Answer:
6,3,2
Explanation:
Fe2(SO4)3 + 6 KOH = 3 K2SO4 + 2 Fe(OH)3
Which system is responsible for the production of red blood cells?
hormone erythropoietin (EPO) is responsible for the production of red blood cells.
Glucose is produced through the process of photosynthesis
and is shown below. How many atoms of hydrogen are
present in one molecule of glucose?
6
3
12
24
As shown in the picture, the chemical formula for glucose is C6H12O6. This means that there are 6 carbons, 12 hydrogens and 6 oxygens in one molecule of glucose.
Your Answer: 12
Is the reaction above a replacement reaction? Explain.
(Help would be greatly appreciated, chemistry is not my strong suit) How many moles of NaCl are present in a solution with a molarity of 8.59M and 125mL of a solution?
1. 1.07g
2. 62.7mol
3. 1.07mol
4. 62.7g
Molarity is a unit of concentration defined as the number of moles of solute (the substance being dissolved) per volume of solution (the solvent in which all the solute is dissolved). Mathematically, molarity is expressed as
[tex]M = \frac{\text{ mol solute}}{\text{ L solution}}[/tex].
In this question, we are given the molarity and the volume of a solution of NaCl. We can use this information to calculate the number of moles of NaCl present in the solution. Rearranging the equation to solve for moles of solute, we multiply the molarity by the volume of the solution (the units for volume must be in liters, so 125 mL is expressed as the equivalent 0.125 L):
[tex](8.59 \text{ M})(0.125 \text{ L}) = 1.07 \text{ moles of NaCl}.[/tex]
The question asks for the number of moles of NaCl in this solution, so number 3 would be correct.
Find the volume of 2.40 moles of gas whose temperature is 50.0°C and whose pressure is 2.00 atm.
blank a long narrow Stepside value that forms the deepest part of the ocean
Answer:
The answer is a trench
How much sugar can be dissolved of the 0.3 ml of water is heated to 1000C?
A horse weighs 240 kg. If its running at a speed of 18 m/s, what's the linear momentum of the horse
Answer: The answer is 4320
Explanation:
I got the answer correct
How much heat is needed to warm 250g of water from 22℃ to 98℃?
Answer:
Thus, the required heat is 79kJ 79 k J .
Explanation:
i think its the right bottem one
Give two examples of elevation.
Answer:
An example of elevation is a plane flying at 36,000 feet above the ground. An example of elevation is a pope being raised to the position of saint. An example of elevation is a ballet dancer leaping three feet in the air. ... At 8,850 m (29,028 ft), the summit of Mount Everest is the highest elevation on Earth.
Explanation:
please mark me brainly!
As the moon orbits the ______________, its gravitational pull is______________ on the side of the earth closest to the ______________.This ______________ force pulls on the water facing the moon,creating a ______________. The moon also ______________ on the solidearth, causing the water on the far side of earth to ______________as well. These bulges in the water are the ______________.The areas in between the close and far side of the earth which are not in ______________ with the moon experience ______________.
pls help i give brainlyest
Answer:
Earth
Strongest
Moon
Gravitational
Tide
Pulls
Bulge
Waves
Proximity
Low Tide
High-speed winds transfer more energy to the ocean’s surface, creating bigger waves.
Question 10 options:
True
False
Answer:
I think that would be true. The faster the wind, the longer it blows, or the farther it can blow uninterrupted, the bigger the waves. Therefore, a wave's size depends on wind speed, wind duration, and the area over which the wind is blowing
Answer: True.
Explanation: Yes, waves get energy from the wind through friction, so you see those waves get bigger each time. The longer the winds blows, the more friction, and energy it's getting, meaning better, and deadly waves. The wind can sometimes cause tsunamis if the its blowing too hard.
Compare the seasons on Titan to the seasons on Earth.
What happens when dilute sulphuric acid is poured on a copper plate?
Calculate the number of moles in 3.440 x 10^35 formula units of RbF. (Molar mass of RbF is 104.47g/mol).
Explain what a convection current is and how it causes winds in the atmosphere.
On the periodic table, what is a group? For the main groups, what characteristic
do the elements have in common?
Answer:
The s-, p-, and d-block elements of the periodic table are arranged into 18 numbered columns, or groups. The elements in each group have the same number of valence electrons. As a result, elements in the same group often display similar properties and reactivity.
Explanation:
On the periodic table, a group refers to a vertical column of elements that share similar chemical properties.
For the main groups, the characteristic do the elements have in common is valence electron configuration and chemical reactivity.
On the periodic table, a group refers to a vertical column of elements that share similar chemical properties. These elements are arranged in such a way that they have the same number of valence electrons, which are the electrons in the outermost energy level (shell) of their atoms. The number of valence electrons is a critical factor in determining the chemical behavior and reactivity of elements, as it governs their ability to form chemical bonds with other elements.
Main group elements, also known as representative elements, are located in the s-block and p-block of the periodic table. These elements are found in Groups 1, 2, and 13 to 18. Each main group is labeled with a number from 1 to 18.
Here are the main characteristics that elements in the same main group (vertical column) have in common:
1. Valence Electron Configuration: Elements in the same main group have identical valence electron configurations. For example, elements in Group 1 (alkali metals) all have one valence electron in their outermost energy level (ns¹), while elements in Group 18 (noble gases) have a full outermost energy level.
2. Chemical Reactivity: Due to their identical valence electron configuration, elements in the same group show similar chemical reactivity. They tend to form similar types of chemical bonds and react similarly with other elements to achieve a more stable electron configuration.
3. Periodic Trends: Main group elements within a group exhibit predictable trends in their physical and chemical properties as you move from the top to the bottom of the group. For example, the atomic radius tends to increase, ionization energy tends to decrease, and metallic character tends to increase as you go down a group.
To know more about periodic table here
https://brainly.com/question/28747247
#SPJ2
Which group of microorganisms has the ability to mutate?
Hi! I need some help with this pleaseeee!!
When two objects of different temperatures are placed in contact with one another, eventually: (choose one option from below)
a) both their average kinetic energy and temperature will be the same
b) their average kinetic energy will be the same
c) neither their average kinetic energy and temperature will be the same
d) their temperature will be the same
Name the type of light interaction feeling hotter in a black shirt than a white shirt
1. Reflected
2. Absorbed
3. Transmittied
Single-celled organisms need a microscope to be seen...
O True
O False
Answer:
True
Explanation:
Microscope is an instrument which is used to observe small objects. There are many types of microscope with a different magnitude.
1. What two types of cells contain chloroplasts?
Answer:
plant cells and eukroyatic algae
What must be happening to the forces of attraction between particles when a change of state occurs?
Answer:
The particles need energy to overcome the attractions between them. As the liquid gets warmer more particles have sufficient energy to escape from the liquid. Eventually even particles in the middle of the liquid form bubbles of gas in the liquid.
Which type of bonding forms due to electrical attractions between oppositely charged elements
Answer:
Explanation:
Ionic bond
Ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound.
i really need help, this is important to me, if not i get my harry styles tickets taken away and if that happens my life is over lol, i’m not saying it for sympathy i just REALLY need help
Explanation:
First Question
Group 18 elements. This is because the noble elements do not conduct electricity.
Second Question
Chewing in the mouth breaks food into small pieces
Third Question
How many atoms of each element are present in the molecule?
7 carbon atoms, 14 Hydrogen atoms and 1 oxygen atom
Hey. Answers to this?:
I set off on a journey from the Earth to our nearest galaxy - ________. It will take me around 2 million ______ ______ before I reach my destination. As my space shuttle ascended it went through the Earth’s atmosphere in a great display of glowing lights. I reached the _______ __________ zone and started to float in my cockpit. The spacecraft went farther away, making the Earth look much smaller. I saw the bright light of our ________ _________ - the Moon. I speeded up, crossing the orbit of our ________ _______ - Mars. It took a great deal of skill to safely manoeuvre my spacecraft through the area of giant, rocky pieces of cosmic rubble, known as an _____ ______. As I accelerated, I entered the region of our ________ _______. I went zooming past Jupiter, Saturn and ________. I took a glimpse of our poor demoted dwarf planet - _______. Eventually, I was far enough to reach the outer edges of our ______ _______, with our star _________ in the centre. From that point on I accelerated rapidly, zooming out of our galaxy - ________ _____. What a spectacular view it was to see all the ____ ______ stars spinning in a giant whirlpool of light. Soon I reached the outer edges of our galaxy and went zooming away through the unknown towards Andromeda.
Missing words: the Sun, natural satellite, Uranus, asteroid belt, the Milky Way, outer planets, light years, Pluto, 400 billion, the Andromeda, inner planet, Solar System, zero gravity,
A 3.56 L balloon is compressed to 1.00 L at constant temperature. If the initial pressure in the balloon was 101.3 kPa, what is the final pressure?
Calculate the number of moles that are in 2.0 L of a 0.75 M solutions of NaCl
Answer:
1.5
Explanation:
0.75M=Moles/2L
When you push or pull something, you are creating
force but could be tension
I’ll really appreciate it if you help me out on this one .
Answer:
3) All the animals and plants in a desert
4) Species becoming extinct