PLS HELP ME!!!
The engine cars that pull high-speed trains usually taper to a point in front, as shown in the illustration. How does this shape change the forces acting on the moving engine car?

Answer:

True, wheel and excel has co-axial cylinder. true or false.

You can follow me to get more answer.

Answer:

true

Explanation:

yes they have two com xial cylinder and they work together

Answer: that Christians should not withdraw from the world, but should actively participate in the ... That is perhaps the reason why there is currently such an ... Investigating the root causes and consequences of corruption may contribute to a more.

Explanation:

Answer:

Explanation:

I just did the Gizmo and the correct answer is 12 :) Hope this helps!

The total resistance of the circuit for parallel resistors of 41 Ω and 17 Ω is 12Ω. Hence option D is correct.

When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig).  The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.

[tex]\frac{1}{R_{s}} = \frac{1}{R_{1}} + \frac{1}{R_{2} } + \frac{1}{R_{3}} ..........+ \frac{1}{R_{n} }[/tex]  where Rs is the equivalent or total resistance of the circuit.

In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.

When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.

equivalent resistance for series combination is given by,

R(s) = R₁ + R₂ + R₃...........+R(n).

In this problem given resistance are not seen, Resistor can be with 41 and 17Ω.

Given,

R₁ = 17 Ω

R₂ = 41 Ω

[tex]R_{s} = ?[/tex]

by parallel combination,

[tex]\frac{1}{R_{s}} = \frac{1}{R_{1} } + \frac{1}{R_{2} }[/tex]

[tex]R_{s} = \frac{R_{1} R_{2} }{R_{1} + R_{2} }= \frac{17*41}{17+41} = \frac{697}{58} = 12[/tex]

R = 12 Ω.

Hence option D is correct.

To know more about Resistor :

https://brainly.com/question/24297401

#SPJ3.

Answer:

Part A

The sound intensity at the location 150 from the firework = 4.3[tex]\overline 5[/tex] W/m²

Part B

The power the firework is emitting is approximately 1,231.5 kW

Explanation:

Part A

The data of the firework sound heard by the two friends are;

Let 'A' represent the location of the friend at a point 150 m from the fireworks and let 'B' represent the location of the friend watching from a distance of 700 m from the firework

The distance of 'A' from the sound, r₁ = 150 m

The distance of 'B' from the sound, r₂ = 700 m

The intensity at which 'B' hears the sound, I₂ = 0.2 W/m²

The relationship between sound intensity and distance is given as follows;

[tex]\dfrac{I_2}{I_1} = \left (\dfrac{r_1}{r_2} \right )^2[/tex]

[tex]\therefore {I_1} = \dfrac{I_2}{ \left (\dfrac{r_1}{r_2} \right )^2} = I_2 \times \left (\dfrac{r_2}{r_1} \right )^2[/tex]

Plugging in the values gives;

[tex]\therefore {I_1} = 0.2 \times \left (\dfrac{700}{150} \right )^2 = \dfrac{196}{45} = 4.3\overline 5[/tex]

The sound intensity at location 'A', I₁ = 4.3[tex]\overline 5[/tex] W/m²

Part B

The relationship between power, 'P', and intensity, 'I', is presented as follows;

[tex]I = \dfrac{P}{4 \cdot \pi \cdot r^2}[/tex]

P = I·4·π·r² = 4·I·π·r²

Therefore, at point 'A', where the distance, r₁ = 150 m, and the intensity, I₁ = 4.3[tex]\overline 5[/tex] W/m², we have;

P = 4 × 4.3[tex]\overline 5[/tex] W/m² × π × (150 m)² = 1231504.32021 W

The power the firework is emitting, P ≈ 1,231.5 kW.

Answer:

Q_c = Q_abs

Explanation:

You are asked to describe the process when placing a hot block in cold water.

The first thing to do is put all the quantities in the same units

block temperature      T_bloque = T_h = 300 K = 300 -273 = 27ºC

water temperature     T_water = T_c = 15ºC

* initially the block cools down decreasing its temperature

* the water temperature increases

* the equilibrium is established when the thermal energy of the two bodies is equal, therefore they have the same temperatures T_f

* Conservation of energy requires that the energy released by the hot block is equal to the energy absorbed by the cold body (water)

transferred thermal energy Q_c = m_block ce_block (T_h-T_f)

absorbed thermal energy Q_abs = m_agua ce_agua (T_f - T_c)

* if we subtract the energy transferred and the absorbed gives zero, therefore the net energy transferred is zero

                               Q_c = Q_abs

The equivalent resistance of the circuit is 65.98 Ω.

