Answers
Gravitational to kinetic: A child going down a slide on a playground.
Elastic to kinetic: A boy shooting a rubber band across the classroom.
Chemical to thermal: Using a gas power heater to warm a room.
Electrical to radiant: Using the light in your room that is plugged into a wall.
Kinetic to thermal: Rubbing your hands together to warm them on a cold day.
Electrical to kinetic: Using a DC electric motor.
Kinetic to electric: Using a hand crank generator to produce electric current.
Related Questions
What is the name of the anion in sodium carbonate?
Answers
Answer: Sodium salt
Explanation: sorry if this is wrong
Sort the numbers based on the number of significant figures they have.
Drag each tile to the correct location.
One Significant
Figure
Two Significant
Figures
Three Significant
Figures
Four Significant
Figures
Answers
Answer:
I think one significant figure??
Which shape is being shown by the model?
Answers
What is the molarity of 2.5 mol of H2SO4 dissolved in 1.00 L of solution?
Need FAST!
Answers
Answer:
2.5 M H2SO4
Explanation:
2.5 mol / 1.00 L = molarity of 2.5
5.
Which is the best example of Newton's Second Law of Motion?
Answers
Answer:
ok so if I remember correctly then it basically its like if I have a baseball and throw it full force the the ball will go far because the mass is light and the force was great but if I get a bowling ball and do the same with equal force it will go shorter than the base ball because the mass if more than the force I put in
Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)
Answers
The given question is incomplete. The complete question is:
Write the electron configuration for [tex]Ca^+[/tex] . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for [tex]Ca^{2+}[/tex] . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for [tex]Se^{2-}[/tex] . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for [tex]S^{2-}[/tex]. (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)
Answer:
[tex]Ca^+:19:[Ar]4s^1[/tex]
[tex]Ca^{2+}:18:[Ar][/tex]
[tex]Se^{2-}:32:[Ar]3d^{10}4s^24p^2[/tex]
[tex]S^{2-}:18:[Ar][/tex]
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom.
The electrons are filled according to Afbau's rule in order of increasing energies. The positively charged species are formed by loss of electrons and negatively charged species are formed by gain of electrons.
[tex]Ca:20:[Ar]4s^2[/tex]
[tex]Ca^+:19:[Ar]4s^1[/tex]
[tex]Ca^{2+}:18:[Ar][/tex]
[tex]Se:34:[Ar]3d^{10}4s^24p^4[/tex]
[tex]Se^{2-}:36:[Ar]3d^{10}4s^24p^6[/tex] or [tex]Se^{2-}:36:[Kr][/tex]
[tex]S:16:[Ne]3s^23p^4[/tex]
[tex]S^{2-}:18:[Ne]3s^23p^6[/tex] or [tex]S^{2-}:18:[Ar][/tex]
What do these two changes have in common? Shaking up salad dressing. Adding dish soap to water in a sink
Answers
Are real or ideal gases used in labs?
Answers
Match it, I’m not sure which category they go in
Answers
Answer:
Endothermic is something that needs heat added into it, while exoteric gives heat off
Explanation:
1. Endo(Melting ice)
2. Endo(heat enters the system)
3. Exothermic(making ice)
4. Endothermic( liquid to gas)
5. Exothermic(campfire)
6. exothermic(gas to a liquid)
7. Exothermic (the flame of a candle)
8. Exothermic (heat leaves the system)
9. I don’t know if photosynthesis is exo or endothermic
A gas occupies 5.31 liters at a pressure of 0.55 atm. Determine the volume at standard pressure.
A. 2.92
B. 8.28L
C. 3.54 L
D. 9.65L
Answers
Answer:
Option A; V = 2.92 L
Explanation:
If we assume a lot of things, like:
The gas is an ideal gas.
The temperature is constant.
The gas does not interchange mass with the environment.
Then we have the relation:
P*V = n*R*T = constant.
Where:
P = pressure
V = volume
n = number of moles
R = constant of the ideal gas
T = temperature.
We know that when P = 0.55 atm, the volume is 5.31 L
Then:
(0.55 atm)*(5.31 L) = constant
Now, when the gas is at standard pressure ( P = 1 atm)
We still have the relation:
P*V = constant = (0.55 atm)*(5.31 L)
(1 atm)*V = (0.55 atm)*(5.31 L)
Now we only need to solve this for V.
