversible reaction has an equilibrium constant of 0.75. If the forward rate constant is 0.62 mol/L/s, what's the reverse reaction rate constant?
A. 0.910
B. 0.827
C. 1.010
D. 1.210

Answers

Answer: B.) 0.827

Explanation:

Given the following :

Equilibrium constant (k) = 0.75

Forward rate constant = 0.62 mol/L/s

Backward rate constant =?

The equilibrium constant denited as 'k' is the proportion of the forward rate constant and the reverse rate constant.

Mathematically,

K = [forward rate constant / Reverse rate constant]

k = 0.75 ; forward rate constant = 0. 62mol/L/s

0.75 = [ 0.62mol/L/s ÷ reverse rate constant]

Reverse rate constant * 0.75 = 0.62mol/L/s

Reverse rate constant = (0.62mol/L/s ÷ 0.75)

Reverse rate constant = 0.8266mol/L/s

Reverse rate constant = 0.827mol / L/s

Answer:

0.827

Explanation:

How many grams of NO are produced from 15.8 g of H2O

Answers

Answer:

26.33 g of NO.

Explanation:

We'll begin by writing the balanced equation to produce NO from H2O. This is given below:

5N2 + 6H2O —> 4NH3 + 6NO

Next, we shall determine the mass of H2O that reacted and the mass of NO produced from the balanced equation. This is illustrated below:

Molar mass of H2O = (2x1) + 16 = 18 g/mol

Mass of H2O from the balanced equation = 6 x 18 = 108 g

Molar mass of NO = 14 + 16 = 30 g/mol

Mass of NO from the balanced equation = 6 x 30 = 180 g

From the balanced equation above,

108 g of H2O reacted to produce 180 g of NO.

Finally, we shall determine the mass of NO produced by the reaction of 15.8 g of H2O.

This is illustrated below:

From the balanced equation above,

108 g of H2O reacted to produce 180 g of NO.

Therefore, 15.8 g of H2O will react to produce = (15.8 x 180)/108 = 26.33 g of NO.

Therefore, 26.33 g of NO were obtained from the reaction.

In this lab procedure, the ___ variable is the number of half-life cycles (time) and the ___ variable is the number (or fraction) of (radioactive) Lincolnium nuclei remaining at that time.

Answers

Answer:

Independent, Dependent

Explanation:

In the given lab procedure, the number of half-life cycles or the time in which the number of nuclei in radio-active substance turns into its half would be characterized as the 'independent' variable as it directly affects the dependent variable i.e. 'the number(or fraction) of Lincolnium nuclei remaining at that time.' The number of nuclei would be the dependent variable as it bears the change or effect of a change in the independent variable(half-life cycle).

Answer:

Its independent and dependent

Explanation:

On Edge 2021

How is alchemy different from modern chemistry?
O A. Alchemy experiments only with living things, and chemistry uses
chemicals
O B. Alchemy was practiced before Aristotle, and chemistry has been
popular since his death.
C. Alchemy is not scientific, but chemistry is based on evidence.
O D. Alchemy covers all areas of science, but chemistry covers only
matter.

Answers

The answer to this is C

Answer:

C. Alchemy is not scientific, but chemistry is based on evidence.

Explanation:

Alchemy was based on mystical beliefs instead of the scientific method.

Chemistry is the study of matter and change based on evidence.

In the equation 2KCIO3 → 2KCI + 302, how many moles of oxygen are produced when 12.61 mol of
KCIO3 decompose completely?
Select one:
O a. 19
Ob. 8.4
O c. 6.3
O d. 13

PLEASE I AM BEGGING PLEASE HELP ME

Answers

Answer:

A 19

Explanation:

2 mole of KClO3 produces 3 mole of O3

2 : 3

1 : 3/2

12.61 : 3/2 × 12.61

12.61 : 18.9

12.61 mole of KClO3 produces 18.9mole of O2.

A 13.00 g sample of citric acid reacts with an excess of baking soda as shown in the equation.
H3C6H507+3NaHCO3->3CO2+3H20+Na3C6H507
What is the theoretical yield of carbon dioxide? 0.993 g 2.98 g 3.65 g 8.93 g

Answers

Answer:2.98

Explanation:

Answer:

D) 8.93 g

Explanation:

In order from left to right, what are the coefficients (front numbers) needed to
balance the following equation? CzH6 + O2- CO2 + H20*​

Answers

Answer:

10CH6 + 10O2 → 10CO2 + 3H20

Explanation:

10) A hydrobromic acid (HBr) solution has a molar concentration of 0.0085 M. Calculate the
[H3O+], [OH-] and pH of the solution.​

Answers

Answer:

Explanation:

To find the [H3O+] of the solution, we can use the fact that HBr is a strong acid and completely dissociates in water. Therefore, the concentration of H3O+ is equal to the molar concentration of HBr:

[H3O+] = 0.0085 M

To find the [OH-], we can use the equation:

Kw = [H3O+][OH-]

Where Kw is the ion product constant for water, which has a value of 1.0 x 10^-14 at 25°C.