What is Resistor?

A resistor is an electrical component that limits or regulates the flow of electrical current in a circuit. It is designed to provide a specific amount of resistance to the flow of electrons, measured in ohms, and is typically made of a material that can resist the flow of electricity, such as carbon or metal. Resistors are used in a wide range of electronic devices and circuits, from simple LED flashers to complex computer systems.

To find the equivalent resistance of the circuit, we need to use the formula for resistors in parallel:

1/Req = 1/R1 + 1/R2 + 1/R3 + 1/R4

where Req is the equivalent resistance, and R1, R2, R3, and R4 are the resistances of the four resistors.

Substituting the given values, we get:

1/Req = 1/6.60 × 102 + 1/2.40 × 102 + 1/2.00 × 102 + 1/2.00 × 102

1/Req = 0.01515

Req = 65.98 Ω

Therefore, the equivalent resistance of the circuit is 65.98 Ω.

Learn more about Resistor from given link

https://brainly.com/question/17563681

#SPJ1

Answer:

When blood vessels constrict, the flow of blood is restricted or decreased, thus retaining body heat or increasing vascular resistance. this makes the skin turn paler because the blood reaches the surface, reducing the radiation of heat. hope this helps

Answer:  ultraviolet

Explanation:

Answer:

0.140

Explanation:

may i be marked brainliest

Answer:

[tex]g=2.513m/s^2[/tex]

Explanation:

From the question we are told that:

Mass Taken [tex]m=100g \approx 100*10^{-3}[/tex]

Strain on Spring [tex]l_s=22.6cm \approx 22.6*10^{2}[/tex]

Distance pulled down [tex]d_d=10.9[/tex]

Time for ten oscillations take [tex]t=18.8s[/tex]

Generally the equation for angular velocity is mathematically given by

[tex]\omega=2\pi\\\omega=2\pi*\frac{10\ oscillations}{t}\\\\\omega=2\pif=2\pi*\frac{10\ oscillations}{18.8}\\Also\\\omega=\sqrt{\frac{k}{m}} \\\omega=\sqrt{\frac{k}{100*10^{-3}}}[/tex]

Therefore

[tex]{2\pi*\frac{10\ oscillations}{18.8}}=\sqrt{\frac{k}{100*10^{-3}}} \\k=\sqrt{2\pi*\frac{10\ oscillations}{18.8}}*100*10^{-3}\\k=1.112N/m[/tex]  

Generally the equation for Acceleration due to gravity is mathematically given by

[tex]F=mg\\mg=k l_s\\g=\frac{k l_s}{m}\\g=\frac{1.112*2.6*10^{2}}{100*10^{-3}}[/tex]

[tex]g=2.513m/s^2[/tex]

Answer:

Juno scientific payload includes:

Explanation:

Each mission of NASA has a specific set of instruments that it uses to perform scientific experiments on the desired heavenly body. In case of Juno, the mission for Jupiter has a series of instruments that would study domains of gravitational forces, magnetic effect, particle detection, radiation detection, UV/IR imaging, and plasma experiments.

Answer:

its lost 91

Explanation:

Explanation:

Momentum of an object is defined as the product of the mass of object and the velocity with which it is moving.

p = mv

where, p = momentum, m= mass and v= velocity

mass m = 0.7 Kg and v = 20 m/s

p = 0.7×20 = 14 Kg-m/sec

Therefore, momentum of the object  = 14 kg-m

Answer: When a liquid substance is poured into a vessel, it takes the shape of the vessel, and, as long as the substance stays in the liquid state, it will remain inside the vessel. Furthermore, when a liquid is poured from one vessel to another, it retains its volume (as long as there is no vaporization or change in temperature) but not its shape.

Explanation: A solid has a definite shape and volume. A liquid has a definite volume, but takes the shape of its container. A gas lacks either a defined shape or volume. Plasma is similar to a gas in that its particles are very far apart, but a gas is electrically neutral and plasma has a charge.

Answer:

B

Explanation:

Liquid

Answer: 5.39g/L

Explanation:

We need to calculate the average molar mass of the mixture which will be:

= (10 × 32) + (50 × 40) + (40 × 244) / 100

= (320 + 2000 + 9760) / 100

= 12080 / 100

= 120.8g/mol

Since the volume occupied is 22.4L and 1 mole of the gas will occupies 22.4L given the standard temperature conditions, then the density of the mixture will be:

= Mass / volume

= 120.8 / 22.4

= 5.39g/L

Therefore, the density of the mixture will be 5.39g/L.