V = (0.55 atm/ 1 atm)*(5.31 L) = 2.92 L
V = 2.92 L
Then the correct option is A.
Help please...........
Answers
Describe the stages of water cycle
Answers
Hope this helps!
In an experiment, the molar mass of the compound was determined to
be 228.276 g/mol. What is the molecular formula of the compound? Please help!
Answers
For example, a molecule has a molecular weight of 180.18 g/mol. It is found to contain 40.00% carbon, 6.72% hydrogen and 53.28% oxygen.
Convert the percentages to grams.
40.00 grams of carbon
6.72 grams of hydrogen
53.28 grams of oxygen
Why does our body need to use both mechanical and chemical digestion when we are breaking down our food?
Answers
Answer:
Chemical digestion is a vital part of the digestive process. Without it, your body wouldn't be able to absorb nutrients from the foods you eat, also chemical digestion uses enzymes to break down food
mechanical digestion involves physical movements, such as chewing and muscle contractions,
Explanation:
What category of biological molecules are steroids included in?
Answers
Answer:
Lipids
Explanation:
Lipids are a class of macromolecules that are nonpolar and hydrophobic in nature. Major types include fats and oils, waxes, phospholipids, and steroids.
Hope this helps!
(04.04 MC)
Which table best shows the impacts resulting from human activity? (6 points)
Answers
Answer:
B
Explanation:
Answer:
B its correct because i did the test.
Explanation:
True or False: Air pollution contributes to global warming.
A. True
B. False
Answers
Explanation -
Burning fossil fuels releases gases and chemicals into the air. And in an especially destructive feedback loop, air pollution not only contributes to climate change but is also exacerbated by it. Air pollution in the form of carbon dioxide and methane raises the earths temperature.
Hope this helps :)
Hope you have a great day !
2.0 mole of water at STP would occupy what volume?
a) 22.4
b) 22.7
c) 44.8
d) 45.4
plzzz help me
Answers
How does nitrogen-fixing bacteria make nitrogen available to plants and animals?
Answers
Answer:
hi thxs for the points now bye
Answer:
Nitrogen-fixing bacteria in the soil and within the root nodules of some plants convert nitrogen gas in the atmosphere to ammonia. Nitrifying bacteria convert ammonia to nitrites or nitrates. Ammonia, nitrites, and nitrates are all fixed nitrogen and can be absorbed by plants.
Explanation:
Hope It Help
what metric unit would be most appropriate to use when measuring the length of a paperclip?
A. millimeter
B. kilometer
C. decimeter
D. centimeter
Answers
centimetres
Explanation:
centimetres
Answer:
D. Centimeter is used when measuring the length of a paperclip
i really kinda need some hell right now :)
Answers
Now run this simulation that demonstrates the properties of gases. The simulation shows a container with a lid on top. The lid can be opened and closed by dragging it left and right. On the left side of the container is a yellow handle. Drag this handle right or left to decrease or increase the volume of the container. On the top right of the container are a thermometer and a pressure gauge. Follow these steps to use the simulation, and then answer the question that follows. 1. Reduce the container to its least volume by dragging the yellow handle as far right as you can. 2. In the Gas in Chamber menu, add 80 molecules of heavy species to the container. 3. In the Constant Parameter menu, select Pressure. 4. Increase the number of heavy species molecules to 200. What do you observe when the molecules are increased from 80 to 200 at constant pressure?
link http://contentstore.ple.platoweb.com/content/sharedmedia/phet_sims_batch2/gas-properties/gas-properties_en.html
Answers
Answer:
The pressure will increase linearly if you increase the moles/molecules of gas
Explanation:
The temperature of water decreases on the dissolution of NH4NO3. From this observation, we can conclude that the solution process would be best described asa)exothermic with a positive entropy change.b)exothermic with a negative entropy change.c)endothermic with a negative entropy change.d)endothermic with a positive entropy change.e)exothermic with a negative free energy change
Answers
Answer: d)endothermic with a positive entropy change
Explanation:
Endothermic reactions are those in which heat is absorbed by the system and exothermic reactions are those in which heat is released by the system.
Entropy is the measure of randomness or disorder of a system. If a system moves from an ordered arrangement to a disordered arrangement, the entropy is said to decrease and vice versa.