Rearranging the equation to solve for [OH-], we get:

[OH-] = Kw / [H3O+]

[OH-] = (1.0 x 10^-14) / (0.0085)

[OH-] = 1.176 x 10^-12 M

To find the pH of the solution, we can use the equation:

pH = -log[H3O+]

pH = -log(0.0085)

pH = 2.07

Therefore, the [H3O+] of the solution is 0.0085 M, the [OH-] is 1.176 x 10^-12 M, and the pH is 2.07.

Suggest why the colour of the copper sulfate solution fades during electrolysis.

Please help! Thank you:)

Answers

Answer:

The traces of hydrogen ions are not discharged, so you not see any gas bubbles collecting on the negative cathode electrode. The blue colour fades as more and more copper is deposited, depleting the concentration of the blue copper ion Cu2+ ions in solution.

Explanation:

Calculate the volume in liters of a 0.00183g / L mercury(1) chloride solution that contains 125 mg of (Hg 2 Cl 2 ) .

Answers

Answer: 68.3L

Explanation:

Density = Mass / Volume

Density =  0.00183 g/L

Mass = 125 mg =  0.125g

Volume =     Mass / Density  =  68.3L

Which of the following elements will not form a polar covalent bond with oxygen?

A. Hydrogen
B. Sodium
C. Oxygen
D. Fluorine

Answers

sodium will form an ionic bond

Answer:

C. Oxygen

Explanation:

Oxygen will not form a polar covalent bond with another oxygen atom because when 2 atoms of the same element bond, it is a nonpolar covalent bond.

Since they are the same element, the 2 oxygens have the same electronegativity and will share their electrons equally.

Polar covalent bonds involve 2 atoms that will share electrons unequally

One mole of any gas at room
temperature and pressure will
occupy liter(s).
A. 10
B. 1
C. 22.4
D. 24
Reset Selection

Answers

One mole of any gas at room temperature and pressure will occupy 22.4 liter(s) (option C).

What is an ideal gas?

Ideal gas is an hypothetical gas, whose molecules exhibit no interaction, and undergo elastic collision with each other and with the walls of the container.

One mole of an ideal gas contains a volume of 22.414 L at standard temperature and pressure (STP).

According to Avogadro's law, the volume occupied by one mole of a gas must be the same for all gases if the temperature and pressure are the same.

Learn more about ideal gas at: https://brainly.com/question/30236490

#SPJ1

1. Give IUPAC for the following compound

Answers

Answer:

Ethane

Explanation:

SERE
What type of energy is the sum of an object's potential and kinetic energy?
mechanical energy
electromagnetic energy
chemical energy
thermal enemy

Answers

Answer:

Mechanical energy

Answer:

Mechanical Energy

Explanation:

The mechanical energy is the sum of the objects potential energy (energy the object possess due to its position) and its kinetic energy (energy the object possess due to its motion). Adding this two energies together, gives the total mechanical energy.

The overall process of photosynthesis has the balanced chemical equation 6CO, +6H,0 CH.0, 60, What does this tell you about the relative amounts of carbon
dioxide and water consumed in this process?
A. For every six moles of carbon dioxide consumed, one mole of water is consumed
B. For every mole of carbon dioxide consumed, one mole of water is consumed
C. For every gram of carbon dioxide consumed, one gram of water is consumed
D. For every six grams of carbon dioxide consumed, one gram of water is consumed.

Answers

Answer:

(C)

Explanation:

Because of the physics of it.

According to the overall equation of photosynthesis as follows: 6CO2 + 6H2O = C6H12O6 + 6O2, for every mole of carbon dioxide consumed, one mole of water is consumed.

What is photosynthesis?

Photosynthesis is the process by which plants and other photoautotrophs convert light energy into chemical energy.

Photosynthesis makes use of carbon dioxide and water to produce glucose and oxygen as follows:

6CO2 + 6H2O = C6H12O6 + 6O2

This chemical equation suggests that for every mole of carbon dioxide consumed, one mole of water is consumed.

Learn more about photosynthesis at: https://brainly.com/question/1388366

#SPJ6

In the past mining companies were not made responsible for the clean-up of any of
the mine sites. As a result, abandoned mines had a severe impact on the
environment in Ontario. Which of these is not a result of these mining practices?
a)
Chemical reactions producing sulphuric acid decrease soil and water ph in the
area.
b)
Acid leaching dissolves metals found in the soil thus allowing them to enter
the water system.
c)
Heavy metals which are left tailing ponds can dissolve and enter the water
system.
d)
Old and inefficient mining smokestacks contaminate the soils around
abandoned mine sites.

