Answers
Answer:
B, A, E, D, C
Explanation:
If the arrow points to the right, then the force is positive.
If the arrow points to the left, then the force is negative.
Also, remember that the force does not relate (necessarily) to the mass, so the different blocks having different masses is not an important factor in this problem.
Let's find the force in each block.
A)
Here we have a positive force of 3N and a negative force of 1N
Then the net force (the sum of all the forces) is:
F = 3N - 1N = 2N
B)
Here we have two positive forces, one of 1N and other that I cant see, I guess that it is 3N
Then the net force is:
F = 1N + 3N = 4N
C)
Here we have two negative forces of 2N
Then the net force is:
F = - 2N + ( - 2N) = -4N
D)
Here we have a single force of 2N that is negative, then the net force is:
F = -2N
E)
Here we have a negative force of 3N and a positive force of 2N
then the net force is:
F = -3N + 2N = -1N
Then, the order of greatest to least (from positive to negative) is:
B, A, E, D, C
Related Questions
A blow-dryer and a vacuum cleaner each operate with a voltage of 120 V. The current rating of the blow-dryer is 14 A, while that of the vacuum cleaner is 4.2 A. Determine the power consumed by (a) the blow-dryer and (b) the vacuum cleaner. (c) Determine the ratio of the energy used by the blow-dryer in 16 minutes to the energy used by the vacuum cleaner in 43 minutes.
Answers
Answer:
The correct solution is:
(a) 1680 W
(b) 504 W
(c) 1.240
Explanation:
The given values are:
Voltage,
V = 120 V
Current of blow dryer,
I₁ = 14 A
Current of vacuum cleaner,
I₂ = 4.2 A
Time,
t₁ = 16 min
t₂ = 43 min
As we know,
⇒ [tex]Power (P) = VI[/tex]
(a)
For blow dryer:
⇒ [tex]P_1=V\times I_1[/tex]
[tex]=120\times 14[/tex]
[tex]=1680 \ W[/tex]
(b)
For Vacuum cleaner:
⇒ [tex]P_2=V\times I_2[/tex]
[tex]=120\times 4.2[/tex]
[tex]=504 \ W[/tex]
(c)
The ratio will be:
= [tex]\frac{Blow \ dryer \ energy}{Vacuum \ cleaner \ energy}[/tex]
= [tex]\frac{P_1\times t_1}{P_1\times t_2}[/tex]
= [tex]\frac{1680\times 16}{504\times 43}[/tex]
= [tex]\frac{26880}{21672}[/tex]
= [tex]1.240[/tex]
Two forces of 8N and 10N CANNOT give a resultant of
a. 1 N
b. 2 N
c. 9 N
d. 18 N
Answers
Answer:
I believe it is D
forgive me if I'm wrong
The energy principle states that:
Energy can be destroyed.
Energy can be created.
Energy cannot be created or destroyed.
Energy cannot be created, but it can be destroyed.
brainleist to correct answer
Answers
I hope that helps
The energy principle states that:
[tex]\sf\purple{Energy \:cannot \:be \:created \:or\: destroyed.✅}[/tex]
Law of conservation of energy or the first law of thermodynamics states that energy can neither be created nor destroyed; it can only be transferred or changed from one form to another.[tex]\large\mathfrak{{\pmb{\underline{\orange{Happy\:learning }}{\orange{.}}}}}[/tex]
please help with this question
Answers
Answer:
This unbalanced force causes her to change in direction.
If the forces on an object are unbalanced, this is what happens:
a stationary object starts to move in the direction of the resultant force
a moving object changes speed and/or direction in the direction of the resultant force
A TV has a power of 65 watts and an efficiency of 70 percent. How much
power is wasted as heat?
A. 19.5 W
B. 2.2 W
C. 0.9 W
D. 45.5 W
Answers
Power of TV = 65Watt
If Efficiency = 70%, then the percentage of energy wasted is 30%
So, the amount of energy getting wasted:
= 30/100 × 65
= 1950/100
= 195/10
= 19.5 W
G.P.E = weight (n) x height (m). 2 identical twins are skiing down 2 different slopes. one is 1000m high, the other is 1500 m high. the twin at 1000m weighs 150 N. the other twin weighs 100 N. which twin has the most P.E before they begin skiing?