As temperature of water decreases on dissolution of [tex]NH_4NO_3[/tex] , it means heat has been absorbed by [tex]NH_4NO_3[/tex] during dissolution and that heat is taken from water. Thus process is endothermic. As dissolution will lead in the formation of ions [tex]NH_4^+[/tex] and [tex]NO_3^-[/tex] , randomness will increase and thus there is a positive entropy change.
thats ridiculously ridiculous
Answers
Answer: beautiful
Explanation:
Calculate the formula weight or molecular for the following:
a. LiCI
b. SO2 (The 2 is in subscript)
Answers
Answer:
42.39, 64.06
Explanation:
Formula Weight can be calculated by adding the atomic mass of the elements in the formula.
LiCl
AM for Li is 6.94 amu, AM for Cl is 35.45 amu
[tex](6.94)+(35.45)=42.39[/tex]
SO₂
AM for S is 32.06 amu, AM for O is 16 amu
[tex](32.06)+2(16.00)=64.06[/tex]
How many moles of H20 are needed to produce 1 mole of O2 in the following equation?
2H2O + 2H2 + 102
Answers
24. Explain what happens at the particle level when a solid melts.
Answers
Answer:
When a solid is heated the particles gain energy and start to vibrate faster and faster. ... At this point the solid is melting to form a liquid. The particles in the liquid are the same as in the solid but they have more energy.
Explanation:
sana maka help
Why is having a healthy lion population in an African savanna important for maintaining biodiversity in that ecosystem?
C
If the population of lions decreases, there would be less water available for other animals like zebras and antelopes, leading to drought in the ecosystem.
.
The lions are better at hunting animals like zebras and antelopes, ensuring that other predators like cheetahs and hyenas will be outcompeted and eventually become
extinct.
.: +
O
The lions eat enough of the zebras, antelopes, and other plant-eating animals to ensure that they do not overgraze the grass and trees, leading to starvation of the other
animals.
Without the lions to eat animals like zebras and antelopes, there would be fewer predators to consume these animals, causing the zebras and antelopes to consume each
other.
K
Type here to search
AQDd
1:45 PM
3/11/2021
Answers
Answer:c
Explanation:
The healthy lion population in the African savanna has been important as the decrease in the population of lions results in the increase in the increased population of zebras and antelopes and thereby the increased overgrazing. Thus, option C is correct.
In an ecosystem, the biotic components have been arranged in the pyramidical order that has been able to maintain a healthy ecosystem.
The increase or decrease in the level of the ecosystem results in the disturbed ecosystem and thereby the biodiversity. The African savanna has been the forest ecosystem. It has been photosynthetic plants, followed by primary, secondary, and tertiary consumers.
The lion has been the secondary consumer in the forest system. The lions have been able to consume the primary consumers and maintain the balance in the ecosystem.
However, with the decrease in the lion population in the ecosystem, there has been a proportional increase in the population of the primary consumers such as zebras, and antelopes.
The increase in primary consumers results in overgrazing and thereby the starvation of other primary consumers with a decrease in the producers.
Thus, a decrease in the lion population results in disturbing the biodiversity of the ecosystem with an increase in the population of zebras and antelopes. Thus, option C is correct.
For more information about the African Savannas ecosystem, refer to the link:
https://brainly.com/question/4088008
An airplane flew 3043 km from Houston to Seattle in 5.5 hours. What was the average speed, in m/s rounded to the nearest hundredth, of the airplane from Houston to Seattle?
Answers
An airplane flew 3043 km from Houston to Seattle in 5.5 hours. What was the average speed, in m/s rounded to the nearest hundredth, of the airplane from Houston to Seattle?
The answer is 553
Answer:
553
Explanation:i did this question today and it was right!
50 points
In the image below, light is displayed as particles called photons. Research to find out what photons are and then explain in your own words why they can be useful for modeling light.
Answers
Answer:
A photons is a particle representing a quantum of light or other electromagnetic radiation. A photon carries energy proportional to the radiation frequency but has zero rest mass.
Explanation:
Light consists of packets of energy (photons) that can only interact with the atoms and molecules of matter by being absorbed or emitted in discrete units. ... Photons carry momentum and energy like particles, but they also have a frequency and a wavelength like a sinusoidal wave. Thanks to photons we know that all quantum particles have both the properties of waves and particles. I hope it helps✌️