Answers

D because it was abandoned

Find the 5 number summary for the number of chapters in the Old Testament. (Recall that the 5-number summary is the minimum, lower quartile, median, upper quartile, and maximum.)

Answers

Hey, I am doing this project right now too. Did you end up figuring out the answer to this? I do not understand this at all. Message me back pls!

You would expect magnesium to be most similar in properties to
A. silicon.
B. calcium.
C. potassium.
D. sulfur.

Answers

Answer:

Calcium

Explanation:

"Calcium is a mineral that is necessary for life. In addition to building bones and keeping them healthy, calcium enables our blood to clot, our muscles to contract, and our heart to beat. About 99% of the calcium in our bodies is in our bones and teeth. "

Answer:

Calicum

Explanation:

DID THE TEST AND GOT IT RIGHT!!!

When dissolved in water, an acid or a base breaks down into a proton and an electron. two negative ions. a positive and a negative ion. a positive ion and a proton.

Answers

Answer:

got c

Explanation:

When dissolved in water, an acid or a base breaks down into a positive and a negative ion.

What is an acid-base reactions?

An acid–base reaction is a chemical reaction that occurs between an acid and a base. Acid-base reactions can be used to determine pH.

When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge, whereas, bases,  when dissolved in water yield hydroxide ions (OH-).

If a solution has a high concentration of H+ ions, then it is acidic whereas the solution having high concentration of OH- ions, called as  basic.

Thus, from above , it is clear that when dissolved in water, an acid or a base breaks down into a positive and a negative ion.

Learn more about, acid-base reactions here; https://brainly.com/question/15833967

#SPJ6

Like DNA, RNA contains four nitrogenous bases.
Three of them are the same as those found in
DNA. The one that is different is called
The five-carbon sugar in RNA is called

Answers

Answer:

 Uracil,   Ribose

Explanation:

The Nitrogenous base found in RNA that is not found in DNA is called Uracil.

While the five-carbon sugar in RNA is called Ribose.

Answer:

Uracil and then Ribose

Explanation:

Explain the difference between the way a molecule (which does not ionize) dissolves and an ionic compound dissolves, using sugar water and salt water as an example

Answers

Answer:

The molecules (which do not ionize) dissolves in water depends on the polarity of molecules while the ionic compounds that dissolve in water depend on the electric charge of the compound.

For example sugar dissolves in water because of the polar nature of sugar which releases energy and form intermolecular bonds with the polar water molecules.

While salt dissolves in water as salt has a net electric charge that attracted by the oppositely charged ions present in the water. The attractive force between salt and water is stronger than sodium and chloride and allow salt to dissolve in the water.

Calculate the heat of reaction, ∆H°, for the following:

3FeCl2(s) + 4H2O(g)  Fe3O4(s) + 6HCl(g) + H2(g)

Answers

Answer:

562.76 kJ

Explanation:

∆H° (kJ) is the total of the heats of formation of the products minus the  total of the heats of formation of the reactants.  

NB: look up the  heats of formation of the compounds in the heats of formation reference tables, it is found at the back of most chemistry text

heats of formation of the products (i.e.  Fe₃O₄(s) , 6HCl(g) , H₂(g) ) = -1120.9 + 6(-92.3)+ 0 = -1674.7 kJ

heats of formation of the reactants (i.e.  3FeCl₂(s) , 4H₂O(g) ) =3(-423.42) + 4(-241.8) = -2237.46kJ

∆H° = -1674.7 kJ - (-2237.46kJ) =562.76 kJ

Plants can only
cause mechanical weathering.
Please select the best answer from the choices provided
OT
OF

Answers

Answer:

Ice wedging, pressure release, plant root growth, and abrasion can all cause mechanical weathering. in the cracks and pores of rocks, the force of its expansion is strong enough to split the rocks apart. This process, which is called ice wedging, can break up huge boulders.

Answer:

f

Explanation:

The pH of a substance can only be determined when it is
a) dried in a powder
b) frozen
c) dissolved in water
d) heated

Answers

The pH of a substance can only be determined when it is
a) dried in a powder
b) frozen
c) dissolved in water
d) heated



It’s frozen
B

The pH of a substance can only be determined when it is frozen. Hence, option B is correct.

What is pH?

pH stands for Hydrogen potentials.

The use of the pH scale is one practical way of quantitatively determining how acidic something is.

If the pH of a solution is less than 7, it is acidic. If the pH is 7, the solution is neutral and if the pH is greater than 7,the solution is basic.

The pH of a substance can only be determined when it is frozen. Hence, option B is correct.