Answers
Answer:
I don't know i really I'm sorry I wish I could help
Suppose that Joe and Jim are twins and :
________________________________
Joe :
Height = 1000 m
==》 PE = 150 × 1000
Weight = 150 N
==》 PE = 150,000 j
_________________________________
Jim :
Height = 1500 m
==》PE = 100 × 1500
Weight = 100 N
==》PE = 150,000 j
______________________________
As u can see Joe and Jim has equal PE before they begin skiing .
The Keck Observatory is home to the largest Earth-based twin telescopes. The telescopes are located away from city lights, above the clouds where the atmosphere is clear, calm, and dry. In 1999, additional steps were taken to help the telescopes overcome any distortions caused by changes in the atmosphere by adding a laser sighting system. Now, the Keck telescopes can probe distant galaxies and capture images with more detail than even the Hubble Space Telescope. Scientists can now use the Keck telescopes to investigate many questions. What is one question the Keck telescopes would NOT help scientists answer
Answers
Answer:
Option D
Explanation:
The options for the question are
a) How do galaxies rotate?
b) What is the weather on Neptune?
c) What is the core of Saturn made of?
d) What other solar systems have planets?
Solution
The Hubble space telescope was designed and integrated into the extraterrestrial system in order to capture information about the surrounding universe. If the Keck Observatory has a better observation capacity than the Hubble space telescope then the scientist would be interested to know the surrounding planets in the solar system.
Hence, option D is correct
Explain why the poles are colder than the tropics.?
Answers
A student uses the circuit shown to determine the resistance of two identical resistors.
H--
А.
V
The voltmeter reading is 2.2V and the ammeter reading is 0.25A.
What is the resistance of each resistor?
A 0.2752
B
0.552
C 4.4Ω
D
8.82
Answers
Answer:
B. 0.552
Explanation:
To find the resistance in the circuit above, u simply divide the current in the circuit by the voltage to get the resistance.
a bag of sugar is found to have the same weight on planet earth as an identical bag of dry sawdust on planet Jupiter explain why the masses of the two bags must be different
Answers
Answer:
Because Jupiter is a much larger planet than Earth, its gravitational pull is 240% stronger than that of earth. This is why sawdust, which is lighter than its equivalent measure of sugar would weigh more on Jupiter.
Explanation:
Let's assume that a type of bag can contain 50 kilograms of sugar. If that same bag was filled up with sawdust instead, it would weigh far less than 50Kg.
If that bag of sawdust, on earth weighed 35Kg for instance, on Jupiter, the new weight would be:
35Kg x 2.4 = 84Kg
Put differently, Jupiter simply has a stronger gravitational pull than earth. This extra pull is attributed to its size.
Cheers
1
The distance between objects, along with the masses of the object, affect the gravitational force between the objects. Which
statement is TRUE according to Newton's law of universal gravitation?
O When the masses of objects increase, gravitational force decrease
O When the distance between objects increases, gravitational force decreases.
O When distances between objects decreases, gravitational force decreases
O When the masses of objects decrease, the distance between objects decreases.
Answers
Every object in the universe attracts every other object with a force along a line joining them. The force is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers of mass.
Eroded debris that is dropped at the glaciers farthest extent when ice melts at the front of the glacier as seen in the image is called
A. Terminal Moraines
B. Lateral Moraines
c. Gradient
D. Striations
Answers
Answer:
A) terminal moraines
Explanation:
Moraines are the rocks and sediments deposited by moving glaciers. Terminal means the end, the furthest the glacier travels. Lateral means what's deposited along the sides of the moving glacier.
A 56.6-kg crate rests on a level floor at a shipping dock. The coefficients of static and kinetic friction are 0.517 and 0.260, respectively. What horizontal pushing force is required to (a) just start the crate moving and (b) slide the crate across the dock at a constant speed
Answers
Answer:
Explanation:
Magnitude of frictional force = μ mg
μ is either static or kinetic friction.