Answer:

I know that F=Gm1m2/r^2 or F=GMn/r^2 and G is like the universal gravitational constant so I hope this helps

Answer:

The action of erosion alone can change the earth's surface. Erosion can wash away nutrients on the earth's surface, change the appearance of the soil of a particular area over time, can bore holes, that form caves, change landscapes for example when the earth is hit with gully erosion by continuous water runoff over time. Erosion can move soil to a new area.

Explanation:

Weathering involves breaking down rock into smaller pieces without any form of formal movement of those broken rock pieces. These processes that can lead to weathering are caused by mechanical, chemical, and organic processes which can happen over time. Erosion can now move broken rock pieces or soil to another place by water or wind. Weathering and erosion constantly change the Earth's surface.

Answer:

Option C, The 30 m telescope can observe objects 9 times fainter, and with 3 times smaller angular size, than the 10 m telescope.

Explanation:

As we know,

The surface brightness of the object viewed through telescope is proportional to the square of the diameter of the lens

Thus, Brightness ([tex]B_{30}[/tex]) of 30 m telescope would be proportional to [tex]30^2[/tex]

Brightness of 10 m ([tex]B_{10}[/tex]} telescope would be proportional to [tex]10^2[/tex]

Thus, the ration of the two would be

[tex]\frac{B_{30}}{B_{10}} = \frac{30^2}{10^2} \\\frac{B_{30}}{B_{10}} = \frac{9}{1} \\B_{30} = 9 * B_{10}[/tex]

Thus, brightness of 30 m telescope would be able to view 9 times fainter object as compared to the 10 m telescope.

Also , 30 m telescope would be able to view 3 times smaller angular sized object as compared to the 10 m telescope

Hence, option C is correct

Answer:

The arrangement of the following from loudest to softest include:

crowd at sporting event

airplane

rainfall

whisper

Explanation:

When it comes to the arrangements, the pitch of the noise which emerge is what was considered. For example, crowd at sporting event has the highest pitch especially during football matches followed by the airplane sounds during its take-off and landing in the airports. As for whisper, it happens to be the one with softest sound.

Answer:

Airplane. 1

Whisper. 4

Crowd at sporting event. 2

Rainfall. 3

Explanation:

hope this helps

The angular velocity is the ration of the change in the angle turned to time.

The angular velocity is the ration of the change in the angle turned to time. As such, the angular velocity is measured in radians per second. We have been told that the athlete is supposed to perform the jump between figures 1 and 2 in multiple somersaults.

Each time the athlete somersaults, the angular velocity changes. As such, the rate of change of the angular velocity between figures 1 and 2 would be quite high.

On the other hand, the athlete jumps straight vertically down between figures 2 and 3 and does not turn. Hence, the angular velocity decreases.

Learn more about angular velocity:https://brainly.com/question/13649539

#SPJ1

Answer:

Mass (m) = 5.4 kg

Force (f) = 20 N

Acceleration (a) = ?

Acceleration= m × a

[tex]m \times a \\ = 5.4 \times 20 \\ = 108 \: ms ^{ - 2} [/tex]

=> The resulting acceleration of the object is 108 m/s².

Answer:

140

hope this helps

have a good day :)

Explanation:

Answer:

When plane waves cross a boundary at a non-zero angle to the boundary, each wavefront experiences a change in direction and wavelength

Explanation:

Waves that cross the boundary from one medium to another, that have different densities at an angle to the boundary between the two medium is refracted (bent) in the second medium and experiences a change in direction and speed due to a change in the wavelength of the wave

Answer:

by 81

Explanation:

KE = (1/2)mv^2. If v2 ---> 9v then

KE2 = (1/2)m(9v)^2 = 81[(1/2)mv^2]

= 81 KE

Answer:

by a factor of 4

Explanation:

The kinetic energy is proportional to the square of the speed so doubling the speed increases.

Answer:

Aircraft never crash because of one single issue. It's almost always a combination of factors that lead to an accident. Whilst flying is extremely safe, typical reasons why planes crash include pilot error, technical failures, bad weather, terrorism, and pilot fatigue.

Answer The force of the air pushing up on the plane is

equal to the force of gravity pulling down on the

plane.

Answer:Earth has more mass than the car.

in the question

Answer:

hi how are you

2) 5/8

4) 5/8

Answer:

Aluminum hydrochloric acid

Explanation:

Aluminum reacts with diluted hydrochloric acid at room temperature. The metal aluminium dissolves in hydrochloric acid, producing aluminum chloride and colorless hydrogen gas. The reaction taking place between aluminium and hydrochloric acid is irreversible. And the final products will not react with each other.