Learn more about the pH here:

https://brainly.com/question/874715

#SPJ2

At a certain temperature, Ke = 3 for the reaction NO3(g) NO(g) + O2(g) Find the direction of thereaction if at some point in time in a 1.0 vessel the following respective concentrations were measured; [NO] = 2.0 mol/L, [O2] = 1.0 mol/L and NO3(g) = 0.75 mol/L.

Answers

ScienceDirect is Elsevier's platform of peer-reviewed scholarly literature. It includes thousands of books, journal articles, and other reference materials.

In what way does the shape of a molecule affect how the molecule is involved with living systems?

A. It determines the weight of a molecule

B. it determines what elements are in a molecule

C. it determines oxidation states present in a molecule

D. it determines how the molecule functions ​

Answers

In what way does the shape of a molecule affect how the molecule is involved with living systems?

A. It determines the weight of a molecule

B. it determines what elements are in a molecule

C. it determines oxidation states present in a molecule

D. it determines how the molecule functions

It should be d

There are two characteristics of molecules, one is geometry and other is shape. Shape is excluding lone pair surrounding the central element and geometry is including the lone pair. Therefore, the correct option is option D.

What is VSEPR theory?

VSEPR stands for valence shell electron pair repulsions. VSEPR theory is used to predict the shape and geometry of molecules on the basis of valence electrons pairs that are present around the central element of the molecule.

According to VSEPR theory, Lone pair lone pair repulsion is greater than bond pair bond pair repulsion. There are so many limitations of VSEPR theory. There is a repulsion between bond pair electrons and lone pairs present on the central element.  The shape of a molecule affect how the molecule is involved with living systems as it determines how the molecule functions.

Therefore, the correct option is option D.

To know more about VSEPR theory, here:

https://brainly.com/question/19582124

#SPJ2

I really need help!!!
look at the three chemical equations below. How many atoms of each element are in reactants? How many atoms of each element are in the products?
2H2 + O2➔ 2H2O
2Fe203➔ 4Fe+ 3O2
CI2+ 2NaBr➔ 2NaCI+ Br2

Answers

Line one: 4h atoms and 2o atoms on reactant and product side.
Line two: 4fe atoms 6o atoms on reactant and product side.
Line three: 2cl atoms, 2na atoms and 2br atoms on both the reactant and product side.
Other Questions
What is the domain and range ? The National Safety Council (NSC) estimates that off-the-job accidents cost U.S. businesses almost $200 billion annually in lost productivity (National Safety Council, March 2006). Based on NSC estimates, companies with 50 employees are expected to average three employee off-the-job accidents per year. Answer the following questions for companies with 50 employees.a. What is the probability of no off-the-job accidents during a one-year period (to 4 decimals)?b. What is the probability of at least two off-the-job accidents during a one-year period (to 4 decimals)?c. What is the expected number of off-the-job accidents during six months (to 1 decimal)?d. What is the probability of no off-the-job accidents during the next six months (to 4 decimals)? Which graph represents the solution set of the system of inequalities?y < 2/3xY>-x+2 What is a number of subsets for the set which contains the 10 elements. Why does the pattern recognition strategy affect prokaryotic and eukaryotic pathogens as well as hosts At what speed would a 3.00 x 10^4 kg airplane have to fly and with a momentum of 1.60 x 10^9 kg.m/s A class of 30 music students includes 13 who play the piano, 15 who play the guitar, and 9 who play both the piano and the guitar. How many students in the class play neither instrument? Refer the attached photo 15. Find the lengths of major and minor arcs AB correct to the tenth of a cm. The minorarc AB has a central angle which measure 85.(3marks)859 Find the remainder when f(x)=2x3x2+x+1 is divided by 2x+1. help please :)))))))) what is 3/5 of 1800 A particle located at the position vector m has a force N acting on it. The torque about the origin is I need help for this question Im stuck In the photoelectric effect, if the intensity of light shone on a metal increases, what will happen? The two-way table shows the medal count for the top-performing countries in the 2012 Summer Olympics. A 5-column table has 5 rows. The first column has entries United notes, China, Russia, Great Britain, Total. The second column is labeled Gold with entries 46, 38, 24, 29, 137. The third column is labeled Silver with entries 29, 27, 26, 17, 99. The fourth column is labeled Bronze with entries 29, 23, 32, 19, 103. The fifth column is labeled Total with entries 104, 88, 82, 65, 339. Which statement is true? Please help with spanish questions! Please and thank you Energy is released from ATP when every phosphate bond is broken. the last phosphate bond is broken. all three phosphate bonds are formed. the last phosphate bond is formed. How do I solve this problem Find sets of parametric equations and symmetric equations of the line that passes through the two points (if possible). (For each line, write the direction numbers as integers.) (0, 0, 25), (10, 10, 0)