To start the crate moving , static friction is calculated .
a ) To start crate moving , force required = μ mg where μ is coefficient of static friction .
force required =.517 x 56.6 x 9.8 = 286.76 N .
b ) to slide the crate across the dock at a constant speed , force required
= μ mg where μ is coefficient of kinetic friction , where μ is kinetic friction
= .26 x 56.6 x 9.8 = 144.21 N .
The force of ____________ exists between any two objects that have mass.
free fall
acceleration
weight
gravity
Answers
Answer:
gravity
Explanation:
A car travels from A to B and from B back to A.If the distance between A and B is 12 km and it took 20 minutes to travel full , then the average speed and average velocity of the car is
Answers
Answer:
Average speed = 0, Average velocity = 0.02 m/s
Explanation:
Given that,
A car travels from A to B and from B back to A.
The distance between A and B is 12 km
It took 20 minutes to travel full.
We need to find the average speed and the average velocity of the car.
As the car reaches the point from where it was started, the displacement of the car is equal to 0. As a result, the average velocity is equal to 0.
For average speed,
[tex]s=\dfrac{12+12}{60\times 20}\\\\s=0.02\ m/s[/tex]
Hence, this is the required solution.
A bus travels to and from a school that is located 10 km to the west. What is the distance? What is the displacement?
Answers
20 km
Hope this helps Have a good day
The distance between two successive crests of a certain transverse wave is 1.40 m. Eight crests (7 waves) pass a given point along the direction of travel every 15.0 s. How fast are the waves traveling
Answers
Answer:
the speed of the wave is 0.65 m/s
Explanation:
Given;
distance between two successive crests, λ = 1.4 m
number of crests, n = 8
number of waves formed = 7
The total distance covered by the wave, d= 7λ = 7 x 1.4 = 9.8 m
time of motion of the wave, t = 15 s
The speed of the wave is calculated as;
V = d/t
V = 9.8 / 15
V = 0.65 m/s
Therefore, the speed of the wave is 0.65 m/s
Which example below is the most complex component of a multicellular organism?
Question 20 options:
Skin cell
Heart
Muscle Tissue
Reproductive System
Answers
One pot has a water height of 8cm. Calculate the water pressure at the bottom of the pot. They give g = 10N / kg p = 1000kg / m3
Answers
Answer:
P = 800 Pa
Explanation:
The pressure of water at the bottom of the pot can be given by the following formula:
[tex]P = \rho g h[/tex]
where,
P = Pressure at the bottom of the pot = ?
ρ = density = 1000 kg/m³
h = height of water = 8 cm = 0.08 m
Therefore,
[tex]P = (1000\ kg/m^3)(10\ m/s^2)(0.08\ m)[/tex]
P = 800 Pa
A person just supports a mass of 20kg suspended from a rope.
to
20 kg
What is the resultant force acting on the mass?
A ON
B10N
с
20N
D
200N
Answers
Answer:
F = 200 N
Explanation:
Given that,
The mass suspended from the rope, m = 20 kg
We need to find the resultant force acting on the rope. The resultant force on the rope is equal to its weight such that,
F = mg
Where
g is acceleration due to gravity
Put all the values,
F = 20 kg × 10 m/s²
F = 200 N
So, the resultant force on the mass is 200 N.
Solve for resistance. I do not get it. Pls help
Answers
Answer: I think a
Explanation:
En una práctica un beisbolista lanza verticalmente la bola con una velocidad de 12m/s en dirección ascendente. ¿Cuál será la altura máxima que alcanza la pelota?
Answers
Answer:
Thus, the maximum height is 7.35 m.
Explanation:
initial velocity, u = 12 m/s
acceleration due to gravity, g = 9.8 m/s^2
Velocity at maximum height, v = 0 m/s
Let the maximum height is h.
Use third equation of motion
[tex]v^{2}=u^{2}-2 g h\\0 = 12\times 12 - 2 \times 9.8\times h\\h =7.35 m[/tex]
An argon gas occupies 56.2 L at 760 torr. If the volume of gas dereases to 1/4 of the original volume ,calculate its final pressure
Answers
Answer:
3040 torr
Explanation:
Applying,
PV = P'V'..................... Equation 1
Where P = Initial Pressure, V = Initial volume, P' = Final pressure, V' = Final volume.
Make P' the subject of the equation
P' = PV/V'................. Equation 2
From the question,
Given: P = 760 torr, V = 56.2 L, V' = 56.2/4 = 14.05 L
Substitute these values into equation 2
P' = (56.2×760)/14.05
P' = 3040 torr
PLS HELP. URGENT.
I WILL MARK HIM/HER AS BRAINLIEST.
Answers
Answer:
Explanation:
frequency=1/time period
50=1/time
time=1/50
time=0.020 s
Answer: A
Explanation:
Pop up spring Lab
Describe the energy conversion that took place. What energy was present just before the jump? What energy is present at its maximum height? What happens in between?
Draw bar charts of energy before the jump, while the spring toy is compressed and after the jump at the maximum height of its jump. Be sure to label each type of energy.
Answers
Answer:
I honestly don't know but that thing looks cool lol
what is the dimension formula of power and pressure
Answers
Answer:
Power = ML²T⁻³
Pressure = ML⁻¹T⁻²
Explanation:
Applying,
Power(P) = Work(W)/Time(t)
P = W/t..................... Equation 1
But
W = Fd............. Equation 2
Where F = force, d = distance
Also,
F = ma.............. Equation 3
Where m = mass, a = acceleration.
Also,
a = v/t................ Equation 4
Where v = velocity
Also,
v = d/t............... Equation 5
Where d = distance
Substitute equation 5 into equation 4
a = d/t²................. Equation 6
Substitute equation 6 into equation 3
F = m(d/t²)........... Equation 7
Susbtitute equation 7 into equation 2
W = m(d/t²)×d
W = md²/t²........... Equation 8
Substitute equation 8 into equation 1
P = (md²/t²)/t
P = md²/t³............ Equation 9
In dimension,
mass(m) = M, distance(d) = L, time(t) = T
Substitute into equation 9
P = ML²/T³
P = ML²T⁻³
And
Pressure(R) = Force(F)/Area(A)
R = F/A................ Equation 10
F = md/t²,
A = d²
Susbtitute into equation 10
R = (md/t²)/d²
R = m/t²d
Therefore,
R = ML⁻¹T⁻²
58
74
3 points
A hummingbird beats its wings up and down with a frequency of 100 Hz. What is the period of the hummingbirds flaps? (D
YOUR ANSWER)
59
Answers
Answer:
T = 0.01 s
Explanation:
Given that,
The frequency of the beats of a hummingbird, f = 100 Hz
We need to find the period of the hummingbirds flaps. Let the time is t. We know that the relation between frequency and time period is given by :
T = 1/f
Put all the values,
T = 1/100 = 0.01 s
So, the time period of the humming bird is 0.01 s.
What are the four components to a workout program?
Answers
Answer:
Aerobic Fitness. Aerobic fitness improves overall health and well-being. ...
Muscular Fitness. Strength training improves your muscle and bone health and helps with weight loss. ...
Flexibility. Flexibility allows you to move your body freely. ...
Stability and Balance
Explanation:
UP
In an electric circuit, 40 C of electric charge pass a point in 5.0 s.
What is the current in the circuit?
A 0.13A
B
8.0A
C 45A
D
200 A
Answers
Answer:
Explanation:
current=amount of charge/time taken
=40/5
=8 ampere(A)
The current flowing in the circuit is 8 A.
The correct answer to the question is Option B. 8 A.
Quantity of electricity, current and time are related by the following equation:
Q = ItWhereQ is the quality of electricity.
I is the current.
t is the time.
With the above formula, we can obtain the current in the circuit as illustrated below:Quantity of electricity (Q) = 40 C
Time (t) = 5 s
Current (I) =?Q = It
40 = I × 5
Divide both side by 5
I = 40 / 5
I = 8 AThus, the current in the circuit is 8 A.
The correct answer to the question is Option B. 8 A
Learn more: https://brainly.com/question/21690385
The amount of water in rivers and lakes is always changing due to inflows and outflows. Based on the information in this passage and the diagram, what are these inflows and outflows part of?
A: the evaporation process
B: the water cycle
C: the precipitation process
D: human-controlled systems
Answers
Answer:
B. Water Cycle
Explanation: